LT1014AMJ - Quad Precision Op Amp | Analog Devices
料号: LT1014AMJ ✓ 量产中LT1014AMJ 概述
A precision operational amplifier is a voltage-feedback amplifier optimized for low offset voltage, low input bias current, high open-loop gain, and predictable output behavior. The LT1014 family belongs to the broader hierarchy of operational amplifier, analog amplifier, analog integrated circuit, and semiconductor categories. Its precision characteristics make it suitable for conditioning weak sensor signals while its single-supply capability helps simplify dual-rail instrumentation.
Key features include low offset-voltage temperature coefficient, high gain, low supply current, and low noise. These characteristics are important in strain-gauge, thermocouple, and current-loop systems because they reduce measurement error near the signal floor. Operation from a single 5 V supply also allows the device to work in compact battery-powered instruments where one supply rail may be available.
The LT1014 combines four amplifiers in one 14-pin industry-standard configuration, reducing the component count in multichannel measurement systems. Its input range extends to ground, which is valuable for sensors that produce signals near zero volts. The manufacturer documentation also identifies operation from ±15 V and single 5 V supplies, covering both traditional laboratory instrumentation and lower-voltage embedded measurement equipment.
Typical applications include battery-powered precision instruments, strain-gauge signal conditioners, thermocouple amplifiers, instrumentation amplifiers, 4 mA to 20 mA current-loop transmitters, multiple-limit threshold detectors, and active filters. These uses benefit from the amplifier family’s combination of precision, low noise, low supply current, and flexible supply-voltage support.
When laying out a circuit, keep input and feedback components close to their associated amplifier pins and provide suitable bypassing on each supply rail. Check input common-mode limits, output swing, and stability requirements at the selected supply voltage before committing the layout.
This product page organizes the LT1014AMJ specifications, package information, sourcing guidance, comparison details, and practical design notes into a focused engineering reference for precision analog signal-chain design.
直接替换替代料: LT1014AMJ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LT1014AMJ (相同外形与封装尺寸) ——差异在于 Package, Supply Current.
LT1014MJB
✅ 直接替换📋 参考替代料(不在目录中)
LT1014MJ
✅ 直接替换联系询价
查看数据手册 →LT1014CJ
✅ 直接替换联系询价
查看数据手册 →LT1014AMJ#PBF
✅ 直接替换📋 参考替代料(不在目录中)
FT1014IN
✅ 直接替换📋 参考替代料(不在目录中)
LT1014AMJ 最大额定值与电气特性
| Product Type | Quad precision operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| 封装 | 14-pin CERDIP |
| 引脚数量 | 14 pins |
| Supported Supply Configuration | ±15 V and single 5 V |
| Single-Supply Voltage | 5 V |
| Dual-Supply Voltage | ±15 V |
| Input Range | Extends to ground |
| 安装类型 | Through-hole |
LT1014AMJ 14-pin cerdip 引脚配置指南
LT1014AMJ(14-pin cerdip 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: LT1014AMJ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LT1014AMJ 适用于 6 应用s: Battery-Powered Precision Instruments, Strain-Gauge Signal Conditioning, Thermocouple Amplifier, 4 mA to 20 mA Current-Loop Transmitter, Instrumentation Amplifier, Active Filters and Threshold Detection.
Battery-Powered Precision Instruments
The LT1014AMJ fits battery-powered precision instruments because the LT1014 family combines four precision amplifier circuits with low supply current and single 5 V operation. Placing four amplifiers in one 14-pin CERDIP package reduces board area and component count in portable measurement systems. Its low offset-voltage temperature coefficient, high gain, and low noise help preserve accuracy as the supply voltage, temperature, and input level vary. The input range extending to ground is particularly useful for sensors with zero-volt-centered outputs. In a portable analyzer, four channels could amplify sensor, reference, or feedback signals while maintaining a common operating point.
推荐
Strain-Gauge Signal Conditioning
The LT1014AMJ is suited to strain-gauge signal conditioning because its four precision operational amplifiers can form low-level gain stages while maintaining low offset drift and low noise. A strain bridge produces a small differential voltage, so minimizing input-referred errors helps protect measurement resolution. The low offset-voltage temperature coefficient limits sensitivity to ambient changes, while the high-gain architecture supports the amplification required by instrumentation front ends. Four packaged amplifiers can also support bridge excitation, differential input, gain, and active filtering without requiring four separate packages.
推荐
Thermocouple Amplifier
The LT1014AMJ can serve as a building block in thermocouple amplification because thermocouple signals are small and require low-offset, low-noise, high-gain signal handling. The device's precision characteristics help reduce errors relative to the millivolt-level sensor output, while its input range extending to ground supports signals near the lower rail. Four circuits allow a designer to implement differential input, gain, filtering, and compensation stages within one package. The complete thermocouple circuit must still include cold-junction compensation and protection appropriate for the sensor and industrial environment.
推荐
4 mA to 20 mA Current-Loop Transmitter
The LT1014AMJ fits 4 mA to 20 mA current-loop transmitter signal conditioning because the manufacturer identifies this application for the LT1014 family. The amplifier's high gain and low offset-voltage temperature coefficient support accurate conditioning of sensor-derived voltages, while low noise and low supply current help preserve the usable loop signal. Four amplifier circuits can provide input amplification, error amplification, output drive assistance, and filtering in a multi-stage transmitter design. The final loop current, compliance voltage, bandwidth, and isolation requirements must be verified against the complete transmitter architecture.
推荐
Instrumentation Amplifier
The LT1014AMJ is useful in instrumentation-amplifier designs where a small differential signal must be amplified accurately before digitization or transmission. Its low offset-voltage temperature coefficient limits drift, its high gain supports the required amplification, and its low noise improves the signal-to-noise ratio of the measurement chain. Four amplifier circuits provide flexibility for a classic three-amplifier topology plus an additional buffer or active-filter stage. Input bias current, common-mode range, output swing, and stability at the selected gain must be checked against the sensor source impedance and 5 V or ±15 V operating condition.
推荐
Active Filters and Threshold Detection
The LT1014AMJ supports active-filter and threshold-detection circuits because each of its four precision amplifier channels can implement independent analog functions. The high gain and low offset-voltage temperature coefficient are useful in filters where component tolerances should not dominate the transfer function, while low noise supports low-level condition detection. Multiple limit detectors can be built without multiple packages, simplifying channel count and keeping related circuitry in one thermal environment. Component selection for gain-setting resistors, capacitors, and comparators must preserve the intended passband and switching thresholds.
推荐
推荐产品汇总
工程参考数据: LT1014AMJ ——对比、设计指导和合规信息。
选型指南
Consider LT1014MJB, LT1014MJ, or LT1014CJ when a documented ordering-code or temperature-grade difference fits the design, but verify the exact limits before substitution. LT1014AMJ#PBF can be evaluated when its ordering and finish code meet the production requirements. FT1014IN is the cross-brand candidate to review when a second-source arrangement is needed. Its basic four-circuit, 14-pin architecture supports drop-in consideration, but its offset, noise, supply, temperature, and stability ratings require direct comparison. For designs needing only two amplifiers, LT1013 offers a different channel count and should be evaluated separately rather than treated as a package-identical replacement.
与替代料对比
| 参数 | 本产品 | LT1014MJB | LT1014MJ | LT1014CJ | LT1014AMJ#PBF | FT1014IN |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Force Technologies |
| Package | 14-pin CERDIP | 14-pin CERDIP | 14-pin CERDIP | 14-pin CERDIP | 14-pin CERDIP | 14-pin CERDIP |
| Amplifier Circuit Count | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
关键差异点
- Four precision amplifier circuits in one ceramic-DIP package (对比 LT1013)
- Single 5 V and dual ±15 V supply support (对比 FT1014IN)
- Input operation extending to ground (对比 LT1014CJ)
- Precision features tailored to measurement signals (对比 LM224J)
设计说明
Route each amplifier's input, feedback resistor, and compensation network close to the corresponding package pins to minimize parasitic capacitance and interference. Because the LT1014AMJ contains four amplifier circuits in one 14-pin CERDIP package, keep sensitive channels physically separated from noisy power and return paths where possible. Connect supply bypassing close to the device and maintain short, low-impedance ground returns.
Design the power rails for either single 5 V or dual ±15 V operation, as identified by the manufacturer documentation. Confirm input common-mode range and output swing at the selected supply voltage before closing the gain configuration. Decouple the supply pins locally, and avoid allowing input signals to exceed the amplifier's operating limits when supply sequencing is required.
Treat input-bias-current error and source impedance as part of the gain-error budget, especially for strain-gauge and thermocouple circuits whose source impedances can be high. Use the datasheet's input-bias-current and offset specifications to calculate the resulting error. Stable feedback-network component values and short input paths are important when operating at high closed-loop gain.
Do not assume that every LT1014 ordering suffix has identical temperature or grade limits. Before using an LT1014MJB, LT1014MJ, LT1014CJ, LT1014AMJ#PBF, or FT1014IN as a substitute, verify the ordering table, supply limits, common-mode range, output swing, and temperature range. Also confirm that the alternative's stability characteristics meet the selected gain and capacitive-load conditions.
合规信息
The target is a precision analog operational amplifier; AEC-Q100 qualification is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.