LC4256B-3T100C - 256-Macrocell 3 ns CPLD | Lattice Semiconductor
料号: LC4256B-3T100C ✗ 停产LC4256B-3T100C 概述
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines a structured logic array with non-volatile configuration memory. In the broader semiconductor hierarchy, a CPLD sits between basic programmable logic devices and more complex FPGAs: it provides deterministic timing, relatively fast configuration, and a compact package for fixed control functions that require frequent design revisions. The LC4256B series implements this role with 256 macrocells and 16 logic array blocks.
The principal device characteristics include 256 macrocells, 16 logic array blocks, a 3 ns maximum propagation delay, and compatibility with 3.3 V, 2.5 V, and 1.8 V supply levels. In-system programmability allows a board designer to update the implemented logic without removing the device from the assembled PCB. This is particularly useful during prototype bring-up, production configuration, or field maintenance when the control logic must be revised after initial hardware fabrication.
The device integrates configurable combinational and sequential logic with non-volatile configuration storage. Fourteen dedicated I/O pins are identified for the 100-pin package, while the remaining package positions serve power, ground, and configuration functions. Because the exact pin assignments, I/O standards, and electrical limits are defined in the device pin table, PCB assignment should follow that table rather than relying on generic TQFP conventions. The exposed thermal considerations are also package-specific because temperature grade, power consumption, and switching activity determine the required copper area.
Typical uses include industrial control and data-acquisition interfaces, communication protocol bridges, programmable I/O expansion, embedded system glue logic, and compact control modules. For a board migrating from a discrete gate-array implementation, the LC4256B-3T100C can replace groups of counters, state machines, address decoders, and interface controllers while preserving the in-system update advantage of a non-volatile CPLD architecture.
Design planning should begin with the 3 ns speed grade and confirm that every external interface satisfies its setup and hold requirements at the intended operating voltage. Designers should also validate I/O standards, configuration timing, power sequencing, and termination against the manufacturer datasheet. The 100-pin TQFP footprint requires careful fan-out from fine-pitch pads, particularly where high-speed signals leave the device.
This product page combines the verified device identity, package, architecture, operating-voltage, and lifecycle information with a structured alternative comparison and practical design guidance. It also distinguishes exact package-compatible choices from candidates that require a footprint change, helping engineers narrow replacements before committing to a PCB respin.
直接替换替代料: LC4256B-3T100C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LC4256B-3T100C (相同外形与封装尺寸) ——差异在于 Device Type, Programming Method.
LC4256V-3T100C
✅ 直接替换联系询价
查看数据手册 →LC4256B-75T100C
✅ 直接替换📋 参考替代料(不在目录中)
LC4256B-5T100C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LC4256B-3T100I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LC4256C-3T100C
✅ 直接替换联系询价
查看数据手册 →LC4256B-3T100C 最大额定值与电气特性
| Device Type | Complex programmable logic device |
| Programmable Logic Type | In-system programmable SuperFAST high-density PLD |
| Macrocells | 256 macrocells |
| Logic Array Blocks | 16 logic array blocks |
| Maximum Propagation Delay | 3 ns |
| Supply Voltage Options | 3.3 V, 2.5 V, or 1.8 V |
| 封装 | 100-pin TQFP |
| 安装类型 | Surface mount |
| Configuration Memory | Non-volatile configuration storage |
| Programming Method | In-system programmable |
| Dedicated I/O Pins | 14 I/O pins |
LC4256B-3T100C 100-pin tqfp 引脚配置指南
LC4256B-3T100C(100-pin tqfp 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LC4256B-3T100C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LC4256B-3T100C 适用于 6 应用s: Industrial Control Logic, Data-Acquisition Interface Consolidation, Communication Protocol Bridging, Programmable I/O Expansion, Embedded System Glue Logic, Compact Communication and Control Modules.
Industrial Control Logic
The LC4256B-3T100C fits centralized industrial control logic because its 256 macrocells and 16 logic array blocks can combine state machines, counters, interlocks, decoders, and actuator-control functions in one programmable device. The 3 ns speed class supports short combinational control paths, while 3.3 V, 2.5 V, and 1.8 V operation allows integration with multiple industrial logic levels. In-system programmability is valuable during commissioning because logic revisions can be loaded without board-level component replacement. The principal qualification requirement is confirming that the exact temperature grade, I/O standards, and timing limits satisfy the machine’s operating environment.
推荐
Data-Acquisition Interface Consolidation
The LC4256B-3T100C can consolidate address decoding, sample sequencing, trigger routing, status flags, and buffer-control functions around a data-acquisition circuit. Its 256 macrocells provide enough architecture for multiple channels of deterministic digital coordination, while the 3 ns speed designation supports high-rate control signals when timing paths are properly constrained. The same 100-pin TQFP footprint also simplifies transition from a discrete counter, latch, and decoder implementation. Engineers should use the manufacturer timing and pin tables to define bank-level I/O voltage, implementation constraints, and acquisition-trigger timing before release.
推荐
Communication Protocol Bridging
The LC4256B-3T100C is suitable for fixed-format protocol bridging where framing, byte alignment, parity, handshakes, and buffer control must be implemented deterministically. Its 16 logic array blocks and 256 macrocells can support parallel-to-serial conversion, state sequencing, and interface arbitration without a separate microcontroller for every interface. A 3 ns speed grade can accommodate short datapath stages, although external serial-line timing and skew must be analyzed independently. In-system programmability allows protocol fixes to be deployed on the assembled board, reducing the need for a hardware respin during validation.
推荐
Programmable I/O Expansion
The LC4256B-3T100C can expand a host board with programmable interrupt, chip-select, pulse-width, level-shift, and general-purpose digital I/O functions. The device’s macrocell structure is well suited to distributing a small number of control signals across a larger system while maintaining deterministic behavior. Its 14 identified dedicated I/O pins and in-system configuration support make it useful for prototype platforms that require routing changes late in development. Designers must confirm voltage tolerance and I/O-standard support for every connected bank because package compatibility does not imply identical electrical compatibility with every alternative ordering code.
推荐
Embedded System Glue Logic
The LC4256B-3T100C is effective as glue logic between processors, memories, sensors, and peripheral devices. It can implement boot sequencing, reset coordination, arbitration, watchdog timing, bus-cycle decoding, and peripheral select logic while the main processor handles software-intensive tasks. The 256-macrocell architecture reduces component count compared with a collection of fixed-function decoders and counters, and the 3 ns class can support short control paths. System partitioning should account for configuration data, I/O voltage domains, and the device’s documented timing so the CPLD does not become a hidden bottleneck in the processor interface.
推荐
Compact Communication and Control Modules
The LC4256B-3T100C can serve as the central programmable logic element in a compact module that combines interface conversion, command decoding, and supervisory control. Its 100-pin TQFP package provides enough connections for multiple external buses and control signals while avoiding a larger ball-grid array. In-system programmability is particularly useful in modular systems because each board can receive a configuration matched to its connector, firmware, and test fixture. Before adopting the obsolete device for new modules, compare current family members, verify programming-tool support, and confirm supply availability for the production horizon.
推荐
推荐产品汇总
工程参考数据: LC4256B-3T100C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LC4256V-3T100C | LC4256B-75T100C | LC4256B-5T100C | LC4256B-3T100I | LC4256C-3T100C |
|---|---|---|---|---|---|---|
| Package | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Family | LC4256B ispMACH 4000B | LC4256V ispMACH 4000V | LC4256B ispMACH 4000B | LC4256B ispMACH 4000B | LC4256B ispMACH 4000B | LC4256C ispMACH 4000C |
| Speed Designation | 3 ns | 3 ns | 75 ns | 5 ns | 3 ns | 3 ns |
关键差异点
- Exact 3 ns speed designation within a 256-macrocell architecture (对比 LC4256B-5T100C)
- Established B-family implementation for legacy revisions (对比 LC4256C-3T100C)
- Pin-compatible family alternative with the same speed designation (对比 LC4256V-3T100C)
- Higher timing speed than the 75-speed package-compatible option (对比 LC4256B-75T100C)
设计说明
Assign the board using the manufacturer pin-description table rather than a generic TQFP symbol. Confirm every power and ground connection, configuration pin, clock input, and I/O assignment against the exact device revision. Place decoupling capacitors at the associated supply pins with short return paths, and preserve the package-specific exposed-pad or thermal-via pattern. Mixed 3.3 V, 2.5 V, and 1.8 V operation must be planned by supply bank so every connected interface has a valid input level and output specification.
Treat the 3 ns value as a speed-grade designation rather than a guaranteed end-to-end delay for every path. Constrain external interfaces according to the device timing tables and include setup, hold, skew, and routing delay in system timing analysis. Keep high-speed clock and control nets short, provide continuous reference-plane returns, and match external interface timing to the selected 3.3 V, 2.5 V, or 1.8 V operating condition.
Do not assume that the LC4256B, LC4256C, LC4256V, or slower speed-grade variants are electrically interchangeable. The shared 100-pin TQFP footprint establishes physical compatibility only. Compare I/O standards, supply behavior, timing tables, configuration requirements, macrocell architecture, and device revision before substitution. For an existing design, also preserve the archived configuration file and verify that the programming toolchain still recognizes the selected replacement.
合规信息
The LC4256B-3T100C is listed as discontinued. Exact environmental, automotive, and material-compliance claims require confirmation from the manufacturer documentation for the ordered device.