STMicroelectronics

LM358APT - Dual Low-Power Op Amp in 8-TSSOP | STMicroelectronics

料号: LM358APT ✓ 量产中
8-TSSOP Package
最小起订量: 1 |

LM358APT 概述

The STMicroelectronics LM358APT is a dual, general-purpose operational amplifier packaged in an 8-TSSOP. It contains two independent, internally compensated amplifiers with a common power supply, making it suitable for signal conditioning, sensing, buffering, and control applications. The distributor catalog identifies the LM358APT as a standard general-purpose amplifier with two amplifier circuits in an 8-TSSOP surface-mount package.

An operational amplifier is an analog building block that amplifies the difference between two input voltages. The LM358 combines two such amplifier channels in one compact package, reducing component count and simplifying PCB routing. In a dual amplifier, one channel can perform signal conditioning while the other provides feedback, filtering, or an independent control function. Its low-power biasing makes it appropriate for battery-operated and embedded systems where each active circuit consumes power continuously.

The principal benefits of the LM358APT are integration, low power consumption, and flexible single- or dual-supply operation. Two amplifiers in one package conserve board area and can reduce the number of external ICs required for comparison, conditioning, and current-feedback applications. Because both channels share the same supply pins, the circuit designer can also establish common rail and ground references throughout the analog section of the board.

The LM358 architecture is widely used in general-purpose analog designs because each channel provides high open-loop voltage gain, differential input capability, and internal frequency compensation. These characteristics simplify closed-loop amplifier design without requiring an external compensation network. Engineers commonly use the device around sensor interfaces, transducers, audio preamplifier stages, and slow closed-loop control loops.

Typical uses include conditioning a bridge or resistive sensor, buffering an analog-to-digital converter input, amplifying instrumentation signals, implementing window comparators, and driving the input stage of a power-control circuit. Its internal compensation and dual-channel organization are particularly useful in compact embedded products where each additional package increases board cost and routing complexity.

PCB layout should keep input and feedback traces short, place input-biasing resistors close to the relevant pins, and route the ground connection directly to the package ground pin. Decoupling capacitors should be connected with minimal trace length. Because an operational amplifier can respond to unintended feedback caused by parasitic capacitance, clean layout is often more important than adding large external capacitors to compensate for poor routing.

This page combines the LM358APT catalog identity, package information, cross-reference options, and practical PCB guidance. It also organizes pin-level information, application guidance, and design cautions so engineers can evaluate the part quickly before starting a board layout or prototype build.

直接替换替代料: LM358APT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LM358APT (相同外形与封装尺寸) ——差异在于 Amplifier Type, Package.

STMicroelectronics
Amplifier Type: Low-power dual operational amplifier
Package: 8-pin TSSOP
对比 LM358APT →
Texas Instruments
Amplifier Type: Single-channel precision operational amplifier
Package: 8-pin SOIC
对比 LM358APT →

OPA2192IP

✅ 直接替换
📦 8-TSSOP
Rail-to-rail input and output stages replace the LM358APT's conventional input and output behavior; supply range and bias current differ while the 8-pin dual-amplifier arrangement is retained

📋 参考替代料(不在目录中)

OPA277UA

✅ 直接替换
Texas Instruments
📦 8-TSSOP
Single-channel precision operational amplifier · Single-ended output · Bipolar · ±2 V to ±18 V · 36 V · 10 uV maximum · 0.1 uV/°C maximum · Improved relative to the OP-177 reference device

联系询价

查看数据手册 →

TLV9002IPWR

✅ 直接替换
📦 8-TSSOP
Rail-to-rail operation and lower supply-voltage capability replace the LM358APT's conventional behavior; the 8-pin dual-amplifier footprint is retained

📋 参考替代料(不在目录中)

MCP6001-I/SS

✅ 直接替换
📦 8-TSSOP
Lower-voltage, rail-to-rail operation replaces the LM358APT's conventional input and output characteristics while retaining the 8-pin dual-amplifier arrangement

📋 参考替代料(不在目录中)

TLV2462IPWR

✅ 直接替换
📦 8-TSSOP
The TLV2462 operates from a lower supply range than the LM358APT and has different bandwidth and quiescent-current characteristics; the 8-pin dual-amplifier footprint is retained

📋 参考替代料(不在目录中)

RC4558PZ

✅ 直接替换
📦 8-TSSOP
The RC4558 uses the same general-purpose dual-amplifier arrangement but differs in input bias current, offset, bandwidth, and supply-current characteristics

📋 参考替代料(不在目录中)

LM358APT 最大额定值与电气特性

Amplifier Type Standard general-purpose operational amplifier
Number of Amplifier Channels 2 channels
Number of Circuits 2 circuits
封装 8-TSSOP
安装类型 Surface mount

LM358APT 引脚配置

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
引脚 1 OUT A — Amplifier A output
引脚 2 IN A- — Amplifier A inverting input
引脚 3 IN A+ — Amplifier A non-inverting input
引脚 4 V- — Negative supply connection
引脚 5 IN B+ — Amplifier B non-inverting input
引脚 6 IN B- — Amplifier B inverting input
引脚 7 OUT B — Amplifier B output
引脚 8 V+ — Positive supply connection

典型应用

LM358APT 适用于 6 应用s: Sensor Signal Conditioning, Audio Preamplifier Stages, Industrial Control and Monitoring, Battery-Powered Embedded Systems, Analog-to-Digital Converter Input Buffering, Window Comparators and Threshold Detection.

🧩

Sensor Signal Conditioning

The LM358APT is well suited to conditioning resistive, bridge, or level-sensing signals that require modest amplification and filtering. The two independent channels allow one stage to amplify a sensor output while the other provides feedback, buffering, or active filtering. Because the device is specified as a low-power dual general-purpose amplifier, it is appropriate for compact battery-powered instruments where continuous analog operation must balance accuracy against energy use. Confirm that the sensor's common-mode voltage stays inside the amplifier input range and that output swing remains sufficient at the selected supply voltage.

🎧

Audio Preamplifier Stages

The LM358APT can form the input stage of a small audio preamplifier, microphone conditioner, or line-level buffer. Its internally compensated dual-amplifier architecture supports closed-loop gain settings using external resistors and permits one channel to amplify while the other drives a volume-control or monitoring path. Low-power biasing is useful in portable speakers, headphone accessories, and compact consumer audio products. The design must still verify input noise, output drive capability, output swing, and stability for the connected load and cable capacitance.

🏭

Industrial Control and Monitoring

The LM358APT is useful in industrial control boards for amplifying sensor outputs, implementing analog alarms, and driving comparator or supervisory inputs. Two channels can be allocated to independent loops, reducing the number of amplifier packages and simplifying shared grounding around an analog controller. The low-power operation is beneficial in continuously powered monitoring equipment. For designs exposed to large transients or long sensor wiring, add appropriate input protection and verify the amplifier's common-mode range, output swing, noise immunity, and stability margin.

🔋

Battery-Powered Embedded Systems

A low-power dual operational amplifier fits battery-operated data-acquisition, environmental monitoring, and portable instrumentation designs where two analog channels are required on a constrained board area. The LM358APT consolidates two amplifiers into one 8-TSSOP package, reducing component count and keeping the analog routing compact. Its internal compensation avoids external compensation networks in conventional closed-loop configurations. Specify the operating duty cycle, acceptable quiescent current, and off-state behavior, then confirm the required supply range and common-mode limits in the manufacturer datasheet.

🖥️

Analog-to-Digital Converter Input Buffering

The LM358APT can buffer an analog source before it reaches an ADC input, reducing loading of the source and providing an additional gain or filtering stage. One channel may drive the ADC while the other provides active filtering or a reference-buffer function. This arrangement is common in slow industrial digitization systems, panel controllers, and sensor-interface boards. Verify that the amplifier's output can reach the ADC's input range, that settling is fast enough for the sampling rate, and that the chosen gain does not amplify offset or noise beyond the measurement budget.

📏

Window Comparators and Threshold Detection

Two LM358APT channels can implement independent window-comparator functions or a dual-threshold detector around a control or monitoring system. Each amplifier compares its non-inverting input with a divided reference at its inverting input, and the two outputs can drive a microcontroller or logic interface. The dual arrangement reduces package count compared with two separate single amplifiers. Because this device is a general-purpose amplifier rather than a dedicated comparator, propagation delay and output-transition behavior under overdrive must be checked against the system timing requirements.

推荐产品汇总

OPA2192IP Rail-to-rail dual amplifier candidate for sensors operating near a supply rail 用于: Sensor Signal Conditioning, Audio Preamplifier Stages, Industrial Control and Monitoring, Analog-to-Digital Converter Input Buffering OPA277UA Texas Instruments 用于: Sensor Signal Conditioning, Industrial Control and Monitoring, Analog-to-Digital Converter Input Buffering TLV9002IPWR Low-voltage dual amplifier for compact audio products 用于: Audio Preamplifier Stages, Battery-Powered Embedded Systems, Window Comparators and Threshold Detection MCP6001-I/SS Low-voltage dual amplifier candidate for compact embedded analog sections 用于: Battery-Powered Embedded Systems TLV2462IPWR Low-voltage dual amplifier candidate for compact threshold-detection circuits 用于: Window Comparators and Threshold Detection
What is the LM358APT?
The LM358APT is a dual, standard general-purpose operational amplifier from STMicroelectronics in an 8-TSSOP package. It provides two internally compensated amplifier channels sharing a common power supply. According to the STMicroelectronics distributor catalog listing for LM358APT, the device is categorized as a two-circuit, eight-pin TSSOP amplifier, making it suitable for embedded analog signal-conditioning, buffering, sensing, and control circuits.
What is the operating voltage of LM358APT?
The exact operating voltage limits for LM358APT should be taken from the STMicroelectronics LM358 datasheet before the supply rails are assigned. The distributor catalog confirms that the part is a dual general-purpose amplifier but does not state its voltage range. Use the manufacturer datasheet for the recommended supply voltage, input common-mode range, and absolute maximum ratings rather than assuming the limits of a different LM358 manufacturer.
What is the LM358APT pinout?
The LM358APT uses the standard dual operational amplifier arrangement in an 8-TSSOP: pin 1 is amplifier A output, pin 2 is amplifier A inverting input, pin 3 is amplifier A non-inverting input, pin 4 is the negative supply, pin 5 is amplifier B non-inverting input, pin 6 is amplifier B inverting input, pin 7 is amplifier B output, and pin 8 is the positive supply. The pin-description table in the manufacturer datasheet is the authoritative reference for layout.
Where can I download the LM358APT datasheet PDF?
The LM358APT datasheet PDF can be obtained from the STMicroelectronics product documentation or from the LM358APT document links shown on distributor pages. The catalog listings for LM358APT identify the part as an STMicroelectronics dual low-power operational amplifier in an 8-TSSOP. Use the manufacturer datasheet for electrical characteristics, recommended operating conditions, absolute maximum ratings, and the complete pin-description table.
How does the LM358APT differ from the LM324?
The LM358APT contains two operational amplifier channels, while the LM324 family contains four channels in a larger package. Both are general-purpose amplifier families, but they are not interchangeable because the pin count and channel allocation differ. The LM358APT is preferable where exactly two channels are needed in a compact 8-TSSOP footprint rather than four channels in a 14-pin package.
Is the LM358APT suitable for single-supply designs?
The LM358APT is commonly used in single-supply analog designs because the LM358 family supports single- or dual-supply operation, subject to the limits stated in the manufacturer datasheet. When operating from one supply, the signal must remain within the device's input common-mode range and the output must have adequate headroom at the selected operating point. Verify those conditions for the specific gain, load, and supply voltage.
What is the best drop-in replacement for LM358APT?
A drop-in replacement must match the 8-TSSOP footprint, the standard dual-op-amp pin arrangement, and the required supply and input-range characteristics. Candidate devices such as the OPA277UA, OPA2192IP, TLV9002IPWR, MCP6001-I/SS, and TLV2462IPWR are listed in the cross-reference results as pin-compatible amplifier candidates, but each has different voltage, bandwidth, noise, and common-mode specifications. Confirm every operating condition before replacing the LM358APT.
Can an OPA2192IP replace an LM358APT?
The OPA2192IP is a candidate for a design that uses the same 8-pin dual-amplifier arrangement, but it is not an electrical clone of the LM358APT. It offers rail-to-rail input and output behavior, while its bandwidth, slew rate, noise, and supply-current characteristics differ from the LM358 family. Use it when the improved rail-to-rail behavior is needed and the closed-loop gain, load, noise, and supply limits still satisfy the system requirements.
Is an OPA277UA a better choice than the LM358APT for low-noise analog signals?
The OPA277UA is a precision-oriented dual amplifier that can be preferable when low offset and low noise are more important than minimum cost. The LM358APT remains the straightforward choice for general-purpose conditioning and control. The decisive factors are the required noise density, offset accuracy, bandwidth, supply voltage, input bias current, and system calibration budget, all of which should be compared against the manufacturer datasheets.
What can replace an LM358APT in a dual-supply circuit?
An amplifier in a dual-supply design must tolerate the full negative and positive rail voltages and maintain the input common-mode range required by the circuit. Candidates such as the OPA277UA and OPA2192IP use the same 8-pin dual-amplifier arrangement, while lower-voltage candidates such as the TLV9002IPWR or TLV2462IPWR are appropriate only when their supply ratings satisfy the design. Review absolute maximum ratings, output swing, and stability before substitution.
When should I choose the LM358APT instead of a rail-to-rail amplifier?
Choose the LM358APT when a conventional general-purpose amplifier is sufficient, the circuit operates within the LM358 input common-mode range, and minimum cost or low power consumption is the priority. A rail-to-rail input amplifier is preferable when the signal can approach either supply rail, when output swing must stay close to the rails, or when the application requires precision offset and noise performance. Confirm those requirements against the target signal level and operating point.
How should I decouple the LM358APT power supply?
Place the supply-decoupling capacitor as close as possible to the LM358APT positive supply and ground pins, with the shortest possible connection to the package. A common arrangement is a local ceramic capacitor for high-frequency bypassing, supplemented by bulk capacitance where the board's power distribution requires it. Keep the ground return short and connect it to the device ground pin rather than routing it through a noisy analog signal path.
What is the LM358APT input offset and noise performance?
The exact input offset voltage, input noise density, and input bias current for LM358APT must be read from the STMicroelectronics LM358 datasheet and the relevant grade and temperature conditions. These parameters determine accuracy at low signal levels, particularly in sensor interfaces and current-sense amplifiers. When comparing the LM358APT with precision alternatives, compare guaranteed limits under the same temperature range rather than typical values.
How do I prevent oscillation in an LM358APT analog circuit?
Stable operation usually depends on keeping the feedback network compact, avoiding long feedback traces, and placing the input-biasing resistors close to the amplifier pins. Follow the stability guidance in the manufacturer datasheet, particularly for capacitive loads and non-inverting configurations. If the amplifier drives a long cable or large capacitor, add an isolation resistor at the output and verify stability with a scope and a properly terminated measurement setup.
Where can I buy LM358APT and request a quote?
Use the Request a Quote form on this page to ask for LM358APT pricing, current stock, minimum order quantity, and lead time. The component is listed in current distributor catalogs for stock and ordering, including a listing that identifies the 8-TSSOP package and two amplifier circuits. XAIPART confirms commercial availability, quantity, and delivery scheduling through its own quotation process rather than through a static price table.

工程参考数据: LM358APT ——对比、设计指导和合规信息。

选型指南

Choose the LM358APT for general-purpose analog signal conditioning, buffering, or control when a low-power dual amplifier in an 8-TSSOP is appropriate and the signal stays within the device's specified input and output ranges. Select the OPA277UA when low offset and precision-oriented performance justify a different electrical profile. Use the OPA2192IP or TLV9002IPWR when the signal must operate close to a supply rail and rail-to-rail behavior is valuable. The MCP6001-I/SS is appropriate for lower-voltage systems, while the TLV2462IPWR offers a different low-voltage bandwidth and power trade-off. The RC4558PZ provides another general-purpose dual-amplifier option. In every case, verify supply range, common-mode range, output swing, gain-bandwidth product, slew rate, noise, offset, input bias current, and capacitive-load stability before approving a substitution.

与替代料对比

参数 本产品 OPA2192IP OPA277UA TLV9002IPWR MCP6001-I/SS TLV2462IPWR RC4558PZ
Brand STMicroelectronics Texas Instruments Texas Instruments Texas Instruments Microchip Technology Texas Instruments Yageo
Package 8-TSSOP 8-TSSOP 8-TSSOP 8-TSSOP 8-TSSOP 8-TSSOP 8-TSSOP
Amplifier Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Functional Category Low-power general-purpose operational amplifier Precision rail-to-rail operational amplifier Precision operational amplifier Low-power rail-to-rail operational amplifier Low-power operational amplifier Low-power operational amplifier General-purpose operational amplifier

关键差异点

  • Two general-purpose channels in a compact 8-TSSOP (对比 OPA277UA)
  • Conventional low-power general-purpose amplifier positioning (对比 TLV9002IPWR)
  • Single package supports two independent analog functions (对比 MCP6001-I/SS)

设计说明

Place the LM358APT decoupling capacitor directly between the positive supply and ground pins, keeping the connection loop as small as practical. Route the ground return to the package ground pin without passing through the analog input area. If the amplifier drives an external connector, keep the sensitive input and feedback nets away from that trace. Good supply and return geometry reduces susceptibility to switching noise and prevents output instability that can otherwise be mistaken for an amplifier defect.

Keep the inverting-input node physically small because feedback-network components connect to it and parasitic capacitance there can alter stability and effective noise gain. Place feedback resistors close to the relevant input pins and connect non-inverting inputs through short, quiet traces. When the source is a high-impedance sensor, minimize leakage paths and consider guarding or shielding because input bias current can create an unintended voltage even in a correctly laid out circuit.

Do not treat the LM358APT as a rail-to-rail precision amplifier. Check the input common-mode range and output swing at the actual supply voltage, load current, and temperature before selecting the gain. Also verify the gain-bandwidth product and slew rate for the closed-loop gain and operating frequency. A signal that fits electrically but exceeds those limits can produce distortion, unexpected slew behavior, or oscillation during prototype testing.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The LM358APT catalog identity, dual amplifier configuration, and 8-TSSOP package are confirmed by distributor listings. Compliance declarations were not present in those listings and should be checked on the manufacturer product page for the exact ordering code.

相关搜索

lm358ap datasheet lm358ap pinout LM358APT datasheet LM358APT datasheet pdf LM358APT pinout LM358APT 8-TSSOP STMicroelectronics LM358APT LM358APT equivalent LM358APT drop-in replacement LM358APT price LM358APT stock LM358APT dual op amp LM358APT sensor signal conditioning LM358APT vs OPA2192IP

相关元器件 & 术语

STMicroelectronics LM358APT LM358 dual operational amplifier operational amplifier analog amplifier low-power amplifier general-purpose amplifier signal conditioning buffer amplifier sensor interface audio preamplifier industrial control battery-powered embedded system ADC input buffering window comparator TSSOP 8-TSSOP surface mount SMD package internal frequency compensation input common-mode range gain-bandwidth product slew rate input offset voltage quiescent current
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情