Analog Devices

LT1014AMJ - Quad Precision Op Amp | Analog Devices

MPN: LT1014AMJ ✓ Aktif
±15 V and single 5 V Vdss 14-pin CERDIP Package
MOQ: 1 |

LT1014AMJ Ringkasan

The Analog Devices LT1014AMJ is a four-circuit precision operational amplifier designed for low-noise instrumentation, signal conditioning, and active filtering. The device operates from single 5 V or dual ±15 V supplies, supports input voltages extending to ground, and is packaged in a 14-pin CERDIP package.

A precision operational amplifier is a voltage-feedback amplifier optimized for low offset voltage, low input bias current, high open-loop gain, and predictable output behavior. The LT1014 family belongs to the broader hierarchy of operational amplifier, analog amplifier, analog integrated circuit, and semiconductor categories. Its precision characteristics make it suitable for conditioning weak sensor signals while its single-supply capability helps simplify dual-rail instrumentation.

Key features include low offset-voltage temperature coefficient, high gain, low supply current, and low noise. These characteristics are important in strain-gauge, thermocouple, and current-loop systems because they reduce measurement error near the signal floor. Operation from a single 5 V supply also allows the device to work in compact battery-powered instruments where one supply rail may be available.

The LT1014 combines four amplifiers in one 14-pin industry-standard configuration, reducing the component count in multichannel measurement systems. Its input range extends to ground, which is valuable for sensors that produce signals near zero volts. The manufacturer documentation also identifies operation from ±15 V and single 5 V supplies, covering both traditional laboratory instrumentation and lower-voltage embedded measurement equipment.

Typical applications include battery-powered precision instruments, strain-gauge signal conditioners, thermocouple amplifiers, instrumentation amplifiers, 4 mA to 20 mA current-loop transmitters, multiple-limit threshold detectors, and active filters. These uses benefit from the amplifier family’s combination of precision, low noise, low supply current, and flexible supply-voltage support.

When laying out a circuit, keep input and feedback components close to their associated amplifier pins and provide suitable bypassing on each supply rail. Check input common-mode limits, output swing, and stability requirements at the selected supply voltage before committing the layout.

This product page organizes the LT1014AMJ specifications, package information, sourcing guidance, comparison details, and practical design notes into a focused engineering reference for precision analog signal-chain design.

Pilihan pengganti yang segera untuk LT1014AMJ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LT1014AMJ (sama faktor bentuk dan kaki) — berbeza dalam Package, Supply Current.

Analog Devices
Supply Current: 350 uA
Bandingkan Dengan LT1014AMJ →
Texas Instruments
Package: 14-pin CDIP (J)
Supply Current: Low supply current; exact value not provided
Bandingkan Dengan LT1014AMJ →

LT1014MJB

✅ Masuk Drop-In
📦 14-pin CERDIP
0 channel-count difference (4 vs 4) and 0 pin-count difference (14 vs 14); ordering grade or temperature code differs

📋 Alternatif rujukan (tidak dalam katalog)

LT1014MJ

✅ Masuk Drop-In
Texas Instruments
📦 14-pin CERDIP
4 amplifiers · Quad precision operational amplifier · 5 V · 44 V · ±15 V · 14-pin CDIP (J) · Through-hole · -55°C

Hubungi untuk harga

Lihat Datasheet →

LT1014CJ

✅ Masuk Drop-In
Analog Devices
📦 14-pin CERDIP
Quad precision operational amplifier · Standard general-purpose precision amplifier · 4 channels · 14-pin CERDIP · Through-hole · 50 uV · 0.3 uV/°C · 0.15 nA

Hubungi untuk harga

Lihat Datasheet →

LT1014AMJ#PBF

✅ Masuk Drop-In
📦 14-pin CERDIP
0 channel-count difference (4 vs 4) and 0 pin-count difference (14 vs 14); ordering or terminal-finish suffix differs

📋 Alternatif rujukan (tidak dalam katalog)

FT1014IN

✅ Masuk Drop-In
📦 14-pin CERDIP
0 channel-count difference (4 vs 4) and 0 pin-count difference (14 vs 14); cross-brand electrical limits require verification

📋 Alternatif rujukan (tidak dalam katalog)

LT1014AMJ Penilaian maksimum & Ciri-ciri Elektrik

Product Type Quad precision operational amplifier
Number of Amplifier Circuits 4 circuits
Kemasan 14-pin CERDIP
Kiraan Pin 14 pins
Supported Supply Configuration ±15 V and single 5 V
Single-Supply Voltage 5 V
Dual-Supply Voltage ±15 V
Input Range Extends to ground
Jenis Pemasangan Through-hole

Panduan Konfigurasi Pin LT1014AMJ 14-pin cerdip

Konfigurasi pin untuk LT1014AMJ (14-pin cerdip pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 14-pin cerdip untuk LT1014AMJ

Tiada data garisan pin yang diperoleh untuk LT1014AMJ.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LT1014AMJ patut untuk 6 aplikasis: Battery-Powered Precision Instruments, Strain-Gauge Signal Conditioning, Thermocouple Amplifier, 4 mA to 20 mA Current-Loop Transmitter, Instrumentation Amplifier, Active Filters and Threshold Detection.

📱

Battery-Powered Precision Instruments

The LT1014AMJ fits battery-powered precision instruments because the LT1014 family combines four precision amplifier circuits with low supply current and single 5 V operation. Placing four amplifiers in one 14-pin CERDIP package reduces board area and component count in portable measurement systems. Its low offset-voltage temperature coefficient, high gain, and low noise help preserve accuracy as the supply voltage, temperature, and input level vary. The input range extending to ground is particularly useful for sensors with zero-volt-centered outputs. In a portable analyzer, four channels could amplify sensor, reference, or feedback signals while maintaining a common operating point.

🏭

Strain-Gauge Signal Conditioning

The LT1014AMJ is suited to strain-gauge signal conditioning because its four precision operational amplifiers can form low-level gain stages while maintaining low offset drift and low noise. A strain bridge produces a small differential voltage, so minimizing input-referred errors helps protect measurement resolution. The low offset-voltage temperature coefficient limits sensitivity to ambient changes, while the high-gain architecture supports the amplification required by instrumentation front ends. Four packaged amplifiers can also support bridge excitation, differential input, gain, and active filtering without requiring four separate packages.

🌡️

Thermocouple Amplifier

The LT1014AMJ can serve as a building block in thermocouple amplification because thermocouple signals are small and require low-offset, low-noise, high-gain signal handling. The device's precision characteristics help reduce errors relative to the millivolt-level sensor output, while its input range extending to ground supports signals near the lower rail. Four circuits allow a designer to implement differential input, gain, filtering, and compensation stages within one package. The complete thermocouple circuit must still include cold-junction compensation and protection appropriate for the sensor and industrial environment.

⚡

4 mA to 20 mA Current-Loop Transmitter

The LT1014AMJ fits 4 mA to 20 mA current-loop transmitter signal conditioning because the manufacturer identifies this application for the LT1014 family. The amplifier's high gain and low offset-voltage temperature coefficient support accurate conditioning of sensor-derived voltages, while low noise and low supply current help preserve the usable loop signal. Four amplifier circuits can provide input amplification, error amplification, output drive assistance, and filtering in a multi-stage transmitter design. The final loop current, compliance voltage, bandwidth, and isolation requirements must be verified against the complete transmitter architecture.

📊

Instrumentation Amplifier

The LT1014AMJ is useful in instrumentation-amplifier designs where a small differential signal must be amplified accurately before digitization or transmission. Its low offset-voltage temperature coefficient limits drift, its high gain supports the required amplification, and its low noise improves the signal-to-noise ratio of the measurement chain. Four amplifier circuits provide flexibility for a classic three-amplifier topology plus an additional buffer or active-filter stage. Input bias current, common-mode range, output swing, and stability at the selected gain must be checked against the sensor source impedance and 5 V or ±15 V operating condition.

🔧

Active Filters and Threshold Detection

The LT1014AMJ supports active-filter and threshold-detection circuits because each of its four precision amplifier channels can implement independent analog functions. The high gain and low offset-voltage temperature coefficient are useful in filters where component tolerances should not dominate the transfer function, while low noise supports low-level condition detection. Multiple limit detectors can be built without multiple packages, simplifying channel count and keeping related circuitry in one thermal environment. Component selection for gain-setting resistors, capacitors, and comparators must preserve the intended passband and switching thresholds.

Ringkasan Produk Disebarkan

LT1014 Same quad precision operational-amplifier family Dipergunakan di: Battery-Powered Precision Instruments, Strain-Gauge Signal Conditioning, 4 mA to 20 mA Current-Loop Transmitter, Instrumentation Amplifier, Active Filters and Threshold Detection LT1014A Related precision operational-amplifier family Dipergunakan di: Battery-Powered Precision Instruments, Thermocouple Amplifier, 4 mA to 20 mA Current-Loop Transmitter, Active Filters and Threshold Detection LT1013 Related precision dual operational-amplifier family Dipergunakan di: Strain-Gauge Signal Conditioning, Thermocouple Amplifier, Instrumentation Amplifier
What is the LT1014AMJ?
The LT1014AMJ is a four-circuit precision operational amplifier from Analog Devices in a 14-pin CERDIP package. According to the manufacturer datasheet, the LT1014 family features low offset-voltage temperature coefficient, high gain, low supply current, and low noise. It supports single 5 V and dual ±15 V supplies, making it suitable for precision instrumentation, signal conditioning, active filtering, and current-loop circuits.
What are the key specifications of LT1014AMJ that engineers should know?
The LT1014AMJ combines four precision operational-amplifier circuits, a 14-pin CERDIP package, support for 5 V single-supply or ±15 V dual-supply operation, and an input range extending to ground. According to the manufacturer datasheet, low offset-voltage temperature coefficient, high gain, low supply current, and low noise are central performance characteristics. These attributes support precision sensor and low-level analog signal conditioning.
Where to download the LT1014AMJ datasheet PDF?
The LT1014AMJ datasheet PDF can be downloaded from the Analog Devices technical-documentation page for the LT1013/LT1014 family. The document contains the family specifications, ordering information, pin relationships, typical performance curves, and application guidance. A separate manufacturer product page also supports LT1014A ordering information, including the LT1014AMJ part-details listing.
Where can I find the LT1014AMJ pinout?
The LT1014AMJ pinout should be taken from the pin-configuration section of the LT1013/LT1014 manufacturer datasheet. The device uses a 14-pin CERDIP configuration with four operational amplifiers. Because the individual terminal names are not reproduced on this page, use the datasheet diagram and pin-description table when assigning PCB tracks or checking power and output connections.
Where can I buy LT1014AMJ online?
The Request a Quote form on this page is the appropriate route for purchasing the exact LT1014AMJ. The form captures the required quantity, packaging preference, and delivery requirements so the order can be reviewed against the requested configuration. It also supports procurement teams that need current commercial confirmation rather than a static catalog listing.
What is the price of LT1014AMJ?
Use the Request a Quote form on this page to request the current LT1014AMJ price and quantity breaks. The form is the appropriate commercial channel because pricing and availability can change with order quantity, package quantity, and market conditions. The same request can include delivery timing and documentation requirements for production planning.
What is the lead time for LT1014AMJ?
Request the current LT1014AMJ lead time through the Request a Quote form on this page. Lead time should be confirmed for the exact ordered MPN, quantity, and delivery destination because component availability and fulfillment schedules may change. Providing a forecast volume and required ship date in the request helps procurement evaluate the most practical supply plan.
Is LT1014AMJ in stock?
Current LT1014AMJ inventory status should be confirmed through the Request a Quote form on this page. The manufacturer lists the LT1014A family as a supported product, while transactional stock can vary by order quantity and package. Submit the required quantity and delivery date to obtain an availability response for the exact part.
What can replace LT1014AMJ?
The LT1014MJB is the closest same-family drop-in candidate identified for the LT1014AMJ because it retains four amplifier circuits and the 14-pin CERDIP configuration. Confirm the exact electrical grade, temperature range, and ordering markings in the manufacturer documentation before substitution. Other listed family variants may differ in grade or temperature designation even when the package and pin count remain unchanged.
Is LT1014AMJ the same as LT1014MJB?
The LT1014AMJ and LT1014MJB share the four-circuit precision-amplifier architecture and 14-pin CERDIP format, but their ordering suffixes can identify different grade or temperature variants. The circuit-count difference is 0 and the pin-count difference is 0. Before replacing one with the other, verify the exact electrical and temperature requirements against the manufacturer part-details pages.
LT1014AMJ vs LT1014CJ - which is better for instrumentation?
Choose LT1014AMJ when its documented grade and temperature characteristics satisfy the instrumentation design; choose LT1014CJ only after confirming that its grade and temperature ratings match the circuit requirements. Both retain four circuits and the 14-pin configuration, so the decisive factors are the suffix-specific operating limits and electrical guarantees rather than the basic amplifier architecture.
When should I choose LT1014AMJ over LT1014MJB?
Choose LT1014AMJ over LT1014MJB when the required temperature range and grade correspond specifically to the AMJ ordering code. Both devices use four precision operational amplifiers in a 14-pin CERDIP package, allowing the same basic board architecture. The decision should be based on the manufacturer ordering table rather than assumed equivalence of the suffix designations.
Is LT1014AMJ suitable for battery-powered instrumentation?
Yes, the LT1014AMJ is suitable for battery-powered precision instrumentation because the LT1014 family is identified for low supply current and single 5 V operation. Its four amplifier circuits can condition several low-level signals in one package, while the input range extending to ground is useful for sensors whose outputs sit near zero volts.
What is the best Force Technologies equivalent for LT1014AMJ?
The FT1014IN is the identified cross-brand candidate for evaluation against the LT1014AMJ because it is listed in a same-family comparison for the four-channel precision operational amplifier. Its 14-pin package and four-channel architecture support drop-in consideration, but designers should verify supply limits, offset, noise, temperature range, and stability in the FT1014IN documentation before production use.
Can LT1014AMJ be used in a 4 mA to 20 mA current-loop transmitter?
Yes, the LT1014AMJ is identified by the manufacturer for 4 mA to 20 mA current-loop transmitter applications. Its low offset-voltage temperature coefficient, high gain, low noise, and low supply current support accurate conditioning of small sensor-derived signals. The transmitter design must still verify the required loop bandwidth, output swing, and supply-current budget.

Data referensi kejuruteraan untuk LT1014AMJ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LT1014AMJ when a four-channel precision amplifier is required in a 14-pin CERDIP package and the design uses either a single 5 V or dual ±15 V supply. Its documented low offset-voltage temperature coefficient, high gain, low noise, low supply current, and input range extending to ground make it appropriate for strain gauges, thermocouples, current-loop transmitters, instrumentation amplifiers, active filters, and threshold detection.

Consider LT1014MJB, LT1014MJ, or LT1014CJ when a documented ordering-code or temperature-grade difference fits the design, but verify the exact limits before substitution. LT1014AMJ#PBF can be evaluated when its ordering and finish code meet the production requirements. FT1014IN is the cross-brand candidate to review when a second-source arrangement is needed. Its basic four-circuit, 14-pin architecture supports drop-in consideration, but its offset, noise, supply, temperature, and stability ratings require direct comparison. For designs needing only two amplifiers, LT1013 offers a different channel count and should be evaluated separately rather than treated as a package-identical replacement.

Perbandingan dengan Gantian

Parametr Produk Ini LT1014MJB LT1014MJ LT1014CJ LT1014AMJ#PBF FT1014IN
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Force Technologies
Package 14-pin CERDIP 14-pin CERDIP 14-pin CERDIP 14-pin CERDIP 14-pin CERDIP 14-pin CERDIP
Amplifier Circuit Count 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

Penyeberangsung Jelas

  • Four precision amplifier circuits in one ceramic-DIP package (vsLT1013)
  • Single 5 V and dual ±15 V supply support (vsFT1014IN)
  • Input operation extending to ground (vsLT1014CJ)
  • Precision features tailored to measurement signals (vsLM224J)

Catatan Desain

Route each amplifier's input, feedback resistor, and compensation network close to the corresponding package pins to minimize parasitic capacitance and interference. Because the LT1014AMJ contains four amplifier circuits in one 14-pin CERDIP package, keep sensitive channels physically separated from noisy power and return paths where possible. Connect supply bypassing close to the device and maintain short, low-impedance ground returns.

Design the power rails for either single 5 V or dual ±15 V operation, as identified by the manufacturer documentation. Confirm input common-mode range and output swing at the selected supply voltage before closing the gain configuration. Decouple the supply pins locally, and avoid allowing input signals to exceed the amplifier's operating limits when supply sequencing is required.

Treat input-bias-current error and source impedance as part of the gain-error budget, especially for strain-gauge and thermocouple circuits whose source impedances can be high. Use the datasheet's input-bias-current and offset specifications to calculate the resulting error. Stable feedback-network component values and short input paths are important when operating at high closed-loop gain.

Do not assume that every LT1014 ordering suffix has identical temperature or grade limits. Before using an LT1014MJB, LT1014MJ, LT1014CJ, LT1014AMJ#PBF, or FT1014IN as a substitute, verify the ordering table, supply limits, common-mode range, output swing, and temperature range. Also confirm that the alternative's stability characteristics meet the selected gain and capacitive-load conditions.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The target is a precision analog operational amplifier; AEC-Q100 qualification is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.

Data disahkan pada: 2026-11-14 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

LT1014AMJ datasheet LT1014AMJ datasheet pdf LT1014AMJ pinout LT1014AMJ equivalent LT1014AMJ replacement LT1014AMJ vs LT1014MJB LT1014AMJ cross reference LT1014AMJ price LT1014AMJ stock Analog Devices LT1014AMJ LT1014AMJ 14 pin CERDIP LT1014AMJ precision op amp LT1014AMJ instrumentation amplifier LT1014AMJ strain gauge amplifier

Komponen dan Tanda berkaitan

Analog Devices LT1014AMJ LT1014MJB LT1014MJ LT1014CJ LT1014AMJ#PBF FT1014IN Force Technologies Texas Instruments precision operational amplifier voltage-feedback amplifier analog amplifier analog integrated circuit semiconductor four-circuit amplifier single-supply operation dual-supply operation 14-pin CERDIP through-hole package low offset voltage high open-loop gain low noise low supply current instrumentation amplifier strain-gauge signal conditioner
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ