MAX3221CAE+TG1Z - 1/1 RS-232 Transceiver | Analog Devices
料号: MAX3221CAE+TG1Z ✓ 量产中MAX3221CAE+TG1Z 概述
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into CMOS-compatible logic. The MAX3221 belongs to the hierarchy of RS-232 interface transceiver, serial interface IC, interface controller, and semiconductor. It is intended for equipment that needs bidirectional or unidirectional point-to-point serial connectivity without relying on a modern multi-standard transceiver family.
The principal features of the MAX3221 include one RS-232 driver, one RS-232 receiver, operation from 3V to 5.5V, and a 1 µA AutoShutdown supply current. AutoShutdown reduces supply demand when the receiver does not detect a valid signal level. This makes the device useful in portable equipment and systems where a permanently connected serial port would otherwise waste power. Its 16-terminal gull-wing SSOP construction supports compact surface-mount assemblies.
The device uses Maxim's low-power RS-232 interface architecture to support systems that cannot tolerate excessive supply current. The on-board charge-pump and driver circuitry provide the voltage swings required by RS-232 while the receiver converts the line-level input into a digital output. Designers should still account for the voltage difference between logic-side ground and the RS-232 line reference when integrating the device with another circuit board.
Typical uses include industrial serial adapters, test equipment, data acquisition modules, point-of-sale terminals, instrument-control links, and legacy peripheral interfaces. The MAX3221 is especially appropriate where a compact single-channel interface is required rather than the multiple drivers and receivers offered by larger RS-232 families. For battery-powered instruments, its 1 µA shutdown current can reduce standby consumption.
A key design consideration is ensuring that the logic supply, charge-pump capacitors, driver connection, receiver input, and signal ground are routed according to the manufacturer application guidance. Keep the interface connector and transceiver return path together where practical, and use suitable protection for exposed cables. Review the manufacturer's pin description and application circuit before assigning the 16 SSOP terminals or selecting external bypass capacitors.
This product record combines the official MAX3221 family information, exact package attributes, commercial sourcing information, pin-compatible alternatives, comparison parameters, and application guidance to support component selection and board-level implementation.
直接替换替代料: MAX3221CAE+TG1Z ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX3221CAE+TG1Z (相同外形与封装尺寸) ——差异在于 Interface Standard, Number of Drivers, Number of Receivers, Supply Voltage Range.
MAX3221CSE+
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MAX3232CSE+
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MAX3227CSE+
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MAX3243CSE+
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MAX3223CSE+
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MAX3221CAE+TG1Z 规格参数
| Transceiver Configuration | 1 driver / 1 receiver |
| Interface Standard | Full RS-232 |
| Supply Voltage Range | +3 V to +5.5 V |
| AutoShutdown Supply Current | 1 µA |
| Number of Terminals | 16 |
| Package Code | SSOP |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
| 安装类型 | Surface mount |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Power-Saving Feature | AutoShutdown |
MAX3221CAE+TG1Z rectangular 引脚配置指南
MAX3221CAE+TG1Z(rectangular 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX3221CAE+TG1Z.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX3221CAE+TG1Z 适用于 6 应用s: Industrial Serial Adapters, Point-of-Sale Terminals, Test and Measurement Instruments, Data Acquisition Modules, Legacy Peripheral Connectivity, Battery-Powered Portable Equipment.
Industrial Serial Adapters
The MAX3221CAE+TG1Z suits industrial adapters that translate a serial controller's logic signals into a full RS-232 connection. Its one-driver, one-receiver configuration covers one RS-232 channel, while the +3V to +5.5V operating range supports both 3.3V and 5V system rails. AutoShutdown reduces supply current to 1 µA when the receiver detects no valid activity, which is useful in adapters that remain connected to equipment during long idle periods. The 16-SSOP package preserves a compact surface-mount footprint. For field-connected equipment, add the protection and grounding appropriate to the cable environment.
推荐
Point-of-Sale Terminals
Point-of-sale terminals often need a dependable RS-232 link to a peripheral such as a printer, scanner, or customer display. The MAX3221CAE+TG1Z provides the required single driver and single receiver in a 16-pin SSOP package and operates directly from +3V to +5.5V. Its 1 µA AutoShutdown current is beneficial when the terminal expects intermittent communication and must minimize standby consumption. Use the receiver output to detect peripheral activity, keep the logic ground reference close to the transceiver, and confirm connector pin assignments in the system wiring diagram.
推荐
Test and Measurement Instruments
The MAX3221CAE+TG1Z can provide a simple RS-232 control or data connection for laboratory and field-test equipment. The +3V to +5.5V supply range allows it to sit beside modern 3.3V control electronics without requiring a 5V-only interface, while the one-driver, one-receiver arrangement supports a point-to-point link. AutoShutdown is useful in handheld instruments because it limits idle consumption to 1 µA when no valid receiver activity is present. In a rack-mounted instrument, provide appropriate surge protection and route the interface ground consistently with the equipment's safety and signal-ground architecture.
推荐
Data Acquisition Modules
Data acquisition modules that must communicate with legacy laboratory equipment can use the MAX3221CAE+TG1Z as a compact RS-232 interface. Its one transmitter and one receiver are sufficient for a single command or measurement-data channel, and operation from +3V to +5.5V simplifies integration with 3.3V sensors, processors, and memory. When the link is inactive, AutoShutdown holds the device at 1 µA supply current, reducing standby demand in distributed acquisition nodes. The 16-SSOP construction also supports compact PCB layouts, although cable transients and ground-potential differences should be handled separately from the transceiver itself.
推荐
Legacy Peripheral Connectivity
The MAX3221CAE+TG1Z is appropriate for connecting a modern controller to an older peripheral that exposes only an RS-232 port. The device provides one RS-232 driver and one receiver in a 16-SSOP package, allowing logic-level circuitry to communicate without adding a larger multi-channel transceiver. Its +3V to +5.5V range supports contemporary control logic, and AutoShutdown reduces power use to 1 µA during periods when the peripheral is not transmitting. During integration, verify the peripheral's logic levels, handshake requirements, connector wiring, and whether hardware flow control is necessary for reliable message framing.
推荐
Battery-Powered Portable Equipment
A battery-powered portable instrument can benefit from the MAX3221CAE+TG1Z because its AutoShutdown supply current is only 1 µA when the receiver senses no valid signal. The interface remains available for a single RS-232 channel, and the +3V to +5.5V operating range fits common portable-system rails. The 16-SSOP package minimizes board area, while the single-channel architecture avoids carrying unused driver or receiver circuitry. Designers should account for the enable state, cable connection behavior, and the system's supply-current budget because a permanently connected cable can change how often AutoShutdown enters its low-power state.
推荐
推荐产品汇总
工程参考数据: MAX3221CAE+TG1Z ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX3221CSE+ | MAX3232CSE+ | MAX3227CSE+ | MAX3243CSE+ | MAX3223CSE+ |
|---|---|---|---|---|---|---|
| Package | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Driver / Receiver Count | 1 / 1 | 1 / 1 | 1 / 1 | 1 / 1 | 1 / 3 | 1 / 1 |
| Interface Standard | Full RS-232 | Full RS-232 | Full RS-232 | Full RS-232 | Full RS-232 | Full RS-232 |
| Power-Saving Feature | AutoShutdown | AutoShutdown | AutoShutdown | AutoShutdown | AutoShutdown | AutoShutdown |
关键差异点
- Single-channel RS-232 interface in a compact SSOP package (对比 MAX3243CSE+)
- Low-power shutdown for intermittent links (对比 MAX3223CSE+)
- True 3.3V-compatible RS-232 operation (对比 MAX3232CPW)
设计说明
Use the AutoShutdown behavior as part of the product power budget. The MAX3221CAE+TG1Z reaches 1 µA supply current when no valid receiver signal is detected, but a connected or noisy RS-232 line can affect when that state is recognized. Account for the normal active-state current, external transceiver losses, and system leakage rather than sizing the entire design from the 1 µA figure alone.
Place the charge-pump capacitors, supply bypass capacitor, driver output, and receiver input exactly as shown in the manufacturer application circuit. Keep the SSOP footprint compatible with the selected alternative's terminal numbering and lead dimensions. Route the RS-232 line away from sensitive analog or high-speed digital traces, and connect the transceiver ground reference to the interface ground in accordance with the complete equipment grounding design.
Do not treat an SSOP package code alone as proof of drop-in compatibility. Confirm pin numbering, body width, lead pitch, exposed features, and every electrical threshold in the manufacturer package drawing and datasheet. The MAX3221, MAX3232, MAX3227, MAX3243, and MAX3223 families can differ in shutdown behavior or receiver count even when they share a 16-terminal outline.
RS-232 drivers produce fast edge transitions and can couple noise into adjacent circuitry. Keep the driver return path continuous, use a solid ground reference, and maintain separation from clocks, sensors, and precision analog inputs. At an external connector, apply suitable transient protection and consider cable-length limitations. Verify conducted and radiated emissions at the complete product level because the transceiver package alone does not determine system compliance.
合规信息
The MAX3221 is an interface IC rather than an automotive-qualified component, so AEC-Q100 is marked not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering suffix.