LFE2-35E-6F672C - 32K LUT ECP2 FPGA | Lattice Semiconductor
料号： LFE2-35E-6F672C ✓ 量产中LFE2-35E-6F672C 概述
An FPGA is a semiconductor whose internal logic, interconnects, and I/O behavior are configured after fabrication. The LFE2-35E-6F672C belongs to the ECP2 family of low-power FPGAs, combining configurable logic blocks, embedded resources, programmable I/O, and high-speed serial capabilities in one package. This makes it suitable for systems that need flexible hardware behavior, rapid product customization, or parallel implementation of control and interface logic.
The ECP2 architecture provides approximately 32K LUTs and a maximum system frequency of 357 MHz for the cited configuration. Its 672-ball package exposes as many as 450 user I/O, allowing dense connections to external memory, processors, network PHYs, and custom peripherals. The 1.2 V core supply and -6 speed designation place the part in the performance class intended for general-purpose programmable logic rather than extreme-performance applications.
This LFE2 device uses 90 nm process technology and integrates programmable logic with system-level connectivity. The 27 x 27 mm FBGA has a 672-ball pin count, providing a high pin-density interface suitable for multilayer boards. Its lead-free construction is identified in product records, while detailed power, junction-temperature, configuration-memory, and differential-I/O characteristics should be confirmed against the manufacturer documentation for the exact ordering code.
Typical uses include network interface equipment, industrial control modules, data-acquisition systems, embedded processors, storage controllers, and video or image-processing pipelines. The large logic capacity is especially useful when a design combines bus arbitration, protocol conversion, data formatting, and control logic instead of routing each function through a discrete programmable-logic device or multiple lower-density FPGAs.
PCB design should account for the fine-pitch BGA footprint, high-speed clock routing, power-plane integrity, decoupling, and thermal spreading. Confirm device programming requirements, supported I/O standards, voltage tolerances, and bank configuration directly from the Lattice ECP2 documentation before release. This page adds application guidance, drop-in alternatives, comparison parameters, and design notes to the core manufacturer specifications.
直接替换替代料： LFE2-35E-6F672C ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： LFE2-35E-6F672C （相同外形与封装尺寸）.
LFE2-35E-6F672I
✅ 直接替换联系询价
查看数据手册 →LFE2-35E-6FN672C
✅ 直接替换📋 参考替代料（不在目录中）
LFE2-35E-7FN672I
✅ 直接替换📋 参考替代料（不在目录中）
LFE2-20SE-7F672C
✅ 直接替换📋 参考替代料（不在目录中）
LFE2-35E-6F672C 最大额定值与电气特性
| Device Type | ECP2 Field Programmable Gate Array (FPGA) |
| Logic Capacity | 32K LUTs |
| System Frequency | 357 MHz |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -6 |
| Maximum User I/O | 450 I/O |
| Cell Count | 35,000 cells |
| Process Technology | 90 nm |
| Package Type | 672-ball FBGA |
| Package Code | FBGA-672 |
| Package Dimensions | 27 x 27 mm |
| Terminal Count | 672 terminals |
| Terminal Form | Ball |
| Package Shape | Square |
| 安装类型 | Surface mount |
| Shipping Format | Tray |
| Lead-Free Construction | Lead free |
LFE2-35E-6F672C square 引脚配置指南
LFE2-35E-6F672C（square 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： LFE2-35E-6F672C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LFE2-35E-6F672C 适用于 6 应用s: Industrial Control Logic, Data-Acquisition and Signal Conditioning, Network Interface Equipment, Video and Image Processing, Storage and Interface Aggregation, Programmable Embedded Control.
Industrial Control Logic
The LFE2-35E-6F672C fits industrial controllers that combine sequencing, machine-state monitoring, interlocks, and data acquisition in one programmable device. Its 32K LUT capacity provides substantial logic space, while as many as 450 I/O can connect sensors, actuators, counters, and communication transceivers. The 357 MHz system-frequency figure accommodates timing-sensitive control and datapath functions without requiring a separate processor for every protocol task. Use the manufacturer pinout for the 672-ball FBGA and choose the ordering suffix that covers the installation's ambient-temperature range. Distributed control is especially practical when the design needs deterministic field updates while maintaining a single board-level programmable architecture.
Data-Acquisition and Signal Conditioning
The LFE2-35E-6F672C is appropriate for data-acquisition front ends that must coordinate converters, switches, memory, and digital filtering. The 32K LUTs can implement parallel conditioning and buffer-control logic, and the 450-I/O ceiling supports multiple converters, clocks, triggers, and status signals. The 357 MHz device-class frequency is useful for pipeline and parallel-data functions, although actual throughput depends on the selected memory interface and external data-rate limits. Place acquisition and control paths in separate clock domains when appropriate, constrain all timing paths, and validate converter and switch timing against the exact Lattice timing constraints.
Network Interface Equipment
The LFE2-35E-6F672C suits protocol converters, packet processors, and network-interface modules where multiple data paths must terminate in a single FPGA. Its 32K LUT capacity can support framing, header processing, buffering, and control logic, while up to 450 I/O provide connectivity for transceivers and external processors. The 1.2 V core supply and 672-ball FBGA demand careful plane allocation, but the high pin count provides substantial board-level connectivity. Match every high-speed I/O to the manufacturer's supported standards and impedance constraints, and check timing at the target line rate rather than relying solely on the 357 MHz system-frequency figure.
Video and Image Processing
The LFE2-35E-6F672C can implement parallel pixel pipelines, color conversion, synchronization, and control logic in compact imaging modules. Its 35,000-cell, 32K-LUT ECP2 configuration provides enough parallel resources for moderate-resolution data movement and auxiliary processing, while the 672-ball package exposes numerous connections to image sensors, frame memory, and display controllers. The design must still meet external memory bandwidth and video-timing limits, which can dominate performance. Use synchronous clocking, constrained I/O timing, and source-synchronous routing techniques appropriate to the selected Lattice devices and board stack-up.
Storage and Interface Aggregation
The LFE2-35E-6F672C is useful for storage controllers, bus bridges, and adapters that combine legacy and modern interfaces. The 32K LUT capacity can host arbitration, command translation, status tracking, and test logic, while the large 450-I/O limit simplifies connections among controllers, memories, and connectors. The 1.2 V core device should be supported by a low-impedance power plane and local decoupling to prevent logic and I/O activity from disturbing sensitive timing paths. Confirm supported memory-interface combinations, I/O voltage tolerances, and clock-domain relationships in the manufacturer documentation before finalizing the system architecture.
Programmable Embedded Control
The LFE2-35E-6F672C can serve as the programmable control core in an embedded subsystem that handles boot sequencing, watchdog behavior, peripheral arbitration, and bus decoding. Its 32K LUTs allow dedicated logic to operate alongside a processor rather than burdening that processor with every time-critical task. Up to 450 I/O provide connectivity to processors, memories, and specialized peripherals, while the 357 MHz system-frequency reference supports moderate-speed real-time control. Partition the design into clearly timed clock domains, define startup behavior for every I/O, and confirm configuration loading, boot timing, and peripheral ownership with the Lattice implementation flow.
工程参考数据： LFE2-35E-6F672C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LFE2-35E-6F672I | LFE2-35E-6FN672C | LFE2-35E-7FN672I | LFE2-20SE-7F672C |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 672-ball FBGA, 27 x 27 mm | 672-ball FBGA | 672-ball FBGA | 672-ball FBGA | 672-ball FBGA |
| Speed Grade | -6 | -6 | -6 | -7 | -7 |
关键差异点
- Higher logic and timing specification within the compared ECP2 choices （对比 LFE2-20SE-7F672C)
- Closest same-family ordering alternative with matching core resource class （对比 LFE2-35E-6FN672C)
- Direct commercial-versus-industrial grade choice （对比 LFE2-35E-6F672I)
- One-grade performance distinction within the same 35K ECP2 package family （对比 LFE2-35E-7FN672I)
设计说明
Treat the 672-ball FBGA as a high-density routing and power-delivery problem. Follow the Lattice Semiconductor package drawing and recommended land pattern for ball diameters, solder-mask clearance, and pad-stack definitions. Assign continuous ground and power planes, place local decoupling close to supply balls, and provide adequate escape-routing channels from the inner-ball array. Confirm layer count and via geometry with the board fabricator because a mechanically valid footprint can still produce opens or shorts when escape routes are constrained.
Separate high-speed clocks, memory interfaces, and sensitive inputs from noisy I/O regions, and use the manufacturer's supported I/O standards to define impedance and termination. The 357 MHz system-frequency figure does not define every external interface rate, so each clock domain needs its own timing constraint. Use length matching where required by the selected interface, preserve continuous reference planes beneath high-speed routes, and validate differential pairs against the pin-description table rather than inferring polarity or pin function from package position.
Design the 1.2 V core rail and every external I/O supply as a complete power-distribution network. Verify the exact voltage, tolerance, sequencing, and current limits against the manufacturer documentation for LFE2-35E-6F672C. Place bulk and high-frequency decoupling according to the reference design, keep switching supplies and inductors away from sensitive pins, and test voltage droop at the device under worst-case I/O activity. Ground-reference return paths should remain short because a low-noise rail cannot correct a shared-impedance disturbance created in the PCB.
Do not treat similar ECP2 suffixes as automatically interchangeable. Check the full ordering code for logic density, speed grade, temperature class, package, and any suffix-specific electrical or qualification differences. In particular, LFE2-35E-6FN672C and LFE2-35E-7FN672I require confirmation against the manufacturer part table even though their 672-ball packages align. Also avoid estimating unused BGA-ball functions from generic package drawings; use the exact pin-description table and verify every power, ground, configuration, and I/O connection.
合规信息
The device is identified as lead free. RoHS, REACH, halogen-free, conflict-minerals, and automotive-qualification statements require current manufacturer documentation for the exact ordering code.