NXP Semiconductors

LPC4310FBD144 - 204MHz Dual-Core Cortex-M4/M0 | NXP

부품 번호: LPC4310FBD144 ✓ 활성
144-LQFP (20 mm x 20 mm) Package 204 MHz Speed 0 kB (ROMless) Memory
MOQ: 1 |

LPC4310FBD144 개요

The NXP Semiconductors LPC4310FBD144 is a 32-bit dual-core microcontroller combining an Arm Cortex-M4 digital signal controller with an Arm Cortex-M0 coprocessor at up to 204 MHz. It is a ROMless device with 168 kB of SRAM and is packaged in a 144-pin LQFP measuring 20 mm by 20 mm. Its combination of high-frequency signal-processing capability, a coprocessor, and extensive serial and communications peripherals makes it suitable for embedded systems that divide control, monitoring, and signal-processing work between two processor cores.

A dual-core microcontroller is an integrated circuit containing two independently programmable processor cores within one package. The Cortex-M4 core is optimized for compact embedded control and digital signal processing, while the Cortex-M0 core can handle lower-complexity tasks, peripheral servicing, or background operations. This architecture reduces the need for separate companion controllers when the system must coordinate deterministic control functions with higher-throughput signal processing.

Key LPC4310 features include 168 kB of SRAM, a maximum listed operating frequency of 204 MHz, CAN connectivity, AES cryptographic hardware, SPIFI support, SGPIO, and SCT. The ROMless configuration requires the application program to be stored in external nonvolatile memory, allowing firmware, code, and boot images to be upgraded independently of the microcontroller package. The 144-LQFP package also provides a large pin count for external memory, communications, and control interfaces.

The LPC4310FBD144 belongs to NXP's LPC43xx family of mixed-signal and digital signal controllers. Its Cortex-M4/M0 architecture supports concurrent software tasks, while the Cortex-M4 main core addresses applications requiring faster arithmetic and signal-processing performance. The external-memory interface and ROMless design add board-level flexibility but require careful initialization of the external memory device before the application code can execute.

Typical uses include industrial signal-processing equipment, communications controllers, motor-control platforms, data-acquisition systems, and embedded products requiring CAN plus secure serial connectivity. The microcontroller can coordinate sensors and actuators through its mixed-signal peripherals while the M0 coprocessor supports low-latency peripheral servicing. Its 204 MHz Cortex-M4 core is particularly useful for filtering, control-loop execution, and protocol processing.

Designers should allocate the external memory interface according to the NXP pin description and memory-device timing requirements, and should isolate high-speed communications and switching nodes to prevent unwanted coupling. Firmware must provide the boot and configuration sequence required for ROMless operation. Decoupling, grounding, signal integrity, and unused-pin decisions should be reviewed against the manufacturer datasheet and the selected external memory implementation.

This product page consolidates the core LPC4310FBD144 identifiers, package information, architectural features, sourcing workflow, and design-oriented guidance. It is intended to help engineers quickly establish whether this dual-core MCU matches their memory, connectivity, signal-processing, and 144-pin packaging requirements before beginning board-level design.

드롭인 대체품: LPC4310FBD144 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

LPC4310FBD144 최대 정격 & 전기적 특성

Product Type 32-bit dual-core microcontroller
Main Processor Arm Cortex-M4
Coprocessor Arm Cortex-M0
최대 클록 주파수 204 MHz
Bit Width 32 bit
Internal SRAM 168 kB
On-Chip Flash 0 kB (ROMless)
패키지 144-LQFP (20 mm x 20 mm)
핀 수 144 pins
실장 유형 Surface mount
Temperature Grade Industrial
Communications Peripheral CAN
Security Peripheral AES
External Storage Interface SPIFI
Serial GPIO SGPIO
Timer Peripheral SCT

LPC4310FBD144 144-lqfp (20 mm x 20 mm) 핀 구성 가이드

LPC4310FBD144(144-lqfp (20 mm x 20 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

LPC4310FBD144의 144-lqfp (20 mm x 20 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: LPC4310FBD144.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

LPC4310FBD144 적합 용도: 6 애플리케이션s: CAN-Based Industrial Control, Industrial Data Acquisition, Motor Control and Automation, Secure Communications Gateway, Precision Measurement Equipment, Embedded Audio and Signal Processing.

🏭

CAN-Based Industrial Control

The LPC4310FBD144 fits an industrial controller that combines network communication with real-time signal processing. Its Cortex-M4 main core can execute control algorithms at up to 204 MHz, while the Cortex-M0 coprocessor can service appropriate peripheral or background tasks. The integrated CAN controller supports communication with remote equipment, and the 168 kB SRAM provides room for buffers, protocol state, and application data. Because the device is ROMless, the controller can boot from external nonvolatile memory and support field firmware updates. Designers should add the appropriate CAN transceiver, termination, surge protection, and isolation according to the installation environment.

⚡

Industrial Data Acquisition

The LPC4310FBD144 is suitable for data-acquisition equipment that must process sensor information and manage communications concurrently. Its 204 MHz Cortex-M4 core supports filtering, calibration, and real-time signal processing, while 168 kB of SRAM can hold acquisition buffers and working data. The SGPIO and SCT peripherals complement the broader mixed-signal resource set for deterministic timing and sensor support. A practical implementation would use the NXP external-memory interface to store firmware and possibly samples, then transmit results through CAN or another available serial interface. Signal conditioning and analog front-end design remain separate from the microcontroller.

🏭

Motor Control and Automation

The LPC4310FBD144 can serve as the central controller in motor-control and automation equipment where deterministic timing, communications, and concurrent processing matter. The Cortex-M4 core is suited to faster control-loop and signal-processing tasks, and the Cortex-M0 coprocessor can handle suitable monitoring or peripheral activity. SCT timing resources and SGPIO can support deterministic interface requirements, while CAN provides a path to supervisory controllers and remote nodes. The ROMless configuration permits firmware to reside in external memory, which can aid controlled updates in deployed systems. Power-stage design, isolation, fault handling, and protection must be implemented around the MCU rather than inferred from the controller itself.

🌐

Secure Communications Gateway

The LPC4310FBD144 fits secure embedded communications designs that need both a fast control path and hardware-assisted AES processing. Its 204 MHz Cortex-M4 core can handle protocol and packet-processing tasks, while 168 kB of SRAM supports buffers and connection state. CAN is available for network communication, and SPIFI permits access to external serial storage for code or configuration data. In a ROMless design, boot code and firmware must be organized so the external memory is initialized correctly before normal application execution. Secure product design should also include protected keys, controlled boot behavior, update authentication, and appropriate physical protection of the external memory interface.

🧩

Precision Measurement Equipment

The LPC4310FBD144 is appropriate for precision embedded measurement systems that require deterministic sampling support, substantial working memory, and flexible communications. The 204 MHz Cortex-M4 core can execute digital filtering and correction algorithms, while the Cortex-M0 coprocessor can support parallel background duties. The 168 kB SRAM helps accommodate sample buffers and state, and CAN can connect the instrument to laboratory or production equipment. External memory is required for program storage because the MCU is ROMless. Analog front ends, reference sources, excitation circuits, and protection networks remain essential system blocks and should be designed independently of the digital controller.

🎧

Embedded Audio and Signal Processing

The LPC4310FBD144 can act as the processing engine in embedded audio or general signal-processing equipment. Its 204 MHz Cortex-M4 core is suited to filtering, modulation, and other computationally intensive control functions, while the Cortex-M0 coprocessor can handle suitable concurrent service tasks. The 168 kB of internal SRAM is useful for working buffers, and external memory can hold program code because the part is ROMless. SGPIO and SCT support deterministic serial and timing operations that may assist data movement and sample handling. The implementation should account for external-memory timing, signal integrity, clock planning, and the latency requirements of the selected audio or DSP algorithm.

What is the LPC4310FBD144?
The LPC4310FBD144 is a 32-bit dual-core NXP microcontroller built around an Arm Cortex-M4 main processor and an Arm Cortex-M0 coprocessor. According to the NXP product page, it operates up to 204 MHz, provides 168 kB of SRAM, and is offered in a 144-LQFP package. It is a ROMless device intended for embedded applications requiring both signal processing and concurrent control processing.
What are the key specifications of LPC4310FBD144 that engineers should know?
The principal LPC4310FBD144 specifications are an Arm Cortex-M4 processor, an Arm Cortex-M0 coprocessor, a 204 MHz maximum clock, 168 kB of SRAM, and no internal program flash. The NXP product page also identifies CAN, AES, SPIFI, SGPIO, and SCT functions, while the device is supplied in a 20 mm by 20 mm 144-LQFP package. These characteristics define its role as a high-performance, ROMless embedded signal controller.
Where can I download the LPC4310FBD144 datasheet PDF?
The official LPC4310FBD144 documentation is available through the NXP product page at https://www.nxp.com/part/LPC4310FBD144. From that page, engineers can access the manufacturer datasheet and device documentation. The LPC4310FBD144 datasheet is the controlling reference for the complete 144-pin assignment, electrical limits, memory interfaces, and recommended application circuit.
Where can I find the LPC4310FBD144 pinout?
The LPC4310FBD144 pinout is published in the manufacturer datasheet and device documentation associated with the NXP part page. The part uses a 144-pin LQFP package, so the pin-description table should be consulted for every signal, power pin, ground pin, and special-function connection. Use that table when assigning PCB tracks and checking multiplexed peripheral functions.
Does the LPC4310FBD144 have internal flash memory?
No. The LPC4310FBD144 is a ROMless microcontroller with 168 kB of internal SRAM and no internal program flash. According to the NXP product information, application code must be stored externally, commonly through the processor's external memory interface. The selected external memory must therefore match the electrical, timing, and address requirements of the design.
Why does the LPC4310FBD144 use both Cortex-M4 and Cortex-M0 cores?
The two-core architecture lets the Cortex-M4 main processor perform higher-performance control and digital signal processing while the Cortex-M0 coprocessor handles suitable background or peripheral tasks. The NXP product page describes the LPC4310 as an Arm Cortex-M4 digital signal controller with a Cortex-M0 coprocessor. This can simplify systems that otherwise require an additional controller for concurrent operations.
Is LPC4310FBD144 suitable for industrial signal-processing equipment?
The LPC4310FBD144 is suitable for industrial embedded signal-processing designs requiring substantial SRAM and concurrent processing. Its 204 MHz Cortex-M4 core, 168 kB of SRAM, CAN, AES, SPIFI, SGPIO, and SCT peripherals cover many control, acquisition, and communications requirements. The device is identified as industrial grade, and the manufacturer datasheet should be checked against the complete electrical and environmental limits.
What communications and security peripherals does the LPC4310FBD144 provide?
The NXP product page identifies CAN, AES, SPIFI, SGPIO, and SCT as notable device features. CAN supports industrial and embedded network communication, while AES provides hardware-assisted cryptographic operations. SPIFI connects the ROMless controller to external serial memory, and SGPIO and SCT extend deterministic serial and timer capabilities for system control.
What is the difference between the Cortex-M4 core and Cortex-M0 coprocessor?
The Cortex-M4 core is the LPC4310FBD144's primary processor and is optimized for faster embedded control and digital signal-processing work, with operation up to 204 MHz. The Cortex-M0 coprocessor is a simpler, lower-resource core intended for suitable concurrent tasks. The exact peripheral allocation and software coordination should follow the NXP device documentation and the intended real-time workload.
Can a different LPC microcontroller replace the LPC4310FBD144?
A replacement should not be selected from the LPC family name alone. It must match the 144-LQFP footprint, provide pin-compatible power, ground, clock, debug, external-memory, and peripheral connections, and satisfy the application's memory and signal-processing requirements. No qualifying drop-in replacement is established here, so compare a candidate against the complete NXP pin table and datasheet before changing the BOM.
What is the best drop-in replacement for LPC4310FBD144?
No verified drop-in replacement for the LPC4310FBD144 is established by the available cross-reference information. A suitable substitute would need the same 144-LQFP footprint and compatible external-memory and peripheral connections, but it must also be checked for differences affecting firmware, clocking, SRAM, and peripheral operation. Use the manufacturer pin and electrical tables to validate any proposed substitution.
When should I choose the LPC4310FBD144 instead of a simpler microcontroller?
Choose the LPC4310FBD144 when the design benefits from a 204 MHz Cortex-M4, a concurrent Cortex-M0 coprocessor, and 168 kB of SRAM. Its ROMless architecture also suits systems that prefer application code and boot content in external memory. A simpler MCU can be preferable when the workload fits one core, internal flash is acceptable, or the 144-pin package is unnecessary.
Is the LPC4310FBD144 suitable for a CAN-based industrial controller?
The LPC4310FBD144 is a strong candidate for a CAN-based industrial controller because it combines a 204 MHz Cortex-M4, a Cortex-M0 coprocessor, 168 kB of SRAM, CAN, AES, and multiple timing and serial peripherals. The controller would use CAN for network communication while the two cores divide control and signal-processing workloads. Final electrical compliance still depends on the transceiver, isolation, termination, and protection design.
Where to buy LPC4310FBD144 online?
Use the Request a Quote form on this page to ask about LPC4310FBD144 availability, order quantities, and delivery timing. The manufacturer identifier corresponds to a 144-LQFP, 204 MHz Cortex-M4/M0 ROMless microcontroller with 168 kB of SRAM. Quote review should also confirm the required package, industrial temperature grade, and any date-code or sourcing constraints.
What is the price of LPC4310FBD144?
Submit the LPC4310FBD144 part number through the Request a Quote form on this page for current commercial terms. The structured pricing interface tracks changing market conditions and quantity requirements rather than embedding a static price in technical copy. Buyers should confirm minimum order quantity, authorized sourcing conditions, and the exact NXP ordering configuration during quotation.
What is the lead time for LPC4310FBD144?
Request the current LPC4310FBD144 lead time and minimum order quantity through the Request a Quote form on this page. Lead time can depend on order volume, inventory position, package configuration, and sourcing conditions. Engineers should include their production schedule in the request so the supply commitment can be evaluated against the project timeline.
Is LPC4310FBD144 in stock?
Current LPC4310FBD144 inventory should be confirmed through the Request a Quote form on this page. The form allows buyers to specify required quantity, production schedule, and acceptable sourcing conditions. Treat availability as quote-dependent until the order confirmation and delivery details are returned.
What is the best NXP equivalent for LPC4310FBD144?
No verified NXP equivalent can be named as a drop-in substitute from the available cross-reference material. Any candidate must retain the 144-LQFP footprint and provide compatible pin, clock, external-memory, debug, and peripheral functions. Compare the candidate's SRAM, Cortex-M4 performance, ROMless boot requirements, and peripheral mapping with the original LPC4310FBD144 before approving a replacement.

엔지니어링 참조 데이터: LPC4310FBD144 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the LPC4310FBD144 when a design needs a high-performance Cortex-M4, a second Cortex-M0 core for suitable concurrent work, 168 kB of SRAM, and extensive communications or timing resources. It is especially attractive for CAN-connected industrial control, data acquisition, motor automation, and signal-processing products that benefit from ROMless boot or field-update flexibility. A simpler Cortex-M device may be preferable when the workload fits one core, internal flash is operationally preferable, or a smaller package reduces cost and layout effort. No verified drop-in substitute is established for this 144-LQFP part, so any alternative should be selected only after checking the complete pin assignment, memory architecture, peripheral map, electrical limits, and firmware implications against the NXP documentation.

대체품과의 비교

파라미터 이 제품
Brand NXP Semiconductors
Package 144-LQFP (20 mm x 20 mm)
Main Processor Arm Cortex-M4
Coprocessor Arm Cortex-M0
Maximum Frequency 204 MHz
Internal SRAM 168 kB
Internal Program Memory 0 kB (ROMless)
Communications and Security CAN, AES, SPIFI, SGPIO, and SCT

주요 차별점

  • Dual-core Cortex architecture (vs Simpler single-core Cortex-M microcontroller)
  • Substantial internal SRAM for a ROMless design (vs Low-memory Cortex-M microcontroller)
  • Integrated communications and security resources (vs General-purpose microcontroller without dedicated CAN and AES)

설계 노트

Plan the external-memory connections directly from the NXP pin-description table and the selected memory-device requirements. Because the LPC4310FBD144 is ROMless, the external memory must be initialized before application code can run. Route the memory bus with short, continuous paths, provide the required decoupling, and avoid splitting memory-bus signals across unrelated analog or switching circuitry.

Separate clock, external-memory, and communications routing from sensitive analog inputs and switching-node connections. The 204 MHz Cortex-M4 and external memory interface require controlled impedance and minimized loop area. Keep power and ground planes continuous, place decoupling close to the relevant pins, and route high-current outputs away from communication and measurement signals to reduce coupling.

Do not treat two Cortex-M processors as interchangeable with a single-core MCU. Define the task allocation between the Cortex-M4 and Cortex-M0 cores, establish interrupt priorities and memory ownership, and verify firmware startup with the selected external-memory configuration. Also confirm all 144 package connections against the manufacturer pin table before releasing the PCB.

Base the power network on the actual external-memory load, processor activity, and operating environment rather than a generic current assumption. Use the manufacturer recommended decoupling and power-routing topology, and check startup and worst-case processor activity in the complete system. The ROMless design adds an external memory supply and its switching current to the overall supply design.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The device is identified as industrial grade, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is established in the available product information. AEC-Q100 is not applicable to the identified industrial-grade configuration.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

LPC4310FBD144 datasheet LPC4310FBD144 datasheet pdf LPC4310FBD144 pinout LPC4310FBD144 LQFP144 LPC4310FBD144 specifications LPC4310FBD144 204MHz Cortex-M4 LPC4310FBD144 168kB SRAM LPC4310FBD144 replacement LPC4310FBD144 equivalent LPC4310FBD144 cross reference LPC4310FBD144 CAN controller LPC4310FBD144 signal processing NXP LPC4310FBD144 LPC4310FBD144 price LPC4310FBD144 stock

관련 부품 & 용어

NXP Semiconductors LPC4310FBD144 LPC43xx Arm Cortex-M4 Arm Cortex-M0 dual-core microcontroller digital signal controller embedded microcontroller semiconductor ROMless architecture 168 kB SRAM 204 MHz CAN controller AES hardware SPIFI SGPIO SCT 144-LQFP LQFP package family surface mount external memory interface industrial embedded control signal processing industrial data acquisition embedded communications
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기