MAX310CPE+ - 8-Channel CMOS RF Video Multiplexer | Maxim
MPN: MAX310CPE+ ✓ פעילMAX310CPE+ סקירה
An RF or video multiplexer is an interface IC that connects several signal sources to one destination or selects one input path for downstream processing. In the signal-chain hierarchy, the MAX310 belongs to analog switches, interface ICs, and broader semiconductor signal-routing systems. Its 8-channel architecture is useful when several sources must be combined or selected without duplicating downstream receivers, tuners, or measurement equipment.
The MAX310CPE+ combines an 8-channel multiplexer configuration with CMOS construction and a 16-pin PDIP package. Through-hole mounting makes it suitable for legacy boards, laboratory instruments, educational equipment, prototypes, and industrial systems that use conventional plated-through-hole PCB footprints. The C designation identifies the temperature-grade family, while the E suffix denotes the 16-pin PDIP package in Maxim Integrated's device naming system.
The MAX310 family is intended for RF and video signal routing rather than general-purpose logic. Designers must account for the operating-frequency range, insertion loss, isolation, channel capacitance, switch resistance, supply requirements, control logic, and package-level thermal performance when laying out a new board. These electrical characteristics determine whether the multiplexer preserves signal integrity in the intended RF or video environment.
Typical uses include RF test systems, video-source selection, broadcast and surveillance equipment, cable-TV signal routing, instrumentation, and educational RF laboratories. In each case, the eight-channel organization can reduce the number of separate switching paths or provide source selection ahead of a common receiver. The MAX310CPE+ is also useful for maintaining older through-hole designs where a surface-mount multiplexer would not fit the existing board.
For a new design, confirm the complete pinout and signal ratings in the manufacturer MAX310 datasheet before routing the PCB. Maintain short RF traces, use a controlled reference plane, decouple the supply connection according to the datasheet guidance, and keep high-speed or high-frequency routes away from noisy switching nodes. Validate the finished channel performance with the intended source impedance and termination scheme.
This product page combines the MAX310 family identity, exact MAX310CPE+ ordering code, package information, lifecycle indication, sourcing links, and practical implementation guidance. It also distinguishes the true 16-pin PDIP variant from parts that use other packages and identifies why a footprint-compatible replacement must be selected from the pin-description table rather than by function alone.
חלופות תחליף ישיר עבור MAX310CPE+ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MAX310CPE+ (אותו גורם צורה וטביעת רגל) — שונים ב Product Type.
MAX310CPE
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MAX310MJE
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MAX310CPE+ מפרטים
| Product Type | 8-channel CMOS RF/video multiplexer |
| Number of Channels | 8 channels |
| Technology | CMOS |
| מארז | 16-pin PDIP |
| סוג הרכבה | Through-hole |
| Supplier Device Package | 16-PDIP |
| Manufacturer Family | MAX310 |
| Ordering Code | MAX310CPE+ |
| Production Status | Production |
| מספר פינים | 16 pins |
מדריך תצורת פינים של MAX310CPE+ 16-pdip
תצורת פינים עבור MAX310CPE+ (מארזת 16-pdip). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור MAX310CPE+.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MAX310CPE+ מתאים עבור 6 יישוםs: RF Source Selection, Video Source Multiplexing, Broadcast Signal Routing, Security Video Multiplexing, Educational RF Laboratory, RF Test and Measurement.
RF Source Selection
The MAX310CPE+ can serve as an 8-channel RF source-selection element in laboratory and industrial routing systems where several signal sources feed a common receiver or measurement path. Its 8-channel CMOS multiplexer organization reduces the number of independent switching networks required by the system architecture. The 16-pin PDIP package also supports legacy through-hole boards and prototype construction. Engineers should verify the MAX310 frequency range, insertion loss, isolation, impedance behavior, and control timing against the manufacturer datasheet before selecting signal paths.
Video Source Multiplexing
The MAX310CPE+ is appropriate for equipment that selects among eight video-related RF signal paths before a downstream demodulator, display, or monitoring circuit. Using one multiplexed path can simplify receiver duplication while preserving an organized board structure. Because the device is specified as an RF/video multiplexer, the system designer must confirm video bandwidth, channel capacitance, insertion loss, and output isolation for each supported source type. Its 16-pin through-hole package is particularly useful for legacy monitors, broadcast test panels, and educational laboratory equipment.
Broadcast Signal Routing
Broadcast and cable-TV test equipment can use the MAX310CPE+ to route multiple RF or video inputs into a shared measurement or processing chain. The eight-channel architecture provides a compact selection stage when several sources require the same downstream tuner, analyzer, or video processor. Layout should preserve controlled impedance and minimize discontinuities between the multiplexer and RF trace paths. The manufacturer datasheet remains the controlling document for supported frequencies, signal amplitudes, control states, and supply requirements before this device is used in a broadcast signal path.
Security Video Multiplexing
A surveillance-system designer may use the MAX310CPE+ where an 8-channel RF or video source-selection stage is required ahead of shared processing electronics. Consolidating source selection can reduce duplicated downstream circuitry and make channel routing easier to manage. However, video quality and system suitability depend on the MAX310's documented bandwidth, insertion loss, isolation, and output characteristics rather than the package or channel count alone. Existing coaxial or controlled-impedance boards should be evaluated carefully before the device is inserted into an operating surveillance chain.
Educational RF Laboratory
The MAX310CPE+ fits educational RF and video laboratories in which students need to switch among multiple sources for measurement, demonstration, or troubleshooting. The 8-channel architecture makes channel-selection experiments practical without building eight separate analog paths. Its 16-pin PDIP package is convenient for through-hole training boards, student prototypes, and instruments intended for frequent component replacement. Before construction, the instructor or designer should verify the pin assignment, operating limits, and required bypass components from the Analog Devices MAX310 datasheet and then check each switched path with test equipment.
RF Test and Measurement
The MAX310CPE+ can be used in a test system that selects among eight RF inputs before a common receiver, analyzer, or measurement module. This arrangement can reduce duplicated front-end hardware and provide a repeatable routing matrix for calibration or characterization. Signal integrity depends on using the same source impedances and terminations expected by the manufacturer specifications, while PCB trace geometry becomes increasingly important at higher operating frequencies. Confirm insertion loss, off-channel isolation, control timing, and allowable signal levels against the MAX310 datasheet for the intended test band.
נתוני עזר הנדסיים עבור MAX310CPE+ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Product Type | 8-channel CMOS RF/video multiplexer |
| Number of Channels | 8 channels |
| Technology | CMOS |
| Package | 16-pin PDIP |
| Mounting Type | Through-hole |
| Manufacturer | Maxim Integrated |
| Production Status | Production |
| Ordering Code | MAX310CPE+ |
מבדילים עיקריים
- Eight-channel RF and video multiplexing in one device (לעומתMAX314CSE)
- Exact 16-pin through-hole orderable configuration (לעומתMAX310CPA)
- Production family with a defined product page (לעומתMAX310CPE)
הערות תכנון
Assign the PCB footprint from the MAX310CPE+ pin-description table and preserve the 16-pin PDIP geometry. Keep each RF or video route short, use a continuous ground reference where appropriate, and avoid routing sensitive paths beside digital control and supply-return conductors. Because the MAX310 is intended for RF/video multiplexing, trace geometry and return paths can influence insertion loss and coupling between the eight channels.
Place the device close to the common signal path it serves so that selected channels experience similar routing lengths where channel matching matters. Keep unused or unused-state terminals configured according to the manufacturer guidance, and do not infer their treatment from general analog-switch conventions. Verify the pin table, control truth table, and recommended external components in the Analog Devices MAX310 datasheet before releasing the layout.
Validate each channel with the actual source impedance, cable or PCB loss, termination, and receiver loading that will appear in production. The 8-channel designation does not by itself guarantee equal insertion loss, isolation, or bandwidth across every operating mode. Measure the assembled board because package parasitics, connector transitions, ground discontinuities, and adjacent-channel coupling can affect performance beyond the device's intrinsic characteristics.
מידע על תאימות
The MAX310 family is listed in production, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements appear in the cited product information.