LM2904LVIDGKR - Dual 5.5V 1MHz Op Amp | Texas Instruments
料号: LM2904LVIDGKR ✓ 量产中LM2904LVIDGKR 概述
An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. Within the broader hierarchy, the LM2904LV is a voltage-feedback operational amplifier, which places it in the amplifier IC and analog signal-conditioning categories. Two independent channels allow one package to implement two amplifiers, reducing component count and simplifying board layout in designs such as sensor conditioning, active filtering, and low-frequency instrumentation.
Key features include the dual-channel configuration, 1 MHz gain-bandwidth product, 3 mV input offset voltage rating, and a maximum 5.5 V supply voltage. The low-voltage LM2904LV family is intended for portable and low-voltage systems where the conventional 26 V LM2904 would be excessive. Its general-purpose positioning also makes it useful as a cost-conscious alternative to higher-performance precision amplifiers when the signal bandwidth and offset requirements are moderate.
The device uses a conventional complementary-input architecture suitable for closed-loop voltage feedback. Because its unity-gain bandwidth is 1 MHz, applications are generally limited to low-frequency amplification and filtering rather than high-speed signal chains. Input and output stability depends on the surrounding feedback network, source impedance, load, and bypass capacitance, so the manufacturer datasheet should be used when selecting compensation and decoupling values.
Typical uses include sensor-amplifier front ends, transducer signal conditioning, active low-pass filters, audio preamplifier stages, buffer stages, and general dual-amplifier analog boards. The low-voltage supply range makes the device appropriate for 3.3 V and 5 V systems, although rail-to-rail input and output capability is not implied by the 5.5 V maximum supply specification.
The primary design consideration is supply headroom. Common-mode input voltage, output swing, and output-current capability all depend on the selected supply voltage and load. Verify those limits against the application before committing to the VSSOP footprint. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer datasheet rather than left floating.
This page consolidates the device specifications, ordering information, package details, application guidance, and engineering trade-offs into one reference for component selection and PCB design.
直接替换替代料: LM2904LVIDGKR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LM2904LVIDGKR (相同外形与封装尺寸) ——差异在于 Input Offset Voltage.
LM2904LVQDGKRQ1
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LM2904LVDGKR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LM2904LVIPGKR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LM2904LVIDGKR 最大额定值与电气特性
| Amplifier Type | Dual operational amplifier |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 5.5 V |
| Minimum Supply Voltage | 2.7 V |
| Gain-Bandwidth Product | 1 MHz |
| Input Offset Voltage | 3 mV maximum |
| Number of Inputs | 4 inputs |
| 输出数量 | 2 outputs |
| Supply Type | Single or dual supply |
| 工作温度范围 | -40 C to +125 C |
| Package Type | VSSOP (DGK), 8 pins |
| 安装类型 | Surface mount |
| Supplier Device Package | 8-VSSOP |
| Product Category | Operational amplifier |
LM2904LVIDGKR 8-vssop 引脚配置指南
LM2904LVIDGKR(8-vssop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: LM2904LVIDGKR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LM2904LVIDGKR 适用于 6 应用s: Low-Voltage Sensor Signal Conditioning, Active Low-Pass Filtering, Audio Preamplifier Stage, General-Purpose Voltage Buffering, Industrial Control-Signal Amplification, Portable Measurement and Test Equipment.
Low-Voltage Sensor Signal Conditioning
The LM2904LVIDGKR suits low-frequency sensor front ends that operate from a 3.3 V or 5 V rail. Its two channels can amplify a sensor output and buffer the result without requiring two separate packages. The 1 MHz gain-bandwidth product is adequate for resistive sensors, thermistors, and slow analog measurement signals, while the 3 mV maximum input offset defines the practical accuracy limit for small-signal amplification. Because the amplifier is not specified as rail-to-rail, verify the sensor's common-mode voltage against the device input range and add gain if the signal level is too small.
推荐
Active Low-Pass Filtering
The LM2904LVIDGKR can implement first- and second-order active filters in low-voltage instrumentation. Two channels allow a dual-amplifier topology such as an inverting Sallen-Key stage, and the 1 MHz bandwidth provides margin for closed-loop gains that keep the signal well below that frequency. Component tolerances around the resistors and capacitors determine the actual cutoff accuracy. Check the closed-loop stability and noise-gain limits in the manufacturer datasheet, especially for high-Q sections and capacitive sensor loads.
推荐
Audio Preamplifier Stage
The LM2904LVIDGKR can serve as a general-purpose audio preamplifier in compact 3.3 V or 5 V systems. Its 1 MHz gain-bandwidth product handles audio-band signals with adequate loop gain, and the dual configuration allows one channel to amplify while the other provides inversion, buffering, or an auxiliary gain stage. The specified 3 mV input offset may create a small DC offset in high-gain microphone stages, so include an output coupling or DC-servo arrangement where required. Confirm output-current capability before driving a low-impedance headphone load.
推荐
General-Purpose Voltage Buffering
The LM2904LVIDGKR is useful for buffering high-impedance sources into downstream ADC or control circuitry. Configuring one channel as a voltage follower provides isolation without changing the signal level, while the second channel remains available for another conditioning function. The 1 MHz bandwidth is more than adequate for slow analog sources, but the device should not be assumed to provide rail-to-rail input or output swing. Check headroom at the chosen supply voltage and use the second channel for gain or active filtering when the source requires it.
推荐
Industrial Control-Signal Amplification
The LM2904LVIDGKR can amplify differential control signals in 3.3 V and 5 V industrial interface circuits. Its -40 C to +125 C rated temperature range supports applications across industrial environments, and the two channels allow one amplifier to condition a command signal while the other handles feedback or an auxiliary monitoring path. Use the exact electrical limits from the manufacturer datasheet to confirm common-mode range, output swing, and output-current capability for the connected loads.
推荐
Portable Measurement and Test Equipment
The LM2904LVIDGKR fits compact, battery-powered measurement equipment where two low-voltage analog channels are needed within a small board area. It can provide channel gain, impedance conversion, and simple filtering for resistive probes or low-level sensors. The 2.7 V to 5.5 V operating range supports 3.3 V portable systems, while the 8-pin VSSOP package conserves board space. Confirm quiescent current in the manufacturer datasheet when battery life is critical, and validate offset error against the smallest signal the instrument must resolve.
推荐
推荐产品汇总
工程参考数据: LM2904LVIDGKR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LM2904LV | LM2904LVDGKR | LM2904LVIPGKR |
|---|---|---|---|---|
| Package | VSSOP-8 (DGK) | VSSOP-8 (DGK) | VSSOP-8 (DGK) | VSSOP-8 (DGK) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Number of Channels | 2 | 2 | 2 | 2 |
| Maximum Supply Voltage | 5.5 V | 5.5 V | 5.5 V | 5.5 V |
| Minimum Supply Voltage | 2.7 V | 2.7 V | 2.7 V | 2.7 V |
| Gain-Bandwidth Product | 1 MHz | 1 MHz | 1 MHz | 1 MHz |
| Input Offset Voltage | 3 mV maximum | 3 mV maximum | 3 mV maximum | 3 mV maximum |
| Operating Temperature Range | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
关键差异点
- Low-voltage operation matched to 3.3 V and 5 V systems (对比 LM2904)
- Higher specified gain-bandwidth product within the low-voltage family (对比 LM2904)
- Compact dual amplifier in an 8-pin VSSOP (对比 LM2904LV)
设计说明
Confirm the full supply range of the analog signal path before selecting this amplifier. The device is intended for 2.7 V to 5.5 V operation, so it suits 3.3 V and 5 V rails but not unregulated batteries that can exceed 5.5 V. Place the supply bypass capacitor close to the amplifier's power pins, keep the return path short, and verify common-mode input voltage and output swing at the actual rail voltage rather than assuming rail-to-rail behavior.
Treat the two amplifier channels as separate analog paths even though they share one package. Route each feedback loop compactly to minimize parasitic pickup, avoid routing between the high-impedance input pins and the power pins, and place the bypass capacitor close to the package. For the 8-pin VSSOP, use the land pattern and pin numbering from the manufacturer datasheet rather than a generic SOIC drawing.
Do not substitute the standard 26 V LM2904 specification for the LM2904LV electrical limits. Although the devices belong to the same general-purpose family, the LV version has a 5.5 V maximum supply and a 1 MHz bandwidth rating rather than the 700 kHz rating listed for the standard LM2904. Also verify that the signal stays within the common-mode range, because the low-voltage part is not identified as a rail-to-rail amplifier.
合规信息
No explicit compliance declarations were identified for the exact LM2904LVIDGKR ordering code. Check the manufacturer product page and current material-declaration records before using these fields as purchasing criteria.