Texas Instruments

LM2904LVIDGKR - Dual 5.5V 1MHz Op Amp | Texas Instruments

MPN: LM2904LVIDGKR ✓ نشط
5.5 V Vdss VSSOP (DGK), 8 pins Package
الحد الأدنى للطلب: 1 |

LM2904LVIDGKR نظرة عامة

The Texas Instruments LM2904LVIDGKR is a dual, low-voltage operational amplifier designed for single-supply or dual-supply industrial and instrumentation circuits. It provides two amplifier channels, a 1 MHz gain-bandwidth product, a 3 mV maximum input offset voltage, and operation from a single 2.7 V to 5.5 V supply in an 8-pin VSSOP (DGK) package. The part is intended for general-purpose signal conditioning where low supply voltage, modest bandwidth, and short-circuit tolerance are more important than high-speed performance.

An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. Within the broader hierarchy, the LM2904LV is a voltage-feedback operational amplifier, which places it in the amplifier IC and analog signal-conditioning categories. Two independent channels allow one package to implement two amplifiers, reducing component count and simplifying board layout in designs such as sensor conditioning, active filtering, and low-frequency instrumentation.

Key features include the dual-channel configuration, 1 MHz gain-bandwidth product, 3 mV input offset voltage rating, and a maximum 5.5 V supply voltage. The low-voltage LM2904LV family is intended for portable and low-voltage systems where the conventional 26 V LM2904 would be excessive. Its general-purpose positioning also makes it useful as a cost-conscious alternative to higher-performance precision amplifiers when the signal bandwidth and offset requirements are moderate.

The device uses a conventional complementary-input architecture suitable for closed-loop voltage feedback. Because its unity-gain bandwidth is 1 MHz, applications are generally limited to low-frequency amplification and filtering rather than high-speed signal chains. Input and output stability depends on the surrounding feedback network, source impedance, load, and bypass capacitance, so the manufacturer datasheet should be used when selecting compensation and decoupling values.

Typical uses include sensor-amplifier front ends, transducer signal conditioning, active low-pass filters, audio preamplifier stages, buffer stages, and general dual-amplifier analog boards. The low-voltage supply range makes the device appropriate for 3.3 V and 5 V systems, although rail-to-rail input and output capability is not implied by the 5.5 V maximum supply specification.

The primary design consideration is supply headroom. Common-mode input voltage, output swing, and output-current capability all depend on the selected supply voltage and load. Verify those limits against the application before committing to the VSSOP footprint. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer datasheet rather than left floating.

This page consolidates the device specifications, ordering information, package details, application guidance, and engineering trade-offs into one reference for component selection and PCB design.

بدائل مباشرة لـ LM2904LVIDGKR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع LM2904LVIDGKR (نفس عامل الشكل والبصمة) — يختلف في Input Offset Voltage.

Texas Instruments
Input Offset Voltage: 3 mV
قارن مع LM2904LVIDGKR →

LM2904LVQDGKRQ1

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Texas Instruments
📦 VSSOP-8 (DGK)
Dual operational amplifier · 2 circuits · 2.7 V to 5.5 V · 5.5 V · 1 MHz · 3 mV · AEC-Q100 automotive-grade device · 8-VSSOP

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2904LVDGKR

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 VSSOP-8 (DGK)
Same 5.5 V low-voltage dual-amplifier family and DGK footprint; the V versus I order-code character indicates a different grade or configuration that must be confirmed against the manufacturer datasheet

📋 بديل مرجعي (غير موجود في الكتالوج)

LM2904LVIPGKR

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 VSSOP-8 (DGK)
Same LM2904LV low-voltage dual-amplifier family and DGK package; the I-grade suffix targets the same -40 C to +125 C operating range, while exact offset and qualification options require confirmation

📋 بديل مرجعي (غير موجود في الكتالوج)

LM2904LVIDGKR الحدود القصوى والخصائص الكهربائية

Amplifier Type Dual operational amplifier
Number of Channels 2 channels
Maximum Supply Voltage 5.5 V
Minimum Supply Voltage 2.7 V
Gain-Bandwidth Product 1 MHz
Input Offset Voltage 3 mV maximum
Number of Inputs 4 inputs
عدد المخارج 2 outputs
Supply Type Single or dual supply
نطاق درجة حرارة التشغيل -40 C to +125 C
Package Type VSSOP (DGK), 8 pins
نوع التركيب Surface mount
Supplier Device Package 8-VSSOP
Product Category Operational amplifier

دليل تكوين أطراف LM2904LVIDGKR 8-vssop

تكوين الأطراف لـ LM2904LVIDGKR (حزمة 8-vssop). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 8-vssop لـ LM2904LVIDGKR

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LM2904LVIDGKR.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

LM2904LVIDGKR مناسب لـ 6 التطبيقs: Low-Voltage Sensor Signal Conditioning, Active Low-Pass Filtering, Audio Preamplifier Stage, General-Purpose Voltage Buffering, Industrial Control-Signal Amplification, Portable Measurement and Test Equipment.

🌡️

Low-Voltage Sensor Signal Conditioning

The LM2904LVIDGKR suits low-frequency sensor front ends that operate from a 3.3 V or 5 V rail. Its two channels can amplify a sensor output and buffer the result without requiring two separate packages. The 1 MHz gain-bandwidth product is adequate for resistive sensors, thermistors, and slow analog measurement signals, while the 3 mV maximum input offset defines the practical accuracy limit for small-signal amplification. Because the amplifier is not specified as rail-to-rail, verify the sensor's common-mode voltage against the device input range and add gain if the signal level is too small.

🎛️

Active Low-Pass Filtering

The LM2904LVIDGKR can implement first- and second-order active filters in low-voltage instrumentation. Two channels allow a dual-amplifier topology such as an inverting Sallen-Key stage, and the 1 MHz bandwidth provides margin for closed-loop gains that keep the signal well below that frequency. Component tolerances around the resistors and capacitors determine the actual cutoff accuracy. Check the closed-loop stability and noise-gain limits in the manufacturer datasheet, especially for high-Q sections and capacitive sensor loads.

🎧

Audio Preamplifier Stage

The LM2904LVIDGKR can serve as a general-purpose audio preamplifier in compact 3.3 V or 5 V systems. Its 1 MHz gain-bandwidth product handles audio-band signals with adequate loop gain, and the dual configuration allows one channel to amplify while the other provides inversion, buffering, or an auxiliary gain stage. The specified 3 mV input offset may create a small DC offset in high-gain microphone stages, so include an output coupling or DC-servo arrangement where required. Confirm output-current capability before driving a low-impedance headphone load.

🔧

General-Purpose Voltage Buffering

The LM2904LVIDGKR is useful for buffering high-impedance sources into downstream ADC or control circuitry. Configuring one channel as a voltage follower provides isolation without changing the signal level, while the second channel remains available for another conditioning function. The 1 MHz bandwidth is more than adequate for slow analog sources, but the device should not be assumed to provide rail-to-rail input or output swing. Check headroom at the chosen supply voltage and use the second channel for gain or active filtering when the source requires it.

🏭

Industrial Control-Signal Amplification

The LM2904LVIDGKR can amplify differential control signals in 3.3 V and 5 V industrial interface circuits. Its -40 C to +125 C rated temperature range supports applications across industrial environments, and the two channels allow one amplifier to condition a command signal while the other handles feedback or an auxiliary monitoring path. Use the exact electrical limits from the manufacturer datasheet to confirm common-mode range, output swing, and output-current capability for the connected loads.

🔋

Portable Measurement and Test Equipment

The LM2904LVIDGKR fits compact, battery-powered measurement equipment where two low-voltage analog channels are needed within a small board area. It can provide channel gain, impedance conversion, and simple filtering for resistive probes or low-level sensors. The 2.7 V to 5.5 V operating range supports 3.3 V portable systems, while the 8-pin VSSOP package conserves board space. Confirm quiescent current in the manufacturer datasheet when battery life is critical, and validate offset error against the smallest signal the instrument must resolve.

ملخص المنتجات الموصى بها

LM2904LV Same low-voltage dual-amplifier family يُستخدم في: Low-Voltage Sensor Signal Conditioning, Active Low-Pass Filtering, Audio Preamplifier Stage, General-Purpose Voltage Buffering, Industrial Control-Signal Amplification, Portable Measurement and Test Equipment LM2904LVDGKR Related DGK package order variant يُستخدم في: Low-Voltage Sensor Signal Conditioning, Audio Preamplifier Stage, Industrial Control-Signal Amplification LM2904LVIDGKR Texas Instruments يُستخدم في: Active Low-Pass Filtering, General-Purpose Voltage Buffering, Portable Measurement and Test Equipment
What is the operating voltage of LM2904LVIDGKR?
The LM2904LVIDGKR operates from 2.7 V to 5.5 V, allowing it to work from 3.3 V or 5 V rails. According to the Texas Instruments LM2904LV product information, it is a dual operational amplifier specified for low-voltage systems. The 5.5 V maximum also means the device should not be placed in a circuit where the rail can exceed that limit. Input common-mode and output-swing limits must be checked against the selected supply voltage.
What is the gain-bandwidth product of the LM2904LVIDGKR?
The LM2904LVIDGKR has a 1 MHz gain-bandwidth product for each amplifier channel. Texas Instruments lists the device as a dual, 1-MHz, 5.5-V operational amplifier. This bandwidth supports low-frequency instrumentation, active filters, buffering, and general signal conditioning. It is not intended for high-speed video, RF, or wideband data-acquisition amplification where a multi-megahertz or faster amplifier is normally required.
What is the input offset voltage of LM2904LVIDGKR?
The LM2904LVIDGKR has a maximum input offset voltage of 3 mV, as stated in the Texas Instruments product description. That value indicates the differential voltage that can appear between the amplifier inputs when the output is driven to its reference level. It is acceptable for general-purpose conditioning but may require calibration when amplifying very small sensor outputs or when absolute accuracy is more important than circuit simplicity.
What package does LM2904LVIDGKR use?
The LM2904LVIDGKR is offered in an 8-pin VSSOP package identified as DGK. The Texas Instruments part-details listing specifies 8 pins, a VSSOP package, and the LM2904LVIDGKR ordering code. The DGK suffix also indicates the tape-and-reel shipping configuration used by the distributor listing. Because VSSOP is a surface-mount package, PCB layout should follow the land pattern and pin numbering shown in the manufacturer datasheet.
Where can I download the LM2904LVIDGKR datasheet PDF?
The manufacturer datasheet is available through the Texas Instruments LM2904LV product-details page, which links the LM2904LVIDGKR ordering information and documentation. Use that document for the complete pin description, recommended operating conditions, electrical characteristics, and application guidance. Search the page for the LM2904LV datasheet rather than the standard LM2904 document, because the LV family has a lower maximum supply voltage and different electrical limits.
Where can I find the LM2904LVIDGKR pinout?
The LM2904LVIDGKR pinout is defined in the pin-configuration section of the Texas Instruments LM2904LV manufacturer datasheet. The device is an 8-pin VSSOP with two complete operational-amplifier channels, so the drawing identifies the supply pins, ground pins, each channel's inverting and non-inverting inputs, and each channel's output. Assign PCB nets directly from that drawing rather than relying on a generic dual-op-amp diagram, since package drawings can vary between device families.
Is the LM2904LVIDGKR suitable for 3.3 V and 5 V systems?
Yes, the LM2904LVIDGKR is suitable for 3.3 V and 5 V systems because its specified operating range is 2.7 V to 5.5 V. Its low-voltage rating makes it a better match for these rails than a conventional high-voltage 26 V LM2904. Confirm that the signal's common-mode range and required output swing remain inside the amplifier's limits at the chosen supply voltage, especially near the lower rail.
What can replace the LM2904LVIDGKR?
The closest same-family replacements are the other 5.5 V, 1-MHz LM2904LV order variants that use the same 8-pin VSSOP arrangement, while broader equivalents may come from other manufacturers after pinout and electrical verification. The Texas Instruments LM2904 family documentation describes LM2904LV and related variants as related industry-standard amplifier options. A valid replacement must match the DGK footprint, pin functions, supply range, offset rating, and required stability configuration.
Is the LM2904LVIDGKR the same as the standard LM2904?
No, the LM2904LVIDGKR is the low-voltage LM2904LV variant, not the standard 26 V LM2904. The standard LM2904 is listed by Texas Instruments as a dual, 26-V, 700-kHz operational amplifier, while the LM2904LVIDGKR is a dual, 5.5-V, 1-MHz device. Their general-purpose architectures are related, but the maximum supply voltage, bandwidth rating, and device-specific electrical limits differ.
LM2904LVIDGKR vs LM2904LV - which should I choose?
Choose the fully specified LM2904LVIDGKR when you need the exact 5.5 V maximum supply, 1 MHz bandwidth, 3 mV offset, 8-pin VSSOP configuration, and -40 C to +125 C temperature range. Use the broader LM2904LV family designation when comparing several available order variants. The exact suffix must be checked because package, temperature grade, and ordering configuration can vary even within one amplifier family.
When should I choose the LM2904LVIDGKR instead of a precision amplifier?
Choose the LM2904LVIDGKR when the circuit needs a general-purpose dual amplifier, a supply below 5.5 V, and moderate bandwidth rather than microvolt-level accuracy. Its 1 MHz gain-bandwidth product and 3 mV maximum input offset suit low-frequency conditioning, filtering, and buffering. Select a precision amplifier instead when offset drift, bias current, low-noise performance, or rail-to-rail operation dominates the application.
Is there a Renesas equivalent for LM2904LVIDGKR?
A Renesas candidate is only a valid substitute if it reproduces the 8-pin VSSOP footprint, dual-amplifier pin functions, 2.7 V to 5.5 V supply range, and approximately 1 MHz bandwidth. Cross-reference listings for the LM2904 identify several compatible or possible analogue products from manufacturers including Renesas and Analog Devices, but those entries must be matched to the specific VSSOP order code before use. Request a device-specific cross-reference for the exact DGK package before replacing the part.
What are the key specifications of LM2904LVIDGKR that engineers should know?
The LM2904LVIDGKR combines two operational-amplifier channels, a 2.7 V to 5.5 V operating range, 1 MHz gain-bandwidth product, and 3 mV maximum input offset voltage. It is packaged as an 8-pin VSSOP and rated for -40 C to +125 C operation. Texas Instruments identifies it as an industry-standard, low-voltage dual operational amplifier intended for general-purpose analog signal-conditioning applications.
How much current can the LM2904LVIDGKR output drive?
The exact output-current capability must be taken from the output-current specification and load-current curves in the Texas Instruments LM2904LV datasheet. The available ordering information confirms the dual low-voltage amplifier configuration but does not state a load-current rating for this order code. Verify both the continuous output-current limit and the capacitive-load stability guidance before using the device with low-impedance or highly capacitive loads.
How do I request a quote and lead time for LM2904LVIDGKR?
Use the Request a Quote form on this page to request current pricing, stock, minimum order quantity, and production lead time for LM2904LVIDGKR. The distributor listings confirm that the exact DGK ordering code is catalogued, but individual commercial terms change over time. Include your target quantity, shipping destination, and required date so the order can be evaluated against current channel availability.

بيانات مرجعية هندسية لـ LM2904LVIDGKR — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the LM2904LVIDGKR when the design uses a 2.7 V to 5.5 V rail, needs two general-purpose amplifier channels, and handles signals well below the 1 MHz gain-bandwidth limit. It is a practical fit for sensor conditioning, buffering, active filtering, and low-frequency industrial interfaces where cost and simplicity matter more than microvolt-level precision. Use a precision amplifier when offset drift, noise, bias current, or rail-to-rail operation is critical. Select the standard LM2904 only when a circuit genuinely requires its higher 26 V supply capability. When evaluating LM2904LV, LM2904LVDGKR, or LM2904LVIPGKR, compare the exact suffix, package, temperature grade, and offset rating rather than treating every family member as electrically identical.

المقارنة مع البدائل

المعامل هذا المنتج LM2904LV LM2904LVDGKR LM2904LVIPGKR
Package VSSOP-8 (DGK) VSSOP-8 (DGK) VSSOP-8 (DGK) VSSOP-8 (DGK)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of Channels 2 2 2 2
Maximum Supply Voltage 5.5 V 5.5 V 5.5 V 5.5 V
Minimum Supply Voltage 2.7 V 2.7 V 2.7 V 2.7 V
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz 1 MHz
Input Offset Voltage 3 mV maximum 3 mV maximum 3 mV maximum 3 mV maximum
Operating Temperature Range -40 C to +125 C -40 C to +125 C -40 C to +125 C -40 C to +125 C
Mounting Type Surface mount Surface mount Surface mount Surface mount

أبرز الفروقات

  • Low-voltage operation matched to 3.3 V and 5 V systems (مقابلLM2904)
  • Higher specified gain-bandwidth product within the low-voltage family (مقابلLM2904)
  • Compact dual amplifier in an 8-pin VSSOP (مقابلLM2904LV)

ملاحظات التصميم

Confirm the full supply range of the analog signal path before selecting this amplifier. The device is intended for 2.7 V to 5.5 V operation, so it suits 3.3 V and 5 V rails but not unregulated batteries that can exceed 5.5 V. Place the supply bypass capacitor close to the amplifier's power pins, keep the return path short, and verify common-mode input voltage and output swing at the actual rail voltage rather than assuming rail-to-rail behavior.

Treat the two amplifier channels as separate analog paths even though they share one package. Route each feedback loop compactly to minimize parasitic pickup, avoid routing between the high-impedance input pins and the power pins, and place the bypass capacitor close to the package. For the 8-pin VSSOP, use the land pattern and pin numbering from the manufacturer datasheet rather than a generic SOIC drawing.

Do not substitute the standard 26 V LM2904 specification for the LM2904LV electrical limits. Although the devices belong to the same general-purpose family, the LV version has a 5.5 V maximum supply and a 1 MHz bandwidth rating rather than the 700 kHz rating listed for the standard LM2904. Also verify that the signal stays within the common-mode range, because the low-voltage part is not identified as a rail-to-rail amplifier.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No explicit compliance declarations were identified for the exact LM2904LVIDGKR ordering code. Check the manufacturer product page and current material-declaration records before using these fields as purchasing criteria.

عمليات بحث ذات صلة

LM2904LVIDGKR datasheet LM2904LVIDGKR pinout LM2904LVIDGKR specifications LM2904LVIDGKR operating voltage LM2904LVIDGKR 5.5V 1MHz LM2904LVIDGKR VSSOP-8 LM2904LVIDGKR equivalent LM2904LVIDGKR replacement LM2904LVIDGKR vs LM2904LV Texas Instruments LM2904LVIDGKR LM2904LVIDGKR price LM2904LVIDGKR stock LM2904LVIDGKR sensor amplifier LM2904LVIDGKR audio preamplifier LM2904LVIDGKR active filter

المكونات والمصطلحات ذات الصلة

Texas Instruments LM2904LVIDGKR LM2904LV LM2904LVDGKR LM2904LVIPGKR LM2904 operational amplifier dual operational amplifier voltage-feedback amplifier analog integrated circuit signal conditioning active filter voltage buffer audio preamplifier sensor amplifier gain-bandwidth product input offset voltage common-mode input voltage VSSOP-8 DGK package surface-mount package single-supply operation dual-supply operation
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر