LC4032ZC-5T48I - 5 ns 32-MC CPLD | Lattice Semiconductor
料号: LC4032ZC-5T48I ✗ 停产LC4032ZC-5T48I 概述
A CPLD, or complex programmable logic device, is a user-programmable semiconductor that converts digital logic descriptions into deterministic hardware. The ispMACH 4000 architecture combines programmable logic blocks, programmable interconnect, dedicated global-clock resources, and in-system programmability. Within the broader hierarchy, a CPLD is a programmable logic device, a digital IC, and a semiconductor used to implement glue logic, control functions, interfaces, and compact subsystem logic.
Key features include four programmable global-clock pins, support for 1.8 V, 2.5 V, and 3.3 V operation, a 400 MHz maximum operating frequency, and up to 32 user I/Os. The 5 ns speed designation identifies the target propagation-delay class, while the 4.4 ns propagation-delay figure describes the device's stated logic timing. In-system programming allows a programmed configuration to be updated through the device interface without relying on a separate external programming fixture.
The LC4032ZC-5T48I is intended for designs requiring a practical balance between logic density, pin count, and predictable timing. Its 32 macrocells provide more integration than basic GAL-type devices, while the dedicated global-clock resources simplify clock distribution across synchronous control logic. Multiple I/O arrangements around the package support parallel data paths, although the exact bank and voltage rules should be checked against the manufacturer's pin-description and electrical tables before PCB implementation.
Typical applications include industrial control and instrumentation, communication-interface glue logic, test and measurement equipment, embedded system control, and general-purpose programmable interface logic. The device is particularly useful when a design requires more routing flexibility and deterministic control than a small combinational PLD but does not need the software toolchain and resource structure of an FPGA.
The primary PCB consideration is correct voltage-compatible I/O assignment. Use the manufacturer pin-description table to identify power, ground, configuration, clock, and user-I/O functions before routing. Decoupling and signal-integrity practices should follow the datasheet's recommended power-network layout, with short return paths and deliberate handling of configuration pins to prevent unintended programming states.
This product record combines device specifications, timing and density information, practical implementation guidance, and a package-matched comparison focused on engineering selection. It is intended to help designers identify the correct Lattice option, plan the footprint and power architecture, and confirm that a candidate replacement preserves the LC4032ZC-5T48I's essential electrical and timing constraints.
直接替换替代料: LC4032ZC-5T48I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LC4032ZC-5T48I (相同外形与封装尺寸) ——差异在于 Device Type, Package, Propagation Delay, Maximum Operating Frequency, Global Clock Inputs.
LC4032ZC-5TN48I
✅ 直接替换📋 参考替代料(不在目录中)
LC4032ZC-5T48C
✅ 直接替换联系询价
查看数据手册 →LC4032C-5T48I
✅ 直接替换联系询价
查看数据手册 →LC4032B-5T48I
✅ 直接替换联系询价
查看数据手册 →LC4032ZC-5T48I 最大额定值与电气特性
| Device Type | In-System Programmable SuperFAST High-Density PLD (CPLD) |
| Architecture | ispMACH 4000 |
| Macrocell Count | 32 macrocells |
| User I/O Count | 32 user I/Os |
| Speed Grade | 5 ns |
| Propagation Delay | 4.4 ns |
| Maximum Operating Frequency | 400 MHz |
| Internal Frequency | 192 MHz |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| Global Clock Pins | Up to 4 programmable global clock pins |
| Logic Family | CMOS |
| 封装 | 48-LQFP |
| 安装类型 | Surface mount |
| Programming | In-system programmable |
LC4032ZC-5T48I 48-lqfp 引脚配置指南
LC4032ZC-5T48I(48-lqfp 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LC4032ZC-5T48I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LC4032ZC-5T48I 适用于 6 应用s: Industrial Control Logic, Communication Interface Consolidation, Test and Measurement Instrumentation, Embedded System Control and Sequencing, LED and Display Control, Security and Surveillance Control.
Industrial Control Logic
The LC4032ZC-5T48I fits compact industrial control blocks that require deterministic logic and more integration than a basic combinational PLD. Its 32 macrocells and 32 user I/Os can consolidate sequencing, interlock, alarm, and interface functions, while the 5 ns speed grade supports short propagation paths in control paths. Up to four programmable global-clock pins allow clocked state machines and synchronized digital sections to use a defined clock network. The 48-LQFP package also leaves a conventional surface-mount assembly option. For industrial equipment, confirm the required ambient-temperature grade, voltage levels, isolation boundaries, and production-lifecycle plan before release.
推荐
Communication Interface Consolidation
The LC4032ZC-5T48I is useful for communication-interface glue logic where parallel data must be translated, framed, buffered, or routed between system blocks. Its 32 user I/Os provide sufficient pin bandwidth for common parallel interfaces, and the 5 ns speed grade can support short combinational paths in protocol-adaptation logic. Four global-clock resources help distribute a system clock among synchronous state machines or data-transfer controllers. Because these functions are often voltage-sensitive, engineers should assign every I/O to a compatible voltage domain using the manufacturer pin table. The CPLD should sit close to the relevant connector or processor interface to minimize routing delay and improve signal-integrity control.
推荐
Test and Measurement Instrumentation
The LC4032ZC-5T48I can consolidate timing, sequencing, and acquisition-control logic in compact measurement instruments. Its 32 macrocells offer more capacity than a basic GAL while retaining deterministic CPLD timing and a straightforward board-level programming workflow. The stated 4.4 ns propagation delay and 400 MHz maximum operating-frequency capability are useful for short acquisition-control paths, while four global-clock pins support synchronized counters and pipeline functions. In a test fixture, place the device near the acquisition circuitry and maintain short ground returns on clock and control traces. Validate input thresholds, output rise and fall behavior, and timing margins against the actual instrumentation front end rather than relying only on the speed-grade label.
推荐
Embedded System Control and Sequencing
The LC4032ZC-5T48I is appropriate for embedded control blocks that require peripheral-interface adaptation, state-machine implementation, or centralized logic around a host processor. Its 32 user I/Os can reduce discrete glue-component count, while in-system programming supports repeatable configuration during production and maintenance. The 5 ns grade provides short propagation delay for register, decode, and command-handling paths, and the available global clocks support synchronous designs. Engineers should establish a deliberate startup sequence for configuration pins and verify that all connected buses remain tri-stated until the intended interface owner is enabled. This prevents contention and makes power-up behavior deterministic across multiple embedded subsystems.
推荐
LED and Display Control
The LC4032ZC-5T48I can implement display sequencing, refresh timing, button decoding, and LED-pattern generation in equipment with a modest display requirement. Thirty-two user I/Os are sufficient for multiplexed panel control, status indicators, and local keypad scanning, while the CPLD's deterministic timing simplifies periodic refresh logic. The four global-clock resources can drive a common timebase for multiplexed outputs, reducing reliance on multiple unrelated clock sources. Layout considerations should keep display and LED outputs away from sensitive clock or configuration nets where practical. Engineers must also confirm output-drive and I/O-voltage assumptions for the selected package and use the manufacturer pin descriptions to avoid assigning a user I/O to a power-only or configuration-only position.
推荐
Security and Surveillance Control
The LC4032ZC-5T48I can implement camera-system timing, alarm decoding, event latching, and discrete sensor-interface logic in compact surveillance equipment. Its 32 macrocells and 32 user I/Os allow several low-bandwidth sensor and control functions to be consolidated, while the 5 ns timing class supports short decision paths in alarm and synchronization logic. For installations with long external wiring, treat connector and sensor paths as potential noise sources, maintain a continuous ground reference, and keep the CPLD away from high-current switching nodes. The device is nonvolatile-programmable logic rather than a dedicated cryptographic controller, so it should complement, not replace, a security-focused processor when cryptographic operations or authenticated communication are required.
推荐
推荐产品汇总
工程参考数据: LC4032ZC-5T48I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LC4032ZC-5TN48I | LC4032ZC-5T48C | LC4032C-5T48I | LC4032B-5T48I |
|---|---|---|---|---|---|
| Package | 48-LQFP | 48-LQFP | 48-LQFP | 48-LQFP | 48-LQFP |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Type | In-System Programmable SuperFAST High-Density PLD | In-System Programmable SuperFAST High-Density PLD | In-System Programmable SuperFAST High-Density PLD | LC4032 CPLD | LC4032 CPLD |
| Speed Grade | 5 ns | 5 ns | 5 ns | 5 ns | 5 ns |
| Ordering Suffix | I | N48I | C | C-5T48I | B-5T48I |
关键差异点
- Retains a 5 ns speed class across the package-matched LC4032ZC alternatives (对比 LC4032ZC-5TN48I)
- Provides 32 macrocells and 32 user I/Os for consolidated control logic (对比 GAL16V8B-25LP)
- Combines four programmable global-clock resources with a 48-pin surface-mount package (对比 ATF16V8CZ-15XC)
- Targets compact logic at 400 MHz maximum operating frequency (对比 ATF22LV10C-10SU)
设计说明
Build the footprint from the Lattice Semiconductor 48-LQFP mechanical drawing rather than a generic 48-pin library component. Check pin-1 orientation, package span, lead dimensions, and recommended solder-mask land geometry before releasing artwork. The LC4032ZC-5T48I uses a dense 48-pin surface-mount package, so assembly clearance and paste volume should be reviewed for the selected PCB process. Preserve access to all configuration pins because in-system programming depends on correct external stimulus and controlled startup behavior.
Confirm the core and I/O supply arrangement from the manufacturer pin-description and power tables before assigning signals. The device supports 1.8 V, 2.5 V, and 3.3 V operating choices, but that does not imply that every pin may use every voltage combination. Place the required decoupling capacitors close to their associated power pins, provide a low-impedance ground plane, and avoid routing high-current return paths through the logic area. Programmable I/O should remain in a defined state until the surrounding circuitry is ready.
Route global clocks as dedicated nets with short, symmetric paths and keep them away from switching nodes and noisy external inputs. Although the LC4032ZC-5T48I includes up to four programmable global-clock pins, clock-distribution quality still depends on the PCB implementation. Match clock and data trace lengths where source-synchronous timing requires it, provide continuous reference planes, and avoid unnecessary stubs. Review configuration pins for pull devices and controlled levels so an unintended configuration state cannot occur during power-up or reset.
合规信息
Compliance status for the exact ordering code requires current manufacturer declarations or product documentation. The automotive qualification field is left unknown because the device is not identified as AEC-Q100 qualified.