Analog Devices

LT1495HS8 - 1.5µA Dual Precision Rail-to-Rail Op Amp | ADI

料号: LT1495HS8 ✓ 量产中
1.5µA per amplifier Vdss 100pA maximum Id 8-SOIC, 0.154 inch / 3.90mm width Package
最小起订量: 1 |

LT1495HS8 概述

The Analog Devices LT1495HS8 is a dual-precision operational amplifier with rail-to-rail input and output operation, a maximum supply current of 1.5µA per amplifier, and an 8-lead SOIC package. It is designed for precision signal-conditioning applications where low quiescent current, low offset voltage, and low input bias current are more important than wide bandwidth. According to the Analog Devices LT1494/LT1495/LT1496 datasheet, input offset voltage is 375µV maximum, typical input offset drift is 0.4µV/°C, input offset current is 100pA maximum, and minimum open-loop gain is 100V/mV. The listed gain-bandwidth product is 2.7kHz, with a slew rate of 0.001V/µs.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LT1495 belongs to the precision op-amp category, the broader linear-amplifier hierarchy, and ultimately the amplifier IC and analog semiconductor product families. Its rail-to-rail input and output characteristics allow useful signal operation near the supply rails, while its very low supply current supports battery-powered instrumentation and low-power measurement systems.

The principal features of the LT1495HS8 include its dual-channel configuration, maximum supply current of 1.5µA, 375µV maximum input offset voltage, 100pA maximum input offset current, and 100V/mV minimum open-loop gain. The 2.7kHz gain-bandwidth product makes the device suitable for slow precision-control and signal-conditioning loops rather than high-speed waveform processing. Its 0.001V/µs slew rate further supports low-frequency, high-resolution measurement circuits.

The LT1495 combines low-power operation with precision-focused DC performance. Offset voltage and offset drift are important when the amplifier follows a sensor output, while low input offset current reduces bias-related errors at high source impedances. The dual configuration allows two precision amplifier channels in one 8-lead SOIC package, reducing board area when compared with two separate single amplifiers. Because the gain-bandwidth product is limited to 2.7kHz, feedback-network selection should favor stable gains and avoid high closed-loop bandwidth requirements.

Typical applications include low-power sensor conditioning, precision current measurement, battery-operated instrumentation, low-frequency active filters, and slow closed-loop control. In these systems, the LT1495 can amplify small sensor or error-amplifier signals while consuming no more than the family-level 1.5µA maximum supply current. Designers should also consider whether the 2.7kHz bandwidth is sufficient for the required settling time and signal bandwidth.

A key design consideration is to verify the common-mode and output-voltage limits against the intended supply voltage and signal range. Feedback-component values should also be selected to support stable operation at the target closed-loop gain. If a design requires substantially faster settling, higher slew rate, or lower offset than this device provides, an alternative amplifier family may be more appropriate.

This product record combines the manufacturer’s family specifications with package, application, pinout, and drop-in-replacement guidance. It also identifies where procurement, technical comparison, and circuit-implementation decisions require additional engineering review.

直接替换替代料: LT1495HS8 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

LT1495HS8 最大额定值与电气特性

Number of Amplifiers 2 circuits
Amplifier Type General-purpose precision operational amplifier
Maximum Supply Current 1.5µA per amplifier
Input Offset Voltage 375µV maximum
Input Offset Voltage Drift 0.4µV/°C typical
Input Offset Current 100pA maximum
Minimum Open-Loop Gain 100V/mV
Gain-Bandwidth Product 2.7kHz
Slew Rate 0.001V/µs
Input Common-Mode Range Rail-to-rail input
Output Range Rail-to-rail output
封装 8-SOIC, 0.154 inch / 3.90mm width
安装类型 Surface mount
Product Page Packaging Option Tube
Lead Finish Matte tin (Sn)
RoHS 状态 ROHS3Compliant

LT1495HS8 引脚配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
引脚 1 OUT A — Output of amplifier A
引脚 2 −IN A — Inverting input of amplifier A
引脚 3 +IN A — Non-inverting input of amplifier A
引脚 4 V− — Negative supply connection
引脚 5 +IN B — Non-inverting input of amplifier B
引脚 6 −IN B — Inverting input of amplifier B
引脚 7 OUT B — Output of amplifier B
引脚 8 V+ — Positive supply connection

典型应用

LT1495HS8 适用于 6 应用s: Battery-Powered Sensor Signal Conditioning, Precision Current Measurement, Precision Data-Acquisition Front End, Low-Power Active Filtering, Battery-Operated Instrumentation, Precision Reference Buffering.

🧩

Battery-Powered Sensor Signal Conditioning

The LT1495HS8 fits low-energy sensor front ends because the LT1495 family operates with no more than 1.5µA supply current per amplifier while providing rail-to-rail input and output operation. Both channels can condition a differential sensor output and buffer a reference or auxiliary signal. The 375µV maximum input offset voltage and 100pA maximum input offset current help control DC error, although the 2.7kHz gain-bandwidth product limits the design to signals whose bandwidth and settling requirements remain compatible with that value.

🏭

Precision Current Measurement

The LT1495HS8 can amplify the small voltage generated by a current shunt or current-sense transducer in a precision measurement system. Its input offset current is specified at no more than 100pA, helping limit bias error at high source impedance, while the minimum open-loop gain of 100V/mV supports accurate closed-loop operation. The dual package can provide one sensing amplifier and one reference or output buffer. With a 2.7kHz gain-bandwidth product and 0.001V/µs slew rate, the circuit is best suited to relatively slow measurements rather than high-frequency transients.

📟

Precision Data-Acquisition Front End

The LT1495HS8 is useful as a low-power differential input stage ahead of a high-resolution converter in a portable data-acquisition system. Rail-to-rail input operation permits operation near the available supply range, and the 375µV maximum offset voltage helps preserve the integrity of small sensor-derived signals. Two channels can condition differential inputs or buffer a common reference. Because bandwidth is limited to 2.7kHz, the application should avoid demanding rapid settling or wide-bandwidth noise performance beyond the amplifier’s operating range.

⚡

Low-Power Active Filtering

The LT1495HS8 can implement first-order or modest-bandwidth active filters in low-frequency measurement systems. Its maximum supply current of 1.5µA per amplifier reduces the contribution of the active stage to total system power, while the 2.7kHz gain-bandwidth product gives designers a concrete upper reference for usable closed-loop bandwidth. The rail-to-rail output characteristic can improve dynamic range in low-voltage systems. Filter Q and frequency should be selected conservatively so that phase margin and settling behavior remain acceptable at the highest intended operating frequency.

🔬

Battery-Operated Instrumentation

The LT1495HS8 supports portable instrumentation that must balance measurement accuracy against energy use. A 1.5µA maximum supply current per amplifier is central to this fit, while 375µV maximum input offset voltage, 0.4µV/°C typical drift, and 100pA maximum input offset current support precision DC measurements. The dual 8-SOIC configuration integrates two channels without requiring two separate packages. Engineers should verify supply range and common-mode limits in the final circuit and avoid applications requiring bandwidth beyond the 2.7kHz gain-bandwidth product.

📐

Precision Reference Buffering

The LT1495HS8 can buffer a low-current reference or provide gain in a precision reference-control loop where the ultra-low 1.5µA supply-current limit is valuable. The minimum open-loop gain of 100V/mV helps reduce closed-loop gain error, and rail-to-rail output operation supports wider usable output range in low-voltage systems. One channel may buffer the reference while the other provides error amplification or an output stage. Care is required because the 2.7kHz bandwidth and 0.001V/µs slew rate limit transient response and reference settling speed.

What is the LT1495HS8?
The LT1495HS8 is a dual, low-power precision operational amplifier with rail-to-rail input and output operation in an 8-lead SOIC package. According to the Analog Devices LT1494/LT1495/LT1496 datasheet, each amplifier has a maximum supply current of 1.5µA, a maximum input offset voltage of 375µV, and a typical offset drift of 0.4µV/°C. It is intended for precision, low-frequency signal-conditioning systems where power consumption and DC accuracy are the principal priorities.
What are the key specifications of LT1495HS8 that engineers should know?
The LT1495HS8 combines two amplifier channels, rail-to-rail input and output operation, a 1.5µA maximum supply current per amplifier, and a 2.7kHz gain-bandwidth product. The Analog Devices family datasheet also specifies 375µV maximum input offset voltage, 100pA maximum input offset current, a 0.4µV/°C typical offset drift, and a minimum open-loop gain of 100V/mV. These figures define it as a precision, slow, ultra-low-power amplifier rather than a high-speed op amp.
Where to buy LT1495HS8 online?
The LT1495HS8 can be requested through XAIPART’s Request a Quote form on this page for current commercial terms, stock confirmation, and lead-time information. The exact LT1495HS8 order code is an 8-lead SOIC device, while the separately listed LT1495HS8#TR is a tape-and-reel order variant. Confirm the required package and shipping configuration before ordering so the manufacturer ordering code remains unambiguous.
What is the price of LT1495HS8?
The current commercial price for the LT1495HS8 should be obtained through XAIPART’s Request a Quote form on this page. The form allows the exact MPN, quantity, package configuration, and delivery requirements to be reviewed before an order is placed. The target part is the LT1495HS8 8-lead SOIC order code; packaging-specific suffixes such as #TR should not be substituted without confirming the intended shipment format.
What is the lead time for LT1495HS8?
The current lead time for the LT1495HS8 should be confirmed through XAIPART’s Request a Quote form on this page. Lead time can vary with order quantity, package configuration, and manufacturing availability, so a quantity-specific confirmation is more useful than a generic estimate. The LT1495HS8 is the tube-packaged order code, whereas LT1495HS8#TR identifies the separate tape-and-reel ordering option.
Is LT1495HS8 in stock?
Current stock status for the LT1495HS8 should be confirmed through XAIPART’s Request a Quote form on this page. The available quantity can change with order size and packaging requirements, so purchasing teams should include their required quantity and delivery date in the request. This avoids confusing the LT1495HS8 tube configuration with the distinct LT1495HS8#TR tape-and-reel order code.
LT1495HS8 vs LT1495HS8#TR - which ordering code should I use?
The LT1495HS8 and LT1495HS8#TR identify the same dual LT1495 amplifier family in the same 8-SOIC package, with the suffix primarily distinguishing the ordering format. The verified product information identifies LT1495HS8 with tube packaging and LT1495HS8#TR with tape-and-reel packaging. Both retain the 1.5µA maximum supply current, 2.7kHz gain-bandwidth product, and 0.001V/µs slew rate, but the receiving equipment should be matched to the chosen shipping format.
When should I choose LT1495HS8 instead of LT1494 or LT1496?
Choose the LT1495HS8 when the design requires two precision amplifier channels in one 8-lead SOIC package. The Analog Devices family naming distinguishes LT1494 as the single-amplifier version, LT1495 as the dual version, and LT1496 as the quad version. The LT1495HS8 is therefore appropriate when two low-power precision channels are needed and an 8-pin footprint is available, while another family member may be preferable when the required channel count differs.
Is LT1495HS8 suitable for battery-powered sensor conditioning?
The LT1495HS8 is suitable for many battery-powered sensor-conditioning circuits because its family specification limits supply current to 1.5µA per amplifier. Its rail-to-rail input and output behavior also helps preserve usable signal range near the supply limits. The designer should still confirm that the sensor output, supply voltage, input bias requirements, and target noise performance fall within the device’s operating limits before finalizing the circuit.
Can LT1495HS8 be used for low-frequency active filters?
The LT1495HS8 can be used for low-frequency active filters when the filter bandwidth is compatible with its 2.7kHz gain-bandwidth product and 0.001V/µs slew rate. Its low offset voltage and low supply current are useful for precision measurement channels. High-Q filters, fast settling requirements, or signal content extending toward the gain-bandwidth limit may require a faster amplifier with more phase margin and greater bandwidth.
What is the best drop-in replacement for LT1495HS8?
No independently verified pin-compatible drop-in replacement for the LT1495HS8 is identified in the available cross-reference information. The LT1495HS8#TR has the same electrical device in a tape-and-reel order format, but it is a packaging variant rather than an engineering alternative. Before accepting a replacement, require the candidate to provide the same 8-SOIC pinout, dual-channel rail-to-rail behavior, 1.5µA-class supply current, and compatible offset, bandwidth, slew-rate, and common-mode specifications.
What can replace LT1495HS8?
The LT1495HS8 should be replaced only with a device that matches its 8-SOIC footprint, dual-channel pinout, supply-voltage range, rail-to-rail input and output performance, and low-power precision specifications. The verified cross-reference material does not establish a qualifying drop-in substitute. A sensible engineering process is to compare the maximum supply current against 1.5µA per amplifier, offset voltage against 375µV, gain-bandwidth product against 2.7kHz, and slew rate against 0.001V/µs.
Is LT1495HS8 the same as LT1495HS8#PBF?
The LT1495HS8 and LT1495HS8#PBF refer closely related ordering forms of the dual LT1495 amplifier in an 8-SOIC package, while LT1495HS8#TR denotes the tape-and-reel ordering option. The #PBF form is associated with a matte-tin lead finish and a lead-free ordering designation. Engineers should verify the exact suffix on the purchase order because package, tape-and-reel status, and order code can differ among the listed forms.
What is the best Analog Devices equivalent for LT1495HS8?
The closest Analog Devices ordering match is the LT1495HS8#PBF, which represents the same dual LT1495 family in an 8-SOIC format with a matte-tin lead finish. The LT1495HS8#TR is also an ordering option for the same underlying device in tape-and-reel format. These are order-code alternatives rather than distinct amplifier designs, so no electrical performance change should be assumed without confirming the manufacturer’s ordering-information table.
Where to download the LT1495HS8 datasheet PDF?
The official LT1495HS8 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/149456fb.pdf. The document covers the LT1494/LT1495/LT1496 single, dual, and quad precision rail-to-rail input/output op-amp family. Use its ordering information, electrical-characteristics table, pin descriptions, and package drawings when confirming the exact LT1495HS8 configuration.
Where can I find the LT1495HS8 pinout?
The LT1495HS8 pinout is shown in the pin-description and package-drawing sections of the official Analog Devices LT1494/LT1495/LT1496 datasheet. The device is an 8-lead SOIC with two operational-amplifier channels. Use the datasheet’s numbered package drawing when assigning each input, output, supply, and ground connection, and observe the standard pin-1 orientation mark before laying out the PCB footprint.

工程参考数据: LT1495HS8 ——对比、设计指导和合规信息。

选型指南

Choose the LT1495HS8 for low-frequency precision signal-conditioning designs that need two amplifier channels, rail-to-rail input and output operation, and very low supply current. Its maximum supply current of 1.5µA per amplifier, 375µV maximum offset voltage, and 100pA maximum input offset current make it particularly useful for battery-powered sensor interfaces, precision current measurement, and low-power active filters. The 2.7kHz gain-bandwidth product and 0.001V/µs slew rate are important constraints: they suit slow measurement and control loops but not high-speed acquisition, audio, or fast settling. If the system instead needs higher bandwidth, lower noise, or greater output drive, select a different amplifier family even if it shares the 8-SOIC format. For an exact drop-in replacement, require identical pin assignments and verified compatibility across supply voltage, common-mode range, output swing, offset, bias current, stability, and temperature range.

与替代料对比

参数 本产品
Package 8-SOIC, 0.154 inch / 3.90mm width
Brand Analog Devices
Number of Amplifiers 2 circuits
Amplifier Type General-purpose precision operational amplifier
Maximum Supply Current 1.5µA per amplifier
Input Offset Voltage 375µV maximum
Input Offset Voltage Drift 0.4µV/°C typical
Input Offset Current 100pA maximum
Minimum Open-Loop Gain 100V/mV
Gain-Bandwidth Product 2.7kHz
Slew Rate 0.001V/µs
Input and Output Range Rail-to-rail input and output

关键差异点

  • Ultra-low supply current with dual precision channels (对比 General-purpose dual rail-to-rail op amps)
  • Input offset voltage suitable for precision DC conditioning (对比 Higher-bandwidth general-purpose dual op amps)
  • Very low input bias current (对比 CMOS input dual amplifier families with higher bias-current floors)

设计说明

Do not treat the 1.5µA family specification as sufficient to guarantee usable signal bandwidth. The 2.7kHz gain-bandwidth product and 0.001V/µs slew rate make the LT1495HS8 appropriate for slow precision loops, not wide-band signal chains. Check the required settling interval, closed-loop gain, output amplitude, and load before committing to the amplifier. A request for higher speed should trigger selection of a faster amplifier family rather than compensation or oversizing of the LT1495 circuit.

Use the official 8-SOIC pin drawing and preserve the package pin-1 orientation when laying out the PCB. Place each amplifier’s input-network connections close to pins 2, 3, 5, and 6, keep output routing away from sensitive input traces, and connect the supply pins to short, low-impedance paths. Although the circuit consumes little power, long supply traces and poor grounding can degrade measured accuracy by adding series resistance and coupling external noise into the high-impedance signal path.

Calculate bias-current error from the specified 100pA maximum input offset current and the effective source impedance at each input. This is especially important for high-impedance sensors because even a small current can create a meaningful error voltage. Resistor values in the feedback network should remain high enough to preserve low input bias current benefits while remaining low enough to avoid excessive thermal noise and leakage susceptibility. Keep the two amplifier channels physically separated from switching nodes and noisy digital return paths.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Yes
无卤
Unknown
冲突矿物
Unknown

The LT1495HS8#PBF ordering form is identified as ROHS3Compliant and uses a matte-tin lead finish. REACH, halogen-free, and conflict-minerals status are not stated.

相关搜索

LT1495HS8 datasheet LT1495HS8 pinout LT1495HS8 datasheet pdf LT1495HS8 equivalent LT1495HS8 replacement LT1495HS8 drop-in substitute LT1495HS8 vs LT1495HS8#TR Analog Devices LT1495HS8 LT1495HS8 8-SOIC LT1495HS8 1.5µA op amp LT1495HS8 rail-to-rail amplifier LT1495HS8 sensor conditioning LT1495HS8 price LT1495HS8 stock where to buy LT1495HS8

相关元器件 & 术语

Analog Devices LT1495HS8 LT1495HS8#TR LT1495HS8#PBF LT1494 LT1495 LT1496 operational amplifier precision operational amplifier dual amplifier analog amplifier IC rail-to-rail input rail-to-rail output low-power amplifier 8-SOIC SOIC family surface-mount package maximum supply current input offset voltage input offset current open-loop gain gain-bandwidth product slew rate sensor signal conditioning precision current measurement
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情