LC4256V-5T100C - 256-Macro-Cell 227MHz CPLD | Lattice
料号: LC4256V-5T100C ✗ 停产LC4256V-5T100C 概述
A CPLD is a programmable-logic device within the broader semiconductor and FPGA & CPLD hierarchy. Unlike a mask-programmed logic device, it stores its configuration in nonvolatile memory and can be programmed or reprogrammed in the circuit. The LC4256V combines relatively fast logic performance with a deterministic, nonvolatile architecture suited to control logic, interface adaptation, bus decoding, and compact glue-logic designs.
The ispMACH 4000V architecture provides 256 macro cells organized into 16 logic blocks, with up to 64 user I/O for external connections. The -5 speed designation corresponds to a maximum propagation delay of 5.0 ns, while the listed 227 MHz system-frequency figure supports designs operating in the hundreds of megahertz. The device supports 3.3 V operation and is offered in a surface-mount TQFP-100 package.
In-system programmability allows configuration data to be loaded after board assembly, which simplifies prototype revision, production configuration, and field-update planning. Designers still need to account for the supply rails, clocking, JTAG programming path, signal conditioning, and output-drive requirements associated with the exact board environment.
Typical implementations include industrial control and data-acquisition modules, communications-interface adapters, peripheral expansion for microcontrollers, test and measurement logic, embedded system boot and configuration controllers, and compact bus-arbitration or protocol-bridging circuits. Its 64 I/O provide useful connectivity without moving to a much larger programmable-logic package.
PCB implementation should preserve short, controlled clock routes and provide clean return paths beneath the device. Decoupling should follow the power-supply recommendations in the manufacturer datasheet, while JTAG and programming signals should remain accessible for production programming and field upgrades.
This page combines package, timing, capacity, programming, and sourcing details with same-family drop-in alternatives, comparison data, and practical implementation guidance. It is designed to accelerate component selection, footprint verification, BOM review, and design-in activity for the LC4256V-5T100C.
直接替换替代料: LC4256V-5T100C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
LC4256V-5TN100I
✅ 直接替换📋 参考替代料(不在目录中)
LC4256V-75TN100C
✅ 直接替换📋 参考替代料(不在目录中)
LC4256B-5T100C
✅ 直接替换联系询价
查看数据手册 →LC4256B-5T100I
✅ 直接替换联系询价
查看数据手册 →LC4256C-5T100C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LC4256V-5T100C 最大额定值与电气特性
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000V |
| Macro Cells | 256 macro cells |
| Logic Blocks | 16 logic blocks |
| User I/O | 64 user I/O |
| Maximum System Frequency | 227 MHz |
| Maximum Propagation Delay | 5.0 ns |
| Nominal Supply Voltage | 3.3 V |
| Internal Supply Voltage Range | 3.0 V to 3.6 V |
| Supported Supply Voltage Modes | 3.3 V, 2.5 V, and 1.8 V |
| Programming Type | In-System Programmable |
| 封装 | 100-pin TQFP |
| 安装类型 | SMD surface mount |
| 工作温度范围 | 0°C to 90°C junction temperature |
| Packaging | Tray |
LC4256V-5T100C 100-pin tqfp 引脚配置指南
LC4256V-5T100C(100-pin tqfp 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LC4256V-5T100C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LC4256V-5T100C 适用于 6 应用s: Industrial Control and Data Acquisition, Communications Interface Adaptation, Peripheral Expansion for Microcontrollers, Test and Measurement Logic, Embedded System Configuration and Boot Control, General-Purpose Glue Logic.
Industrial Control and Data Acquisition
The LC4256V-5T100C fits industrial control modules that require deterministic combinational and sequential logic close to sensors, actuators, or converters. Its 256 macro cells and 16 logic blocks provide implementation capacity for control, timing, interlocks, and status decoding, while 64 user I/O permit direct connections without an external bus bridge. The 5.0 ns maximum propagation delay and 227 MHz maximum system frequency support fast status and handshake logic. The 0°C to 90°C junction-temperature range must be respected, and a 3.3 V rail with clean decoupling should be used. JTAG access should remain available for production programming, diagnostics, and firmware updates.
推荐
Communications Interface Adaptation
The LC4256V-5T100C is useful for adapting dissimilar communications interfaces in embedded equipment. Its 64 user I/O can support parallel data buses, control signals, interrupts, and protocol state machines, while the 5.0 ns maximum propagation delay enables predictable combinational decoding and clock-domain interface elements. The 227 MHz system-frequency capability is appropriate for moderately fast control paths, although external PHY devices may handle higher-speed serial signaling. Use the family’s supported 3.3 V, 2.5 V, or 1.8 V operating modes only where the complete design and I/O constraints permit them. Preserve a short, impedance-controlled interface layout and provide accessible JTAG programming connections.
推荐
Peripheral Expansion for Microcontrollers
The LC4256V-5T100C can expand a microcontroller’s peripheral set when fixed logic would otherwise require multiple discrete devices. Its 256 macro cells are suitable for timers, address decoders, bus arbiters, display-control sequencing, and compact state machines, with 64 I/O available for connections to external circuitry. The 227 MHz maximum system frequency and 5.0 ns maximum propagation delay allow the CPLD to assist with high-speed handshakes while the microcontroller handles higher-level software. Because the configuration is in-system programmable, interface changes can be implemented by revising the bitstream rather than rerouting the board. Check pin assignments, supply levels, and timing margins against the final schematic.
推荐
Test and Measurement Logic
The LC4256V-5T100C can implement control sequencing, pattern generation, acquisition triggers, and instrument-interface logic in compact test and measurement equipment. The 256 macro cells provide meaningful parallelism, and the 64 user I/O allow the CPLD to coordinate multiple instrument-control signals without making it the principal processor. A 5.0 ns maximum propagation delay supports precise digital timing functions, while the 227 MHz figure serves fast internal control logic rather than high-speed analog sampling. The nonvolatile in-system-programmable configuration simplifies repeatable fixture setup. Ensure trigger and clock routes are compact, provide stable supply filtering, and follow the manufacturer’s input, output, and power recommendations.
推荐
Embedded System Configuration and Boot Control
The LC4256V-5T100C can manage power sequencing, reset distribution, peripheral enables, and boot-mode decoding around an embedded processor. Its 256 macro cells and 16 logic blocks accommodate reliable state-machine and interlock implementations, while 64 user I/O support multiple rails and peripheral-control signals. The in-system-programmable architecture allows revision of the sequencing policy without changing the PCB, provided the JTAG path remains accessible. The 5.0 ns maximum propagation delay supports deterministic control, but critical reset paths should still be checked for contention and timing across every powered state. Use the 3.3 V nominal supply configuration unless the complete design supports another specified voltage mode.
推荐
General-Purpose Glue Logic
The LC4256V-5T100C is well suited to general-purpose glue logic where combinational decoding, counters, state machines, latches, and interface glue would otherwise become unwieldy. The 256 macro cells offer more capacity than a small generic logic device, while the 100-pin TQFP provides 64 user I/O and adequate power connections for a compact system. Its 5.0 ns maximum propagation delay and 227 MHz maximum system frequency support responsive control paths. During schematic capture, assign only documented user, clock, configuration, power, and ground pins. Keep programming signals accessible, minimize loop area around high-speed nets, and validate every timing-critical path with the vendor’s timing-analysis flow.
推荐
推荐产品汇总
工程参考数据: LC4256V-5T100C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LC4256V-5TN100I | LC4256V-75TN100C | LC4256B-5T100C | LC4256B-5T100I | LC4256C-5T100C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 |
| Product Family | ispMACH 4000V | ispMACH 4000V | ispMACH 4000V | ispMACH 4000B | ispMACH 4000B | ispMACH 4000C |
| Maximum Propagation Delay | 5.0 ns | 5.0 ns | Nominal 7.5 ns speed class | 5.0 ns speed designation | 5.0 ns speed designation | 5.0 ns speed designation |
| Temperature Grade | Commercial | Industrial | Commercial | Commercial | Industrial | Commercial |
| Programming | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable |
关键差异点
- Higher timing performance than the -75 speed option (对比 LC4256V-75TN100C)
- Industrial-temperature same-footprint option (对比 LC4256V-5TN100I)
- Same speed class across the ispMACH 4000V and 4000B families (对比 LC4256B-5T100C)
设计说明
Use the 3.3 V nominal configuration unless the complete design supports one of the family’s specified lower-voltage modes. Place local bypass capacitors at the supply and ground pins using the package-specific layout in the manufacturer datasheet. Keep the switching-current return path compact so the 5 ns logic performance is not undermined by supply ripple or inductive voltage drops.
Preserve access to all JTAG programming signals and include the recommended programming interface in the board layout. A production board that cannot be programmed after assembly creates an avoidable rework risk. Verify every TQFP-100 pad against the package drawing and pin-description table before releasing the PCB artwork.
Route clocks and high-speed control signals as short and continuous as practical, with uninterrupted reference planes and minimal stubs. The LC4256V-5T100C can operate at 227 MHz, but external routing and loading determine whether timing margins remain usable. Use the vendor timing tools with realistic board conditions and include clock uncertainty in the final analysis.
Do not treat the C, I, N, V, and speed suffixes as cosmetic. They distinguish family architecture, temperature grade, package construction, or timing class. When changing MPNs, verify pin assignment, voltage, temperature, maximum delay, system frequency, programming support, and supply pinout even when all candidates use a 100-pin TQFP outline.
合规信息
The device is a programmable-logic IC rather than an automotive-qualified component. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly established for the exact MPN.