Texas Instruments

LM358LVIPWR - Dual 5.5V 1MHz Op Amp | Texas Instruments

料号: LM358LVIPWR ✓ 量产中
2.7 V to 5.5 V Vdss 8-pin TSSOP Package
最小起订量: 1 |

LM358LVIPWR 概述

Texas Instruments LM358LVIPWR is a dual, low-voltage operational amplifier with a 5.5 V maximum supply voltage, 1 MHz gain-bandwidth product, and 8-pin TSSOP package. Designed for economical signal conditioning at low supply voltages, the device provides two amplifiers in one compact surface-mount package.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the difference between its two input voltages. Op amps belong to the amplifier IC hierarchy and are widely used for buffering, signal conditioning, voltage comparison, and closed-loop control. The dual configuration provides two amplifier channels with a common power supply, making it useful where PCB area and component count are important.

The LM358LVIPWR operates from 2.7 V to 5.5 V according to the Texas Instruments LM358LV product information. Its 1 MHz gain-bandwidth product supports general-purpose low-frequency analog applications. The 8-pin TSSOP package is intended for surface-mount assembly, while the IPW ordering code identifies the tape-and-reel shipping configuration.

The LM358LV family includes the single LM321LV, dual LM358LV, and quad LM324LV operational amplifiers. This family was created as a low-voltage alternative to the established LM321, LM358, and LM324 product families. The dual LM358LV configuration offers a practical balance between channel count, package size, and analog performance for cost-sensitive equipment.

Typical uses include low-voltage sensor interfaces, smoke-detection circuits, personal electronics, appliance control, audio preamplification, and general-purpose signal conditioning. The two independent channels can process separate signals or be connected together for differential, gain, filtering, and comparator-style circuit arrangements.

Designers should account for the device's low-voltage operating range and confirm the output-voltage swing, input-common-mode range, output-current capability, stability requirements, and channel-to-channel behavior against the application. Decoupling capacitors should be placed close to the supply pins, while input and feedback components should follow the circuit topology described in the manufacturer datasheet.

This page combines the key electrical ratings, package information, comparison guidance, and practical design considerations needed to evaluate the LM358LVIPWR for low-voltage analog systems. It also provides a focused path for checking an equivalent part, requesting a quote, and confirming the correct TSSOP footprint before design release.

直接替换替代料: LM358LVIPWR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

TLV9002IPWR

✅ 直接替换
📦 8-pin TSSOP (PW)
Gain-bandwidth product remains 1 MHz, a 0% change, but the amplifier architecture differs and its electrical ratings require functional verification.

📋 参考替代料(不在目录中)

LM358LVIPWR 最大额定值与电气特性

Product Type Dual operational amplifier
Amplifier Channel Count 2 channels
Supply Voltage Range 2.7 V to 5.5 V
Maximum Supply Voltage 5.5 V
Gain-Bandwidth Product 1 MHz
Supply Configuration Single or split supply
Package Type 8-pin TSSOP
Package Code PW
Shipping Format Tape and reel
安装类型 Surface mount

LM358LVIPWR pw 引脚配置指南

LM358LVIPWR(pw 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

LM358LVIPWR 的 pw 封装引脚图

暂无详细引脚数据: LM358LVIPWR.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LM358LVIPWR 适用于 6 应用s: Low-Voltage Sensor Signal Conditioning, Smoke-Detector Signal Path, Appliance Control Module, Audio Preamplification, Battery-Powered Personal Electronics, Voltage Comparison and Control.

🧩

Low-Voltage Sensor Signal Conditioning

The LM358LVIPWR is suitable for conditioning low-frequency sensor outputs in 2.7 V to 5.5 V systems because it provides two amplifier channels, a 1 MHz gain-bandwidth product, and a compact 8-pin TSSOP package. One channel can amplify or buffer the sensor signal while the second channel supports biasing, filtering, or a reference comparison. The 1 MHz bandwidth is sufficient for many temperature, pressure, and occupancy sensors, although the input common-mode range and output swing must be checked against the actual sensor output. Place the supply bypass capacitor close to the device and route the sensor input directly to the selected amplifier pins.

🏭

Smoke-Detector Signal Path

The LM358LVIPWR fits a low-voltage smoke-detection signal path that must process a sensor-derived waveform without exceeding a 5.5 V supply. Its dual-channel configuration can support an input amplification stage and a second comparison or conditioning stage in one 8-pin TSSOP package. The 1 MHz gain-bandwidth product is more than adequate for common low-frequency sensing bandwidths, while the 2.7 V minimum operating supply supports 3.3 V system rails. Designers must verify the sensor output range, required alarm threshold, detector noise requirements, and output drive before finalizing the circuit.

⚡

Appliance Control Module

The LM358LVIPWR is appropriate for compact appliance-control electronics operating from a 3.3 V or 5 V rail. Its two amplifier channels can condition switch, level, or sensor signals while the 8-pin TSSOP package helps limit board area. The 2.7 V to 5.5 V operating range matches common appliance control architectures, and the 1 MHz gain-bandwidth product is adequate for slowly varying control signals. For motor, relay, or mains-connected products, separate the low-voltage signal path from switching noise and verify the complete circuit against the appliance's safety, surge, and environmental requirements.

🎧

Audio Preamplification

The LM358LVIPWR can serve as a low-voltage audio preamplifier in portable or personal-electronics systems using a 2.7 V to 5.5 V supply. The dual arrangement allows one channel to amplify a microphone or line-level source while the second channel handles volume control, filtering, or another audio path. Its 1 MHz gain-bandwidth product supports the midband audio frequencies commonly found in compact products. Audio performance still depends on the selected gain network, input and output impedances, source noise, supply-noise rejection, and the required output swing into the following stage.

📱

Battery-Powered Personal Electronics

The LM358LVIPWR is suitable for battery-powered personal electronics where the signal-processing rail operates between 2.7 V and 5.5 V. Its dual-channel TSSOP package consolidates two analog functions without requiring two separate amplifier packages, while the 1 MHz bandwidth supports common sensor, control, and audio conditioning tasks. Low supply voltage also constrains the available input and output range, so the sensor output and downstream ADC or comparator limits must be included in the design. Confirm the actual quiescent current, output loading, and shutdown strategy before selecting it for a battery-limited product.

🔧

Voltage Comparison and Control

The LM358LVIPWR can implement voltage comparison and proportional-control functions in equipment powered from a low-voltage rail. Each internally compensated amplifier may be configured as a comparator or as an active feedback stage, subject to the datasheet's input and output limits. The 2.7 V to 5.5 V supply range supports 3.3 V and 5 V control boards, and the 1 MHz gain-bandwidth product is appropriate for many low-frequency control loops. Use a suitable output pull-up when the amplifier operates open-loop, and verify threshold accuracy, propagation behavior, and saturation recovery for the timing involved.

推荐产品汇总

LM321LV Single-channel member of the same low-voltage family 用于: Low-Voltage Sensor Signal Conditioning, Smoke-Detector Signal Path, Appliance Control Module, Audio Preamplification, Battery-Powered Personal Electronics, Voltage Comparison and Control LM324LV Quad-channel member of the same low-voltage family 用于: Low-Voltage Sensor Signal Conditioning, Smoke-Detector Signal Path, Appliance Control Module, Audio Preamplification, Battery-Powered Personal Electronics, Voltage Comparison and Control
What is the operating voltage of LM358LVIPWR?
The LM358LVIPWR operates from 2.7 V to 5.5 V. According to the Texas Instruments LM358LV product information, the LM3xxLV family was developed for low-voltage applications in which cost and supply voltage are important design constraints. This 2.7 V to 5.5 V range makes the device suitable for 3.3 V and 5 V systems, subject to checking output swing and input common-mode limits for the specific circuit.
What are the key specifications of LM358LVIPWR that engineers should know?
The LM358LVIPWR is a dual operational amplifier with a 2.7 V to 5.5 V supply range, 1 MHz gain-bandwidth product, and 8-pin TSSOP package. According to Texas Instruments product information, it is an industry-standard low-voltage LM358LV-family device. The most important design checks are the two amplifier channels, low-voltage operating range, compact surface-mount footprint, and the requirement to confirm output swing and input common-mode limits in the intended circuit.
Where to download the LM358LVIPWR datasheet PDF?
The authoritative LM358LVIPWR datasheet is available through the Texas Instruments LM358LV product link at https://www.ti.com/lit/gpn/LM358LV. It covers the LM321LV, LM358LV, and LM324LV low-voltage operational-amplifier family, including electrical characteristics, application information, and pin assignments. Use the manufacturer document when establishing the circuit design, package drawing, test conditions, and electrical limits for production documentation.
Where can I find the LM358LVIPWR pinout?
The LM358LVIPWR pinout is documented in the Texas Instruments LM358LV datasheet under the pin configuration and package-information sections. The device uses an 8-pin TSSOP package. Before assigning PCB tracks, use the pin-description table in the manufacturer datasheet to identify each amplifier input, output, supply, and ground connection for the specific ordering code and package drawing.
Is LM358LVIPWR suitable for 3.3V and 5V applications?
Yes, the LM358LVIPWR is suitable for 3.3 V and 5 V systems because its stated supply range is 2.7 V to 5.5 V. According to the Texas Instruments LM358LV product page, the family targets cost-sensitive low-voltage applications. Confirm that the selected output voltage, input signal range, and required output swing remain inside the amplifier's operating limits at the actual supply voltage.
What is the bandwidth of LM358LVIPWR?
The LM358LVIPWR has a 1 MHz gain-bandwidth product. Mouser identifies the device as a dual, 5.5 V, 1 MHz operational amplifier, matching the Texas Instruments family description. This bandwidth is most useful for low-frequency signal conditioning rather than wideband video or high-speed data acquisition. Closed-loop bandwidth depends on the selected noise-gain and feedback network.
LM358LVIPWR vs LM358LVIDR: which one fits an existing 8-pin PCB?
The LM358LVIPWR uses an 8-pin TSSOP package, while LM358LVIDR is identified as an 8-pin SOIC package. They belong to the same Texas Instruments LM358LV family, but the physical land patterns are not interchangeable without a PCB change. Choose LM358LVIPWR for a TSSOP footprint and LM358LVIDR only when the board provides the corresponding SOIC footprint.
LM358LVIPWR vs TLV9002IPWR: which is better for low-voltage signal conditioning?
The LM358LVIPWR is the better fit when an industry-standard dual LM358LV-family response and a 2.7 V to 5.5 V supply range are the primary requirements. The TLV9002IPWR also uses an 8-pin TSSOP package and a 1 MHz gain-bandwidth product, but its amplifier architecture differs. Verify input range, output swing, offset, bias current, and stability before treating it as a functional substitute.
When should I choose LM358LVIPWR over another dual op amp?
Choose LM358LVIPWR when the design needs a dual amplifier, a 2.7 V to 5.5 V supply range, a 1 MHz gain-bandwidth product, and an 8-pin TSSOP footprint. It is particularly appropriate for cost-sensitive low-voltage equipment, sensor interfaces, and general signal-conditioning blocks. Select a different amplifier only when a specialized input rail, output swing, noise, precision, or power-consumption requirement exceeds the LM358LV feature set.
Is LM358LVIPWR suitable for smoke detectors and appliance control?
Yes, the Texas Instruments LM358LV product information identifies smoke detectors and large appliances as target applications for the LM3xxLV family. The LM358LVIPWR combines two amplifier channels with a 2.7 V to 5.5 V supply range in an 8-pin TSSOP package. Final qualification should include sensor-signal range, alarm-drive current, environmental requirements, and production-test margins for the finished appliance.
What can replace LM358LVIPWR?
The closest package-level replacement identified is the Texas Instruments TLV9002IPWR, which uses the same 8-pin TSSOP format and 1 MHz gain-bandwidth product. It is a comparison candidate rather than an automatic functional equivalent because its amplifier architecture differs. Before replacement, verify output swing, input common-mode range, offset voltage, bias current, noise, stability, and every connected pin against the original design.
Where to buy LM358LVIPWR online?
Use the Request a Quote form on this page to ask for LM358LVIPWR availability, current lead time, and order confirmation. The exact package, tape-and-reel format, and ordering code should be confirmed before quotation. A procurement request should include the Texas Instruments manufacturer name, LM358LVIPWR MPN, required quantity, and any date-code or traceability requirements needed by the production process.
What is the price of LM358LVIPWR?
Current commercial terms for LM358LVIPWR should be requested through the Request a Quote form on this page. The form can capture the required quantity, target packaging, and delivery expectations without relying on a stale price table. Include the complete MPN and the 8-pin TSSOP tape-and-reel configuration so the quotation reflects the exact production part rather than a related LM358LV ordering code.
Is LM358LVIPWR in stock, and what is its lead time?
Request current stock and lead-time confirmation through the Request a Quote form on this page. Stock status can change with volume, package format, date code, and regional fulfillment conditions. State the required quantity and production schedule in the request so the response can reflect the allocation needed for your build rather than an uncommitted general inventory indication.
What is the best cross-brand equivalent for LM358LVIPWR?
No cross-brand drop-in replacement is established here. The cross-reference material identifies LM358-family alternatives, but the cited descriptions cover different packages or call the candidates comparison parts rather than verified drop-ins. A valid cross-brand replacement must use the same 8-pin TSSOP land pattern, provide two amplifier channels, and preserve the required 2.7 V to 5.5 V operation and 1 MHz bandwidth without unacceptable electrical changes.

工程参考数据: LM358LVIPWR ——对比、设计指导和合规信息。

选型指南

Choose LM358LVIPWR for a compact, general-purpose dual amplifier operating from a 2.7 V to 5.5 V rail. It is particularly appropriate when the design needs the LM358LV family positioning, a 1 MHz gain-bandwidth product, and an 8-pin TSSOP footprint. The two channels can support separate sensor-conditioning, control, or audio functions while reducing package count. Consider TLV9002IPWR when its rail-to-rail-oriented architecture provides a defined advantage in the target signal range and all package, pin, bandwidth, stability, and output-loading requirements are verified. Do not substitute an SOIC, DIP, or VSSOP LM358-family member on a TSSOP land pattern. If the design requires rail-to-rail input operation, substantially lower offset or bias current, faster slew rate, lower noise, or a wider output range, compare those requirements against the LM358LV electrical characteristics before committing to either device.

与替代料对比

参数 本产品 TLV9002IPWR
Package 8-pin TSSOP (PW) 8-pin TSSOP (PW)
Brand Texas Instruments Texas Instruments
Amplifier Channels 2 channels 2 channels
Gain-Bandwidth Product 1 MHz 1 MHz

关键差异点

  • Combines two channels with a low-voltage supply range (对比 TLV9002IPWR)
  • Uses the established LM358LV family positioning (对比 TLV9002IPWR)
  • Matches the 1 MHz bandwidth of the compared same-package part (对比 TLV9002IPWR)

设计说明

Place the supply bypass capacitor immediately between the positive supply pin and the ground pin, with a short and low-inductance return path. Route both amplifier inputs and feedback connections away from the supply and ground current paths. Because LM358LVIPWR uses a compact 8-pin TSSOP footprint, inspect the manufacturer land pattern and maintain the associated copper, solder-mask, and paste geometry during PCB-library creation.

Design the analog rail so that the LM358LVIPWR always receives a voltage within its 2.7 V to 5.5 V operating range. Check input and output excursions at startup, shutdown, and the lowest supply condition rather than only at nominal voltage. If a downstream circuit can approach the upper supply limit, include output-swing headroom so the amplifier is not driven into saturation.

Do not assume that another 8-pin dual op amp is interchangeable even when the package drawing matches. Confirm the pin assignments, input common-mode range, output swing, offset voltage, bias current, slew rate, noise, and stability with each connected component. For TLV9002IPWR, specifically verify behavior across the same supply voltage and signal range before approving it as a functional replacement.

Use short feedback loops and keep high-impedance input nodes physically small to reduce capacitive pickup. If the circuit handles fast edges or high impedance, add protection consistent with the amplifier's input ratings and use a defined ground reference. The 1 MHz gain-bandwidth product limits useful closed-loop bandwidth as noise gain rises, so account for the complete feedback network rather than selecting gain from the open-loop bandwidth alone.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance status requires confirmation from the current manufacturer product documentation or the applicable declaration for the exact ordering code.

数据核验日期: 2026-11-09 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

LM358LVIPWR datasheet LM358LVIPWR pinout LM358LVIPWR datasheet pdf LM358LVIPWR equivalent LM358LVIPWR replacement LM358LVIPWR cross reference LM358LVIPWR vs TLV9002IPWR LM358LVIPWR price LM358LVIPWR stock Texas Instruments LM358LVIPWR LM358LVIPWR 2.7V 5.5V LM358LVIPWR 1MHz TSSOP LM358LVIPWR footprint LM358LVIPWR application circuit

相关元器件 & 术语

Texas Instruments LM358LVIPWR LM358LV LM321LV LM324LV TLV9002IPWR operational amplifier op amp dual amplifier analog integrated circuit amplifier IC semiconductor low-dropout voltage gain-bandwidth product signal conditioning voltage comparator TSSOP-8 surface-mount technology SMD package single-supply operation split-supply operation 2.7 V minimum supply 5.5 V maximum supply 1 MHz bandwidth
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情