LFE2-6SE-6F256C - 6000-LUT ECP2 FPGA, 357MHz, 256-BGA
料号: LFE2-6SE-6F256C ✓ 量产中LFE2-6SE-6F256C 概述
An FPGA is a programmable-logic semiconductor whose lookup tables, registers, and interconnect resources are configured by a bitstream rather than permanently connected by masks. The ECP2 family belongs to the broader FPGA and programmable-logic hierarchy, combining logic fabric, configurable I/O, embedded memory resources, and dedicated signal-processing capabilities in one device. This makes the LFE2-6SE-6F256C suitable when design rules or interfaces are likely to evolve after prototyping.
The device provides 6,000 logic cells, 56,320 flip-flops, 190 I/O, and S-Series DSP resources according to the manufacturer product listing. Its maximum reported performance is 357 MHz. The 1.2 V operating specification supports modern low-voltage logic implementations, while the 256-pin FBGA package provides high I/O density for designs with numerous parallel, differential, serial, or mixed-signal connections. The package measures 17 x 17 mm according to the indexed datasheet listing.
The LFE2-6SE-6F256C is identified as a 90 nm ECP2 FPGA. Its programmable architecture allows designers to implement control logic, bus arbitration, protocol conversion, data acquisition, and DSP functions in parallel. The S-Series designation corresponds to the ECP2 family feature set listed for the part, including S-Ser DSP capability. Configuration, programming, timing, and I/O details should be checked against the manufacturer ECP2 documentation for the exact device revision.
Typical applications include industrial control systems, communications interfaces, instrumentation, embedded test equipment, video and image processing, sensor fusion, and general-purpose embedded logic. The 190 I/O count is particularly useful for parallel control or data-acquisition designs, while DSP resources can accelerate filtering, arithmetic, and signal-conditioning operations without relying on a separate processor for every function.
PCB implementation requires careful treatment of the 256-ball BGA land pattern, power and ground distribution, decoupling, and high-speed routing. Follow the package ball map, recommended power architecture, and decoupling guidance in the Lattice ECP2 documentation. Validate signal integrity and timing after PCB fabrication rather than relying only on schematic-level assumptions.
This product page consolidates the exact device identity, package and capacity information with application guidance, comparison considerations, and practical design notes. It helps engineers distinguish the ECP2 options by logic capacity, speed, temperature suffix, and package while emphasizing that a valid hardware replacement still requires pinout, timing, configuration, and lifecycle verification.
直接替换替代料: LFE2-6SE-6F256C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LFE2-6SE-6F256C (相同外形与封装尺寸) ——差异在于 Device Type, Logic Cells.
LFE2-6SE-6FN256C
✅ 直接替换📋 参考替代料(不在目录中)
LFE2-6E-6F256C
✅ 直接替换联系询价
查看数据手册 →LFE2-6SE-6FN256I
✅ 直接替换📋 参考替代料(不在目录中)
LFE2-6SE-6F256C 最大额定值与电气特性
| Device Type | ECP2 Field Programmable Gate Array (FPGA) |
| Logic Cells | 6,000 cells |
| Maximum Performance | 357 MHz |
| User I/O | 190 I/O |
| Flip-Flops | 56,320 |
| Core Supply Voltage | 1.2 V |
| DSP Resource | S-Ser DSP |
| Process Technology | 90 nm |
| 封装 | 256-pin FBGA |
| Package Body Size | 17 x 17 mm |
| 安装类型 | Surface Mount |
| Lead-Free Status | Lead Free |
LFE2-6SE-6F256C 17 x 17 mm 引脚配置指南
LFE2-6SE-6F256C(17 x 17 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LFE2-6SE-6F256C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LFE2-6SE-6F256C 适用于 6 应用s: Industrial Control Logic, Communications Interface Bridging, Data Acquisition Systems, Signal Processing, Embedded Test and Measurement, Video and Image Processing.
Industrial Control Logic
The LFE2-6SE-6F256C fits centralized industrial controllers that combine parallel machine inputs, sequencing logic, communications, and status monitoring in one programmable device. Its 6,000 logic cells and 56,320 flip-flops provide substantial parallel processing capacity, while 190 I/O support dense control connections without requiring multiple low-density devices. The 357 MHz maximum performance allows demanding state machines and timing-sensitive logic to execute concurrently. S-Ser DSP resources can also handle selected arithmetic functions close to the I/O. The 256-pin FBGA requires careful power delivery, decoupling, and escape-routing planning on the PCB.
推荐
Communications Interface Bridging
The LFE2-6SE-6F256C is suitable for protocol conversion, data routing, and multi-interface control where protocol behavior may evolve during development. Programmable logic can bridge parallel buses to serial links, generate timing control, and validate traffic without relying on a fixed application-specific ASIC. The device's 190 I/O allow several external interfaces to coexist, while S-Ser DSP resources can support signal operations close to the fabric. The 357 MHz performance target is useful for wide buses and moderately complex framing logic. Signal-integrity and timing validation remain essential at the selected I/O standards and board-level data rates.
推荐
Data Acquisition Systems
The LFE2-6SE-6F256C can implement parallel sampling control, trigger sequencing, filtering, and data packing in instrumentation and test systems. Its 190 I/O provide ample connections for sensor inputs, capture clocks, and control outputs, while 6,000 logic cells can support acquisition state machines and data-path control. S-Ser DSP resources add dedicated processing capability for arithmetic and filtering tasks, reducing the need for separate logic. The 1.2 V core operation must be integrated with the appropriate I/O supply and interface standards. PCB layout should preserve clock integrity, isolate analog paths, and route high-speed acquisition signals away from switching nodes.
推荐
Signal Processing
The LFE2-6SE-6F256C is appropriate for fixed-function DSP implemented in programmable logic, particularly filtering, modulation, correlation, and sampled-data conditioning. Its S-Ser DSP resources provide dedicated arithmetic capability, while the 6,000 logic cells handle control, sequencing, data movement, and interface adaptation. The 357 MHz maximum performance supports pipelined designs that distribute operations across multiple clock cycles. Engineers should map DSP blocks carefully to preserve routing resources and timing margin, especially when high-speed transceivers are not used for data transfer. Clocking, reset distribution, and deterministic I/O timing need careful review before production implementation.
推荐
Embedded Test and Measurement
The LFE2-6SE-6F256C fits programmable test systems that need pattern generation, sequencing, result comparison, and control interfaces in a compact package. Its 190 I/O can connect instruments, fixtures, and communication channels, while the 6,000-cell fabric supports parallel test sequences and embedded control logic. S-Ser DSP resources can accelerate selected measurement calculations without monopolizing general-purpose logic. The 256-pin FBGA provides high pin density but demands disciplined escape routing and BGA assembly capability. Confirm the selected speed and temperature suffix against the actual test environment before releasing the production BOM.
推荐
Video and Image Processing
The LFE2-6SE-6F256C can support pixel pipelines, timing generation, data-format conversion, and control functions in compact image-processing modules. The 357 MHz maximum performance and S-Ser DSP resources are useful for parallel pixel operations, filtering, and timing-sensitive pipelines, while 190 I/O can connect sensors, memory, and downstream processors. The 1.2 V core supply simplifies integration with modern logic voltage domains, although each supported I/O standard still requires correct bank configuration. High-speed video routing must be length matched and kept away from noisy sources. Validate the complete interface timing and memory bandwidth against the target resolution and frame rate.
推荐
推荐产品汇总
工程参考数据: LFE2-6SE-6F256C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LFE2-6SE-6FN256C | LFE2-6E-6F256C | LFE2-6SE-6FN256I |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 256-pin FBGA | 256-pin FBGA - same | 256-pin FBGA - same | 256-pin FBGA - same |
| Device Family | ECP2 | ECP2 | ECP2 | ECP2 |
| Series | S-Series | S-Series | E-Series | S-Series |
| Logic Cells | 6,000 cells | 6,000 cells | 6,000 cells | 6,000 cells |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Temperature Suffix | C commercial suffix | C commercial suffix | C commercial suffix | I industrial suffix |
关键差异点
- S-Series feature positioning within the 6,000-cell ECP2 family (对比 LFE2-6E-6F256C)
- Commercial temperature suffix alignment with the reference ordering code (对比 LFE2-6SE-6FN256I)
- Direct 6,000-cell family positioning with high user-I/O density (对比 LFE2-12SE-7F256C)
设计说明
Design the 256-ball FBGA layout from the exact package ball map and Lattice PCB guidance. Provide short, low-impedance supply connections, continuous or well-distributed ground planes, and local decoupling at every required power ball. Plan BGA escape routing before fixing component placement so that the 190 available I/O can be routed without excessive layer transitions or conflicts with power and ground grids.
Treat clock, high-speed serial, and source-synchronous interfaces as constrained routes rather than general-purpose logic nets. Match lengths where the selected interface requires it, avoid routing them over split planes, and maintain return paths beneath the signal layer. Validate timing and signal integrity with the actual I/O standards, external component models, and PCB stack-up because logic-cell timing alone does not guarantee board-level performance.
Budget the 1.2 V core rail and every I/O supply independently. Estimated: core dissipation equals 1.2 V multiplied by the selected core current, while total board input power must also include I/O-bank current and configuration behavior. Confirm both average and worst-case activity in the Lattice power tables, then size regulators, copper connections, and thermal paths from the resulting dissipation rather than from the 357 MHz frequency alone.
Do not treat another 6,000-cell ECP2 ordering code as interchangeable merely because it uses a 256-pin FBGA. Check the complete ball map, I/O standards, supply banks, speed grade, temperature suffix, configuration interface, and bitstream requirements. The ECP2 family comparison explicitly notes that package, speed, and temperature ratings can differ, so a successful board fit does not by itself establish drop-in compatibility.
合规信息
The indexed LFE2-6SE-6F256C listing identifies the device as lead free. RoHS, REACH, halogen-free, and conflict-minerals statements were not identified in the referenced product information.