Analog Devices

MAX3221CAE+TG1Z - 1/1 RS-232 Transceiver | Analog Devices

MPN: MAX3221CAE+TG1Z ✓ 啟用中
+3 V to +5.5 V Vdss 1 µA Id SSOP Package
MOQ: 1 |

MAX3221CAE+TG1Z 概覽

The Analog Devices MAX3221CAE+TG1Z is a single-driver, single-receiver RS-232 line transceiver designed for true +3V to +5.5V operation. It provides one driver and one receiver in a 16-pin SSOP package, supports the full RS-232 interface standard, and draws only 1 µA through the AutoShutdown feature when no valid receiver signal is detected. The commercial-temperature, tape-and-reel ordering designation is MAX3221CAE+TG1Z.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into CMOS-compatible logic. The MAX3221 belongs to the hierarchy of RS-232 interface transceiver, serial interface IC, interface controller, and semiconductor. It is intended for equipment that needs bidirectional or unidirectional point-to-point serial connectivity without relying on a modern multi-standard transceiver family.

The principal features of the MAX3221 include one RS-232 driver, one RS-232 receiver, operation from 3V to 5.5V, and a 1 µA AutoShutdown supply current. AutoShutdown reduces supply demand when the receiver does not detect a valid signal level. This makes the device useful in portable equipment and systems where a permanently connected serial port would otherwise waste power. Its 16-terminal gull-wing SSOP construction supports compact surface-mount assemblies.

The device uses Maxim's low-power RS-232 interface architecture to support systems that cannot tolerate excessive supply current. The on-board charge-pump and driver circuitry provide the voltage swings required by RS-232 while the receiver converts the line-level input into a digital output. Designers should still account for the voltage difference between logic-side ground and the RS-232 line reference when integrating the device with another circuit board.

Typical uses include industrial serial adapters, test equipment, data acquisition modules, point-of-sale terminals, instrument-control links, and legacy peripheral interfaces. The MAX3221 is especially appropriate where a compact single-channel interface is required rather than the multiple drivers and receivers offered by larger RS-232 families. For battery-powered instruments, its 1 µA shutdown current can reduce standby consumption.

A key design consideration is ensuring that the logic supply, charge-pump capacitors, driver connection, receiver input, and signal ground are routed according to the manufacturer application guidance. Keep the interface connector and transceiver return path together where practical, and use suitable protection for exposed cables. Review the manufacturer's pin description and application circuit before assigning the 16 SSOP terminals or selecting external bypass capacitors.

This product record combines the official MAX3221 family information, exact package attributes, commercial sourcing information, pin-compatible alternatives, comparison parameters, and application guidance to support component selection and board-level implementation.

直接替換替代品,適用於 MAX3221CAE+TG1Z — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MAX3221CAE+TG1Z (相同外形與佔位) — 差異在於 Interface Standard, Number of Drivers, Number of Receivers, Supply Voltage Range.

Maxim Integrated
Interface Standard: True RS-232
Number of Drivers: 2
Number of Receivers: 2
比較對象 MAX3221CAE+TG1Z →

MAX3221CSE+

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-SSOP
Same 1/1 RS-232 architecture and 16-SSOP format; the SSOP body and lead dimensions must be checked for the exact package drawing.

📋 參考替代品(不在目錄中)

MAX3232CSE+

✅ 直接替換 ⚠️ 規格未經驗證
Maxim Integrated
📦 16-SSOP
Dual RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · Up to 1Mbps · True RS-232 · RS-232, CMOS · Low-power

聯絡詢價

查看資料表 →

MAX3227CSE+

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-SSOP
Maintains a 1/1 RS-232 configuration in 16-SSOP; shutdown and charge-pump behavior must be compared with the MAX3221 specification.

📋 參考替代品(不在目錄中)

MAX3243CSE+

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-SSOP
Provides 1 driver and 3 receivers versus 1 driver and 1 receiver, adding two receiver channels while retaining a 16-SSOP format.

📋 參考替代品(不在目錄中)

MAX3223CSE+

✅ 直接替換 ⚠️ 規格未經驗證
📦 16-SSOP
Shares the 1/1 RS-232 configuration and 16-SSOP format; AutoShutdown timing and exact pin behavior must be confirmed against the datasheet.

📋 參考替代品(不在目錄中)

MAX3221CAE+TG1Z 規格

Transceiver Configuration 1 driver / 1 receiver
Interface Standard Full RS-232
Supply Voltage Range +3 V to +5.5 V
AutoShutdown Supply Current 1 µA
Number of Terminals 16
Package Code SSOP
Terminal Form Gull wing
Package Shape Rectangular
Temperature Grade Commercial
安裝類型 Surface mount
Number of Drivers 1
Number of Receivers 1
Power-Saving Feature AutoShutdown

MAX3221CAE+TG1Z rectangular 腳位配置指南

MAX3221CAE+TG1Z(rectangular 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX3221CAE+TG1Z 的 rectangular 封裝腳位圖

無詳細腳位定義資料: MAX3221CAE+TG1Z.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX3221CAE+TG1Z 適用於 6 應用s: Industrial Serial Adapters, Point-of-Sale Terminals, Test and Measurement Instruments, Data Acquisition Modules, Legacy Peripheral Connectivity, Battery-Powered Portable Equipment.

🏭

Industrial Serial Adapters

The MAX3221CAE+TG1Z suits industrial adapters that translate a serial controller's logic signals into a full RS-232 connection. Its one-driver, one-receiver configuration covers one RS-232 channel, while the +3V to +5.5V operating range supports both 3.3V and 5V system rails. AutoShutdown reduces supply current to 1 µA when the receiver detects no valid activity, which is useful in adapters that remain connected to equipment during long idle periods. The 16-SSOP package preserves a compact surface-mount footprint. For field-connected equipment, add the protection and grounding appropriate to the cable environment.

🖥️

Point-of-Sale Terminals

Point-of-sale terminals often need a dependable RS-232 link to a peripheral such as a printer, scanner, or customer display. The MAX3221CAE+TG1Z provides the required single driver and single receiver in a 16-pin SSOP package and operates directly from +3V to +5.5V. Its 1 µA AutoShutdown current is beneficial when the terminal expects intermittent communication and must minimize standby consumption. Use the receiver output to detect peripheral activity, keep the logic ground reference close to the transceiver, and confirm connector pin assignments in the system wiring diagram.

🔧

Test and Measurement Instruments

The MAX3221CAE+TG1Z can provide a simple RS-232 control or data connection for laboratory and field-test equipment. The +3V to +5.5V supply range allows it to sit beside modern 3.3V control electronics without requiring a 5V-only interface, while the one-driver, one-receiver arrangement supports a point-to-point link. AutoShutdown is useful in handheld instruments because it limits idle consumption to 1 µA when no valid receiver activity is present. In a rack-mounted instrument, provide appropriate surge protection and route the interface ground consistently with the equipment's safety and signal-ground architecture.

📡

Data Acquisition Modules

Data acquisition modules that must communicate with legacy laboratory equipment can use the MAX3221CAE+TG1Z as a compact RS-232 interface. Its one transmitter and one receiver are sufficient for a single command or measurement-data channel, and operation from +3V to +5.5V simplifies integration with 3.3V sensors, processors, and memory. When the link is inactive, AutoShutdown holds the device at 1 µA supply current, reducing standby demand in distributed acquisition nodes. The 16-SSOP construction also supports compact PCB layouts, although cable transients and ground-potential differences should be handled separately from the transceiver itself.

🔌

Legacy Peripheral Connectivity

The MAX3221CAE+TG1Z is appropriate for connecting a modern controller to an older peripheral that exposes only an RS-232 port. The device provides one RS-232 driver and one receiver in a 16-SSOP package, allowing logic-level circuitry to communicate without adding a larger multi-channel transceiver. Its +3V to +5.5V range supports contemporary control logic, and AutoShutdown reduces power use to 1 µA during periods when the peripheral is not transmitting. During integration, verify the peripheral's logic levels, handshake requirements, connector wiring, and whether hardware flow control is necessary for reliable message framing.

🔋

Battery-Powered Portable Equipment

A battery-powered portable instrument can benefit from the MAX3221CAE+TG1Z because its AutoShutdown supply current is only 1 µA when the receiver senses no valid signal. The interface remains available for a single RS-232 channel, and the +3V to +5.5V operating range fits common portable-system rails. The 16-SSOP package minimizes board area, while the single-channel architecture avoids carrying unused driver or receiver circuitry. Designers should account for the enable state, cable connection behavior, and the system's supply-current budget because a permanently connected cable can change how often AutoShutdown enters its low-power state.

推薦產品摘要

MAX3232CPW Single-channel RS-232 transceiver family alternative for interface designs 用於: Industrial Serial Adapters, Point-of-Sale Terminals, Test and Measurement Instruments, Data Acquisition Modules, Legacy Peripheral Connectivity, Battery-Powered Portable Equipment MAX3221CAE+ Analog Devices 用於: Industrial Serial Adapters, Test and Measurement Instruments, Legacy Peripheral Connectivity, Battery-Powered Portable Equipment MAX326CEE+T Serial-interface device considered during multi-channel interface design 用於: Point-of-Sale Terminals, Data Acquisition Modules
What is the MAX3221CAE+TG1Z?
The MAX3221CAE+TG1Z is a 1-driver, 1-receiver RS-232 transceiver from Analog Devices in a 16-pin SSOP package. It operates from +3V to +5.5V and includes AutoShutdown, which reduces supply current to 1 µA when the receiver does not detect a valid signal. According to the Analog Devices MAX3221 product page, the MAX3221 family is designed for low-power RS-232 links and provides a compact interface between CMOS logic and an RS-232 port.
Where can I download the MAX3221CAE+TG1Z datasheet PDF?
The official MAX3221CAE+TG1Z datasheet and product information are available from the Analog Devices MAX3221 product page at analog.com. The MAX3221CAE+TG1Z ordering code identifies the 16-SSOP commercial-temperature version, while the product page covers the MAX3221, MAX3223, and MAX3243 family. Use the manufacturer's data sheet for the exact pin descriptions, recommended operating limits, charge-pump capacitor values, and typical application circuit.
Where can I find the MAX3221CAE+TG1Z pinout?
The MAX3221CAE+TG1Z uses a 16-terminal SSOP pin configuration, and its exact pin assignment must be taken from the manufacturer pin-description table. The package has 16 gull-wing terminals, but a complete numbered signal list is not reproduced on this page because the exact pin names were not present in the product listing information. Consult the official MAX3221 datasheet and the MAX3221CAE+TG1Z ordering information before routing the PCB.
What are the key specifications of MAX3221CAE+TG1Z that engineers should know?
The key specifications are one RS-232 driver, one RS-232 receiver, a +3V to +5.5V supply range, 1 µA AutoShutdown supply current, and a 16-pin SSOP package. The MAX3221CAE+TG1Z is a commercial-temperature surface-mount part with gull-wing terminals. According to the Analog Devices MAX3221 product page, AutoShutdown turns off the internal supply and drivers when the receiver inputs contain no valid signal level.
Does MAX3221CAE+TG1Z support 3.3V operation?
Yes, the MAX3221CAE+TG1Z supports true +3V to +5.5V operation. The Mouser product listing identifies the MAX3221CAE+ as a true +3V to +5.5V RS-232 interface IC, and the Analog Devices MAX3221 family page describes the same supply range. This makes the device suitable for 3.3V systems where the logic-side interface cannot tolerate a 5V-only supply.
What is AutoShutdown on the MAX3221CAE+TG1Z?
AutoShutdown is the MAX3221 family's low-power shutdown function, and it reduces supply current to 1 µA when no valid signal appears at the receiver inputs. When a valid receiver activity is detected, the internal power supply and drivers resume operation. According to the Analog Devices MAX3221 product page, this behavior is useful for reducing power consumption in intermittently connected RS-232 equipment.
What can replace MAX3221CAE+TG1Z?
The closest same-family drop-in choices include the MAX3221CSE+ and MAX3232CSE+ in the 16-SSOP format, but the replacement must be checked against the target's electrical limits, shutdown behavior, and package drawing. The MAX3221CAE+TG1Z is a single-driver, single-receiver RS-232 device operating from +3V to +5.5V. Confirm the complete pin and parameter comparison before treating any alternative as a production substitute.
What is the best Analog Devices equivalent for MAX3221CAE+TG1Z?
The MAX3221CSE+ is the leading same-family option for a 16-SSOP implementation because it retains the MAX3221 one-driver, one-receiver RS-232 architecture. The MAX3232CSE+ is another 1/1 family alternative for designs whose electrical requirements align. The MAX3221CAE+TG1Z itself provides +3V to +5.5V operation and 1 µA AutoShutdown, so the final choice must preserve those system requirements and the SSOP footprint.
MAX3221CAE+TG1Z vs MAX3232CPW - which is better for a compact serial interface?
The MAX3221CAE+TG1Z is the better fit when the PCB requires the exact 16-SSOP target footprint and a +3V to +5.5V single-channel RS-232 interface. MAX3232CPW is presented as a functional alternative in comparison data, but its TSSOP package and complete pin requirements must be checked before substitution. The MAX3221CAE+TG1Z has one driver, one receiver, and a 1 µA AutoShutdown supply current.
Is MAX3232CSE+ a drop-in replacement for MAX3221CAE+TG1Z?
MAX3232CSE+ can serve as a same-package candidate for the MAX3221CAE+TG1Z because both belong to the MAX3221/MAX3223/MAX3243 interface family and use a 16-SSOP format. Both provide a one-driver, one-receiver RS-232 configuration in the cited family information. Before replacement, verify every pin, charge-pump capacitor connection, operating limit, and AutoShutdown threshold against the manufacturer datasheet.
When should I choose MAX3221CAE+TG1Z over MAX3221CSE+?
Choose MAX3221CAE+TG1Z when the ordered assembly requires the commercial-grade MAX3221CAE variant in tape-and-reel format and the board uses its documented 16-SSOP footprint. Choose MAX3221CSE+ when its narrower SSOP dimensions, lead geometry, and assembly process are confirmed compatible. Both are single-channel RS-232 family devices, so the decision depends primarily on the exact mechanical drawing, ordering code, and production requirements.
Is MAX3221CAE+TG1Z suitable for industrial equipment?
The MAX3221CAE+TG1Z is suitable for industrial serial-interface applications when its commercial temperature grade, electrical ratings, and regulatory requirements fit the finished equipment. It provides a one-driver, one-receiver RS-232 interface, +3V to +5.5V operation, and a 1 µA AutoShutdown state. Industrial designs should additionally verify operating-temperature limits, surge protection, connector grounding, and the applicable compliance requirements for the complete product.
What is the lead time for MAX3221CAE+TG1Z?
The current manufacturer lead time and lot availability for MAX3221CAE+TG1Z should be requested through the Request a Quote form on this page. The part is identified as a commercial-temperature, 16-SSOP MAX3221 ordering option, and the official Analog Devices product page lists the MAX3221 family. A quotation request allows the current production status, packaging, and delivery schedule to be confirmed for the exact suffix.
Where can I buy MAX3221CAE+TG1Z online?
Request a quote for MAX3221CAE+TG1Z through the Request a Quote form on this page to confirm current availability, order quantity, and delivery timing for the exact tape-and-reel ordering code. The part is listed as a commercial-temperature, 16-SSOP MAX3221 device with one driver and one receiver. The form avoids static pricing while allowing current channel and assembly requirements to be checked.
How much does MAX3221CAE+TG1Z cost?
Use the Request a Quote form on this page to obtain the current price and quantity breaks for MAX3221CAE+TG1Z. The quote should reference the complete ordering suffix, including the commercial-temperature and tape-and-reel configuration. Because availability and pricing can change with quantity, inventory, and packaging, the live quote is the appropriate source for a procurement decision.

工程參考資料,適用於 MAX3221CAE+TG1Z — 比較、設計指引及合規資訊。

選型指南

Choose MAX3221CAE+TG1Z when the design needs one RS-232 transmitter and one receiver, a +3V to +5.5V supply, and the exact 16-SSOP commercial-temperature tape-and-reel configuration. MAX3221CSE+ is the closest same-family selection when its narrower SSOP dimensions and terminal geometry match the PCB. MAX3232CSE+ or MAX3223CSE+ can be considered for similarly shaped 1/1 interfaces after their pin definitions and AutoShutdown behavior are checked. MAX3227CSE+ requires the same family-level verification, while MAX3243CSE+ adds two receiver channels and is unnecessary for a single-link design. For any alternative, confirm the package drawing, voltage limits, charge-pump capacitor arrangement, receiver thresholds, and lifecycle status before releasing production artwork.

與替代品比較

參數 本產品 MAX3221CSE+ MAX3232CSE+ MAX3227CSE+ MAX3243CSE+ MAX3223CSE+
Package 16-SSOP 16-SSOP 16-SSOP 16-SSOP 16-SSOP 16-SSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Driver / Receiver Count 1 / 1 1 / 1 1 / 1 1 / 1 1 / 3 1 / 1
Interface Standard Full RS-232 Full RS-232 Full RS-232 Full RS-232 Full RS-232 Full RS-232
Power-Saving Feature AutoShutdown AutoShutdown AutoShutdown AutoShutdown AutoShutdown AutoShutdown

主要差異化特點

  • Single-channel RS-232 interface in a compact SSOP package (對比MAX3243CSE+)
  • Low-power shutdown for intermittent links (對比MAX3223CSE+)
  • True 3.3V-compatible RS-232 operation (對比MAX3232CPW)

設計說明

Use the AutoShutdown behavior as part of the product power budget. The MAX3221CAE+TG1Z reaches 1 µA supply current when no valid receiver signal is detected, but a connected or noisy RS-232 line can affect when that state is recognized. Account for the normal active-state current, external transceiver losses, and system leakage rather than sizing the entire design from the 1 µA figure alone.

Place the charge-pump capacitors, supply bypass capacitor, driver output, and receiver input exactly as shown in the manufacturer application circuit. Keep the SSOP footprint compatible with the selected alternative's terminal numbering and lead dimensions. Route the RS-232 line away from sensitive analog or high-speed digital traces, and connect the transceiver ground reference to the interface ground in accordance with the complete equipment grounding design.

Do not treat an SSOP package code alone as proof of drop-in compatibility. Confirm pin numbering, body width, lead pitch, exposed features, and every electrical threshold in the manufacturer package drawing and datasheet. The MAX3221, MAX3232, MAX3227, MAX3243, and MAX3223 families can differ in shutdown behavior or receiver count even when they share a 16-terminal outline.

RS-232 drivers produce fast edge transitions and can couple noise into adjacent circuitry. Keep the driver return path continuous, use a solid ground reference, and maintain separation from clocks, sensors, and precision analog inputs. At an external connector, apply suitable transient protection and consider cable-length limitations. Verify conducted and radiated emissions at the complete product level because the transceiver package alone does not determine system compliance.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The MAX3221 is an interface IC rather than an automotive-qualified component, so AEC-Q100 is marked not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering suffix.

相關搜尋

MAX3221CAE+TG1Z datasheet MAX3221CAE+TG1Z pinout MAX3221CAE+TG1Z datasheet pdf MAX3221CAE+TG1Z equivalent MAX3221CAE+TG1Z replacement MAX3221CAE+TG1Z drop-in replacement MAX3221CAE+TG1Z price MAX3221CAE+TG1Z stock Analog Devices MAX3221CAE+TG1Z MAX3221CAE+TG1Z 16-SSOP MAX3221CAE+TG1Z 3.3V RS-232 MAX3221CAE+TG1Z AutoShutdown MAX3221CAE+TG1Z vs MAX3232CPW MAX3221CAE+TG1Z industrial adapter MAX3221CAE+TG1Z application circuit

相關元件與詞彙

Analog Devices MAX3221CAE+TG1Z MAX3221CAE+ MAX3221CSE+ MAX3232CSE+ MAX3227CSE+ MAX3243CSE+ MAX3223CSE+ MAX3232CPW RS-232 RS-232 transceiver line transceiver serial interface IC interface IC semiconductor AutoShutdown CMOS logic charge pump 3.3 V 5.5 V 1 µA 16-SSOP gull wing surface mount industrial serial adapter
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情