LM358LVIPWR - Dual 5.5V 1MHz Op Amp | Texas Instruments
MPN: LM358LVIPWR ✓ فعالLM358LVIPWR نمای کلی
An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the difference between its two input voltages. Op amps belong to the amplifier IC hierarchy and are widely used for buffering, signal conditioning, voltage comparison, and closed-loop control. The dual configuration provides two amplifier channels with a common power supply, making it useful where PCB area and component count are important.
The LM358LVIPWR operates from 2.7 V to 5.5 V according to the Texas Instruments LM358LV product information. Its 1 MHz gain-bandwidth product supports general-purpose low-frequency analog applications. The 8-pin TSSOP package is intended for surface-mount assembly, while the IPW ordering code identifies the tape-and-reel shipping configuration.
The LM358LV family includes the single LM321LV, dual LM358LV, and quad LM324LV operational amplifiers. This family was created as a low-voltage alternative to the established LM321, LM358, and LM324 product families. The dual LM358LV configuration offers a practical balance between channel count, package size, and analog performance for cost-sensitive equipment.
Typical uses include low-voltage sensor interfaces, smoke-detection circuits, personal electronics, appliance control, audio preamplification, and general-purpose signal conditioning. The two independent channels can process separate signals or be connected together for differential, gain, filtering, and comparator-style circuit arrangements.
Designers should account for the device's low-voltage operating range and confirm the output-voltage swing, input-common-mode range, output-current capability, stability requirements, and channel-to-channel behavior against the application. Decoupling capacitors should be placed close to the supply pins, while input and feedback components should follow the circuit topology described in the manufacturer datasheet.
This page combines the key electrical ratings, package information, comparison guidance, and practical design considerations needed to evaluate the LM358LVIPWR for low-voltage analog systems. It also provides a focused path for checking an equivalent part, requesting a quote, and confirming the correct TSSOP footprint before design release.
جایگزینهای drop-in برای LM358LVIPWR — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
TLV9002IPWR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LM358LVIPWR حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Dual operational amplifier |
| Amplifier Channel Count | 2 channels |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Maximum Supply Voltage | 5.5 V |
| Gain-Bandwidth Product | 1 MHz |
| Supply Configuration | Single or split supply |
| Package Type | 8-pin TSSOP |
| Package Code | PW |
| Shipping Format | Tape and reel |
| نوع نصب | Surface mount |
راهنمای پیکربندی پین LM358LVIPWR pw
پیکربندی پین برای LM358LVIPWR (پکیج pw). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای LM358LVIPWR.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
LM358LVIPWR مناسب است برای 6 کاربردs: Low-Voltage Sensor Signal Conditioning, Smoke-Detector Signal Path, Appliance Control Module, Audio Preamplification, Battery-Powered Personal Electronics, Voltage Comparison and Control.
Low-Voltage Sensor Signal Conditioning
The LM358LVIPWR is suitable for conditioning low-frequency sensor outputs in 2.7 V to 5.5 V systems because it provides two amplifier channels, a 1 MHz gain-bandwidth product, and a compact 8-pin TSSOP package. One channel can amplify or buffer the sensor signal while the second channel supports biasing, filtering, or a reference comparison. The 1 MHz bandwidth is sufficient for many temperature, pressure, and occupancy sensors, although the input common-mode range and output swing must be checked against the actual sensor output. Place the supply bypass capacitor close to the device and route the sensor input directly to the selected amplifier pins.
پیشنهادی
Smoke-Detector Signal Path
The LM358LVIPWR fits a low-voltage smoke-detection signal path that must process a sensor-derived waveform without exceeding a 5.5 V supply. Its dual-channel configuration can support an input amplification stage and a second comparison or conditioning stage in one 8-pin TSSOP package. The 1 MHz gain-bandwidth product is more than adequate for common low-frequency sensing bandwidths, while the 2.7 V minimum operating supply supports 3.3 V system rails. Designers must verify the sensor output range, required alarm threshold, detector noise requirements, and output drive before finalizing the circuit.
پیشنهادی
Appliance Control Module
The LM358LVIPWR is appropriate for compact appliance-control electronics operating from a 3.3 V or 5 V rail. Its two amplifier channels can condition switch, level, or sensor signals while the 8-pin TSSOP package helps limit board area. The 2.7 V to 5.5 V operating range matches common appliance control architectures, and the 1 MHz gain-bandwidth product is adequate for slowly varying control signals. For motor, relay, or mains-connected products, separate the low-voltage signal path from switching noise and verify the complete circuit against the appliance's safety, surge, and environmental requirements.
پیشنهادی
Audio Preamplification
The LM358LVIPWR can serve as a low-voltage audio preamplifier in portable or personal-electronics systems using a 2.7 V to 5.5 V supply. The dual arrangement allows one channel to amplify a microphone or line-level source while the second channel handles volume control, filtering, or another audio path. Its 1 MHz gain-bandwidth product supports the midband audio frequencies commonly found in compact products. Audio performance still depends on the selected gain network, input and output impedances, source noise, supply-noise rejection, and the required output swing into the following stage.
پیشنهادی
Battery-Powered Personal Electronics
The LM358LVIPWR is suitable for battery-powered personal electronics where the signal-processing rail operates between 2.7 V and 5.5 V. Its dual-channel TSSOP package consolidates two analog functions without requiring two separate amplifier packages, while the 1 MHz bandwidth supports common sensor, control, and audio conditioning tasks. Low supply voltage also constrains the available input and output range, so the sensor output and downstream ADC or comparator limits must be included in the design. Confirm the actual quiescent current, output loading, and shutdown strategy before selecting it for a battery-limited product.
پیشنهادی
Voltage Comparison and Control
The LM358LVIPWR can implement voltage comparison and proportional-control functions in equipment powered from a low-voltage rail. Each internally compensated amplifier may be configured as a comparator or as an active feedback stage, subject to the datasheet's input and output limits. The 2.7 V to 5.5 V supply range supports 3.3 V and 5 V control boards, and the 1 MHz gain-bandwidth product is appropriate for many low-frequency control loops. Use a suitable output pull-up when the amplifier operates open-loop, and verify threshold accuracy, propagation behavior, and saturation recovery for the timing involved.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای LM358LVIPWR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | TLV9002IPWR |
|---|---|---|
| Package | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) |
| Brand | Texas Instruments | Texas Instruments |
| Amplifier Channels | 2 channels | 2 channels |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
تفاوتهای کلیدی
- Combines two channels with a low-voltage supply range (در مقابلTLV9002IPWR)
- Uses the established LM358LV family positioning (در مقابلTLV9002IPWR)
- Matches the 1 MHz bandwidth of the compared same-package part (در مقابلTLV9002IPWR)
یادداشتهای طراحی
Place the supply bypass capacitor immediately between the positive supply pin and the ground pin, with a short and low-inductance return path. Route both amplifier inputs and feedback connections away from the supply and ground current paths. Because LM358LVIPWR uses a compact 8-pin TSSOP footprint, inspect the manufacturer land pattern and maintain the associated copper, solder-mask, and paste geometry during PCB-library creation.
Design the analog rail so that the LM358LVIPWR always receives a voltage within its 2.7 V to 5.5 V operating range. Check input and output excursions at startup, shutdown, and the lowest supply condition rather than only at nominal voltage. If a downstream circuit can approach the upper supply limit, include output-swing headroom so the amplifier is not driven into saturation.
Do not assume that another 8-pin dual op amp is interchangeable even when the package drawing matches. Confirm the pin assignments, input common-mode range, output swing, offset voltage, bias current, slew rate, noise, and stability with each connected component. For TLV9002IPWR, specifically verify behavior across the same supply voltage and signal range before approving it as a functional replacement.
Use short feedback loops and keep high-impedance input nodes physically small to reduce capacitive pickup. If the circuit handles fast edges or high impedance, add protection consistent with the amplifier's input ratings and use a defined ground reference. The 1 MHz gain-bandwidth product limits useful closed-loop bandwidth as noise gain rises, so account for the complete feedback network rather than selecting gain from the open-loop bandwidth alone.
اطلاعات انطباق
Compliance status requires confirmation from the current manufacturer product documentation or the applicable declaration for the exact ordering code.