LC4128B-5T128C - 128-Macro-Cell CPLD | Lattice Semiconductor
料号: LC4128B-5T128C ✓ 量产中LC4128B-5T128C 概述
A complex programmable logic device, or CPLD, is a programmable-logic semiconductor that combines nonvolatile configuration storage with interconnected logic and I/O resources. Within the programmable-logic hierarchy, the LC4128B sits between individual logic gates and higher-density FPGA devices. Its deterministic architecture and in-system programmability are useful when a design requires stable timing, field reconfiguration, or logic integration without the resource demands of a large FPGA.
The LC4128B provides 128 macro cells, a maximum operating frequency of 227 MHz, and a 5 ns propagation-delay designation. The associated device family supports 3.3 V, 2.5 V, and 1.8 V operation and up to four programmable global clock pins. These features suit moderate-complexity control, interface, glue-logic, and signal-conditioning designs where deterministic routing and repeatable configuration are important.
The device belongs to the Lattice ispMACH 4000B architecture. Its programmable macro cells can be organized into logic functions implementing counters, decoders, multiplexers, state machines, and general Boolean control. Global clock resources support clock distribution across the logic array, while in-system programming permits configuration updates through dedicated programming logic without removing the device from its assembled circuit.
Typical uses include industrial control interfaces, peripheral bus arbitration, data acquisition, communication protocol conversion, and embedded system sequencing. A designer can also use it to consolidate several discrete glue-logic devices into one package. The 128-pin TQFP format offers more I/O than smaller CPLD packages, making the device suitable for designs with multiple external interfaces while remaining manageable with standard surface-mount assembly.
PCB design should preserve clean clock and programming paths. Place the device’s required decoupling capacitors close to the supply pins, route clocks away from high-current switching nodes, and follow the manufacturer’s pin-assignment and configuration guidance exactly. Before releasing a design, verify every programming signal, I/O standard, unused pin, and supply level against the manufacturer datasheet.
This page combines package, speed, macro-cell, voltage, and application information with practical design guidance and compatible same-family references. It also distinguishes directly interchangeable configurations from speed- or architecture-related parts that require additional engineering review.
直接替换替代料: LC4128B-5T128C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
LC4128B-5TN128C
✅ 直接替换📋 参考替代料(不在目录中)
LC4128V-5T128C
✅ 直接替换联系询价
查看数据手册 →LC4128B-5T128C 最大额定值与电气特性
| Device Type | In-system-programmable complex programmable logic device |
| Product Family | SuperFAST High Density PLD |
| Architecture | ispMACH 4000B |
| Macro Cells | 128 macro cells |
| Maximum Operating Frequency | 227 MHz |
| Speed Grade | 5 ns |
| Propagation Delay | 2.5 ns |
| Maximum Frequency | 380 MHz |
| Supply Voltage Options | 3.3 V, 2.5 V, or 1.8 V |
| Logic Family | CMOS |
| Global Clock Pins | Up to 4 programmable global clock pins |
| 封装 | 128-pin TQFP |
| Package Type | TQFP |
| 安装类型 | Surface Mount |
| Packaging | Tray |
| Programmability | In-system programmable |
| Configuration Memory | Nonvolatile programmable configuration |
LC4128B-5T128C tqfp 引脚配置指南
LC4128B-5T128C(tqfp 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LC4128B-5T128C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LC4128B-5T128C 适用于 6 应用s: Industrial Control Interface Logic, Peripheral Bus Arbitration, Data Acquisition Front-End, Communication Protocol Conversion, Embedded Sequencing and State Control, Programmable Glue-Logic Consolidation.
Industrial Control Interface Logic
The LC4128B-5T128C fits industrial interface consolidation where several control signals must be decoded, latched, sequenced, or arbitrated. Its 128 macro cells provide enough capacity to combine multiple Boolean functions, counters, and state machines without using several separate logic devices. The 5 ns speed designation gives the design a defined timing target for control paths, while up to four programmable global clock pins allow related sequential sections to share a controlled clock. Confirm the industrial temperature grade and I/O limits before deployment. The design should also leave a programming interface accessible for configuration updates and production test, and it should validate every external pin against the manufacturer pin-description table.
推荐
Peripheral Bus Arbitration
The LC4128B-5T128C can implement request, grant, timeout, and interrupt logic around legacy peripheral buses. Programmable macro cells allow address decoding, arbitration priorities, and protocol-state handling to be consolidated in one device, while in-system programmability makes field adjustments possible without exchanging the component. The 128-pin TQFP provides numerous external connections for bus signals and control outputs. For a successful implementation, define each I/O voltage and drive mode from the manufacturer data, keep clock distribution compact, and include boundary testing that exercises contention, reset, and programming states. The 5 ns grade should be checked against the worst routed path and external round-trip delay rather than used as an automatic timing guarantee.
推荐
Data Acquisition Front-End
The LC4128B-5T128C is appropriate for control and signal-conditioning logic around slower data-acquisition systems. Its macro cells can implement sample sequencing, channel selection, trigger logic, counters, and data-format conversion without loading a processor with simple repetitive operations. The 227 MHz operating-frequency characteristic provides a useful basis for timing analysis, while the 5 ns grade supports clocked pipeline functions when the selected I/O and routing paths meet timing requirements. Keep acquisition-clock inputs short and isolate them from switching converter nodes. Validate setup and hold behavior, output timing, metastability boundaries, and input thresholds with the exact family datasheet and the selected external component timing.
推荐
Communication Protocol Conversion
The LC4128B-5T128C can bridge protocols that require parallel-to-serial formatting, command framing, checksum generation, or stateful flow control. The 128 macro cells are suitable for combining a transmit engine, receive buffer, and interface adaptation in one programmable-logic device. In-system programming allows the protocol configuration to be updated as system requirements evolve, while the 5 ns speed grade supports moderately timed control logic. Place the device so clock and programming nets remain protected from noisy external interfaces, and use the manufacturer I/O guidance to choose terminated, plain, or other supported interface modes. Protocol verification should cover idle states, partial transfers, reset behavior, and programming-induced output states.
推荐
Embedded Sequencing and State Control
The LC4128B-5T128C works well for startup sequencing, power-state management, and multi-step peripheral control. Its programmable macro cells support counters, decoders, latches, and finite-state machines, allowing a deterministic control sequence to replace scattered discrete logic. The 5 ns propagation-delay designation is useful when sequencing must respond quickly to clocked events, and the global clock resources can distribute a common time base to parallel state logic. Establish a safe reset state for every output, define behavior during configuration, and verify transitions across cold start, warm reset, and reprogramming. A timing simulation using actual package and board assumptions is recommended before using the 227 MHz figure as a system clock target.
推荐
Programmable Glue-Logic Consolidation
The LC4128B-5T128C can replace combinations of small counters, shift registers, decoders, latches, and interface glue devices. Consolidating these functions into 128 macro cells reduces package count and simplifies board assembly while preserving programmable configuration. The 128-pin TQFP is particularly useful when the logic interacts with numerous external components, although its lead pitch requires careful fan-out and assembly planning. During schematic capture, label every pin by its exact manufacturer function, reserve programming and supply pins correctly, and identify unused pins according to the datasheet. Post-layout timing checks should include both ordinary routes and the configuration interface so that test or update modes do not introduce unintended external behavior.
推荐
推荐产品汇总
工程参考数据: LC4128B-5T128C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LC4128B-5TN128C | LC4128V-5T128C |
|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 128-pin TQFP | 128-pin TQFP | 128-pin TQFP |
| Device Type | In-system-programmable CPLD | In-system-programmable CPLD | CPLD |
| Speed Grade | 5 ns | 5 ns | 5 ns |
关键差异点
- Direct same-speed ordering option (对比 LC4128B-5TN128C)
- High-density 128-macro-cell resource level (对比 LC4128V-5T128C)
- Multi-voltage family support (对比 LC4128B-5TN128C)
设计说明
Assign all 128 pins from the manufacturer pin-description table before routing the PCB. Keep the programming interface accessible, place required decoupling capacitors close to their associated supply pins, and provide a continuous ground path where the datasheet layout guidance requires it. Because the package is a 128-pin TQFP, use careful fan-out between the fine-pitch leads and escape routes for clock and programming signals. Do not infer unused-pin treatment from another member of the LC4128 family; configuration mode and I/O behavior can vary.
Route global clocks as short, continuous paths and avoid switching-regulator nodes, high-current motor returns, and other aggressive edge sources. If a clock must cross a noisy region, use the appropriate source-series or resistor damping arrangement supported by the design rather than relying on the 5 ns speed grade to compensate for poor signal integrity. Analyze setup, hold, skew, and external round-trip timing at the actual operating frequency. The 227 MHz figure should be treated as a device timing reference, not an unconditional system operating limit.
Do not substitute LC4128B-3T128C, LC4128B-27T128C, or another family member solely because its macro-cell count and package are similar. The speed designations differ from the target’s 5 ns grade, and speed grades can have different timing, power, or availability characteristics. For a proposed replacement, verify pinout, I/O standards, supply voltages, configuration method, macro-cell architecture, timing models, and the exact programming-device definition before releasing the PCB or production order.
合规信息
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact device. AEC-Q100 qualification was not identified and is therefore not asserted.