Texas Instruments

MAX3243CDW - 3-5.5V 250kbps RS-232 Transceiver | Texas Instruments

料号: MAX3243CDW ✓ 量产中
3 V to 5.5 V Vdss 28-pin SOIC Package
最小起订量: 1 |

MAX3243CDW 概述

Texas Instruments MAX3243CDW is a multichannel RS-232 line driver and receiver interface IC with a 3 V to 5.5 V supply range, data rate up to 250 kbps, and ±15 kV human-body-model ESD protection on the serial interface pins. The device is packaged in a 28-pin SOIC and combines three line drivers with five line receivers for full-duplex serial-interface designs.

An RS-232 transceiver is an interface integrated circuit that converts logic-level signals into balanced, single-ended RS-232 line voltages and converts received line voltages back into logic levels. The MAX3243 belongs to the multi-channel transceiver class within the broader hierarchy of interface ICs, serial communication controllers, and semiconductor signal-conditioning devices. Its integrated driver and receiver channels reduce the number of separate components required in legacy serial ports, industrial control links, and service interfaces.

The three-driver and five-receiver configuration allows one connector to support several RS-232 signals without using five unrelated transceivers. Operation from 3 V to 5.5 V makes the device suitable for systems that use 3.3 V or 5 V control electronics. The specified 250 kbps data rate covers legacy serial communication while providing useful margin below faster RS-485 interfaces. The ±15 kV HBM protection rating strengthens the connector-side interface against electrostatic discharge events.

Internally, the MAX3243 uses charge-pump circuitry to generate the voltage levels required by RS-232 transmitters. The three drivers add the required line signal, while the five receivers detect and condition incoming signals. The asymmetric channel count supports designs in which a system transmits on three lines and monitors five incoming lines, including handshake, status, and acknowledgment signals.

Typical uses include industrial control panels, data-acquisition equipment, instrumentation, embedded service consoles, and legacy peripheral connections. It is particularly suitable where a modern controller must retain compatibility with an established RS-232 port but also needs a compact multi-channel interface. A single transceiver can consolidate several point-to-point or multidrop-compatible links when the system designer follows the RS-232 topology correctly.

PCB design should keep the charge-pump and interface circuitry on the manufacturer's recommended layout and provide the required bypass capacitance close to the supply pins. Keep serial traces short, provide the intended common-mode return path, and use suitable protection networks where cables leave the enclosure. Do not infer that the HBM rating eliminates the need for external surge protection on long or unprotected cable runs.

This product page consolidates the manufacturer specifications, channel configuration, source links, drop-in comparison, and implementation guidance into a design-focused reference. Engineers can use the comparison and selection guidance to evaluate the MAX3243CDW alongside pin-compatible alternatives, while the application notes clarify where its 28-pin SOIC interface fits in embedded and industrial serial systems.

直接替换替代料: MAX3243CDW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MAX3243EWR

✅ 直接替换 ⚠️ 规格未核验
📦 28-pin SOIC
Same 28-pin SOIC MAX3243 family with a different manufacturer ordering code and temperature-grade designation; core 3 V to 5.5 V, 250 kbps, 3/5 channel configuration remains aligned.

📋 参考替代料(不在目录中)

SN65C3243DBR

✅ 直接替换
📦 28-pin SOIC
Same three-driver, five-receiver arrangement and ±15 kV HBM protection; detailed operating limits, timing, and temperature grade must be compared before substitution.

📋 参考替代料(不在目录中)

MAX3243CDW 规格参数

Product Type Multichannel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Number of Drivers 3
Number of Receivers 5
ESD Protection ±15 kV HBM
封装 28-pin SOIC
安装类型 Surface mount
Signal Standard RS-232

MAX3243CDW 28-pin soic 引脚配置指南

MAX3243CDW(28-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MAX3243CDW 的 28-pin soic 封装引脚图

暂无详细引脚数据: MAX3243CDW.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MAX3243CDW 适用于 6 应用s: Industrial Control Panel Interface, Data Acquisition Instrument, Legacy Peripheral Connection, Embedded Service Console, Instrumentation Communication Hub, RS-232 Test and Measurement Adapter.

🏭

Industrial Control Panel Interface

The MAX3243CDW fits industrial control panels that retain an RS-232 service port while also exchanging status and acknowledgment signals. Its three drivers can support outgoing command or control lines, and five receivers can monitor incoming equipment states through a 28-pin SOIC. The 3 V to 5.5 V supply range supports both 3.3 V and 5 V embedded controller platforms. At a maximum rate of 250 kbps, it is appropriate for legacy RS-232 service traffic rather than high-speed differential data. Its ±15 kV HBM interface protection adds useful robustness, although cable-side surge protection and proper grounding remain important in industrial installations.

📟

Data Acquisition Instrument

The MAX3243CDW can consolidate legacy RS-232 command, measurement, and status lines in a data-acquisition instrument. A single 28-pin SOIC provides three transmit channels and five receive channels, reducing the board area needed for separate line-driver and receiver ICs. Its 250 kbps maximum rate is suitable for configuration commands and periodic measurement results. Operation from 3 V to 5.5 V allows the same transceiver to be used beside modern 3.3 V control logic or conventional 5 V interface circuits. Designers should follow the manufacturer bypass-capacitor and charge-pump layout while adding suitable protection if the instrument cable exits the enclosure.

🖨️

Legacy Peripheral Connection

The MAX3243CDW is useful for embedded systems that must communicate with a legacy printer, scanner, controller, or service peripheral through RS-232. Three drivers and five receivers permit simultaneous control, status, and handshake signals rather than limiting the system to a single transmit-and-receive pair. The device supports a 3 V to 5.5 V supply, so it can fit both modern and older system architectures. Its 250 kbps ceiling covers typical peripheral command protocols while remaining within the intended RS-232 operating class. Verify connector signal assignments and ground continuity, and avoid treating the internal ESD rating as a substitute for enclosure-level cable protection.

🖥️

Embedded Service Console

The MAX3243CDW supports embedded service consoles that need several communication lines for diagnostics, configuration, and status reporting. Three drivers can carry commands or control signals toward a service host, while five receivers can bring back acknowledgment and diagnostic signals. The 28-pin SOIC package supports compact board layouts, and the 3 V to 5.5 V range accommodates common embedded supply levels. The 250 kbps maximum data rate is appropriate for textual menus, diagnostic logs, and low-bandwidth firmware service protocols. Keep the RS-232 traces short, implement the manufacturer-recommended bypass network, and assess whether the external cable requires additional surge or ESD protection.

📊

Instrumentation Communication Hub

The MAX3243CDW can serve as an RS-232 communication hub within a multi-instrument test system. Its asymmetric 3/5 channel arrangement allows three outgoing control or status paths and five incoming measurement or ready signals to share one transceiver footprint. The device’s 250 kbps rate matches many legacy instrumentation protocols, while the 3 V to 5.5 V operating range simplifies interoperability with mixed-generation test equipment. Because RS-232 is a single-ended interface, each connected circuit must share an appropriate signal ground. Route driver and receiver paths to avoid noisy digital sources, follow the charge-pump layout, and add external protection for long laboratory or factory cables.

🔧

RS-232 Test and Measurement Adapter

The MAX3243CDW is appropriate for a compact RS-232 test adapter that bridges a modern controller to equipment using multiple legacy signals. Three drivers support control and status outputs, and five receivers support response and handshake inputs, all within a 28-pin SOIC. The device operates from 3 V to 5.5 V and reaches 250 kbps, which is appropriate for many instrument-control protocols. In an adapter, preserve the connector’s RS-232 signal and ground assignments rather than treating it as an RS-485 or TTL interface. Validate every pin against the manufacturer datasheet, provide local bypass capacitance, and include appropriate surge protection for cables connected outside the test bench.

推荐产品汇总

MAX3243EWR Same-family 28-pin SOIC RS-232 transceiver candidate 用于: Industrial Control Panel Interface, Legacy Peripheral Connection, Instrumentation Communication Hub SN65C3243DBR Pin-compatible three-driver, five-receiver interface candidate 用于: Industrial Control Panel Interface, Data Acquisition Instrument, Legacy Peripheral Connection, Embedded Service Console, Instrumentation Communication Hub, RS-232 Test and Measurement Adapter MAX3243CDW Texas Instruments 用于: Data Acquisition Instrument, Embedded Service Console, RS-232 Test and Measurement Adapter
What is the operating voltage of MAX3243CDW?
The MAX3243CDW operates from 3 V to 5.5 V. According to the Texas Instruments MAX3243 product page, this range supports both 3.3 V and 5 V system rails. The device is a multichannel RS-232 transceiver with three drivers and five receivers. Use the manufacturer's power-supply recommendations and bypass-capacitor layout when connecting it to either supply range.
What are the key specifications of MAX3243CDW that engineers should know?
The MAX3243CDW combines a 3 V to 5.5 V supply range, a maximum data rate of 250 kbps, three RS-232 drivers, five receivers, and ±15 kV HBM ESD protection. It is offered in a 28-pin SOIC. These characteristics make it suitable for compact legacy serial interfaces, industrial equipment, and service connections requiring multiple RS-232 channels.
How many RS-232 drivers and receivers does MAX3243CDW contain?
The MAX3243CDW contains three line drivers and five line receivers. The Texas Instruments MAX3243 product page identifies it as a multichannel RS-232 device, while the MAX3243CDW listing identifies the exact 28-SOIC orderable variant. This 3/5 arrangement is useful when a system must transmit on three RS-232 lines and receive on five lines.
What is the maximum data rate of MAX3243CDW?
The MAX3243CDW supports data rates up to 250 kbps. Texas Instruments describes the MAX3243 as a 3 V to 5.5 V multichannel 250 kbps RS-232 line driver/receiver. This rate is intended for RS-232 links and should not be confused with the much higher signaling rates commonly associated with RS-485 or differential Ethernet interfaces.
Where can I download the MAX3243CDW datasheet PDF?
The official MAX3243 datasheet and ordering information are available from the Texas Instruments MAX3243 product page at https://www.ti.com/product/MAX3243. Use the datasheet linked from that page for the complete pin descriptions, electrical characteristics, recommended operating conditions, charge-pump details, and application schematic.
Where can I find the MAX3243CDW pinout?
Use the pin-description table in the Texas Instruments MAX3243 datasheet linked from the official product page to assign the 28 SOIC connections. The MAX3243CDW is a 28-pin SOIC device with three driver channels and five receiver channels. Verify signal names, charge-pump terminals, bypass-capacitor connections, and no-connect positions directly against the datasheet before laying out the PCB.
What can replace MAX3243CDW?
A drop-in replacement must use the same 28-pin SOIC footprint and preserve the three-driver, five-receiver RS-232 interface. The SN65C3243DBR is a documented cross-brand comparison candidate with the same three-driver, five-receiver arrangement and ±15 kV HBM protection. Confirm supply limits, timing, logic levels, and every pin against both manufacturers’ datasheets before approving a substitution.
Is MAX3243CDW the same as SN65C3243DBR?
They are not identical devices, but the SN65C3243DBR is a close pin-compatible candidate for design review. It has three line drivers, five receivers, dual charge-pump circuitry, and ±15 kV HBM ESD protection, matching the principal channel counts associated with the MAX3243CDW. Verify pin functions and operating limits in both datasheets before treating it as a production substitute.
Where to buy MAX3243CDW online?
Use the Request a Quote form on this page to request MAX3243CDW pricing, availability, lead time, and the required ordering quantity. The form provides a single purchasing channel without requiring you to compare multiple seller pages. For design qualification, confirm the exact MAX3243CDW suffix and 28-pin SOIC package when submitting the request.
What is the price of MAX3243CDW?
The current MAX3243CDW price is shown through the Request a Quote form on this page rather than as a static figure. Submit the required quantity, target package, and delivery location to obtain current commercial terms. This approach also helps the distributor confirm stock, lead time, and any volume-dependent conditions for the exact 28-pin SOIC orderable part.
What is the lead time for MAX3243CDW?
Request the current lead time for MAX3243CDW through the Request a Quote form on this page. Lead time can depend on order quantity, inventory position, production scheduling, and delivery location, so it should be confirmed for each purchase rather than treated as a fixed product attribute. Include your required quantity and target date in the request.
Is MAX3243CDW suitable for industrial RS-232 equipment?
The MAX3243CDW is suitable for many industrial RS-232 interfaces because it provides three drivers, five receivers, 250 kbps operation, and ±15 kV HBM protection in a 28-pin SOIC. Industrial suitability still depends on the device’s operating-temperature rating, system isolation requirements, cable protection, and environmental qualification. Confirm those specifications before releasing an industrial production design.
When should I choose MAX3243CDW over a similar RS-232 transceiver?
Choose MAX3243CDW when the design needs a compact 28-pin SOIC interface with three RS-232 drivers, five receivers, operation from 3 V to 5.5 V, and a maximum rate of 250 kbps. Choose another candidate only when it offers a necessary advantage such as a different temperature grade, documented pin compatibility, or a verified supply feature. Confirm the replacement against the full pin and electrical tables.
MAX3243CDW vs SN65C3243DBR - which is better for a new design?
The MAX3243CDW is the preferred starting point when its 28-pin SOIC, 3 V to 5.5 V supply range, three drivers, five receivers, 250 kbps rate, and ±15 kV HBM rating satisfy the design. The SN65C3243DBR is a reasonable second-source candidate because its channel configuration and HBM rating align. The better choice depends on verified pin mapping, temperature grade, timing, and lifecycle requirements.
Does the ±15 kV ESD rating eliminate external RS-232 protection?
No. The ±15 kV HBM rating protects the MAX3243CDW against human-body-model electrostatic discharge on the designated interface pins, but it does not eliminate every cable-borne surge or lightning threat. Industrial and outdoor installations may still require external TVS devices, isolation, surge protection, and proper grounding. Confirm the protection topology against the actual cable environment.

工程参考数据: MAX3243CDW ——对比、设计指导和合规信息。

选型指南

Choose the MAX3243CDW when a design requires a 28-pin SOIC RS-232 interface with three drivers, five receivers, operation from 3 V to 5.5 V, and a maximum data rate of 250 kbps. It is particularly suitable for industrial controls, instrumentation, legacy peripherals, and service consoles where several legacy signals must be consolidated. Review MAX3243EWR when a same-family ordering code with a different temperature-grade designation better matches the production environment. Consider the SN65C3243DBR as a second-source candidate because its three-driver, five-receiver configuration, dual charge-pump design, and ±15 kV HBM rating align closely. Before replacing the MAX3243CDW, compare all 28 pins, supply limits, electrical characteristics, timing, operating temperature, package dimensions, and lifecycle status. Neither alternative should be approved from channel count alone.

与替代料对比

参数 本产品 MAX3243EWR SN65C3243DBR
Brand Texas Instruments Texas Instruments Texas Instruments
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC
Number of Drivers 3 3 3
Number of Receivers 5 5 5
ESD Protection ±15 kV HBM ±15 kV HBM ±15 kV HBM
Signal Standard RS-232 RS-232 RS-232
Charge-Pump Architecture Integrated RS-232 charge-pump circuitry Integrated RS-232 charge-pump circuitry Dual charge-pump circuit

关键差异点

  • Three transmitters and five receivers in one interface device (对比 SN65C3243DBR)
  • Single-device consolidation of common RS-232 signals (对比 MAX3243EWR)
  • Explicit 250 kbps operating-rate specification (对比 SN65C3243DBR)

设计说明

Place the required bypass capacitor and charge-pump components exactly as shown in the Texas Instruments MAX3243 datasheet. Keep the supply and charge-pump nodes compact because long loops can increase radiated noise and reduce transient margin. Connect the exposed connections, where applicable, using the prescribed ground and layout pattern rather than substituting general analog-layout conventions.

Keep RS-232 driver and receiver traces away from switching nodes, high-current return paths, and clocks with fast edges. The MAX3243 generates charge-pump energy internally, so the physical arrangement of its surrounding components is important even though the data rate is only 250 kbps. Preserve the intended signal-ground topology and avoid routing serial traces beneath the charge-pump section.

Do not assume the ±15 kV HBM rating covers lightning, industrial surges, or every connector event. For cables leaving an enclosure, assess whether external TVS devices, surge suppression, or isolation are needed. Also confirm the exact 28-pin SOIC pin mapping and connector assignments; a mechanically similar RS-232 transceiver is not necessarily interchangeable without a full pin and electrical comparison.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified in the referenced manufacturer and distributor pages. AEC-Q100 qualification is not indicated for this commercial interface device.

相关搜索

max3243c datasheet MAX3243CDW datasheet pdf MAX3243CDW pinout MAX3243CDW specifications MAX3243CDW RS-232 transceiver Texas Instruments MAX3243CDW MAX3243CDW 3V 5.5V MAX3243CDW 250kbps MAX3243CDW 28-SOIC MAX3243CDW replacement MAX3243CDW equivalent MAX3243CDW vs SN65C3243DBR MAX3243CDW price MAX3243CDW stock MAX3243CDW industrial RS-232

相关元器件 & 术语

Texas Instruments MAX3243CDW MAX3243EWR SN65C3243DBR MAX3243 RS-232 RS-232 transceiver multichannel line driver/receiver interface IC serial communication charge-pump circuit ESD protection HBM 3 V to 5.5 V 250 kbps 3 drivers 5 receivers 28-pin SOIC SOIC package family surface-mount package industrial control data acquisition legacy peripheral instrumentation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情