Lattice Semiconductor

LC4128B-5T128C - 128-Macro-Cell CPLD | Lattice Semiconductor

MPN: LC4128B-5T128C ✓ Active
3.3 V, 2.5 V, or 1.8 V Vdss 128-pin TQFP Package 227 MHz Speed Nonvolatile programmable configuration Memory
MOQ: 1 |

LC4128B-5T128C Overview

The Lattice Semiconductor LC4128B-5T128C is a 128-macro-cell in-system-programmable CPLD with a 5 ns speed grade, 227 MHz operating frequency, and a 128-pin TQFP package. It operates with 3.3 V, 2.5 V, or 1.8 V supply options and belongs to the SuperFAST High Density PLD product family.

A complex programmable logic device, or CPLD, is a programmable-logic semiconductor that combines nonvolatile configuration storage with interconnected logic and I/O resources. Within the programmable-logic hierarchy, the LC4128B sits between individual logic gates and higher-density FPGA devices. Its deterministic architecture and in-system programmability are useful when a design requires stable timing, field reconfiguration, or logic integration without the resource demands of a large FPGA.

The LC4128B provides 128 macro cells, a maximum operating frequency of 227 MHz, and a 5 ns propagation-delay designation. The associated device family supports 3.3 V, 2.5 V, and 1.8 V operation and up to four programmable global clock pins. These features suit moderate-complexity control, interface, glue-logic, and signal-conditioning designs where deterministic routing and repeatable configuration are important.

The device belongs to the Lattice ispMACH 4000B architecture. Its programmable macro cells can be organized into logic functions implementing counters, decoders, multiplexers, state machines, and general Boolean control. Global clock resources support clock distribution across the logic array, while in-system programming permits configuration updates through dedicated programming logic without removing the device from its assembled circuit.

Typical uses include industrial control interfaces, peripheral bus arbitration, data acquisition, communication protocol conversion, and embedded system sequencing. A designer can also use it to consolidate several discrete glue-logic devices into one package. The 128-pin TQFP format offers more I/O than smaller CPLD packages, making the device suitable for designs with multiple external interfaces while remaining manageable with standard surface-mount assembly.

PCB design should preserve clean clock and programming paths. Place the device’s required decoupling capacitors close to the supply pins, route clocks away from high-current switching nodes, and follow the manufacturer’s pin-assignment and configuration guidance exactly. Before releasing a design, verify every programming signal, I/O standard, unused pin, and supply level against the manufacturer datasheet.

This page combines package, speed, macro-cell, voltage, and application information with practical design guidance and compatible same-family references. It also distinguishes directly interchangeable configurations from speed- or architecture-related parts that require additional engineering review.

Drop-in alternatives for LC4128B-5T128C — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

LC4128B-5TN128C

✅ Drop-In
📦 128-pin TQFP
Same 5 ns speed grade and 128-pin TQFP format; the N suffix distinguishes the ordering or temperature-grade configuration, which must be confirmed before production substitution.

📋 Reference alternative (not in catalog)

LC4128V-5T128C

✅ Drop-In
Lattice Semiconductor
📦 128-pin TQFP
Complex Programmable Logic Device · ispMACH 4000V · 128 macrocells · 227 MHz · 5 ns · 3.3 V · 1.8 V, 2.5 V, or 3.3 V · In-System Programmable

Contact for price

View Datasheet →

LC4128B-5T128C Maximum Ratings & Electrical Characteristics

Device Type In-system-programmable complex programmable logic device
Product Family SuperFAST High Density PLD
Architecture ispMACH 4000B
Macro Cells 128 macro cells
Maximum Operating Frequency 227 MHz
Speed Grade 5 ns
Propagation Delay 2.5 ns
Maximum Frequency 380 MHz
Supply Voltage Options 3.3 V, 2.5 V, or 1.8 V
Logic Family CMOS
Global Clock Pins Up to 4 programmable global clock pins
Package 128-pin TQFP
Package Type TQFP
Mounting Type Surface Mount
Packaging Tray
Programmability In-system programmable
Configuration Memory Nonvolatile programmable configuration

LC4128B-5T128C tqfp Pin Configuration Guide

Pin configuration for LC4128B-5T128C (tqfp package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

tqfp package pinout diagram for LC4128B-5T128C

No detailed pinout data available for LC4128B-5T128C.

Refer to the datasheet for full pin configuration.

Typical Applications

LC4128B-5T128C is suitable for 6 applications: Industrial Control Interface Logic, Peripheral Bus Arbitration, Data Acquisition Front-End, Communication Protocol Conversion, Embedded Sequencing and State Control, Programmable Glue-Logic Consolidation.

🏭

Industrial Control Interface Logic

The LC4128B-5T128C fits industrial interface consolidation where several control signals must be decoded, latched, sequenced, or arbitrated. Its 128 macro cells provide enough capacity to combine multiple Boolean functions, counters, and state machines without using several separate logic devices. The 5 ns speed designation gives the design a defined timing target for control paths, while up to four programmable global clock pins allow related sequential sections to share a controlled clock. Confirm the industrial temperature grade and I/O limits before deployment. The design should also leave a programming interface accessible for configuration updates and production test, and it should validate every external pin against the manufacturer pin-description table.

🔧

Peripheral Bus Arbitration

The LC4128B-5T128C can implement request, grant, timeout, and interrupt logic around legacy peripheral buses. Programmable macro cells allow address decoding, arbitration priorities, and protocol-state handling to be consolidated in one device, while in-system programmability makes field adjustments possible without exchanging the component. The 128-pin TQFP provides numerous external connections for bus signals and control outputs. For a successful implementation, define each I/O voltage and drive mode from the manufacturer data, keep clock distribution compact, and include boundary testing that exercises contention, reset, and programming states. The 5 ns grade should be checked against the worst routed path and external round-trip delay rather than used as an automatic timing guarantee.

📡

Data Acquisition Front-End

The LC4128B-5T128C is appropriate for control and signal-conditioning logic around slower data-acquisition systems. Its macro cells can implement sample sequencing, channel selection, trigger logic, counters, and data-format conversion without loading a processor with simple repetitive operations. The 227 MHz operating-frequency characteristic provides a useful basis for timing analysis, while the 5 ns grade supports clocked pipeline functions when the selected I/O and routing paths meet timing requirements. Keep acquisition-clock inputs short and isolate them from switching converter nodes. Validate setup and hold behavior, output timing, metastability boundaries, and input thresholds with the exact family datasheet and the selected external component timing.

🌐

Communication Protocol Conversion

The LC4128B-5T128C can bridge protocols that require parallel-to-serial formatting, command framing, checksum generation, or stateful flow control. The 128 macro cells are suitable for combining a transmit engine, receive buffer, and interface adaptation in one programmable-logic device. In-system programming allows the protocol configuration to be updated as system requirements evolve, while the 5 ns speed grade supports moderately timed control logic. Place the device so clock and programming nets remain protected from noisy external interfaces, and use the manufacturer I/O guidance to choose terminated, plain, or other supported interface modes. Protocol verification should cover idle states, partial transfers, reset behavior, and programming-induced output states.

🖥️

Embedded Sequencing and State Control

The LC4128B-5T128C works well for startup sequencing, power-state management, and multi-step peripheral control. Its programmable macro cells support counters, decoders, latches, and finite-state machines, allowing a deterministic control sequence to replace scattered discrete logic. The 5 ns propagation-delay designation is useful when sequencing must respond quickly to clocked events, and the global clock resources can distribute a common time base to parallel state logic. Establish a safe reset state for every output, define behavior during configuration, and verify transitions across cold start, warm reset, and reprogramming. A timing simulation using actual package and board assumptions is recommended before using the 227 MHz figure as a system clock target.

💡

Programmable Glue-Logic Consolidation

The LC4128B-5T128C can replace combinations of small counters, shift registers, decoders, latches, and interface glue devices. Consolidating these functions into 128 macro cells reduces package count and simplifies board assembly while preserving programmable configuration. The 128-pin TQFP is particularly useful when the logic interacts with numerous external components, although its lead pitch requires careful fan-out and assembly planning. During schematic capture, label every pin by its exact manufacturer function, reserve programming and supply pins correctly, and identify unused pins according to the datasheet. Post-layout timing checks should include both ordinary routes and the configuration interface so that test or update modes do not introduce unintended external behavior.

Recommended Products Summary

LC4128B-5TN128C Same-family 5 ns alternative for industrial interface designs Used in: Industrial Control Interface Logic, Peripheral Bus Arbitration, Data Acquisition Front-End, Communication Protocol Conversion, Embedded Sequencing and State Control, Programmable Glue-Logic Consolidation LC4128V-5T128C Related 5 ns, 128-pin family option Used in: Industrial Control Interface Logic, Peripheral Bus Arbitration, Data Acquisition Front-End, Communication Protocol Conversion, Embedded Sequencing and State Control, Programmable Glue-Logic Consolidation
What are the key specifications of LC4128B-5T128C that engineers should know?
The LC4128B-5T128C is a 128-macro-cell in-system-programmable CPLD with a 5 ns speed grade, a 227 MHz operating frequency, and a 128-pin TQFP package. According to the Lattice Semiconductor manufacturer datasheet, the SuperFAST High Density PLD family supports 3.3 V, 2.5 V, and 1.8 V operation, with up to four programmable global clock pins. The device is intended for deterministic logic, control, interface, and general programmable-logic designs that benefit from nonvolatile configuration and field programmability.
Where can I download the LC4128B-5T128C datasheet PDF?
The LC4128B-5T128C datasheet can be obtained from the Lattice Semiconductor documentation linked on the manufacturer’s product materials or from the datasheet landing page on this product page. The document describes the 128-macro-cell ispMACH 4000B device, its 5 ns speed designation, supported supply voltages, pin assignments, electrical characteristics, programming architecture, and package information. Always verify the ordering information and electrical limits against the revision associated with the exact LC4128B-5T128C part number.
Where can I find the LC4128B-5T128C pinout and package information?
Use the manufacturer datasheet for the authoritative LC4128B-5T128C pin assignment because this 128-pin TQFP configuration includes programming signals, power pins, grounds, clock inputs, and user I/O that must be assigned correctly. The package identification is a 128-pin TQFP, and the device is supplied in tray packaging according to its product listing. The package illustration library does not contain a matching 128-pin TQFP template, so no schematic pin diagram is reproduced on this page.
Is LC4128B-5T128C suitable for industrial control and interface logic?
Yes, LC4128B-5T128C is suitable for many industrial control, peripheral-interface, sequencing, and glue-logic designs. Its 128 macro cells provide more logic capacity than small CPLDs, while the 5 ns speed grade and 227 MHz operating frequency support timing-sensitive control paths. Confirm the exact operating-temperature grade, I/O voltage limits, and industrial qualification requirements before deployment in a temperature- or lifecycle-sensitive industrial system.
LC4128B-5T128C vs LC4128B-5TN128C: which part should I choose?
LC4128B-5TN128C is the closest listed same-family configuration because it retains the 5 ns speed designation, 128 macro cells, and 128-pin TQFP format. The meaningful distinction is the ordering suffix: LC4128B-5T128C is listed in tray packaging, whereas LC4128B-5TN128C is presented as a separate ordering code with an additional suffix letter. Check temperature grade, shipping format, and the manufacturer pin description before treating the N variant as a production substitute.
When should I choose LC4128B-5T128C over a faster LC4128B speed grade?
Choose LC4128B-5T128C when the design’s timing margin is satisfied by the 5 ns speed grade and cost or availability is more important than maximum speed. A faster LC4128B grade may improve timing margin but can alter device selection and availability. The 3 ns and 27 ns family references are speed-related options rather than equivalent drop-ins, so their speed grades differ materially from the target’s 5 ns designation and they should not be substituted without timing and thermal review.
What can replace LC4128B-5T128C without redesigning the PCB?
LC4128B-5TN128C is the most plausible same-footprint replacement because the cross-reference records identify it as a 5 ns, 128-pin member of the same LC4128B family. However, suffix and temperature-grade differences must be checked before production use. The available records do not establish five fully verified pin-to-pin alternatives, so no lower-speed, different-voltage, or different-architecture parts are presented as direct replacements.
Is LC4128B-5T128C still in stock and what is its lead time?
Current stock and lead time should be requested through the Request a Quote form on this page. A product listing reports inventory of 7,744 pieces but states that its lead time is to be confirmed and shows an estimated delivery window, so neither quantity nor timing should be treated as a guaranteed allocation. For production planning, provide the required quantity, target date, approved vendor conditions, and exact LC4128B-5T128C ordering code with the quotation request.
How much does LC4128B-5T128C cost?
Use the Request a Quote form on this page for the current LC4128B-5T128C unit price, volume tiers, stock position, and delivery schedule. Pricing for this programmable-logic device can vary with quantity, configuration, packaging, date, and supply conditions. A current quote also allows the exact MPN and commercial requirements to be matched without relying on an outdated catalog figure or an incomplete market listing.
Where can I buy LC4128B-5T128C online?
Submit an LC4128B-5T128C purchase request through the Request a Quote form on this page. Include the required quantity, package format, target delivery date, shipping destination, and whether programming or documentation support is needed. The request can then be matched to current supply for the exact 128-macro-cell, 5 ns, 128-pin TQFP ordering code without confusing it with related speed or suffix variants.
Can LC4128V-5T128C replace LC4128B-5T128C?
LC4128V-5T128C should be treated as a related same-family option rather than a confirmed drop-in replacement. It appears in cross-reference listings with the same 5 ns speed designation and 128-pin format, but the records do not provide a complete pin-to-pin and electrical-equivalence comparison. Review macro-cell architecture, I/O behavior, configuration interface, supply compatibility, and programming support in the manufacturer datasheet before approving it as a replacement.
What is the best Altera equivalent for LC4128B-5T128C?
No verified Altera equivalent is established for LC4128B-5T128C in the available cross-reference records. A CPLD with a similarly named part number is not automatically interchangeable because macro-cell organization, I/O standards, programming architecture, pin assignments, and configuration methods can differ. For a cross-brand migration, compare the complete pinout, supported supply voltages, timing model, user I/O count, embedded-memory needs, and available programming tools before considering a board-level redesign.
Is LC4128B-5T128C suitable for clocked control and state-machine logic?
LC4128B-5T128C is suitable for clocked control, counter, decoder, and state-machine implementations because it provides 128 macro cells and up to four programmable global clock pins. The 5 ns speed designation can support moderate clock-domain logic, while the 227 MHz operating-frequency figure indicates the range commonly associated with this device for timing analysis. Actual system frequency must be constrained by the actual routed path and the timing conditions specified in the manufacturer datasheet.
What programming tools and configuration method apply to LC4128B-5T128C?
LC4128B-5T128C is configured through the in-system programming architecture of the Lattice ispMACH 4000B family. The design should use the programming software, device family definition, and programming cable or interface supported by Lattice Semiconductor for this exact device. Preserve the recommended JTAG or programming-chain connections and verify the configuration behavior, instruction sequence, and system-level I/O behavior during prototype validation.
Does LC4128B-5T128C support RoHS, REACH, or AEC-Q100 qualification?
The manufacturer data identified for LC4128B-5T128C does not explicitly confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status, so each field is recorded as unknown or not applicable rather than assumed. Obtain the current manufacturer compliance or material declaration for the exact ordering code before using the device in regulated or automotive programs. AEC-Q100 qualification is especially important because it cannot be inferred from the commercial or industrial part designation alone.

Engineering reference data for LC4128B-5T128C — comparison, design guidance, and compliance information.

Selection Guide

Choose LC4128B-5T128C when the design needs 128 macro cells, a 5 ns speed designation, in-system programmability, and a 128-pin TQFP footprint. Its 227 MHz operating-frequency figure makes it appropriate for moderate-speed control and interface logic rather than high-end FPGA workloads. Consider LC4128B-5TN128C when the same package and speed grade are required but a different ordering suffix or temperature configuration is preferable; confirm the suffix-specific conditions before substitution. Consider LC4128V-5T128C only after checking its pinout, configuration architecture, I/O behavior, and device-family software support. Do not use a different LC4128B speed grade as an automatic drop-in because changes in the numeric speed designation can affect timing, power, qualification, and supply. For any cross-brand replacement, treat the selection as a redesign unless a verified manufacturer cross-reference establishes full pin, voltage, timing, and programming compatibility.

Comparison with Alternatives

Parameter This Product LC4128B-5TN128C LC4128V-5T128C
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 128-pin TQFP 128-pin TQFP 128-pin TQFP
Device Type In-system-programmable CPLD In-system-programmable CPLD CPLD
Speed Grade 5 ns 5 ns 5 ns

Key Differentiators

  • Direct same-speed ordering option (vs LC4128B-5TN128C)
  • High-density 128-macro-cell resource level (vs LC4128V-5T128C)
  • Multi-voltage family support (vs LC4128B-5TN128C)

Design Notes

Assign all 128 pins from the manufacturer pin-description table before routing the PCB. Keep the programming interface accessible, place required decoupling capacitors close to their associated supply pins, and provide a continuous ground path where the datasheet layout guidance requires it. Because the package is a 128-pin TQFP, use careful fan-out between the fine-pitch leads and escape routes for clock and programming signals. Do not infer unused-pin treatment from another member of the LC4128 family; configuration mode and I/O behavior can vary.

Route global clocks as short, continuous paths and avoid switching-regulator nodes, high-current motor returns, and other aggressive edge sources. If a clock must cross a noisy region, use the appropriate source-series or resistor damping arrangement supported by the design rather than relying on the 5 ns speed grade to compensate for poor signal integrity. Analyze setup, hold, skew, and external round-trip timing at the actual operating frequency. The 227 MHz figure should be treated as a device timing reference, not an unconditional system operating limit.

Do not substitute LC4128B-3T128C, LC4128B-27T128C, or another family member solely because its macro-cell count and package are similar. The speed designations differ from the target’s 5 ns grade, and speed grades can have different timing, power, or availability characteristics. For a proposed replacement, verify pinout, I/O standards, supply voltages, configuration method, macro-cell architecture, timing models, and the exact programming-device definition before releasing the PCB or production order.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact device. AEC-Q100 qualification was not identified and is therefore not asserted.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

LC4128B-5T128C datasheet LC4128B-5T128C specifications LC4128B-5T128C pinout LC4128B-5T128C schematic LC4128B-5T128C equivalent LC4128B-5T128C replacement LC4128B-5T128C cross reference LC4128B-5T128C vs LC4128B-5TN128C LC4128B-5T128C footprint LC4128B-5T128C application circuit Lattice LC4128B-5T128C LC4128B-5T128C price LC4128B-5T128C stock 128 pin TQFP CPLD ispMACH 4000B CPLD

Related Components & Terms

Lattice Semiconductor LC4128B-5T128C LC4128B-5TN128C LC4128V-5T128C CPLD complex programmable logic device FPGA programmable logic device ispMACH 4000B SuperFAST High Density PLD macro cell in-system programming nonvolatile configuration 128-pin TQFP TQFP surface mount SMD CMOS global clock propagation delay operating frequency supply voltage industrial control data acquisition protocol conversion
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details