LFE2-6SE-5F256C - 6K LUT ECP2 FPGA | Lattice Semiconductor
MPN: LFE2-6SE-5F256C ✓ 啟用中LFE2-6SE-5F256C 概覽
An FPGA is a semiconductor whose internal digital circuits are configured after manufacture. The LFE2-6SE-5F256C belongs to the ECP2 low-power FPGA family and combines configurable logic, block RAM, programmable I/O, and embedded DSP functions. This makes it a practical platform for consolidating control logic, communication interfaces, and small signal-processing functions into one device instead of using several discrete components.
The principal resource figures are 6,000 logic cells, 190 user I/O, and 56,320 bits of block RAM. Its 1.2 V operating class supports low-voltage digital systems, while the 256-FPBGA package provides a high pin count for parallel buses and multi-channel interfaces. The -5 ordering code identifies the device speed grade, and the C suffix identifies the commercial temperature grade. The exact maximum operating frequency and temperature limits must be confirmed against the manufacturer datasheet before a production design is released.
Within the ECP2 architecture, configurable logic blocks implement Boolean, arithmetic, control, and state-machine functions. Embedded block RAM provides dedicated storage for packet buffers, sampled data, lookup tables, and display or communications data. Programmable I/O blocks support external interfaces, while DSP resources can accelerate multiply-accumulate operations used by filters, waveform generation, and digital signal processing. These functions allow one FPGA to replace combinations of programmable logic and fixed-function digital ICs.
Typical uses include industrial equipment controllers, motor and sequencing logic, data-acquisition front ends, communication gateways, embedded control systems, and compact consumer products. The 190 I/O count is particularly useful when a design must connect multiple sensors, actuators, memory devices, and parallel buses. The 56,320-bit RAM inventory is also suitable for buffering short frames, retaining sampled values, or implementing fixed-size lookup tables without external memory.
Power and layout planning remain central to a successful BGA implementation. Confirm every supply rail, decoupling requirement, configuration interface, and pin assignment in the manufacturer datasheet. Preserve the specified ball assignments and follow the recommended land pattern, fanout, and manufacturing guidelines. Configuration storage, clocking, and I/O standards should be selected early because they affect both the PCB and the programmable design.
This product page combines the verified device identity with application guidance, package-aware comparisons, and practical FPGA design notes. It also distinguishes same-family ordering options from their documented resource and ordering differences, helping engineers assess migration paths without overlooking speed, temperature, or board-level compatibility.
直接替換替代品,適用於 LFE2-6SE-5F256C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LFE2-6SE-5F256C (相同外形與佔位) — 差異在於 Device Type, Logic Elements, Package, User I/O.
LFE2-6SE-5FN256C
✅ 直接替換📋 參考替代品(不在目錄中)
LFE2-6E-5F256C
✅ 直接替換聯絡詢價
查看資料表 →LFE2-6E-5FN256C
✅ 直接替換聯絡詢價
查看資料表 →LFE2-6SE-5F256C 最大額定值與電氣特性
| FPGA Family | ECP2 |
| Logic Cells | 6,000 cells |
| User I/O | 190 I/O |
| Embedded Block RAM | 56,320 bits |
| Core Supply Voltage | 1.14 V to 1.26 V |
| 最大時脈頻率 | 311 MHz |
| Device Type | Field Programmable Gate Array (FPGA) |
| Logic Elements | 6,000 elements |
| Architecture | ECP2 with embedded DSP, block RAM, and programmable I/O |
| 封裝 | 256-FPBGA, 17 mm x 17 mm |
| Package Pin Count | 256 balls |
| 安裝類型 | Surface mount |
| Speed Grade | -5 |
| Temperature Grade | Commercial |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
LFE2-6SE-5F256C 256 balls 腳位配置指南
LFE2-6SE-5F256C(256 balls 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LFE2-6SE-5F256C.
請參閱 資料表 以查看完整腳位配置。
典型應用
LFE2-6SE-5F256C 適用於 6 應用s: Industrial Equipment Controller, Data Acquisition Front End, Communication Gateway, Motor Control and Sequencing, Embedded Signal Processing, Secure Embedded Control.
Industrial Equipment Controller
The LFE2-6SE-5F256C fits compact industrial controllers that combine machine sequencing, sensor conditioning logic, and multiple digital interfaces. Its 6,000 logic cells can implement control state machines, interlocks, timing blocks, and communication protocols, while 190 user I/O provides connections to sensors, actuators, encoders, and discrete digital devices. The 56,320 bits of embedded RAM can hold operating modes, counters, diagnostic records, or short command queues. Its 1.14 V to 1.26 V core supply suits low-voltage digital architectures, although industrial deployment also requires verification of the specified temperature range, isolation strategy, EMC design, and environmental qualification.
推薦
Data Acquisition Front End
The LFE2-6SE-5F256C is suitable for coordinating parallel sensors, external memory, and a host processor in a compact data-acquisition system. Programmable I/O can organize timing and control signals, while the 56,320 bits of block RAM provide limited buffering for samples, descriptors, and calibration values. The 6,000 logic cells can support channel multiplexing, trigger logic, format conversion, and simple digital filtering. Designers should calculate the memory width, routing demand, and maximum clock rate for the selected capture architecture. External memory or a higher-capacity FPGA may be required when continuous high-rate streams exceed the internal RAM and real-time processing budget.
推薦
Communication Gateway
The LFE2-6SE-5F256C can serve as the programmable protocol and routing element in a small communication gateway. Its 6,000 logic cells and embedded DSP resources can support framing, CRC generation, byte conversion, filtering, and serial-to-parallel protocol adaptation, while 190 user I/O leaves ample connections for multiple interface levels. The 56,320-bit block RAM can buffer short packets or descriptors and reduce host interrupts. Practical implementations should account for clock-domain crossings, I/O voltage compatibility, protocol timing, and routing congestion. This device is most appropriate for moderate-width gateways rather than designs requiring continuous multi-gigabit streaming or very large packet buffers.
推薦
Motor Control and Sequencing
The LFE2-6SE-5F256C fits motor-control and sequencing systems that require deterministic logic close to power converters and actuators. The programmable logic can coordinate commutation timing, direction control, interlocks, fault capture, and digital command decoding, while 190 user I/O supports gate drivers, position sensors, switches, and status indicators. Internal RAM can retain trip events, operating counters, or calibration tables. The 1.2 V core class simplifies integration with modern low-voltage control logic, but the power stage, gate-driver interface, grounding, and protection circuitry remain separate design tasks. Timing closure must account for PWM generation, feedback paths, and the documented maximum operating frequency.
推薦
Embedded Signal Processing
The LFE2-6SE-5F256C supports small embedded DSP functions where programmable filters, waveform generation, or fixed-point arithmetic must coexist with control logic. Its ECP2 architecture provides embedded DSP capability alongside 6,000 logic cells, and the 56,320 bits of RAM can store coefficients, sample histories, and lookup data. A 311 MHz maximum clock figure supports timing planning, although an individual design will normally operate below that value after routing and pipeline requirements are considered. Fixed-point analysis should establish word lengths and accumulator growth, while vendor timing estimates and post-route simulation should confirm multiplier, RAM, and I/O performance before production.
推薦
Secure Embedded Control
The LFE2-6SE-5F256C can implement authentication, key handling, command filtering, and boot-control functions within a compact embedded platform. Its configurable logic can support cryptographic control paths and protocol-specific checks, while the 56,320-bit RAM can hold short working buffers without adding a general-purpose processor to every board. The 190-I/O count permits integration with secure elements, storage devices, status indicators, and external processors. Security still depends on the programmed implementation, secret provisioning process, external key-storage architecture, physical tamper controls, and update policy. Do not treat the FPGA as inherently secure; review the relevant design guidance and verify the exact device functions used in production.
推薦
推薦產品摘要
工程參考資料,適用於 LFE2-6SE-5F256C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LFE2-6SE-5FN256C | LFE2-6E-5F256C | LFE2-6E-5FN256C |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 256-FPBGA | 256-FPBGA | 256-FPBGA | 256-FPBGA |
| FPGA Family | ECP2 SE | ECP2 SE | ECP2 6E | ECP2 6E |
| Logic Cells | 6,000 cells | 6,000 cells | 6,000 cells | 6,000 cells |
| User I/O | 190 I/O | 190 I/O | 190 I/O | 190 I/O |
| Embedded Block RAM | 56,320 bits | 56,320 bits | 56,320 bits | 56,320 bits |
| Speed Grade | -5 | -5 | -5 | -5 |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial |
主要差異化特點
- Direct ECP2 SE family ordering option with identical headline resources (對比LFE2-6SE-5FN256C)
- Keeps the ECP2 SE architecture while offering an ECP2 6E migration path (對比LFE2-6E-5F256C)
- Matches the primary capacity and package characteristics of the FN ordering combination (對比LFE2-6E-5FN256C)
設計說明
Treat the 256-FPBGA land pattern as an exact manufacturing artifact. Use the manufacturer's package drawing for ball coordinates, solder-mask and paste geometry, assembly allowances, and the recommended component placement footprint. Route configuration, clock, ground, and supply connections according to the ECP2 layout guidance, and keep the 1.2 V core return path continuous. A generic 256-BGA library symbol can have incorrect pad or mask geometry even when its nominal ball count is correct.
Follow the manufacturer requirements for core and auxiliary supply rails, including voltage tolerance, sequencing, decoupling, and configuration conditions. The documented core range is 1.14 V to 1.26 V. Place required decoupling capacitors close to their associated power and ground balls, provide a low-impedance return path, and avoid routing noisy switching-current returns beneath the FPGA. Confirm the exact rail list and startup procedure in the device electrical documentation before schematic release.
Budget routing and I/O resources during architecture selection rather than after implementation. The 190 user I/O figure includes resources shared among programmable banks and implemented interfaces, so parallel buses, high-speed serial links, clocks, and dedicated configuration signals compete for package and routing capacity. Use legal I/O standards for each bank, respect voltage compatibility, and reserve pins for configuration and startup. Validate clock jitter, skew, and edge-rate assumptions with post-route timing analysis.
Do not select a replacement solely because its logic-cell, I/O, and RAM totals match. Verify the complete ordering code, configuration method, pin assignments, electrical limits, speed grade, temperature grade, and official BGA drawing. In particular, compare LFE2-6SE-5F256C against LFE2-6SE-5FN256C using the manufacturer's ordering-information table, and evaluate the 6E family independently from the SE family. Migrate the design only after recompiling and rerunning timing and system-level tests on the selected device.
Estimate the FPGA's contribution to board temperature under the expected logic activity, I/O loading, and ambient temperature. Use the manufacturer power table for the selected speed grade and utilization level rather than relying only on the 311 MHz maximum clock figure. Provide copper spreading under the BGA, minimize thermal barriers in the stack-up, and maintain airflow appropriate to the enclosure. Re-evaluate thermal margin when memory, regulators, and neighboring processors share the same heat path.
合規資訊
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact ordering code.