Maxim Integrated

MAX310CPE+ - 8-Channel CMOS RF Video Multiplexer | Maxim

料号: MAX310CPE+ ✓ 量产中
16-pin PDIP Package
最小起订量: 1 |

MAX310CPE+ 概述

The Maxim Integrated MAX310CPE+ is an 8-channel CMOS RF and video multiplexer packaged in a 16-pin PDIP. It is designed to route multiple RF or video signals through a shared signal path while maintaining a compact through-hole footprint. The device is listed in production by Analog Devices, and the MAX310 family is identified as a CMOS RF/video multiplexer.

An RF or video multiplexer is an interface IC that connects several signal sources to one destination or selects one input path for downstream processing. In the signal-chain hierarchy, the MAX310 belongs to analog switches, interface ICs, and broader semiconductor signal-routing systems. Its 8-channel architecture is useful when several sources must be combined or selected without duplicating downstream receivers, tuners, or measurement equipment.

The MAX310CPE+ combines an 8-channel multiplexer configuration with CMOS construction and a 16-pin PDIP package. Through-hole mounting makes it suitable for legacy boards, laboratory instruments, educational equipment, prototypes, and industrial systems that use conventional plated-through-hole PCB footprints. The C designation identifies the temperature-grade family, while the E suffix denotes the 16-pin PDIP package in Maxim Integrated's device naming system.

The MAX310 family is intended for RF and video signal routing rather than general-purpose logic. Designers must account for the operating-frequency range, insertion loss, isolation, channel capacitance, switch resistance, supply requirements, control logic, and package-level thermal performance when laying out a new board. These electrical characteristics determine whether the multiplexer preserves signal integrity in the intended RF or video environment.

Typical uses include RF test systems, video-source selection, broadcast and surveillance equipment, cable-TV signal routing, instrumentation, and educational RF laboratories. In each case, the eight-channel organization can reduce the number of separate switching paths or provide source selection ahead of a common receiver. The MAX310CPE+ is also useful for maintaining older through-hole designs where a surface-mount multiplexer would not fit the existing board.

For a new design, confirm the complete pinout and signal ratings in the manufacturer MAX310 datasheet before routing the PCB. Maintain short RF traces, use a controlled reference plane, decouple the supply connection according to the datasheet guidance, and keep high-speed or high-frequency routes away from noisy switching nodes. Validate the finished channel performance with the intended source impedance and termination scheme.

This product page combines the MAX310 family identity, exact MAX310CPE+ ordering code, package information, lifecycle indication, sourcing links, and practical implementation guidance. It also distinguishes the true 16-pin PDIP variant from parts that use other packages and identifies why a footprint-compatible replacement must be selected from the pin-description table rather than by function alone.

直接替换替代料: MAX310CPE+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MAX310CPE+ (相同外形与封装尺寸) ——差异在于 Product Type.

Analog Devices
Product Type: 8:1 CMOS RF/video multiplexer
对比 MAX310CPE+ →

MAX310CPE

✅ 直接替换
📦 16-pin PDIP
Uses the same 8-channel MAX310 function and 16-pin PDIP footprint; suffix-specific temperature and qualification details must be confirmed.

📋 参考替代料(不在目录中)

MAX310MJE

✅ 直接替换
Analog Devices
📦 16-pin PDIP
8:1 CMOS RF/video multiplexer · Single 8:1 · 1 channel · CMOS · Unbuffered analog multiplexer · 250 ohms maximum · 16-pin CDIP · CDIP

联系询价

查看数据手册 →

MAX310CPE+ 规格参数

Product Type 8-channel CMOS RF/video multiplexer
Number of Channels 8 channels
Technology CMOS
封装 16-pin PDIP
安装类型 Through-hole
Supplier Device Package 16-PDIP
Manufacturer Family MAX310
Ordering Code MAX310CPE+
Production Status Production
引脚数量 16 pins

MAX310CPE+ 16-pdip 引脚配置指南

MAX310CPE+(16-pdip 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MAX310CPE+ 的 16-pdip 封装引脚图

暂无详细引脚数据: MAX310CPE+.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MAX310CPE+ 适用于 6 应用s: RF Source Selection, Video Source Multiplexing, Broadcast Signal Routing, Security Video Multiplexing, Educational RF Laboratory, RF Test and Measurement.

🌐

RF Source Selection

The MAX310CPE+ can serve as an 8-channel RF source-selection element in laboratory and industrial routing systems where several signal sources feed a common receiver or measurement path. Its 8-channel CMOS multiplexer organization reduces the number of independent switching networks required by the system architecture. The 16-pin PDIP package also supports legacy through-hole boards and prototype construction. Engineers should verify the MAX310 frequency range, insertion loss, isolation, impedance behavior, and control timing against the manufacturer datasheet before selecting signal paths.

📺

Video Source Multiplexing

The MAX310CPE+ is appropriate for equipment that selects among eight video-related RF signal paths before a downstream demodulator, display, or monitoring circuit. Using one multiplexed path can simplify receiver duplication while preserving an organized board structure. Because the device is specified as an RF/video multiplexer, the system designer must confirm video bandwidth, channel capacitance, insertion loss, and output isolation for each supported source type. Its 16-pin through-hole package is particularly useful for legacy monitors, broadcast test panels, and educational laboratory equipment.

📡

Broadcast Signal Routing

Broadcast and cable-TV test equipment can use the MAX310CPE+ to route multiple RF or video inputs into a shared measurement or processing chain. The eight-channel architecture provides a compact selection stage when several sources require the same downstream tuner, analyzer, or video processor. Layout should preserve controlled impedance and minimize discontinuities between the multiplexer and RF trace paths. The manufacturer datasheet remains the controlling document for supported frequencies, signal amplitudes, control states, and supply requirements before this device is used in a broadcast signal path.

🎥

Security Video Multiplexing

A surveillance-system designer may use the MAX310CPE+ where an 8-channel RF or video source-selection stage is required ahead of shared processing electronics. Consolidating source selection can reduce duplicated downstream circuitry and make channel routing easier to manage. However, video quality and system suitability depend on the MAX310's documented bandwidth, insertion loss, isolation, and output characteristics rather than the package or channel count alone. Existing coaxial or controlled-impedance boards should be evaluated carefully before the device is inserted into an operating surveillance chain.

🔧

Educational RF Laboratory

The MAX310CPE+ fits educational RF and video laboratories in which students need to switch among multiple sources for measurement, demonstration, or troubleshooting. The 8-channel architecture makes channel-selection experiments practical without building eight separate analog paths. Its 16-pin PDIP package is convenient for through-hole training boards, student prototypes, and instruments intended for frequent component replacement. Before construction, the instructor or designer should verify the pin assignment, operating limits, and required bypass components from the Analog Devices MAX310 datasheet and then check each switched path with test equipment.

⚡

RF Test and Measurement

The MAX310CPE+ can be used in a test system that selects among eight RF inputs before a common receiver, analyzer, or measurement module. This arrangement can reduce duplicated front-end hardware and provide a repeatable routing matrix for calibration or characterization. Signal integrity depends on using the same source impedances and terminations expected by the manufacturer specifications, while PCB trace geometry becomes increasingly important at higher operating frequencies. Confirm insertion loss, off-channel isolation, control timing, and allowable signal levels against the MAX310 datasheet for the intended test band.

What is the MAX310CPE+?
The MAX310CPE+ is an 8-channel CMOS RF and video multiplexer in a 16-pin PDIP package. Analog Devices lists the MAX310 family as an 8-channel CMOS RF video multiplexer in production. Its primary function is to route or select among multiple RF or video signal paths while preserving a compact through-hole footprint.
What are the key specifications of MAX310CPE+ that engineers should know?
The MAX310CPE+ is an 8-channel CMOS RF/video multiplexer housed in a 16-pin PDIP package. The MAX310 family is listed in production, and the exact MAX310CPE+ suffix identifies the through-hole orderable configuration. According to the Analog Devices MAX310 datasheet, the device is intended for RF and video multiplexing rather than general-purpose logic.
Where can I download the MAX310CPE+ datasheet PDF?
The MAX310CPE+ datasheet is available through the Analog Devices MAX310 product page at https://www.analog.com/en/products/MAX310.html. That page links to the MAX310 data sheet and product documentation. Use the pin-description table, electrical characteristics table, and typical application information in the manufacturer document before finalizing a PCB layout.
Where can I find the MAX310CPE+ pinout?
The MAX310CPE+ pinout must be taken from the pin-description table in the Analog Devices MAX310 datasheet. The device uses a 16-pin PDIP package, but the package alone does not establish each control, ground, supply, and signal-terminal assignment. Confirm every numbered terminal against the specific MAX310CPE+ data sheet before fabrication.
Is the MAX310CPE+ an 8-channel RF and video multiplexer?
Yes, the MAX310 family is an 8-channel CMOS RF video multiplexer. The MAX310CPE+ ordering code identifies the 16-pin PDIP configuration of that family. The eight-channel designation describes the device architecture, while the manufacturer's MAX310 datasheet provides the operating electrical limits and detailed connection information.
What package does the MAX310CPE+ use?
The MAX310CPE+ uses a 16-pin PDIP package with through-hole mounting. The suffix E identifies this package configuration in the MAX310 ordering system. It is therefore different from MAX310 versions offered in surface-mount packages, and a board designed for a 16-pin PDIP footprint should not accept a SOIC or other package variant without PCB modification.
Where can I buy MAX310CPE+ online?
Use the Request a Quote form on this page to request MAX310CPE+ sourcing, current availability, and lead time. The manufacturer lists the MAX310 family in production, but production status does not by itself guarantee every package variant is continuously stocked. Submit the exact MPN, target quantity, and required delivery location with the request.
What is the price of MAX310CPE+?
The current MAX310CPE+ price is obtained through the Request a Quote form on this page. Pricing can change with quantity, market conditions, and supply status, so a fixed price copied from an individual listing may not represent the requested configuration. Include your quantity, packaging requirements, and delivery schedule when requesting a quotation.
What is the lead time for MAX310CPE+?
The current MAX310CPE+ lead time must be confirmed through the Request a Quote form on this page. Analog Devices identifies the MAX310 family as being in production, but the exact orderable variant and customer volume still affect allocation and delivery timing. Provide the required quantity and target date when requesting the quotation.
Is MAX310CPE+ in stock?
Current MAX310CPE+ stock should be checked through the Request a Quote form on this page. A distributor listing may show historical or point-in-time inventory, while the manufacturer's production status is a separate lifecycle statement. Submit the exact MPN and quantity so the current channel can confirm availability against your procurement requirements.
When should I choose MAX310CPE+ over another video multiplexer?
Choose the MAX310CPE+ when the design requires the MAX310 family's 8-channel CMOS RF/video multiplexing function and specifically needs a 16-pin through-hole footprint. It is particularly suitable for legacy plated-through-hole assemblies and laboratory equipment. Choose another option when a surface-mount package, different pinout, different channel count, or different electrical ratings are required.
Is MAX310CPE+ suitable for RF test equipment?
The MAX310CPE+ is suitable for RF signal-routing portions of test equipment when its frequency range, insertion loss, isolation, and impedance behavior meet the test requirements. The 8-channel architecture can select among multiple sources ahead of shared test hardware. Confirm those parameters and the complete pinout in the Analog Devices MAX310 datasheet before releasing the design.
What is the difference between MAX310CPE+ and MAX310CPE?
MAX310CPE+ and MAX310CPE identify closely related ordering entries for the MAX310 family's 16-pin PDIP configuration. The plus suffix is the ordering designation used for the relevant lead-free product variant. Before treating one as a substitute for the other, compare the complete ordering table, lifecycle status, and package marking because suffix conventions can vary by manufacturer program.
Can MAX314CSE replace MAX310CPE+?
MAX314CSE should not be treated as a direct drop-in replacement for MAX310CPE+ without a board-level review because the MAX314CSE is associated with a surface-mount package while the MAX310CPE+ uses a 16-pin PDIP footprint. A package difference prevents direct insertion. Verify pinout, electrical ratings, control logic, and signal characteristics before considering any redesign.
What can replace MAX310CPE+ on the same PCB?
A same-PCB replacement must use the same 16-pin PDIP footprint and have a pin-compatible pin description, compatible control logic, and electrical ratings appropriate for the application. The verified replacement search did not identify five qualified drop-in alternatives for the MAX310CPE+. Therefore, do not substitute a package or function match without checking the manufacturer pin table and performing board-level validation.
Is there a Maxim Integrated equivalent to MAX310CPE+?
The closest verified same-brand orderable comparison is the MAX310CPE+ itself in the 16-pin PDIP configuration. A MAX310CPA uses a different surface-mount package and therefore is not a drop-in replacement for a board using a 16-pin PDIP footprint. Any different Maxim part should be treated as a redesign candidate until its pinout, ratings, and channel behavior are verified.

工程参考数据: MAX310CPE+ ——对比、设计指导和合规信息。

选型指南

Choose the MAX310CPE+ when a design requires an 8-channel CMOS RF/video multiplexer in a 16-pin through-hole package, particularly for legacy boards, laboratory instruments, and educational equipment. Its principal advantages are the eight-channel organization and exact MAX310 family integration in a production-listed device. However, the package does not make every MAX310 variant interchangeable: surface-mount options such as MAX310CPA require a different footprint. Likewise, a related device such as MAX314CSE is not a direct drop-in substitute because its package and potentially its electrical behavior differ. For new designs, confirm operating frequency, insertion loss, isolation, signal level, control logic, supply voltage, and temperature range in the manufacturer datasheet. For an existing board, reproduce the original device's footprint and pin assignment exactly, then perform signal-path validation with the intended source and termination conditions.

与替代料对比

参数 本产品
Product Type 8-channel CMOS RF/video multiplexer
Number of Channels 8 channels
Technology CMOS
Package 16-pin PDIP
Mounting Type Through-hole
Manufacturer Maxim Integrated
Production Status Production
Ordering Code MAX310CPE+

关键差异点

  • Eight-channel RF and video multiplexing in one device (对比 MAX314CSE)
  • Exact 16-pin through-hole orderable configuration (对比 MAX310CPA)
  • Production family with a defined product page (对比 MAX310CPE)

设计说明

Assign the PCB footprint from the MAX310CPE+ pin-description table and preserve the 16-pin PDIP geometry. Keep each RF or video route short, use a continuous ground reference where appropriate, and avoid routing sensitive paths beside digital control and supply-return conductors. Because the MAX310 is intended for RF/video multiplexing, trace geometry and return paths can influence insertion loss and coupling between the eight channels.

Place the device close to the common signal path it serves so that selected channels experience similar routing lengths where channel matching matters. Keep unused or unused-state terminals configured according to the manufacturer guidance, and do not infer their treatment from general analog-switch conventions. Verify the pin table, control truth table, and recommended external components in the Analog Devices MAX310 datasheet before releasing the layout.

Validate each channel with the actual source impedance, cable or PCB loss, termination, and receiver loading that will appear in production. The 8-channel designation does not by itself guarantee equal insertion loss, isolation, or bandwidth across every operating mode. Measure the assembled board because package parasitics, connector transitions, ground discontinuities, and adjacent-channel coupling can affect performance beyond the device's intrinsic characteristics.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The MAX310 family is listed in production, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements appear in the cited product information.

数据核验日期: 2026-11-09 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MAX310CPE+ datasheet MAX310CPE+ datasheet pdf MAX310CPE+ pinout MAX310CPE+ specifications MAX310CPE+ 16-PDIP MAX310CPE+ equivalent MAX310CPE+ replacement MAX310CPE+ RF video multiplexer MAX310CPE+ price MAX310CPE+ stock Maxim Integrated MAX310CPE+ MAX310CPE+ vs MAX314CSE

相关元器件 & 术语

Maxim Integrated Analog Devices MAX310CPE+ MAX310 MAX314CSE MAX310CPA 8-channel multiplexer RF multiplexer video multiplexer analog switch interface IC CMOS 16-pin PDIP through-hole mounting RF signal routing video source selection broadcast equipment security video test and measurement insertion loss off-channel isolation control logic signal integrity semiconductor
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情