Lattice Semiconductor

LFE2-6SE-5F256C - 6K LUT ECP2 FPGA | Lattice Semiconductor

料号: LFE2-6SE-5F256C ✓ 量产中
1.14 V to 1.26 V Vdss 256-FPBGA, 17 mm x 17 mm Package 311 MHz Speed
最小起订量: 1 |

LFE2-6SE-5F256C 概述

The Lattice Semiconductor LFE2-6SE-5F256C is an ECP2 series field-programmable gate array with 6,000 logic cells, 190 user I/O, and 56,320 bits of embedded block RAM. It operates from a 1.14 V to 1.26 V core supply and is packaged in a 256-ball FPBGA measuring 17 mm by 17 mm. The device is intended for compact embedded systems requiring programmable logic, parallel digital interfaces, and dedicated RAM resources.

An FPGA is a semiconductor whose internal digital circuits are configured after manufacture. The LFE2-6SE-5F256C belongs to the ECP2 low-power FPGA family and combines configurable logic, block RAM, programmable I/O, and embedded DSP functions. This makes it a practical platform for consolidating control logic, communication interfaces, and small signal-processing functions into one device instead of using several discrete components.

The principal resource figures are 6,000 logic cells, 190 user I/O, and 56,320 bits of block RAM. Its 1.2 V operating class supports low-voltage digital systems, while the 256-FPBGA package provides a high pin count for parallel buses and multi-channel interfaces. The -5 ordering code identifies the device speed grade, and the C suffix identifies the commercial temperature grade. The exact maximum operating frequency and temperature limits must be confirmed against the manufacturer datasheet before a production design is released.

Within the ECP2 architecture, configurable logic blocks implement Boolean, arithmetic, control, and state-machine functions. Embedded block RAM provides dedicated storage for packet buffers, sampled data, lookup tables, and display or communications data. Programmable I/O blocks support external interfaces, while DSP resources can accelerate multiply-accumulate operations used by filters, waveform generation, and digital signal processing. These functions allow one FPGA to replace combinations of programmable logic and fixed-function digital ICs.

Typical uses include industrial equipment controllers, motor and sequencing logic, data-acquisition front ends, communication gateways, embedded control systems, and compact consumer products. The 190 I/O count is particularly useful when a design must connect multiple sensors, actuators, memory devices, and parallel buses. The 56,320-bit RAM inventory is also suitable for buffering short frames, retaining sampled values, or implementing fixed-size lookup tables without external memory.

Power and layout planning remain central to a successful BGA implementation. Confirm every supply rail, decoupling requirement, configuration interface, and pin assignment in the manufacturer datasheet. Preserve the specified ball assignments and follow the recommended land pattern, fanout, and manufacturing guidelines. Configuration storage, clocking, and I/O standards should be selected early because they affect both the PCB and the programmable design.

This product page combines the verified device identity with application guidance, package-aware comparisons, and practical FPGA design notes. It also distinguishes same-family ordering options from their documented resource and ordering differences, helping engineers assess migration paths without overlooking speed, temperature, or board-level compatibility.

直接替换替代料: LFE2-6SE-5F256C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LFE2-6SE-5F256C (相同外形与封装尺寸) ——差异在于 Device Type, Logic Elements, Package, User I/O.

Lattice Semiconductor
Device Type: ECP2 Field Programmable Gate Array (FPGA)
Logic Elements: 6,000 cells
Package: 256-pin FBGA, 17 x 17 mm
对比 LFE2-6SE-5F256C →

LFE2-6SE-5FN256C

✅ 直接替换
📦 256-FPBGA
Ordering suffix changes from F256C to FN256C; the documented 6,000 logic cells, 190 user I/O, 56,320 bits of RAM, -5 speed grade, and 256-FPBGA package remain equal.

📋 参考替代料(不在目录中)

LFE2-6E-5F256C

✅ 直接替换
Lattice Semiconductor
📦 256-FPBGA
ECP2 Field Programmable Gate Array (FPGA) · 6,000 cells · 750 LABs · 190 pins · 56,320 bits · 1.14 V to 1.26 V · 1.2 V · 0°C to 85°C

联系询价

查看数据手册 →

LFE2-6E-5FN256C

✅ 直接替换
Lattice Semiconductor
📦 256-FPBGA
ECP2 · 6,000 cells · 190 I/O · 56,320 bit · 55 Kb · 1.2 V · -5 · 256-FPBGA (FN256)

联系询价

查看数据手册 →

LFE2-6SE-5F256C 最大额定值与电气特性

FPGA Family ECP2
Logic Cells 6,000 cells
User I/O 190 I/O
Embedded Block RAM 56,320 bits
Core Supply Voltage 1.14 V to 1.26 V
最大时钟频率 311 MHz
Device Type Field Programmable Gate Array (FPGA)
Logic Elements 6,000 elements
Architecture ECP2 with embedded DSP, block RAM, and programmable I/O
封装 256-FPBGA, 17 mm x 17 mm
Package Pin Count 256 balls
安装类型 Surface mount
Speed Grade -5
Temperature Grade Commercial
RoHS Compliance unknown
REACH Compliance unknown

LFE2-6SE-5F256C 256 balls 引脚配置指南

LFE2-6SE-5F256C(256 balls 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

LFE2-6SE-5F256C 的 256 balls 封装引脚图

暂无详细引脚数据: LFE2-6SE-5F256C.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LFE2-6SE-5F256C 适用于 6 应用s: Industrial Equipment Controller, Data Acquisition Front End, Communication Gateway, Motor Control and Sequencing, Embedded Signal Processing, Secure Embedded Control.

🏭

Industrial Equipment Controller

The LFE2-6SE-5F256C fits compact industrial controllers that combine machine sequencing, sensor conditioning logic, and multiple digital interfaces. Its 6,000 logic cells can implement control state machines, interlocks, timing blocks, and communication protocols, while 190 user I/O provides connections to sensors, actuators, encoders, and discrete digital devices. The 56,320 bits of embedded RAM can hold operating modes, counters, diagnostic records, or short command queues. Its 1.14 V to 1.26 V core supply suits low-voltage digital architectures, although industrial deployment also requires verification of the specified temperature range, isolation strategy, EMC design, and environmental qualification.

📊

Data Acquisition Front End

The LFE2-6SE-5F256C is suitable for coordinating parallel sensors, external memory, and a host processor in a compact data-acquisition system. Programmable I/O can organize timing and control signals, while the 56,320 bits of block RAM provide limited buffering for samples, descriptors, and calibration values. The 6,000 logic cells can support channel multiplexing, trigger logic, format conversion, and simple digital filtering. Designers should calculate the memory width, routing demand, and maximum clock rate for the selected capture architecture. External memory or a higher-capacity FPGA may be required when continuous high-rate streams exceed the internal RAM and real-time processing budget.

🌐

Communication Gateway

The LFE2-6SE-5F256C can serve as the programmable protocol and routing element in a small communication gateway. Its 6,000 logic cells and embedded DSP resources can support framing, CRC generation, byte conversion, filtering, and serial-to-parallel protocol adaptation, while 190 user I/O leaves ample connections for multiple interface levels. The 56,320-bit block RAM can buffer short packets or descriptors and reduce host interrupts. Practical implementations should account for clock-domain crossings, I/O voltage compatibility, protocol timing, and routing congestion. This device is most appropriate for moderate-width gateways rather than designs requiring continuous multi-gigabit streaming or very large packet buffers.

⚡

Motor Control and Sequencing

The LFE2-6SE-5F256C fits motor-control and sequencing systems that require deterministic logic close to power converters and actuators. The programmable logic can coordinate commutation timing, direction control, interlocks, fault capture, and digital command decoding, while 190 user I/O supports gate drivers, position sensors, switches, and status indicators. Internal RAM can retain trip events, operating counters, or calibration tables. The 1.2 V core class simplifies integration with modern low-voltage control logic, but the power stage, gate-driver interface, grounding, and protection circuitry remain separate design tasks. Timing closure must account for PWM generation, feedback paths, and the documented maximum operating frequency.

🔧

Embedded Signal Processing

The LFE2-6SE-5F256C supports small embedded DSP functions where programmable filters, waveform generation, or fixed-point arithmetic must coexist with control logic. Its ECP2 architecture provides embedded DSP capability alongside 6,000 logic cells, and the 56,320 bits of RAM can store coefficients, sample histories, and lookup data. A 311 MHz maximum clock figure supports timing planning, although an individual design will normally operate below that value after routing and pipeline requirements are considered. Fixed-point analysis should establish word lengths and accumulator growth, while vendor timing estimates and post-route simulation should confirm multiplier, RAM, and I/O performance before production.

🔒

Secure Embedded Control

The LFE2-6SE-5F256C can implement authentication, key handling, command filtering, and boot-control functions within a compact embedded platform. Its configurable logic can support cryptographic control paths and protocol-specific checks, while the 56,320-bit RAM can hold short working buffers without adding a general-purpose processor to every board. The 190-I/O count permits integration with secure elements, storage devices, status indicators, and external processors. Security still depends on the programmed implementation, secret provisioning process, external key-storage architecture, physical tamper controls, and update policy. Do not treat the FPGA as inherently secure; review the relevant design guidance and verify the exact device functions used in production.

推荐产品汇总

LFE2-6SE-5FN256C Same-family ECP2 FPGA option 用于: Industrial Equipment Controller, Data Acquisition Front End, Communication Gateway, Motor Control and Sequencing, Embedded Signal Processing, Secure Embedded Control LFE2-6E-5F256C Lattice Semiconductor 用于: Industrial Equipment Controller, Communication Gateway, Motor Control and Sequencing, Secure Embedded Control LFE2-6E-5FN256C Lattice Semiconductor 用于: Data Acquisition Front End, Embedded Signal Processing
What are the key specifications of LFE2-6SE-5F256C that engineers should know?
The LFE2-6SE-5F256C is a 6,000-cell ECP2 FPGA with 190 user I/O, 56,320 bits of embedded block RAM, a 1.14 V to 1.26 V core supply range, and a 256-FPBGA package. According to the Lattice Semiconductor ECP2 product documentation, the device combines configurable logic, DSP resources, RAM, and programmable I/O in a surface-mount 17 mm by 17 mm package. These figures define its capacity for control logic, interfaces, short data buffers, and compact embedded signal processing.
Where can I download the LFE2-6SE-5F256C datasheet and pinout?
The LFE2-6SE-5F256C datasheet and pin information are available through Lattice Semiconductor's ECP2 product page and the device documentation linked from that page. According to the manufacturer documentation, engineers should use the ECP2 package pinout, configuration, electrical characteristics, and layout sections together. The device uses a 256-FPBGA package, so PCB land patterns and ball assignments must be taken from the manufacturer package drawing rather than inferred from a generic BGA layout.
What can replace LFE2-6SE-5F256C?
The closest documented same-family choices are LFE2-6SE-5FN256C, LFE2-6E-5F256C, and LFE2-6E-5FN256C, all using the same 256-FPBGA class and matching the target's 6,000-cell and 190-I/O resource level. The -5FN variant retains the -5 speed designation, while the -6E variants belong to the ECP2 ECP2-6E family. Confirm configuration compatibility, I/O standards, speed behavior, and PCB ball assignments before using any of them as a drop-in replacement.
Is LFE2-6SE-5F256C the same as LFE2-6SE-5FN256C?
LFE2-6SE-5F256C and LFE2-6SE-5FN256C both appear as 6K-cell ECP2 devices with 190 user I/O, 56,320 bits of RAM, a 256-FPBGA package, and a -5 speed designation. The ordering codes differ at the FN versus F package-ordering portion, so engineers should check the ordering-information table for the exact finish, marking, or environmental distinction. Do not infer interchangeability from similar resource counts alone; verify the manufacturer ordering guide and package drawing.
LFE2-6SE-5F256C vs LFE2-6E-5F256C - which is better for a new design?
Choose LFE2-6SE-5F256C when the design specifically requires the ECP2 SE family and its documented operating behavior; choose LFE2-6E-5F256C when the ECP2 6E device satisfies the timing, I/O, DSP, RAM, and configuration requirements of the design. Both are listed with 6,000 logic cells, 190 I/O, 56,320 bits of RAM, and a 256-FPBGA package. The family distinction can affect internal implementation and performance even when headline resource totals match, so validate the complete design with the selected device's timing and pinout documentation.
When should I choose LFE2-6SE-5F256C over LFE2-6E-5F256C?
Choose LFE2-6SE-5F256C when an established ECP2 SE architecture, previously validated timing, or an exact board requirement depends on that family member. Its documented capacity includes 6,000 logic cells, 190 I/O, 56,320 bits of block RAM, and operation from 1.14 V to 1.26 V. The LFE2-6E-5F256C may be attractive for new designs when its complete electrical and timing specification satisfies the system, but matching package and resource totals alone does not prove equivalent timing or internal behavior.
Is LFE2-6SE-5F256C suitable for industrial control and automation systems?
The LFE2-6SE-5F256C can suit industrial control designs that need programmable logic, parallel interfaces, and embedded RAM in one package. Its 6,000 logic cells, 190 user I/O, and 56,320-bit RAM capacity can support sequencing, machine-state logic, I/O expansion, and short communication buffers. Industrial suitability also depends on the specified operating-temperature range, industrial qualification requirements, power sequencing, isolation, and environmental compliance, which must be confirmed in the manufacturer documentation before deployment.
What is the power supply voltage required by LFE2-6SE-5F256C?
The LFE2-6SE-5F256C operates from a 1.14 V to 1.26 V core supply, corresponding to the documented 1.2 V device class. According to the manufacturer ECP2 documentation, the package may also expose other supply and configuration-related pins, so the complete power architecture must follow the device pinout and recommended operating conditions. Use local low-impedance decoupling and confirm the required supply sequencing and configuration voltage levels before releasing the PCB design.
How much memory and I/O does LFE2-6SE-5F256C provide?
The LFE2-6SE-5F256C provides 56,320 bits of embedded block RAM and 190 user I/O in addition to 6,000 logic cells. According to the Lattice Semiconductor ECP2 product information, the RAM can support small packet buffers, sampled-data storage, lookup tables, and general-purpose state retention. The 190-I/O count simplifies connections to parallel buses, sensors, actuators, and memory interfaces, although each implemented interface also consumes configurable I/O resources and must conform to the selected voltage and standards.
What is the package and mounting style of LFE2-6SE-5F256C?
The LFE2-6SE-5F256C is supplied in a 256-FPBGA package measuring 17 mm by 17 mm for surface mounting. This package offers 256 balls and supports the high I/O count required by the device. According to the manufacturer package information, the exact ball map, solder-mask and paste layers, thermal design, and assembly process must follow the official package drawing. A generic 256-BGA symbol should not be used as a substitute for the manufacturer's footprint data.
Can LFE2-6SE-5F256C be used for digital signal processing?
The LFE2-6SE-5F256C can perform DSP functions using its embedded DSP and configurable logic resources, with 6,000 logic cells and 56,320 bits of block RAM available for the implementation. Suitable tasks include digital filtering, waveform generation, fixed-point arithmetic, and data acquisition control. The device is limited by its resource budget and maximum clock frequency, so estimate multiplier, RAM, routing, and timing demand before committing to a design. Use vendor timing estimates and post-route simulation for the final implementation.
Where can I buy LFE2-6SE-5F256C and check current availability?
Use the Request a Quote form on this page to request the current LFE2-6SE-5F256C price, stock position, manufacturer packaging options, and lead time. The component is a 6,000-cell ECP2 FPGA in a 256-FPBGA package, so traceable ordering code, date code, and condition should be confirmed during procurement. Requesting a formal quotation is preferable to relying on an aging cached listing, particularly when production continuity and counterfeit-risk controls are important.
What is the price of LFE2-6SE-5F256C?
The current LFE2-6SE-5F256C price depends on order quantity, authorized supply, device condition, date code, and requested packaging. Submit the target quantity and purchasing details through the Request a Quote form on this page for a current quotation. The device is identified as a 6,000-cell ECP2 FPGA with 190 I/O, 56,320 bits of RAM, and a 256-FPBGA package; those specifications should be included on the purchase order to prevent substitution or package mismatch.
What is the lead time and stock status for LFE2-6SE-5F256C?
Use the Request a Quote form on this page for the current stock position, minimum order quantity, production lead time, and available shipment quantities for LFE2-6SE-5F256C. Lead time can vary with procurement volume, allocation, date code, and packaging configuration, so an immediate inventory message should not be treated as a production commitment. The order should identify the complete 256-FPBGA ordering code and any required traceability or inspection requirements.
Is LFE2-6SE-5F256C in stock?
Current inventory for LFE2-6SE-5F256C should be confirmed through the Request a Quote form on this page. The request should state the required quantity, target date, permitted date-code age, and packaging preference. Because current market listings can change without notice, stock should be validated before purchase orders or production schedules are released. The critical ordering identity is the complete LFE2-6SE-5F256C part number in a 256-FPBGA package.
What is the best Lattice Semiconductor equivalent for LFE2-6SE-5F256C?
LFE2-6SE-5FN256C is the closest same-brand ordering option identified for LFE2-6SE-5F256C because it retains the ECP2 SE family, -5 speed designation, 6,000 logic cells, 190 I/O, 56,320 bits of RAM, and 256-FPBGA package class. Other documented ECP2 choices include LFE2-6E-5F256C and LFE2-6E-5FN256C. Final interchangeability still depends on the exact ordering suffix, electrical limits, timing, configuration method, and official package data.

工程参考数据: LFE2-6SE-5F256C ——对比、设计指导和合规信息。

选型指南

Choose LFE2-6SE-5F256C when an existing ECP2 SE design, validated timing model, or exact board qualification depends on that ordering code. Its documented 6,000 logic cells, 190 user I/O, 56,320 bits of block RAM, 311 MHz maximum clock figure, and 256-FPBGA package make it suitable for compact control, interface, and signal-processing systems. LFE2-6SE-5FN256C is the closest same-family option because it retains the SE family, -5 speed grade, and matching resource totals; consult the ordering-information table before treating it as interchangeable. Consider LFE2-6E-5F256C or LFE2-6E-5FN256C only when the ECP2 6E family satisfies the complete timing, configuration, I/O, and reliability requirements. For every candidate, verify the manufacturer package drawing, operating-temperature limits, power rails, and design-tool support, then rerun synthesis, place-and-route, timing analysis, and system validation on the exact production MPN.

与替代料对比

参数 本产品 LFE2-6SE-5FN256C LFE2-6E-5F256C LFE2-6E-5FN256C
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 256-FPBGA 256-FPBGA 256-FPBGA 256-FPBGA
FPGA Family ECP2 SE ECP2 SE ECP2 6E ECP2 6E
Logic Cells 6,000 cells 6,000 cells 6,000 cells 6,000 cells
User I/O 190 I/O 190 I/O 190 I/O 190 I/O
Embedded Block RAM 56,320 bits 56,320 bits 56,320 bits 56,320 bits
Speed Grade -5 -5 -5 -5
Temperature Grade Commercial Commercial Commercial Commercial

关键差异点

  • Direct ECP2 SE family ordering option with identical headline resources (对比 LFE2-6SE-5FN256C)
  • Keeps the ECP2 SE architecture while offering an ECP2 6E migration path (对比 LFE2-6E-5F256C)
  • Matches the primary capacity and package characteristics of the FN ordering combination (对比 LFE2-6E-5FN256C)

设计说明

Treat the 256-FPBGA land pattern as an exact manufacturing artifact. Use the manufacturer's package drawing for ball coordinates, solder-mask and paste geometry, assembly allowances, and the recommended component placement footprint. Route configuration, clock, ground, and supply connections according to the ECP2 layout guidance, and keep the 1.2 V core return path continuous. A generic 256-BGA library symbol can have incorrect pad or mask geometry even when its nominal ball count is correct.

Follow the manufacturer requirements for core and auxiliary supply rails, including voltage tolerance, sequencing, decoupling, and configuration conditions. The documented core range is 1.14 V to 1.26 V. Place required decoupling capacitors close to their associated power and ground balls, provide a low-impedance return path, and avoid routing noisy switching-current returns beneath the FPGA. Confirm the exact rail list and startup procedure in the device electrical documentation before schematic release.

Budget routing and I/O resources during architecture selection rather than after implementation. The 190 user I/O figure includes resources shared among programmable banks and implemented interfaces, so parallel buses, high-speed serial links, clocks, and dedicated configuration signals compete for package and routing capacity. Use legal I/O standards for each bank, respect voltage compatibility, and reserve pins for configuration and startup. Validate clock jitter, skew, and edge-rate assumptions with post-route timing analysis.

Do not select a replacement solely because its logic-cell, I/O, and RAM totals match. Verify the complete ordering code, configuration method, pin assignments, electrical limits, speed grade, temperature grade, and official BGA drawing. In particular, compare LFE2-6SE-5F256C against LFE2-6SE-5FN256C using the manufacturer's ordering-information table, and evaluate the 6E family independently from the SE family. Migrate the design only after recompiling and rerunning timing and system-level tests on the selected device.

Estimate the FPGA's contribution to board temperature under the expected logic activity, I/O loading, and ambient temperature. Use the manufacturer power table for the selected speed grade and utilization level rather than relying only on the 311 MHz maximum clock figure. Provide copper spreading under the BGA, minimize thermal barriers in the stack-up, and maintain airflow appropriate to the enclosure. Re-evaluate thermal margin when memory, regulators, and neighboring processors share the same heat path.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact ordering code.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

LFE2-6SE-5F256C datasheet LFE2-6SE-5F256C specifications LFE2-6SE-5F256C pinout LFE2-6SE-5F256C datasheet pdf LFE2-6SE-5F256C equivalent LFE2-6SE-5F256C replacement LFE2-6SE-5F256C cross reference LFE2-6SE-5F256C vs LFE2-6SE-5FN256C LFE2-6SE-5F256C 256 FBGA footprint LFE2-6SE-5F256C price LFE2-6SE-5F256C stock Lattice Semiconductor LFE2-6SE-5F256C LFE2-6SE-5F256C industrial controller LFE2-6SE-5F256C signal processing what is LFE2-6SE-5F256C

相关元器件 & 术语

Lattice Semiconductor LFE2-6SE-5F256C LFE2-6SE-5FN256C LFE2-6E-5F256C LFE2-6E-5FN256C ECP2 field-programmable gate array FPGA configurable logic embedded block RAM DSP surface-mount semiconductor FPBGA 256-ball package 1.2 V logic 311 MHz 6,000 logic cells 190 user I/O 56,320 bits industrial automation data acquisition communication gateway motor sequencing digital signal processing
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情