LPC4310FBD144 - 204MHz Dual-Core Cortex-M4/M0 | NXP
料号: LPC4310FBD144 ✓ 量产中LPC4310FBD144 概述
A dual-core microcontroller is an integrated circuit containing two independently programmable processor cores within one package. The Cortex-M4 core is optimized for compact embedded control and digital signal processing, while the Cortex-M0 core can handle lower-complexity tasks, peripheral servicing, or background operations. This architecture reduces the need for separate companion controllers when the system must coordinate deterministic control functions with higher-throughput signal processing.
Key LPC4310 features include 168 kB of SRAM, a maximum listed operating frequency of 204 MHz, CAN connectivity, AES cryptographic hardware, SPIFI support, SGPIO, and SCT. The ROMless configuration requires the application program to be stored in external nonvolatile memory, allowing firmware, code, and boot images to be upgraded independently of the microcontroller package. The 144-LQFP package also provides a large pin count for external memory, communications, and control interfaces.
The LPC4310FBD144 belongs to NXP's LPC43xx family of mixed-signal and digital signal controllers. Its Cortex-M4/M0 architecture supports concurrent software tasks, while the Cortex-M4 main core addresses applications requiring faster arithmetic and signal-processing performance. The external-memory interface and ROMless design add board-level flexibility but require careful initialization of the external memory device before the application code can execute.
Typical uses include industrial signal-processing equipment, communications controllers, motor-control platforms, data-acquisition systems, and embedded products requiring CAN plus secure serial connectivity. The microcontroller can coordinate sensors and actuators through its mixed-signal peripherals while the M0 coprocessor supports low-latency peripheral servicing. Its 204 MHz Cortex-M4 core is particularly useful for filtering, control-loop execution, and protocol processing.
Designers should allocate the external memory interface according to the NXP pin description and memory-device timing requirements, and should isolate high-speed communications and switching nodes to prevent unwanted coupling. Firmware must provide the boot and configuration sequence required for ROMless operation. Decoupling, grounding, signal integrity, and unused-pin decisions should be reviewed against the manufacturer datasheet and the selected external memory implementation.
This product page consolidates the core LPC4310FBD144 identifiers, package information, architectural features, sourcing workflow, and design-oriented guidance. It is intended to help engineers quickly establish whether this dual-core MCU matches their memory, connectivity, signal-processing, and 144-pin packaging requirements before beginning board-level design.
直接替换替代料: LPC4310FBD144 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料LPC4310FBD144 最大额定值与电气特性
| Product Type | 32-bit dual-core microcontroller |
| Main Processor | Arm Cortex-M4 |
| Coprocessor | Arm Cortex-M0 |
| 最大时钟频率 | 204 MHz |
| Bit Width | 32 bit |
| Internal SRAM | 168 kB |
| On-Chip Flash | 0 kB (ROMless) |
| 封装 | 144-LQFP (20 mm x 20 mm) |
| 引脚数量 | 144 pins |
| 安装类型 | Surface mount |
| Temperature Grade | Industrial |
| Communications Peripheral | CAN |
| Security Peripheral | AES |
| External Storage Interface | SPIFI |
| Serial GPIO | SGPIO |
| Timer Peripheral | SCT |
LPC4310FBD144 144-lqfp (20 mm x 20 mm) 引脚配置指南
LPC4310FBD144(144-lqfp (20 mm x 20 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LPC4310FBD144.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LPC4310FBD144 适用于 6 应用s: CAN-Based Industrial Control, Industrial Data Acquisition, Motor Control and Automation, Secure Communications Gateway, Precision Measurement Equipment, Embedded Audio and Signal Processing.
CAN-Based Industrial Control
The LPC4310FBD144 fits an industrial controller that combines network communication with real-time signal processing. Its Cortex-M4 main core can execute control algorithms at up to 204 MHz, while the Cortex-M0 coprocessor can service appropriate peripheral or background tasks. The integrated CAN controller supports communication with remote equipment, and the 168 kB SRAM provides room for buffers, protocol state, and application data. Because the device is ROMless, the controller can boot from external nonvolatile memory and support field firmware updates. Designers should add the appropriate CAN transceiver, termination, surge protection, and isolation according to the installation environment.
推荐
Industrial Data Acquisition
The LPC4310FBD144 is suitable for data-acquisition equipment that must process sensor information and manage communications concurrently. Its 204 MHz Cortex-M4 core supports filtering, calibration, and real-time signal processing, while 168 kB of SRAM can hold acquisition buffers and working data. The SGPIO and SCT peripherals complement the broader mixed-signal resource set for deterministic timing and sensor support. A practical implementation would use the NXP external-memory interface to store firmware and possibly samples, then transmit results through CAN or another available serial interface. Signal conditioning and analog front-end design remain separate from the microcontroller.
推荐
Motor Control and Automation
The LPC4310FBD144 can serve as the central controller in motor-control and automation equipment where deterministic timing, communications, and concurrent processing matter. The Cortex-M4 core is suited to faster control-loop and signal-processing tasks, and the Cortex-M0 coprocessor can handle suitable monitoring or peripheral activity. SCT timing resources and SGPIO can support deterministic interface requirements, while CAN provides a path to supervisory controllers and remote nodes. The ROMless configuration permits firmware to reside in external memory, which can aid controlled updates in deployed systems. Power-stage design, isolation, fault handling, and protection must be implemented around the MCU rather than inferred from the controller itself.
推荐
Secure Communications Gateway
The LPC4310FBD144 fits secure embedded communications designs that need both a fast control path and hardware-assisted AES processing. Its 204 MHz Cortex-M4 core can handle protocol and packet-processing tasks, while 168 kB of SRAM supports buffers and connection state. CAN is available for network communication, and SPIFI permits access to external serial storage for code or configuration data. In a ROMless design, boot code and firmware must be organized so the external memory is initialized correctly before normal application execution. Secure product design should also include protected keys, controlled boot behavior, update authentication, and appropriate physical protection of the external memory interface.
推荐
Precision Measurement Equipment
The LPC4310FBD144 is appropriate for precision embedded measurement systems that require deterministic sampling support, substantial working memory, and flexible communications. The 204 MHz Cortex-M4 core can execute digital filtering and correction algorithms, while the Cortex-M0 coprocessor can support parallel background duties. The 168 kB SRAM helps accommodate sample buffers and state, and CAN can connect the instrument to laboratory or production equipment. External memory is required for program storage because the MCU is ROMless. Analog front ends, reference sources, excitation circuits, and protection networks remain essential system blocks and should be designed independently of the digital controller.
推荐
Embedded Audio and Signal Processing
The LPC4310FBD144 can act as the processing engine in embedded audio or general signal-processing equipment. Its 204 MHz Cortex-M4 core is suited to filtering, modulation, and other computationally intensive control functions, while the Cortex-M0 coprocessor can handle suitable concurrent service tasks. The 168 kB of internal SRAM is useful for working buffers, and external memory can hold program code because the part is ROMless. SGPIO and SCT support deterministic serial and timing operations that may assist data movement and sample handling. The implementation should account for external-memory timing, signal integrity, clock planning, and the latency requirements of the selected audio or DSP algorithm.
推荐
工程参考数据: LPC4310FBD144 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | NXP Semiconductors |
| Package | 144-LQFP (20 mm x 20 mm) |
| Main Processor | Arm Cortex-M4 |
| Coprocessor | Arm Cortex-M0 |
| Maximum Frequency | 204 MHz |
| Internal SRAM | 168 kB |
| Internal Program Memory | 0 kB (ROMless) |
| Communications and Security | CAN, AES, SPIFI, SGPIO, and SCT |
关键差异点
- Dual-core Cortex architecture (对比 Simpler single-core Cortex-M microcontroller)
- Substantial internal SRAM for a ROMless design (对比 Low-memory Cortex-M microcontroller)
- Integrated communications and security resources (对比 General-purpose microcontroller without dedicated CAN and AES)
设计说明
Plan the external-memory connections directly from the NXP pin-description table and the selected memory-device requirements. Because the LPC4310FBD144 is ROMless, the external memory must be initialized before application code can run. Route the memory bus with short, continuous paths, provide the required decoupling, and avoid splitting memory-bus signals across unrelated analog or switching circuitry.
Separate clock, external-memory, and communications routing from sensitive analog inputs and switching-node connections. The 204 MHz Cortex-M4 and external memory interface require controlled impedance and minimized loop area. Keep power and ground planes continuous, place decoupling close to the relevant pins, and route high-current outputs away from communication and measurement signals to reduce coupling.
Do not treat two Cortex-M processors as interchangeable with a single-core MCU. Define the task allocation between the Cortex-M4 and Cortex-M0 cores, establish interrupt priorities and memory ownership, and verify firmware startup with the selected external-memory configuration. Also confirm all 144 package connections against the manufacturer pin table before releasing the PCB.
Base the power network on the actual external-memory load, processor activity, and operating environment rather than a generic current assumption. Use the manufacturer recommended decoupling and power-routing topology, and check startup and worst-case processor activity in the complete system. The ROMless design adds an external memory supply and its switching current to the overall supply design.
合规信息
The device is identified as industrial grade, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is established in the available product information. AEC-Q100 is not applicable to the identified industrial-grade configuration.