MAX308ESE+ 8:1 100Ω CMOS Analog Multiplexer | Maxim
MPN: MAX308ESE+ ✓ 啟用中MAX308ESE+ 概覽
An analog multiplexer is an interface IC that connects one shared signal path to one of several selectable inputs. A CMOS analog switch uses controlled transistors to route low-voltage analog signals while presenting high impedance to unselected channels. The MAX308 belongs to the family hierarchy of analog multiplexers, CMOS analog switches, interface ICs, and semiconductors. Its eight inputs can be selected individually by digital address and enable controls.
Key characteristics include an 8-channel configuration, on-resistance below 100Ω, channel-to-channel matching within 5Ω, and relatively flat resistance across the specified analog range. The maximum stated variation is 7Ω. These characteristics make the multiplexer useful when a precision measurement system, data-acquisition circuit, or analog signal router must select among multiple inputs while limiting channel-dependent errors.
The MAX308 family supports both 8-channel and dual 4-channel operating arrangements. Digital address inputs determine the active path, while enable and shutdown controls support system-level routing and power management. Because the switch channels are bidirectional, the same device architecture can be used for signal routing rather than only one-way source selection. Exact logic levels, leakage, switching-time limits, supply range, and channel-breakdown ratings should be confirmed in the manufacturer data sheet before final circuit design.
Typical applications include multiplexed sensor acquisition, precision analog measurement, laboratory test equipment, data-acquisition systems, and industrial control modules. In these systems, the multiplexer reduces the number of dedicated analog input channels required at the host processor or converter. The low and closely matched on-resistance helps maintain consistent signal attenuation from one selected channel to another.
PCB implementation should keep the mux pins, analog traces, and connector or sensor returns short to minimize parasitic capacitance and coupling. Supply bypassing must follow the manufacturer’s recommended layout and capacitance values. Signal amplitudes should remain within the device’s specified common-mode and analog input ranges; excessive voltage can damage the internal CMOS switches even if the selected channel is not conducting.
This page organizes the confirmed MAX308ESE+ electrical facts, sourcing information, package characteristics, and verified same-package alternatives into an engineering-focused format. It also identifies which detailed characteristics still require confirmation from the MAX308 family data sheet before layout or qualification is complete.
直接替換替代品,適用於 MAX308ESE+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
MAX308ESE
✅ 直接替換📋 參考替代品(不在目錄中)
MAX308CSE+
✅ 直接替換📋 參考替代品(不在目錄中)
MAX308ESE+ 規格
| Product Type | Precision CMOS analog multiplexer |
| Multiplexer Configuration | 8:1 single-ended or dual 4-channel |
| Number of Channels | 8 channels |
| On-Resistance | Less than 100 ohm |
| On-Resistance Matching Between Channels | Within 5 ohm |
| On-Resistance Variation Over Analog Signal Range | 7 ohm maximum |
| Signal Direction | Bidirectional analog channels |
| Process Technology | CMOS |
| 封裝 | 16-SOIC |
| 安裝類型 | Surface mount |
| 工作溫度範圍 | -40 °C to +85 °C |
| Production Status | Production |
MAX308ESE+ 16-soic 腳位配置指南
MAX308ESE+(16-soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX308ESE+.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX308ESE+ 適用於 6 應用s: Multiplexed Sensor Signal Acquisition, Precision Data-Acquisition Systems, Industrial Control Signal Routing, Laboratory Test Equipment, Battery-Powered Measurement Products, Audio and Communication Test Routing.
Multiplexed Sensor Signal Acquisition
The MAX308ESE+ fits sensor-frontend designs that must scan several analog inputs while sharing one measurement chain. Its 8:1 configuration connects one of eight sensors to a downstream amplifier or converter, while less-than-100Ω on-resistance keeps the switch contribution to loading relatively low. The within-5Ω matching between channels and 7Ω maximum variation over the specified analog range help preserve channel consistency. Bidirectional channels also permit reuse in test or switching arrangements. Confirm that sensor outputs remain within the family’s specified common-mode and analog ranges, and place the mux close enough to the analog source to minimize trace coupling.
推薦
Precision Data-Acquisition Systems
The MAX308ESE+ can reduce analog input-pin count in a multiplexed data-acquisition system by routing eight single-ended inputs toward one processing channel. Its less-than-100Ω on-resistance is suitable when the selected signal feeds a higher-impedance amplifier, while channel matching within 5Ω limits systematic differences between measurements taken on different inputs. The device also supports a dual 4-channel configuration when separate signal groups are more convenient. Designers should verify settling behavior, off-isolation, crosstalk, charge injection, and acquisition timing against the MAX308 family data sheet before using it for high-resolution measurements.
推薦
Industrial Control Signal Routing
The MAX308ESE+ is appropriate for industrial control boards that need to route low-level analog command or feedback signals among shared processing resources. Its industrial temperature rating of -40 °C to +85 °C supports equipment exposed to wider enclosure temperatures than a 0 °C to +70 °C commercial-grade switch. The 8-channel configuration provides useful routing density without requiring eight separate analog switch packages. Bidirectional operation supports both source selection and signal-path switching. Protection against industrial transients should be implemented separately if the selected input can receive cable-borne surges, and the system should not exceed the family’s stated signal limits.
推薦
Laboratory Test Equipment
The MAX308ESE+ fits programmable and laboratory test equipment that must connect several test points to one measurement instrument. Eight selectable inputs can be routed through the multiplexer, while the precision-oriented on-resistance characteristics help reduce channel-dependent attenuation. Bidirectional channels are useful when a fixture needs to select a DUT connection rather than merely choose an input source. For high-accuracy measurements, calculate the total source resistance, account for the mux contribution, and verify settling time after each address change. Keep sensitive analog routing compact and use a ground-return arrangement that minimizes coupling from digital address and enable lines.
推薦
Battery-Powered Measurement Products
The MAX308ESE+ can fit battery-powered instruments where a dedicated analog front end for every input would be impractical. Consolidating up to eight single-ended inputs behind one multiplexer reduces board area and can simplify the analog signal path. The device’s less-than-100Ω on-resistance provides a defined loading term to include in the sensor or source-impedance budget. Low-voltage operation and quiescent-current requirements must be checked in the MAX308 family data sheet before using the mux as the primary system power strategy. Rail-to-rail signal compatibility, leakage into high-impedance sensors, and shutdown behavior are particularly important in portable measurement equipment.
推薦
Audio and Communication Test Routing
The MAX308ESE+ can route low-level analog test signals in audio, communications, and interface test modules that require several sources to reach a common measurement path. Its 8:1 topology provides broad source selection, while the bidirectional channel characteristic allows the device to be used where signal flow may need to change according to test direction. The sub-100Ω on-resistance should be compared with the source and load impedances to determine the actual attenuation introduced by the selected path. For high-frequency or precision audio measurements, confirm bandwidth, off-isolation, crosstalk, and switching-time specifications rather than assuming performance beyond the published signal range.
推薦
推薦產品摘要
工程參考資料,適用於 MAX308ESE+ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX308ESE | MAX308CSE+ |
|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Product Type | Precision CMOS analog multiplexer | Precision CMOS analog multiplexer | MAX308 family precision CMOS analog multiplexer |
主要差異化特點
- Maintains channel consistency with closely matched on-resistance (對比MAX308ESE)
- Broader temperature range than the commercial family option (對比MAX308CSE+)
- Eight-channel routing in a 16-SOIC package (對比MAX308ESE)
設計說明
Route the selected analog path directly between the MAX308ESE+ channel pins and the receiving analog circuit. Keep address and enable traces away from sensitive common and channel nodes, use a continuous ground reference beneath the package where practical, and avoid sharing narrow return paths with high-current switching circuits. Short traces reduce parasitic capacitance and coupling, both of which can affect settling after an address change.
Include the maximum selected-channel on-resistance in the complete source-impedance calculation. Estimated source-path attenuation for a 100Ω mux resistance driving a 10kΩ load is approximately 0.99%, but the real result also includes connector, resistor, and protection-device resistance. Use the manufacturer’s lower-bound and maximum on-resistance values to establish worst-case gain error rather than relying on a nominal 100Ω figure.
Do not select MAX308CSE+ as a temperature-equivalent replacement for MAX308ESE+ in equipment operating below 0 °C or above 70 °C. The commercial-grade candidate is 40 °C narrower at the cold limit and 15 °C narrower at the hot limit. Likewise, MAX308ESE+T is a tape-and-reel ordering option rather than a distinct electrical upgrade, so its reel format and assembly process must be checked separately.
Place the bypass capacitor required by the MAX308 family layout guidance close to the supply and ground pins, and provide an uninterrupted ground return for the analog signals. Do not add an arbitrary large capacitor directly across switched nodes without checking the family’s switching-time and charge-injection characteristics. The large capacitor can lengthen settling intervals and alter the behavior of a precision measurement path.
合規資訊
The available manufacturer description confirms a production-status MAX308 family but does not provide explicit RoHS, REACH, halogen-free, conflict-minerals, or automotive-qualification statements. AEC-Q100 is not applicable because this is an analog interface IC rather than an automotive-qualified device.