Texas Instruments

LM2903DGKR - Dual Open-Collector Comparator | Texas Instruments

料号: LM2903DGKR ✓ 量产中
2 V to 36 V Vdss 8-pin VSSOP Package
最小起订量: 1 |

LM2903DGKR 概述

Texas Instruments LM2903DGKR is a dual differential comparator with two independent comparison channels, open-collector outputs, and rail-to-rail input capability in an 8-pin VSSOP package. The device operates from 2 V to 36 V, supports common-mode input voltages from -1 V to +18 V, and has a typical response time of 1.3 microseconds. It is intended for general-purpose voltage comparison, threshold detection, and interface applications.

A comparator is an integrated circuit that compares two input voltages and produces a logic-level output indicating which input is higher. In the broader semiconductor hierarchy, LM2903 belongs to the comparator and linear IC family, where it bridges analog signal sensing and digital control. Each LM2903 channel combines a differential input pair with an open-collector output, allowing the output stage to pull a logic rail low when the comparison state requires it.

The LM2903DGKR provides two channels in one package, reducing board area compared with separate single comparators. Its open-collector outputs support wired-AND behavior when multiple channels pull a shared bus low, while external pull-up resistors establish the high logic voltage. Rail-to-rail input capability extends the usable common-mode range toward the supply rails, which is useful in battery-powered and low-voltage systems. Its stated 1.3-microsecond response time supports general-purpose detection rather than high-speed timing applications.

The operating range of 2 V to 36 V makes the device suitable for low-voltage control circuits and higher-voltage industrial systems. Common-mode operation from -1 V to +18 V permits signal sensing beyond the lower supply rail. Each output remains electrically open at the collector, so designers can select pull-up voltage, interface to open-drain logic, or connect several outputs to a shared bus. The 8-pin VSSOP package supports compact surface-mount layouts but requires careful handling because its lead pitch is narrower than that of standard SOIC packages.

Typical uses include DC overvoltage and undervoltage detection, sensor-threshold conditioning, industrial control inputs, battery monitoring, and open-drain logic interfacing. In each case, resistor values should be chosen from the applied input range, output pull-up requirement, output leakage, and permissible sink current rather than from a single fixed rule.

When laying out an LM2903DGKR circuit, place input and output components close to their associated pins and keep switching-current paths away from the differential inputs. Add a local supply bypass capacitor to limit transient coupling into the comparison threshold. The open-collector output also requires a pull-up resistor in every configuration where a valid high output is required.

This product record combines the manufacturer ordering information, package and functional characteristics, verified replacement candidates, and practical layout guidance. It is intended to help engineers evaluate LM2903DGKR for open-collector comparator designs while accounting for voltage range, response time, channel count, and board-space constraints.

直接替换替代料: LM2903DGKR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LM2903DGKR (相同外形与封装尺寸) ——差异在于 Comparator Type, Package, Output Type.

Texas Instruments
Comparator Type: Dual differential comparator
Package: 8-VSSOP (8-MSOP, 0.118 inch width)
对比 LM2903DGKR →
Texas Instruments
Comparator Type: Dual differential voltage comparator
Package: 8-VSSOP
Output Type: Open collector
对比 LM2903DGKR →

LM2903BIDGKR

✅ 直接替换
Texas Instruments
📦 8-pin VSSOP
Dual differential comparator · 2 independent channels · 38 V · 2 V to 36 V · Rail-to-rail · ±38 V · 0.37 mV maximum · 3.5 nA maximum

联系询价

查看数据手册 →

LM2903DGKR

✅ 直接替换
Texas Instruments
📦 8-MSOP/VSSOP
Dual differential, general-purpose comparator · 2 channels · Open-collector · Rail-to-rail · 2 V to 36 V · -1 V to +18 V · 1.3 us · 8-pin VSSOP

联系询价

查看数据手册 →

LM2903DGKR 最大额定值与电气特性

Comparator Type Dual differential, general-purpose comparator
Number of Channels 2 channels
输出类型 Open-collector
Input Common-Mode Capability Rail-to-rail
Supply Voltage Range 2 V to 36 V
Common-Mode Input Voltage Range -1 V to +18 V
Response Time 1.3 us
封装 8-pin VSSOP
Package Family VSSOP-8 surface-mount family
安装类型 Surface mount

LM2903DGKR 引脚配置

MSOP-8 Package Pinout Diagram MSOP-8 3x3mm, P0.65mm, JEDEC MO-187. 1 8 2 7 3 6 4 5 MSOP-8
引脚 1 1OUT — Open-collector output for comparator channel 1
引脚 2 1IN- — Inverting input for comparator channel 1
引脚 3 1IN+ — Non-inverting input for comparator channel 1
引脚 4 GND — Ground connection
引脚 5 2IN+ — Non-inverting input for comparator channel 2
引脚 6 2IN- — Inverting input for comparator channel 2
引脚 7 2OUT — Open-collector output for comparator channel 2
引脚 8 VCC — Positive supply connection

典型应用

LM2903DGKR 适用于 6 应用s: Industrial Voltage Threshold Detection, Battery Pack Overvoltage Detection, Sensor Signal Conditioning, Open-Drain Logic Interfacing, Motor Control and Drive Monitoring, Consumer and Communication Threshold Logic.

🏭

Industrial Voltage Threshold Detection

The LM2903DGKR suits industrial control inputs that determine whether a monitored voltage is above or below a defined threshold. Its 2 V to 36 V operating range supports a wide range of supplied systems, while the -1 V to +18 V common-mode input range allows sensing near the lower rail. Place the threshold-setting divider at the appropriate comparison input and use the 1.3 us response time for ordinary alarm and interlock functions. The open-collector output can drive a pulled-up status line or participate in a wired fault bus. Industrial implementation should also account for transients, grounding, and the separation of high-energy wiring from sensitive comparator traces.

⚡

Battery Pack Overvoltage Detection

LM2903DGKR can supervise a battery-derived voltage and assert a fault indication when the monitored node crosses a selected limit. The comparator's 2 V minimum operating voltage and -1 V minimum common-mode input voltage provide useful flexibility when sensing a rail near the lower supply boundary. A resistor-divider network establishes the reference, and the open-collector output drives a pulled-up fault signal with its polarity determined by which differential input receives the reference. For battery systems, select divider resistors for the actual cell chemistry and fault threshold, then confirm input current, transient energy, and the output pull-up voltage in the complete design.

🧩

Sensor Signal Conditioning

The LM2903DGKR is useful when a sensor produces a slowly changing analog signal that must be converted into a thresholded digital decision. Its differential inputs allow a sensed voltage to be compared with a locally generated reference, and its 1.3 us response time is suitable for many temperature, position, and level signals that do not require nanosecond decision speed. Rail-to-rail input operation supports low-voltage sensing systems. Place the source and reference paths close to the input pins, bypass the supply locally, and route the open-collector output away from sensitive sensor wiring. Add hysteresis when the threshold signal is noisy or when chatter at the switching point could cause repeated downstream actions.

🌐

Open-Drain Logic Interfacing

LM2903DGKR can act as the analog decision stage in an open-drain or open-collector bus because each output can pull a shared line low when its comparison condition is met. This architecture supports wired-AND behavior, external pull-up selection, and isolation between the comparator output and a higher-voltage or lower-voltage logic domain. Use each output with an appropriate pull-up resistor, verify the maximum sink current and logic-level compatibility, and avoid exceeding the 36 V supply rating. The 8-pin VSSOP footprint saves board area, but its narrow lead pitch and exposed thermal considerations should be incorporated into assembly planning and PCB design rules.

🔧

Motor Control and Drive Monitoring

The LM2903DGKR can monitor a control-system voltage or protected feedback node before allowing a motor-drive stage to operate. Its dual-channel architecture permits two independent comparisons, such as an enable condition and a current-sense threshold, within one package. The 1.3 us response time supports general-purpose protection rather than protection requiring sub-microsecond timing. Because motor environments contain switching noise and large transients, keep the comparator away from motor-current paths, provide a local supply bypass, and use filtered references. The open-collector output can pull up a fault or disable line, but the external pull-up and downstream logic must remain compatible with the operating voltage and fault-management architecture.

📱

Consumer and Communication Threshold Logic

LM2903DGKR can implement simple decision logic in consumer accessories, communications equipment, and embedded control systems where two analog quantities must be compared. The compact 8-pin VSSOP package fits space-constrained boards, and the dual configuration supports channel pairing without requiring two separate packages. A typical circuit applies a resistor-divider reference to one input, feeds the sensed or derived voltage to the other, and uses the open-collector result to control a pulled-up enable or status signal. Design the threshold around the 2 V to 36 V operating range and the -1 V to +18 V common-mode range, and include hysteresis where the compared signal changes slowly.

What are the key specifications of LM2903DGKR that engineers should know?
The LM2903DGKR is a dual open-collector comparator operating from 2 V to 36 V with a 1.3 us response time. According to the Texas Instruments LM2903 product information, it provides two differential comparison channels, rail-to-rail input capability, and common-mode input operation from -1 V to +18 V. The device is packaged in an 8-pin VSSOP. These characteristics make it appropriate for general-purpose threshold detection, voltage supervision, and open-drain interface circuits.
What is the operating voltage range of LM2903DGKR?
The LM2903DGKR operates from 2 V to 36 V. According to the Texas Instruments LM2903 product page and the component listing information for this exact ordering code, the comparator also accepts a common-mode input range from -1 V to +18 V. This wide supply range supports both compact low-voltage systems and higher-voltage industrial control environments, while the specified common-mode range allows sensing below the lower supply rail.
Where can I download the LM2903DGKR datasheet PDF?
The LM2903DGKR datasheet and ordering information are available from the Texas Instruments LM2903 product page. Open the manufacturer page, select the LM2903DGKR orderable part, and use its datasheet link for the electrical characteristics, pin configuration, and application guidance. The package is an 8-pin VSSOP, so the package drawing and pinout in the manufacturer datasheet should be used when laying out the PCB.
Where can I find the LM2903DGKR pinout?
The LM2903DGKR pinout is defined by the 8-pin VSSOP arrangement used by the LM2903 family. According to the Texas Instruments LM2903 documentation, the package contains supply and ground pins, two differential input pairs, and two open-collector outputs. Use the pin-description table and package drawing in the manufacturer datasheet when assigning PCB tracks, especially because the VSSOP lead pitch is narrower than that of a standard SOIC package.
Where can I buy LM2903DGKR and check current availability?
Use the Request a Quote form on this page to ask about LM2903DGKR availability, lead time, and order quantity. The exact orderable code is LM2903DGKR, and Texas Instruments identifies it in the 8-pin VSSOP package. Confirm the mounted package suffix and delivery format before ordering, and request current lifecycle and lead-time confirmation for the quantity required by the production build.
What is the price of LM2903DGKR?
Use the Request a Quote form on this page for the current LM2903DGKR price and volume terms. Pricing depends on order quantity, package and shipment configuration, availability, and the purchasing schedule. The form allows buyers to request a current quote without relying on a static listing value that may no longer reflect market conditions or the required production volume.
What is the lead time for LM2903DGKR?
The current lead time for LM2903DGKR should be requested through the Request a Quote form on this page using the required quantity and delivery destination. Lead time can vary with order volume, assembly packaging, inventory position, and shipment method. For production planning, provide the planned build schedule and annual usage so the supplier can quote the most relevant availability and delivery option.
Is LM2903DGKR in stock?
Current LM2903DGKR stock should be confirmed through the Request a Quote form on this page. The exact Texas Instruments orderable code shown on this page is LM2903DGKR in an 8-pin VSSOP package. Include the required quantity, target date, and shipment destination in the request so the response can reflect the correct packing configuration and delivery schedule.
What can replace LM2903DGKR?
The closest identified replacement is the Texas Instruments LM2903BIDGKR because the manufacturer describes the LM2903B family as a drop-in replacement for the original LM2903 family. The two-package choices should still be checked against channel functions, supply limits, and output requirements before substitution. For a direct board-level replacement, confirm the complete pin arrangement and operating limits in the manufacturer documentation rather than relying only on the family name.
Can ROHM LM2903DGKR replace Texas Instruments LM2903DGKR?
The ROHM LM2903DGKR uses the same 8-MSOP or VSSOP package designation and the same comparator orderable code, so it is the strongest identified cross-manufacturer candidate for a board-level comparison. Because manufacturer-specific electrical limits, test methods, markings, and quality documentation can differ, engineers should compare the two datasheets before approving the change. Pin function and supply compatibility should be confirmed rather than inferred from the matching MPN alone.
LM2903DGKR vs LM2903BIDGKR - which is better for an industrial design?
Choose LM2903BIDGKR when its newer B-family electrical ratings are needed, including the manufacturer-stated 38 V maximum rating, 2 kV HBM ESD rating, 1 us response time, and 0.37 mV low input offset. The original LM2903DGKR is listed with a 2 V to 36 V supply range and 1.3 us response time. Both are identified in the 8-pin VSSOP family, but final suitability still depends on channel behavior, qualification needs, and system tolerances.
What is the difference between LM2903DGKR and LM2903BIDGKR?
The principal documented difference is that LM2903BIDGKR belongs to the LM2903B family, which offers an increased maximum rating of 38 V, a 1 us response time, 0.37 mV low input offset, 3.5 nA low input bias current, and 200 uA supply current per comparator. The original LM2903DGKR is described with a 2 V to 36 V supply range and 1.3 us response time. The B version is identified as a drop-in replacement for LM2903.
When should I choose LM2903DGKR over LM2903BIDGKR?
Choose LM2903DGKR when an existing design is qualified around the original LM2903 electrical limits, particularly a 36 V maximum supply rating and 1.3 us response time. Choose LM2903BIDGKR when the design benefits from the B-family improvements, including a 38 V maximum rating and faster response time. Both use the same orderable-package family, so keep the external resistor and capacitor values unchanged only after checking the selected device's complete electrical table.
Is LM2903DGKR suitable for battery voltage detection?
The LM2903DGKR is suitable for general-purpose battery threshold detection when its 2 V to 36 V supply range and -1 V to +18 V common-mode input range cover the operating conditions. According to the Texas Instruments LM2903 product information, the device offers rail-to-rail input capability and a 1.3 us response time. The open-collector output allows the detection result to drive a pull-up rail selected for the system logic.
Is LM2903DGKR the same as a dual open-collector comparator in MSOP-8?
Yes, LM2903DGKR is a dual open-collector comparator offered in an 8-pin VSSOP or MSOP-class surface-mount package. According to the Texas Instruments product page, it provides two differential comparison channels with rail-to-rail input capability. The exact pin names and exposed-pad details must still be taken from the selected manufacturer datasheet because package terminology can differ between distributors and manufacturers.

工程参考数据: LM2903DGKR ——对比、设计指导和合规信息。

选型指南

Choose LM2903DGKR for general-purpose dual threshold detection when the design uses the original LM2903 electrical limits, particularly a 36 V maximum supply rating and 1.3 us response time. It is appropriate for industrial inputs, battery supervision, sensor conditioning, and open-drain status signaling where the response requirement is measured in microseconds rather than high-speed edge detection. Choose LM2903BIDGKR when the B-family improvements matter: its documented 38 V maximum rating, 1 us response time, 0.37 mV maximum input offset, 3.5 nA input bias current, and 200 uA supply current can benefit new designs. The ROHM LM2903DGKR is a cross-manufacturer option using the same 8-MSOP/VSSOP package, but its manufacturer-specific electrical limits and qualification should be checked before substitution. In every case, verify input common-mode limits, output pull-up voltage, sink current, channel polarity, and PCB land-pattern compatibility.

与替代料对比

参数 本产品 LM2903BIDGKR LM2903DGKR
Package 8-pin VSSOP 8-pin VSSOP 8-MSOP/VSSOP
Brand Texas Instruments Texas Instruments ROHM Semiconductor
Comparator Channels 2 channels 2 channels 2 channels
Output Type Open-collector Open-collector Open-collector

关键差异点

  • Broader supply-voltage operating range than a basic 5 V comparator (对比 LM2903BIDGKR)
  • Open-collector outputs support flexible bus and pull-up configurations (对比 ROHM LM2903DGKR)
  • Dual-channel integration reduces component count (对比 ROHM LM2903DGKR)

设计说明

Place the input-network components and local supply bypass capacitor close to the LM2903DGKR pins to minimize parasitic pickup and supply bounce at the comparison threshold. Route the two differential inputs as a compact pair, keep them away from switching-node copper and relay or motor wiring, and provide a continuous ground reference. Because the part uses an 8-pin VSSOP package, verify the narrow lead pitch and exposed-pad requirements against the manufacturer land pattern before releasing artwork.

Every open-collector output requires a pull-up resistor whenever a valid high state is required. Select the pull-up from the intended logic voltage, the output's allowable sink current, and the required rise time rather than from a generic value. Keep the pull-up return current within the comparator's output limits, and account for the pull-up current when evaluating total system power. Do not apply voltages above the documented 36 V maximum for this ordering code.

Avoid comparing signals that can exceed the -1 V to +18 V common-mode input range, even when the supply itself remains within limits. Input protection structures can inject current or experience damage outside the specified range. Add hysteresis when noise or slow signal transitions could cause output chatter, and use the B-family option only after reviewing its updated electrical table if a higher maximum rating or faster response time is required.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance status was not stated in the available manufacturer and distributor information. Automotive qualification is not asserted because no AEC-Q100 status was identified for this ordering code.

数据核验日期: 2026-11-17 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

lm2903dgkr datasheet LM2903DGKR pinout LM2903DGKR datasheet pdf LM2903DGKR equivalent LM2903DGKR replacement LM2903DGKR cross reference LM2903DGKR vs LM2903BIDGKR LM2903DGKR VSSOP-8 LM2903DGKR open collector comparator LM2903DGKR voltage range LM2903DGKR price LM2903DGKR stock Texas Instruments LM2903DGKR LM2903DGKR battery voltage detection

相关元器件 & 术语

Texas Instruments LM2903DGKR LM2903BIDGKR ROHM Semiconductor LM2903 LM2903B dual differential comparator voltage comparator linear IC integrated circuit semiconductor open-collector output rail-to-rail input common-mode voltage VSSOP-8 MSOP-8 surface-mount package industrial control battery monitoring sensor signal conditioning open-drain interface power supply rejection input offset voltage response time
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情