Maxim Integrated

MAX308ESE+ 8:1 100Ω CMOS Analog Multiplexer | Maxim

料号: MAX308ESE+ ✓ 量产中
Less than 100 ohm Rds(on) 16-SOIC Package
最小起订量: 1 |

MAX308ESE+ 概述

The Maxim Integrated MAX308ESE+ is a precision, 8-channel single-ended CMOS analog multiplexer with less than 100Ω on-resistance, channel matching within 5Ω, and on-resistance variation of 7Ω maximum over the specified analog signal range. The device is housed in a 16-SOIC package and supports bidirectional analog channels. According to the manufacturer’s product page, MAX308 production status is listed as production.

An analog multiplexer is an interface IC that connects one shared signal path to one of several selectable inputs. A CMOS analog switch uses controlled transistors to route low-voltage analog signals while presenting high impedance to unselected channels. The MAX308 belongs to the family hierarchy of analog multiplexers, CMOS analog switches, interface ICs, and semiconductors. Its eight inputs can be selected individually by digital address and enable controls.

Key characteristics include an 8-channel configuration, on-resistance below 100Ω, channel-to-channel matching within 5Ω, and relatively flat resistance across the specified analog range. The maximum stated variation is 7Ω. These characteristics make the multiplexer useful when a precision measurement system, data-acquisition circuit, or analog signal router must select among multiple inputs while limiting channel-dependent errors.

The MAX308 family supports both 8-channel and dual 4-channel operating arrangements. Digital address inputs determine the active path, while enable and shutdown controls support system-level routing and power management. Because the switch channels are bidirectional, the same device architecture can be used for signal routing rather than only one-way source selection. Exact logic levels, leakage, switching-time limits, supply range, and channel-breakdown ratings should be confirmed in the manufacturer data sheet before final circuit design.

Typical applications include multiplexed sensor acquisition, precision analog measurement, laboratory test equipment, data-acquisition systems, and industrial control modules. In these systems, the multiplexer reduces the number of dedicated analog input channels required at the host processor or converter. The low and closely matched on-resistance helps maintain consistent signal attenuation from one selected channel to another.

PCB implementation should keep the mux pins, analog traces, and connector or sensor returns short to minimize parasitic capacitance and coupling. Supply bypassing must follow the manufacturer’s recommended layout and capacitance values. Signal amplitudes should remain within the device’s specified common-mode and analog input ranges; excessive voltage can damage the internal CMOS switches even if the selected channel is not conducting.

This page organizes the confirmed MAX308ESE+ electrical facts, sourcing information, package characteristics, and verified same-package alternatives into an engineering-focused format. It also identifies which detailed characteristics still require confirmation from the MAX308 family data sheet before layout or qualification is complete.

直接替换替代料: MAX308ESE+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MAX308ESE

✅ 直接替换
📦 16-SOIC
Same 8:1 architecture, less-than-100-ohm on-resistance, and within-5-ohm channel matching; no verified electrical difference was stated

📋 参考替代料(不在目录中)

MAX308CSE+

✅ 直接替换
📦 16-SOIC
Same 8:1 architecture and 16-SOIC package, but the commercial 0 °C to +70 °C range is 40 °C narrower at the cold limit and 15 °C narrower at the hot limit than -40 °C to +85 °C

📋 参考替代料(不在目录中)

MAX308ESE+ 规格参数

Product Type Precision CMOS analog multiplexer
Multiplexer Configuration 8:1 single-ended or dual 4-channel
Number of Channels 8 channels
On-Resistance Less than 100 ohm
On-Resistance Matching Between Channels Within 5 ohm
On-Resistance Variation Over Analog Signal Range 7 ohm maximum
Signal Direction Bidirectional analog channels
Process Technology CMOS
封装 16-SOIC
安装类型 Surface mount
工作温度范围 -40 °C to +85 °C
Production Status Production

MAX308ESE+ 16-soic 引脚配置指南

MAX308ESE+(16-soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MAX308ESE+ 的 16-soic 封装引脚图

暂无详细引脚数据: MAX308ESE+.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MAX308ESE+ 适用于 6 应用s: Multiplexed Sensor Signal Acquisition, Precision Data-Acquisition Systems, Industrial Control Signal Routing, Laboratory Test Equipment, Battery-Powered Measurement Products, Audio and Communication Test Routing.

🧩

Multiplexed Sensor Signal Acquisition

The MAX308ESE+ fits sensor-frontend designs that must scan several analog inputs while sharing one measurement chain. Its 8:1 configuration connects one of eight sensors to a downstream amplifier or converter, while less-than-100Ω on-resistance keeps the switch contribution to loading relatively low. The within-5Ω matching between channels and 7Ω maximum variation over the specified analog range help preserve channel consistency. Bidirectional channels also permit reuse in test or switching arrangements. Confirm that sensor outputs remain within the family’s specified common-mode and analog ranges, and place the mux close enough to the analog source to minimize trace coupling.

📊

Precision Data-Acquisition Systems

The MAX308ESE+ can reduce analog input-pin count in a multiplexed data-acquisition system by routing eight single-ended inputs toward one processing channel. Its less-than-100Ω on-resistance is suitable when the selected signal feeds a higher-impedance amplifier, while channel matching within 5Ω limits systematic differences between measurements taken on different inputs. The device also supports a dual 4-channel configuration when separate signal groups are more convenient. Designers should verify settling behavior, off-isolation, crosstalk, charge injection, and acquisition timing against the MAX308 family data sheet before using it for high-resolution measurements.

🏭

Industrial Control Signal Routing

The MAX308ESE+ is appropriate for industrial control boards that need to route low-level analog command or feedback signals among shared processing resources. Its industrial temperature rating of -40 °C to +85 °C supports equipment exposed to wider enclosure temperatures than a 0 °C to +70 °C commercial-grade switch. The 8-channel configuration provides useful routing density without requiring eight separate analog switch packages. Bidirectional operation supports both source selection and signal-path switching. Protection against industrial transients should be implemented separately if the selected input can receive cable-borne surges, and the system should not exceed the family’s stated signal limits.

🔧

Laboratory Test Equipment

The MAX308ESE+ fits programmable and laboratory test equipment that must connect several test points to one measurement instrument. Eight selectable inputs can be routed through the multiplexer, while the precision-oriented on-resistance characteristics help reduce channel-dependent attenuation. Bidirectional channels are useful when a fixture needs to select a DUT connection rather than merely choose an input source. For high-accuracy measurements, calculate the total source resistance, account for the mux contribution, and verify settling time after each address change. Keep sensitive analog routing compact and use a ground-return arrangement that minimizes coupling from digital address and enable lines.

🔋

Battery-Powered Measurement Products

The MAX308ESE+ can fit battery-powered instruments where a dedicated analog front end for every input would be impractical. Consolidating up to eight single-ended inputs behind one multiplexer reduces board area and can simplify the analog signal path. The device’s less-than-100Ω on-resistance provides a defined loading term to include in the sensor or source-impedance budget. Low-voltage operation and quiescent-current requirements must be checked in the MAX308 family data sheet before using the mux as the primary system power strategy. Rail-to-rail signal compatibility, leakage into high-impedance sensors, and shutdown behavior are particularly important in portable measurement equipment.

🌐

Audio and Communication Test Routing

The MAX308ESE+ can route low-level analog test signals in audio, communications, and interface test modules that require several sources to reach a common measurement path. Its 8:1 topology provides broad source selection, while the bidirectional channel characteristic allows the device to be used where signal flow may need to change according to test direction. The sub-100Ω on-resistance should be compared with the source and load impedances to determine the actual attenuation introduced by the selected path. For high-frequency or precision audio measurements, confirm bandwidth, off-isolation, crosstalk, and switching-time specifications rather than assuming performance beyond the published signal range.

推荐产品汇总

MAX308ESE+ Maxim Integrated 用于: Multiplexed Sensor Signal Acquisition, Precision Data-Acquisition Systems, Industrial Control Signal Routing, Laboratory Test Equipment, Battery-Powered Measurement Products, Audio and Communication Test Routing MAX308CSE+ Same-family commercial-temperature option 用于: Multiplexed Sensor Signal Acquisition, Industrial Control Signal Routing, Audio and Communication Test Routing MAX308ESE Same-family multiplexer option 用于: Precision Data-Acquisition Systems, Laboratory Test Equipment MAX308ESE+T Tape-and-reel assembly option 用于: Battery-Powered Measurement Products
What is the MAX308ESE+ used for?
The MAX308ESE+ is an 8-channel, single-ended CMOS analog multiplexer used to route one of eight analog inputs to a shared output. According to the Analog Devices MAX308 product information, it also supports a dual 4-channel arrangement and provides bidirectional channels. Its sub-100Ω on-resistance and matching within 5Ω make it suitable for precision measurement, data acquisition, and controlled analog-signal routing.
What are the key specifications of MAX308ESE+ that engineers should know?
The MAX308ESE+ combines an 8-channel multiplex function, less than 100Ω on-resistance, on-resistance matching within 5Ω between channels, and 7Ω maximum resistance variation over the specified analog signal range. It is a precision monolithic CMOS device in a 16-SOIC package. These figures come from the Analog Devices MAX308 family description and are the principal parameters to compare when evaluating channel accuracy and signal attenuation.
Where can I download the MAX308ESE+ datasheet PDF?
The MAX308ESE+ data sheet is available through the official Analog Devices MAX308 product page at analog.com, which links the family data sheet, selection table, and documentation. The family document is identified as Revision 2. Use the pin-description table and electrical-characteristics tables from that document when assigning PCB nets, checking logic levels, and confirming the analog and power-supply limits.
Where can I find the MAX308ESE+ pinout?
The MAX308ESE+ uses a 16-SOIC package, and its authoritative pin assignment is shown in the pin-description table of the Analog Devices MAX308 family data sheet. Use the official product page to access the document, then map address, enable, shutdown, common, and channel pins exactly as shown. The search result confirms the 16-SOIC package but does not expose a complete numbered pin list.
Is MAX308ESE+ suitable for precision sensor acquisition?
Yes, the MAX308ESE+ is suitable for precision sensor acquisition when the sensor signals remain inside the MAX308 family’s specified analog range and bandwidth. Its on-resistance is below 100Ω, channel matching is within 5Ω, and resistance variation across the specified analog range is 7Ω maximum. Those characteristics help minimize input-dependent errors while one of eight sensor channels is routed to the measurement or conversion circuitry.
How does MAX308ESE+ differ from MAX308ESE?
MAX308ESE+ and MAX308ESE identify the same MAX308 8-channel CMOS multiplexer family and are both associated with the 16-SOIC configuration. The manufacturer family information confirms 8-channel or dual 4-channel operation, on-resistance below 100Ω, matching within 5Ω, and 7Ω maximum variation. The plus suffix identifies the orderable MAX308ESE+ designation, but individual ordering codes should be checked in the manufacturer selection table before substitution.
MAX308ESE+ vs MAX308CSE+ — which is better for industrial equipment?
Choose MAX308ESE+ when the circuit must operate across -40 °C to +85 °C; choose MAX308CSE+ when the commercial 0 °C to +70 °C range is sufficient. Both devices are associated with the MAX308 precision CMOS multiplexing family, but their temperature grades differ by 40 °C at the cold limit and 15 °C at the hot limit. The wider grade is generally safer for temperature-variable industrial environments.
When should I choose MAX308ESE+ over MAX308CSE+?
Select MAX308ESE+ when the enclosure can reach temperatures below 0 °C or above 70 °C, since its stated operating range is -40 °C to +85 °C. MAX308CSE+ remains appropriate for room-temperature commercial equipment within 0 °C to +70 °C. Beyond temperature grade, verify supply voltage, logic thresholds, leakage, switching time, and lifecycle requirements because those characteristics should not be inferred from the family description alone.
What can replace MAX308ESE+?
A valid MAX308ESE+ replacement must preserve the 16-SOIC footprint, pin assignments, address and enable logic, channel count, and approximately less-than-100Ω on-resistance behavior. MAX308ESE and MAX308CSE+ are the closest confirmed family options, while MAX308ESE+T is primarily a tape-and-reel ordering option. Use the Request a Quote form on this page when you need help confirming current availability and exact-ordering-code details.
Is MAX308ESE+ the same as MAX308ESE+T?
MAX308ESE+ and MAX308ESE+T refer to the same MAX308 16-SOIC device family, but the T suffix identifies a tape-and-reel shipping option rather than a different electrical function. They should therefore not be treated as independent drop-in alternatives with different performance. Confirm reel orientation, quantity, and the exact suffix against your assembly requirements before placing an order.
What is the best drop-in replacement for MAX308ESE+?
MAX308ESE is the closest confirmed drop-in candidate because it uses the same MAX308 family and 16-SOIC configuration with the same stated 8-channel architecture, less-than-100Ω on-resistance, and within-5Ω channel matching. MAX308CSE+ offers the same package but a narrower 0 °C to +70 °C temperature grade. A true cross-brand replacement requires exact pin, logic, voltage, and analog-range verification before substitution.
Where to buy MAX308ESE+ online?
Use the Request a Quote form on this page to request MAX308ESE+ availability, current lead time, and an order quote. The form allows the request to be tied to the exact 16-SOIC MAX308ESE+ ordering code, reducing the risk of confusing it with MAX308CSE+ or the tape-and-reel MAX308ESE+T variant. For design work, obtain the current manufacturer data sheet before releasing the PCB layout.
What is the price of MAX308ESE+?
Use the Request a Quote form on this page for the current MAX308ESE+ price, quantity breaks, and stock status. Pricing for a specific analog multiplexer can vary with order quantity, packaging, and market conditions, so a static figure should not be used for budgeting. The request should identify MAX308ESE+ specifically, not MAX308ESE+T, MAX308CSE+, or a higher-channel-count family member.
What is the lead time for MAX308ESE+?
The current lead time for MAX308ESE+ should be requested through the Request a Quote form on this page. Include the required quantity, 16-SOIC package preference, tube or tape-and-reel handling requirements, and production schedule. The manufacturer lists the MAX308 family in production, but a project-specific delivery commitment should be confirmed before the purchasing deadline.
Is MAX308ESE+ in stock?
Request current MAX308ESE+ inventory and lead-time confirmation through the Request a Quote form on this page. The form should state the exact MAX308ESE+ suffix and required order quantity so that the response reflects the requested orderable configuration. The Analog Devices product page identifies the MAX308 family as production, while project-specific stock can change with order mix and packaging needs.

工程参考数据: MAX308ESE+ ——对比、设计指导和合规信息。

选型指南

Choose MAX308ESE+ when the design needs an 8-channel precision CMOS multiplexer in a 16-SOIC package and must operate from -40 °C to +85 °C. MAX308ESE is the closest confirmed same-package option when its exact ordering status and temperature specification meet the design requirements. Choose MAX308CSE+ only when its 0 °C to +70 °C commercial range covers the enclosure environment and the remaining electrical limits have been verified. No cross-brand drop-in replacement is identified because equivalent pin assignments, logic thresholds, supply range, leakage, and switching characteristics were not confirmed. Before ordering any substitute, compare the complete manufacturer pin and electrical tables and verify the exact ordering suffix, particularly when distinguishing tube, tape-and-reel, and temperature-grade variants.

与替代料对比

参数 本产品 MAX308ESE MAX308CSE+
Brand Maxim Integrated Maxim Integrated Maxim Integrated
Package 16-SOIC 16-SOIC 16-SOIC
Product Type Precision CMOS analog multiplexer Precision CMOS analog multiplexer MAX308 family precision CMOS analog multiplexer

关键差异点

  • Maintains channel consistency with closely matched on-resistance (对比 MAX308ESE)
  • Broader temperature range than the commercial family option (对比 MAX308CSE+)
  • Eight-channel routing in a 16-SOIC package (对比 MAX308ESE)

设计说明

Route the selected analog path directly between the MAX308ESE+ channel pins and the receiving analog circuit. Keep address and enable traces away from sensitive common and channel nodes, use a continuous ground reference beneath the package where practical, and avoid sharing narrow return paths with high-current switching circuits. Short traces reduce parasitic capacitance and coupling, both of which can affect settling after an address change.

Include the maximum selected-channel on-resistance in the complete source-impedance calculation. Estimated source-path attenuation for a 100Ω mux resistance driving a 10kΩ load is approximately 0.99%, but the real result also includes connector, resistor, and protection-device resistance. Use the manufacturer’s lower-bound and maximum on-resistance values to establish worst-case gain error rather than relying on a nominal 100Ω figure.

Do not select MAX308CSE+ as a temperature-equivalent replacement for MAX308ESE+ in equipment operating below 0 °C or above 70 °C. The commercial-grade candidate is 40 °C narrower at the cold limit and 15 °C narrower at the hot limit. Likewise, MAX308ESE+T is a tape-and-reel ordering option rather than a distinct electrical upgrade, so its reel format and assembly process must be checked separately.

Place the bypass capacitor required by the MAX308 family layout guidance close to the supply and ground pins, and provide an uninterrupted ground return for the analog signals. Do not add an arbitrary large capacitor directly across switched nodes without checking the family’s switching-time and charge-injection characteristics. The large capacitor can lengthen settling intervals and alter the behavior of a precision measurement path.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available manufacturer description confirms a production-status MAX308 family but does not provide explicit RoHS, REACH, halogen-free, conflict-minerals, or automotive-qualification statements. AEC-Q100 is not applicable because this is an analog interface IC rather than an automotive-qualified device.

数据核验日期: 2026-11-18 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MAX308ESE+ datasheet MAX308ESE+ pinout MAX308ESE+ datasheet pdf MAX308ESE+ equivalent MAX308ESE+ replacement MAX308ESE+ cross reference MAX308ESE+ vs MAX308CSE+ MAX308ESE+ price MAX308ESE+ stock Maxim Integrated MAX308ESE+ MAX308 8 channel CMOS multiplexer MAX308ESE+ 16 SOIC MAX308ESE+ sensor acquisition MAX308ESE+ analog switch application circuit what is MAX308ESE+ used for

相关元器件 & 术语

Maxim Integrated Analog Devices MAX308ESE+ MAX308ESE MAX308CSE+ MAX308ESE+T CMOS analog multiplexer analog switch precision multiplexer 8:1 multiplexer dual 4-channel multiplexer bidirectional analog channel on-resistance channel matching 16-SOIC SOIC package family surface-mount package industrial electronics sensor acquisition data-acquisition system laboratory test equipment analog signal routing bidirectional switching RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情