Analog Devices

MAX3243CAI+TG1Z - 3/5 RS-232 Transceiver | Analog Devices

料号: MAX3243CAI+TG1Z ✓ 量产中
+3 V to +5.5 V Vdss 1 µA Id 28-pin SSOP Package
最小起订量: 1 |

MAX3243CAI+TG1Z 概述

Analog Devices MAX3243CAI+TG1Z is a 3-driver/5-receiver RS-232 interface transceiver with a 28-pin SSOP package. It supports true +3 V to +5.5 V operation and uses AutoShutdown to reduce supply current to 1 µA when no valid receiver signal is detected. The device combines three RS-232 drivers, five RS-232 receivers, and a complementary always-active receiver for external monitoring. These characteristics place the MAX3243 in the interface IC hierarchy: RS-232 transceiver → serial interface IC → interface IC → semiconductor. It is intended for equipment that must translate between modern digital logic levels and RS-232 signal levels.

The MAX3243 family uses Maxim’s AutoShutdown technology to lower operating power when the connected RS-232 link is inactive. A valid signal on a receiver input causes the supply and drivers to become active, while the absence of a valid signal allows the low-power state to be maintained. This behavior is particularly useful in battery-operated and intermittently connected portable equipment, where an idle serial transceiver could otherwise continue to consume unnecessary power. The operating range of +3 V to +5.5 V permits integration with both 3.3 V and 5 V systems.

The 3/5 channel arrangement supports three outbound RS-232 drivers and five inbound receivers, while the additional always-active receiver provides complementary monitoring information. This makes the device appropriate for console links, instrumentation, industrial control interfaces, configuration ports, and embedded systems that exchange serial commands with external equipment. Compared with a purely unidirectional line-driver or receiver, the integrated transceiver reduces the component count and simplifies bidirectional RS-232 connections.

The MAX3243CAI+TG1Z ordering code identifies a 28-SSOP package offered by Analog Devices/Maxim Integrated. Its integrated interface functionality supports compact designs where board area is important. Because RS-232 uses a single-ended signaling method referenced to ground, the complete circuit also depends on the external charge-pump capacitors, pass capacitors, protection elements, connector, and cable. Those surrounding components determine practical bus-range and signal-integrity behavior in the finished equipment.

A robust implementation should place the required charge-pump capacitors close to their associated pins, connect the interface ground appropriately with the system ground, and provide the protection strategy required by the installation environment. Long or exposed cables can introduce electrostatic discharge, transients, and ground-offset problems that are not solved by the transceiver alone. Application review should therefore include the cable length, operating environment, logic levels, and whether the connected system requires hardware handshaking.

This product page summarizes the verified manufacturer identity, channel configuration, supply range, shutdown behavior, package, and ordering code. It also organizes functional applications, design cautions, candidate replacements, and specification comparisons so that engineers can assess fit quickly while treating the MAX3243 datasheet as the governing technical document.

直接替换替代料: MAX3243CAI+TG1Z ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MAX3243CAI+TG1Z (相同外形与封装尺寸) ——差异在于 Product Type, Supply Voltage Range.

Analog Devices
Product Type: 3/5 RS-232 transceiver
Supply Voltage Range: 3.0V to 5.5V
对比 MAX3243CAI+TG1Z →

MAX3243ECAI+TG1Z

✅ 直接替换
Analog Devices
📦 28-pin SSOP
3/5 RS-232 transceiver · 3 drivers · 5 receivers · 1 complementary always-active receiver · 3.0V to 5.5V · 1 µA · 120 kbit/s · EIA/TIA-232, V.28/V.24

联系询价

查看数据手册 →

MAX3243CAI+TG1Z 规格参数

Product Type RS-232 transceiver
Driver Count 3 drivers
Receiver Count 5 receivers
Additional Receiver 1 complementary always-active receiver
Supply Voltage Range +3 V to +5.5 V
Shutdown Supply Current 1 µA
Low-Power Feature AutoShutdown
Signal Standard RS-232
封装 28-pin SSOP
安装类型 Surface mount

MAX3243CAI+TG1Z 28-pin ssop 引脚配置指南

MAX3243CAI+TG1Z(28-pin ssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MAX3243CAI+TG1Z 的 28-pin ssop 封装引脚图

暂无详细引脚数据: MAX3243CAI+TG1Z.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MAX3243CAI+TG1Z 适用于 6 应用s: Portable RS-232 Serial Console, Industrial Instrument Control, Network Equipment Management Port, Embedded System Configuration Link, Robotics and Automation Controller, Medical and Diagnostic Equipment Interface.

📱

Portable RS-232 Serial Console

The MAX3243CAI+TG1Z fits portable diagnostic and configuration consoles that communicate through an RS-232 port. Its three drivers and five receivers support several command and monitoring channels, while the complementary always-active receiver provides an additional monitoring path. The 1 µA AutoShutdown supply current helps reduce consumption when no valid receiver signal is present, making the +3 V to +5.5 V device useful for 3.3 V and 5 V portable equipment. Designers should confirm logic compatibility, provide the required charge-pump capacitors, and use suitable transient protection if the cable leaves the equipment enclosure.

🏭

Industrial Instrument Control

The MAX3243CAI+TG1Z can serve as the RS-232 interface in industrial test and measurement equipment that accepts commands and returns status data. Three driver channels support outbound control signals, five receiver channels accept incoming data, and the always-active complementary receiver supports continuous monitoring. Its true +3 V to +5.5 V supply operation accommodates both 3.3 V and 5 V instrument architectures. For reliable deployment, verify the required operating temperature, implement appropriate cable protection, and design the ground connection carefully to limit common-mode voltage errors across the RS-232 interface.

🌐

Network Equipment Management Port

The MAX3243CAI+TG1Z is appropriate for equipment-management and console connections in networking hardware where an RS-232 service port is retained for configuration, diagnostics, or field maintenance. The integrated 3/5 transceiver arrangement reduces the number of separate line-interface devices, while AutoShutdown lowers standby demand to 1 µA when the port is inactive. The 28-SSOP package supports compact board layouts, and the +3 V to +5.5 V range permits use with both 3.3 V and 5 V system rails. Production designs should assess whether the management port requires galvanic isolation rather than relying on the interface IC alone.

🧩

Embedded System Configuration Link

The MAX3243CAI+TG1Z can connect an embedded controller to a legacy RS-232 configuration device during manufacturing, service, or field diagnostics. Three driver channels can carry multiple outbound commands, and five receiver channels provide flexibility for status, acknowledgments, and monitoring signals. Its 1 µA AutoShutdown mode is useful when the embedded product spends substantial time disconnected from the service port. The +3 V to +5.5 V operating range supports both modern controller rails and 5 V service equipment. Verify logic levels and connector polarity, and place the charge-pump and bypass capacitors close to the device.

🏭

Robotics and Automation Controller

The MAX3243CAI+TG1Z can provide an RS-232 service and programming link for robotic or factory automation controllers. The three-driver, five-receiver configuration supports command, status, and monitoring channels without requiring separate driver and receiver packages. Its compact 28-SSOP construction assists board-space-constrained designs, while the 1 µA shutdown state improves standby efficiency when the service connector is unused. In automation environments, add suitable surge and ESD protection, maintain predictable grounding, and validate the full operating temperature range against the machine’s environmental requirements before release.

💊

Medical and Diagnostic Equipment Interface

The MAX3243CAI+TG1Z can be used for service, configuration, or external-monitor connections in medical and diagnostic equipment where RS-232 remains part of the system architecture. The always-active complementary receiver supports external monitoring, and the three driver channels support multiple outbound control functions. The 1 µA AutoShutdown current reduces standby load when the interface is disconnected. Because this is a line-interface component rather than an isolation barrier, systems requiring patient-contact isolation, reinforced separation, or regulatory safeguards must add the appropriate protection architecture and verify all applicable medical requirements.

What is the MAX3243CAI+TG1Z?
The MAX3243CAI+TG1Z is a 3-driver/5-receiver RS-232 transceiver from Analog Devices in a 28-pin SSOP package. It also provides a complementary always-active receiver for external monitoring. According to the Analog Devices MAX3243 product page, the device supports true +3 V to +5.5 V operation and uses AutoShutdown to reduce supply current to 1 µA when no valid receiver signal is detected.
Where can I download the MAX3243CAI+TG1Z datasheet?
The MAX3243CAI+TG1Z datasheet is available from the official Analog Devices MAX3243 product page at https://www.analog.com/en/products/max3243.html. That page is the appropriate starting point for the family datasheet, package options, electrical characteristics, and ordering information. The MAX3243CAI+TG1Z ordering code identifies the 28-SSOP configuration and tape-and-reel presentation.
What are the key specifications of MAX3243CAI+TG1Z that engineers should know?
The principal MAX3243CAI+TG1Z specifications are three RS-232 drivers, five RS-232 receivers, one complementary always-active receiver, a +3 V to +5.5 V supply range, and a 1 µA AutoShutdown supply current. The Analog Devices product page identifies the device as a 28-pin family option. The MAX3243CAI+TG1Z ordering code corresponds to the 28-SSOP packaging shown in the product listing.
How does AutoShutdown work in the MAX3243CAI+TG1Z?
AutoShutdown reduces the MAX3243CAI+TG1Z supply current to 1 µA when its receiver inputs do not detect a valid signal level. When a valid signal is present, the onboard supply and drivers resume normal operation. According to the Analog Devices MAX3243 product information, this behavior is useful for lowering standby consumption in portable or intermittently connected RS-232 equipment.
Is the MAX3243CAI+TG1Z suitable for 3.3 V and 5 V systems?
Yes, the MAX3243CAI+TG1Z supports a true +3 V to +5.5 V supply range, making it suitable for both 3.3 V and 5 V equipment. The RS-232 line interface operates from the device supply, while the digital-facing logic interface must also be checked against the connected controller’s voltage levels. The Analog Devices MAX3243 product page confirms the stated supply range and AutoShutdown capability.
Where is the MAX3243CAI+TG1Z pinout located?
The MAX3243CAI+TG1Z pinout is identified in the MAX3243 manufacturer documentation for the 28-SSOP package. Use the pin-description table and package drawing in the official MAX3243 datasheet when assigning PCB tracks, especially for charge-pump capacitors, receiver inputs, driver outputs, and supply connections. A complete pin-by-pin list is not reproduced on this page because the accessible product information does not enumerate every terminal name.
What can replace MAX3243CAI+TG1Z on the same PCB?
The closest verified same-family drop-in candidate is the Analog Devices MAX3243ECAI+TG1Z in the same 28-SSOP format. Its core RS-232 channel configuration, +3 V to +5.5 V supply range, and AutoShutdown behavior align with the MAX3243CAI+TG1Z, while the ordering suffix indicates a different qualification variant. Review the temperature grade and full ordering table before substitution.
Is MAX3243CAI+TG1Z the same as MAX3243ECAI+TG1Z?
The MAX3243CAI+TG1Z and MAX3243ECAI+TG1Z are closely related 28-SSOP members of the MAX3243 family, but their ordering suffixes must not be treated as automatically identical. The verified listings show the same 3/5 RS-232 transceiver configuration and the same package format. The exact temperature-grade and qualification differences should be confirmed from the manufacturer ordering table before using one as a production substitute.
MAX3243CAI+TG1Z vs MAX3243ECAI+TG1Z: which should I choose?
Choose the MAX3243CAI+TG1Z when its ordering suffix matches the required environmental and qualification criteria for the target product. Consider the MAX3243ECAI+TG1Z when its temperature grade better fits the application and the manufacturer confirms the same 28-SSOP footprint and pin assignment. Both provide the same verified 3-driver/5-receiver architecture and +3 V to +5.5 V operating range.
When should I choose the MAX3243CAI+TG1Z for a new design?
Choose the MAX3243CAI+TG1Z when the design needs a compact RS-232 interface with three drivers, five receivers, an always-active complementary receiver, and low standby consumption. Its 1 µA AutoShutdown current is valuable for portable or intermittently connected systems. The +3 V to +5.5 V supply range also supports both 3.3 V and 5 V powered equipment.
Is the MAX3243CAI+TG1Z suitable for industrial and instrumentation ports?
The MAX3243CAI+TG1Z is functionally suitable for RS-232 console, instrumentation, and industrial equipment interfaces because it combines three drivers, five receivers, and a complementary always-active receiver in one 28-SSOP device. For industrial deployment, also verify the required operating temperature, isolation, surge protection, grounding, and cable length. The transceiver alone does not provide reinforced isolation or complete surge protection.
Where can I buy MAX3243CAI+TG1Z and what is its lead time?
Use the Request a Quote form on this page to request current MAX3243CAI+TG1Z availability, unit pricing, minimum order quantity, and lead time. The device is listed as a 3/5 full-RS-232 transceiver in a 28-SSOP package, with the ordering suffix indicating a tape-and-reel presentation. Current commercial terms should be confirmed directly through the quote workflow.
How much does the MAX3243CAI+TG1Z cost?
Current MAX3243CAI+TG1Z pricing is displayed through the Request a Quote form on this page. The form can provide a quantity-based quotation for the exact 28-SSOP ordering code rather than a generic MAX3243 family price. Requesting the quote with your required quantities also allows procurement to confirm stock, order multiples, and scheduled delivery.
Is MAX3243CAI+TG1Z in stock?
Current stock for the exact MAX3243CAI+TG1Z ordering code should be confirmed through the Request a Quote form on this page. Because inventory changes by package suffix, customer location, and order quantity, the quote response is the appropriate source for allocation and delivery information. Use the full MAX3243CAI+TG1Z MPN when requesting stock rather than searching only by the MAX3243 family name.
What is the best Analog Devices equivalent for MAX3243CAI+TG1Z?
The best verified Analog Devices-family equivalent is the MAX3243ECAI+TG1Z because it uses the same 28-SSOP format and retains the 3-driver/5-receiver RS-232 architecture. The two ordering codes differ in suffix classification, so qualification and temperature requirements must be checked in the manufacturer ordering table. No equally documented drop-in equivalent from another manufacturer was established for the exact target.

工程参考数据: MAX3243CAI+TG1Z ——对比、设计指导和合规信息。

选型指南

Choose the MAX3243CAI+TG1Z when the design needs a compact 28-SSOP RS-232 interface with three drivers, five receivers, an always-active monitoring receiver, and 1 µA AutoShutdown operation. Its +3 V to +5.5 V range supports both 3.3 V and 5 V systems. The MAX3243ECAI+TG1Z is the closest verified same-family drop-in candidate because it retains the same package, channel arrangement, supply range, and shutdown behavior; select it when its suffix classification matches the required temperature or qualification conditions. MAX3232-family devices may serve similar communication tasks, but the verified listing describes a different family and does not establish the same 3/5 channel arrangement, so they should not be treated as automatic replacements. Cross-brand alternatives were not included because the available cross-reference results did not document a same-package, pin-compatible substitute with sufficient parametric detail. Before ordering, verify the exact ordering table, pin assignment, external capacitor network, operating-temperature grade, and lifecycle status.

与替代料对比

参数 本产品 MAX3243ECAI+TG1Z
Package 28-pin SSOP 28-pin SSOP
Brand Analog Devices Analog Devices
Driver Count 3 drivers 3 drivers
Receiver Count 5 receivers 5 receivers
Always-Active Receiver 1 complementary always-active receiver 1 complementary always-active receiver
Supply Voltage Range +3 V to +5.5 V +3 V to +5.5 V
AutoShutdown Supply Current 1 µA 1 µA
Signal Standard RS-232 RS-232
Low-Power Feature AutoShutdown AutoShutdown

关键差异点

  • Five receiver channels plus dedicated monitoring (对比 MAX3243ECAI+TG1Z)
  • Low 1 µA AutoShutdown supply current (对比 MAX3243ECAI+TG1Z)
  • Wide 3.3 V and 5 V system compatibility (对比 MAX3243ECAI+TG1Z)

设计说明

Place the MAX3243 charge-pump capacitors, supply bypass capacitor, and receiver or driver interface components close to their associated package pins. Keep the charge-pump loop compact to reduce radiated noise and switching transients on the board. Route each RS-232 conductor directly toward its connector or protection circuit, and avoid sharing narrow paths with sensitive analog or high-speed digital nets.

Treat RS-232 ground as a current-return path and size the connection for the interface current rather than treating it as an optional shield lead. Long or externally exposed cables can develop ground-potential differences that disrupt receiver thresholds. Evaluate the complete signal path, connector, cable, and protection network, and include a sustained load in system testing because added receiver loads can change the effective RS-232 voltage margin.

Do not assume the +3 V to +5.5 V supply rating also guarantees compatibility with every connected logic signal. Confirm the controller-side input and output levels, AutoShutdown activation behavior, and the complete external-capacitor configuration using the MAX3243 datasheet. Also confirm the ordering suffix, operating-temperature grade, and production availability before treating a similarly named MAX3243 device as a drop-in replacement.

RS-232 drivers are intended for moderate-speed, point-to-point links rather than long high-frequency buses. Keep cables away from switching nodes and noisy power stages where practical, and use filtering at the connector when required by the installation. The AutoShutdown circuit changes operating activity in response to receiver inputs, so unusual idle patterns or floating signals should be tested to ensure the intended low-power state is reached and released correctly.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product page and distributor snippets do not state the requested compliance confirmations. The + suffix and lead-free status must be confirmed in the manufacturer ordering information rather than inferred.

相关搜索

MAX3243CAI+TG1Z datasheet MAX3243CAI+TG1Z pinout MAX3243CAI+TG1Z datasheet pdf MAX3243CAI+TG1Z equivalent MAX3243CAI+TG1Z replacement MAX3243CAI+TG1Z cross reference MAX3243CAI+TG1Z price MAX3243CAI+TG1Z stock Analog Devices MAX3243CAI+TG1Z MAX3243CAI+TG1Z vs MAX3243ECAI+TG1Z MAX3243 28-SSOP pinout MAX3243 RS-232 application circuit

相关元器件 & 术语

Analog Devices MAX3243CAI+TG1Z MAX3243ECAI+TG1Z MAX3243 RS-232 RS-232 transceiver serial interface IC interface IC semiconductor 3/5 transceiver AutoShutdown low-dropout receiver complementary always-active receiver RS-232 driver RS-232 receiver true +3 V to +5.5 V operation 1 µA supply current 28-pin SSOP SSOP family surface-mount package charge-pump capacitor RS-232 common-mode voltage industrial control interface portable serial console
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情