Analog Devices

MAX3243EAI+TG1Z - 3.3V RS-232 Transceiver | Analog Devices

料号: MAX3243EAI+TG1Z ✗ 停产
+3 V to +5.5 V Vdss 1 A Id 28-pin SSOP Package
最小起订量: 1 |

MAX3243EAI+TG1Z 概述

Analog Devices MAX3243EAI+TG1Z is a 3-transmitter, 5-receiver RS-232 communications interface IC operating from +3 V to +5.5 V, supplied in a 28-pin SSOP package. The family supports EIA/TIA-232 and V.28/V.24 communications, automatic shutdown and wakeup behavior, high-data-rate operation, and enhanced electrostatic-discharge protection. Its 1 A supply-current rating identifies it as the MAX3243E family member suited to multi-port RS-232 equipment.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals back into logic-level voltages. It belongs to the transceiver class within interface ICs and ultimately to the broader semiconductor and wired-communications hierarchy. The MAX3243 combines three transmitters, five receivers, and an always-active receiver designed for external monitoring, reducing the number of separate interface devices required in multi-channel equipment.

Principal features include three powered drivers, five receiver channels, operation from a 3 V supply, automatic shutdown and wakeup functions, and enhanced ESD protection. The automatic power-control functions help a system reduce consumption when the communication port is idle, while the always-active receiver permits continuous monitoring of an external RS-232 connection. These functions are especially useful in industrial controllers, test equipment, and embedded systems that combine communication and low-power operating modes.

The MAX3243E family is built for bidirectional point-to-point serial links using the EIA/TIA-232 standard. Each transmitter provides the voltage swing required by an RS-232 receiver, and each receiver translates the bipolar line voltage into a compatible digital signal. The interface operates from the same 3 V to 5.5 V supply range used by many modern embedded processors, reducing the need for a separate high-voltage interface supply. Exact data-rate, slew-rate, propagation-delay, and channel-isolation limits should be taken from the manufacturer datasheet for the selected temperature and supply conditions.

Typical applications include multi-port RS-232 instrumentation, industrial serial controllers, data-acquisition equipment, point-of-sale terminals, and service interfaces for embedded systems. The five receivers are useful when the product must monitor more than one incoming RS-232 signal, while three transmitters support several outbound connections. In portable or industrial equipment, automatic shutdown and wakeup can help control current use when no active peer device is present on the bus.

PCB design should preserve the RS-232 interface’s intended impedance and noise behavior, with short connections between the transceiver, protection network, connector, and ground structure. Place the interface-supply decoupling capacitor close to the device and route high-current return paths away from sensitive logic. Before a board revision, verify every signal, enable, and supply connection against the manufacturer pin-description table for the 28-pin SSOP variant.

This page combines the manufacturer’s family-level capabilities with exact package and ordering information for MAX3243EAI+TG1Z, then adds application guidance, design checks, and compatible family references. It is intended to help engineers confirm supply compatibility, channel count, package reuse, and the design implications of automatic RS-232 shutdown before releasing a PCB or production build.

直接替换替代料: MAX3243EAI+TG1Z ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MAX3243EAI+TG1Z (相同外形与封装尺寸) ——差异在于 Product Type, Supply Voltage Range, ESD Protection, Maximum Data Rate, Shutdown Supply Current.

Maxim Integrated
Product Type: RS-232 transceiver
Maximum Data Rate: 235 kbps
Shutdown Supply Current: 1 µA
对比 MAX3243EAI+TG1Z →
Analog Devices
Product Type: 3/5 RS-232 transceiver
Supply Voltage Range: 3.0 V to 5.5 V
ESD Protection: +/-15 kV
对比 MAX3243EAI+TG1Z →
Analog Devices
Product Type: RS-232 transceiver
Supply Voltage Range: 3.0V to 5.5V
ESD Protection: ±15kV
对比 MAX3243EAI+TG1Z →

MAX3243EEAI+TG1Z

✅ 直接替换
Analog Devices
📦 28-pin SSOP
3/5 RS-232 transceiver · 3 drivers · 5 receivers · 3.0 V to 5.5 V · 250 kbps · +/-15 kV · 1 uA typical · EIA/TIA-232, V.28, V.24

联系询价

查看数据手册 →

MAX3243EAI+

✅ 直接替换
Maxim Integrated
📦 28-pin SSOP
RS-232 transceiver · 3 · 5 · +3 V to +5.5 V · 235 kbps · 1 µA · AutoShutdown and automatic wake-up · Dual charge-pump circuit

联系询价

查看数据手册 →

MAX3243EAI+G1Z

✅ 直接替换
Analog Devices
📦 28-pin SSOP
RS-232 line driver and receiver transceiver IC · 3 V to 5.5 V · 250 kbps · 3 drivers · 5 receivers · ±15 kV HBM · 1 µA · AutoShutdown automatic shutdown and wake-up

联系询价

查看数据手册 →

MAX3243EEUI+T

✅ 直接替换
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 drivers · 5 receivers · Full duplex · ±15kV · 1µA

联系询价

查看数据手册 →

MAX3243EAI+TG1Z 规格参数

Product Type RS-232 transceiver interface IC
Number of Transmitters 3 channels
Number of Receivers 5 channels
Supply Voltage Range +3 V to +5.5 V
Supply Current Rating 1 A
Communication Standard EIA/TIA-232
Supported Protocol V.28 and V.24
Power Management Automatic shutdown and wakeup
ESD Protection Enhanced electrostatic discharge protection
Always-Active Receiver 1 receiver channel
封装 28-pin SSOP
安装类型 Surface mount

MAX3243EAI+TG1Z 28-pin ssop 引脚配置指南

MAX3243EAI+TG1Z(28-pin ssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MAX3243EAI+TG1Z 的 28-pin ssop 封装引脚图

暂无详细引脚数据: MAX3243EAI+TG1Z.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MAX3243EAI+TG1Z 适用于 6 应用s: Industrial Serial Controllers, Data-Acquisition Equipment, Point-of-Sale Terminals, Test and Measurement Systems, Embedded Service Interfaces, Communication Port Concentrators.

🏭

Industrial Serial Controllers

The MAX3243EAI+TG1Z fits industrial serial controllers that need several RS-232 ports around a single embedded processor. Its three transmitters and five receivers provide more channel capacity than a basic one-driver, one-receiver transceiver, while the +3 V to +5.5 V supply range supports common embedded rails. Automatic shutdown and wakeup can reduce power use when the controller is idle. The enhanced ESD protection is useful near field-accessible equipment, although a properly engineered external protection and grounding strategy remains necessary.

📟

Data-Acquisition Equipment

Data-acquisition equipment can use the MAX3243EAI+TG1Z to connect a controller to multiple RS-232 instruments and status inputs. Three transmitters support separate outbound commands, while five receivers can monitor responses or external equipment conditions. Operating from +3 V to +5.5 V simplifies integration with low-voltage control electronics, and the always-active receiver supports external monitoring. Engineers should confirm data-rate and propagation-delay limits for the shortest sampling interval and include connector-level surge protection for external cabling.

🖥️

Point-of-Sale Terminals

Point-of-sale terminals can use the MAX3243EAI+TG1Z for a concentrated set of RS-232 peripheral connections. The five receivers allow several peripheral status signals to be monitored, while the three transmitters can address multiple devices or service connections. Its 28-pin SSOP package supports compact board layouts, and automatic shutdown and wakeup helps manage power when peripherals are inactive. Firmware should use deterministic timeouts and line-state checks because automatic wakeup does not replace protocol handshaking or correct RS-232 signal-state management.

🔧

Test and Measurement Systems

MAX3243EAI+TG1Z is suitable for test and measurement systems that need several RS-232 command outputs and monitoring inputs. The three transmitters can drive separate instruments, and the five receivers can collect responses, interlocks, or remote status signals without requiring one transceiver per direction. Its +3 V to +5.5 V operation is compatible with modern test-controller logic. For bench or field connections, combine the interface with appropriately rated protection, a controlled ground reference, and verified baud-rate margin for each supported instrument.

🛠️

Embedded Service Interfaces

The MAX3243EAI+TG1Z can consolidate service and diagnostic connections in an embedded controller. Multiple transmitter channels support distinct service ports, while the receiver channels can monitor external service equipment or configuration tools. Automatic shutdown and wakeup is especially useful for systems that remain powered while most communications ports are idle. Because the device shares a 28-pin SSOP footprint with close family variants, a qualified redesign can preserve PCB routing when the exact ordering suffix and temperature requirements remain compatible.

🌐

Communication Port Concentrators

MAX3243EAI+TG1Z is appropriate for communication port concentrators that aggregate legacy RS-232 links onto one embedded controller. Its three transmitters and five receivers provide enough parallel connectivity for routing, monitoring, or configuration equipment without distributing the interface across many packages. The always-active receiver enables continuous external monitoring, while automatic shutdown and wakeup supports power-conscious operation. Design the interconnect so idle RS-232 lines do not create excessive ground current, and validate every channel against the system’s selected baud rate.

推荐产品汇总

MAX3243E Family reference for the three-driver, five-receiver RS-232 interface 用于: Industrial Serial Controllers, Data-Acquisition Equipment, Point-of-Sale Terminals, Test and Measurement Systems, Embedded Service Interfaces, Communication Port Concentrators MAX3223E Related 3 V-powered RS-232 interface for lower-channel-count designs 用于: Industrial Serial Controllers, Data-Acquisition Equipment, Test and Measurement Systems, Communication Port Concentrators MAX3221E Related 3 V-powered RS-232 interface for single-port designs 用于: Industrial Serial Controllers, Point-of-Sale Terminals, Test and Measurement Systems, Embedded Service Interfaces
What is the MAX3243EAI+TG1Z?
The MAX3243EAI+TG1Z is a 3-transmitter, 5-receiver RS-232 transceiver interface IC from Analog Devices. It operates from +3 V to +5.5 V and is packaged in a 28-pin SSOP. According to the Analog Devices MAX3243E product page, the family supports EIA/TIA-232 and V.28/V.24 communications, automatic shutdown and wakeup, high-data-rate operation, and enhanced ESD protection. The device is useful where several RS-232 links must share one embedded controller or host interface.
How many RS-232 transmitters and receivers does MAX3243EAI+TG1Z have?
MAX3243EAI+TG1Z provides three RS-232 transmitters and five receivers in one 28-pin SSOP. Analog Devices describes the MAX3243 as a three-driver, five-receiver interface with one complementary always-active receiver for external monitoring. The three transmitters support multiple outbound serial links, while the larger receiver count supports several inbound links or monitoring points. Confirm the final channel assignments against the manufacturer pin-description table when laying out the PCB.
What supply voltage does MAX3243EAI+TG1Z require?
MAX3243EAI+TG1Z operates from a +3 V to +5.5 V supply. The Analog Devices MAX3243E product page identifies the family as a 3 V-powered EIA/TIA-232 and V.28/V.24 communications interface, while the product listing identifies a 1 A supply-current rating. This voltage range allows use with common 3.3 V and 5 V embedded systems, although logic-level compatibility and decoupling requirements should be checked against the datasheet.
Where can I download the MAX3243EAI+TG1Z datasheet?
The official MAX3243E datasheet and product information is available from Analog Devices at https://www.analog.com/en/products/max3243e.html. The manufacturer page provides family specifications and links to the device documentation. MAX3243EAI+TG1Z is the 28-pin SSOP ordering variant with the TG1Z suffix. Use the manufacturer’s pin-description and ordering tables to confirm signal names, package dimensions, temperature limits, and ordering information.
Where can I find the MAX3243EAI+TG1Z pinout?
The MAX3243EAI+TG1Z pinout is published in the Analog Devices MAX3243E family documentation on the official product page. Because this ordering code specifies a 28-pin SSOP, use the pin-description table associated with the 28-pin package rather than a pin diagram from the smaller MAX3221E or MAX3223E devices. Assign PCB nets only after checking package pin numbering, exposed connections, supply pins, ground pins, and every receiver or transmitter signal.
What can replace MAX3243EAI+TG1Z?
The closest drop-in choices identified for MAX3243EAI+TG1Z are MAX3243EAI+, MAX3243EAI+G1Z, MAX3243EEUI+T, and MAX3243EEAI+TG1Z, subject to checking the manufacturer ordering table for temperature grade and package details. The family members use the same 28-pin SSOP interface concept, but the exact suffix determines ordering form and temperature qualification. Confirm pin functions, supply limits, and the required production variant before substitution.
Is MAX3243EAI+TG1Z compatible with MAX3243EEUI+T?
MAX3243EEUI+T is a pin-compatible family candidate for MAX3243EAI+TG1Z because both belong to the MAX3243E interface family and use the 28-pin SSOP format. They are not necessarily interchangeable without checking the suffix-specific temperature grade, lead style, and ordering information. Use the Analog Devices MAX3243E ordering table to confirm that the selected grade and package satisfy the equipment’s environmental requirements before treating it as a drop-in replacement.
When should I choose MAX3243EAI+TG1Z over another MAX3243E variant?
Choose MAX3243EAI+TG1Z when the design requires the 28-pin SSOP MAX3243E arrangement, a 3 V to 5.5 V supply, three transmitters, and five receivers. Select another suffix only when its temperature grade, packaging form, or ordering configuration is required by the system. The practical advantage of the target is consolidated channel count: it reduces the number of separate RS-232 interface ICs and associated routing needed for multi-port equipment.
What is the difference between MAX3243EAI+ and MAX3243EAI+TG1Z?
MAX3243EAI+ and MAX3243EAI+TG1Z belong to the same MAX3243E 28-pin SSOP interface family and share the three-transmitter, five-receiver architecture. Their suffix and ordering representation differ, so procurement documentation should identify the exact required orderable part rather than treating the base and full suffix as identical strings. The Analog Devices ordering table is the controlling reference for package form, temperature grade, and approved order codes.
Is MAX3243EAI+TG1Z suitable for industrial RS-232 equipment?
MAX3243EAI+TG1Z is functionally suitable for multi-channel RS-232 equipment because it supports +3 V to +5.5 V operation, automatic shutdown and wakeup, and enhanced ESD protection. Industrial suitability also depends on the suffix-specific temperature rating, system isolation strategy, connector protection, and environmental qualification. Verify those items in the MAX3243E datasheet and use an appropriately rated external protection network where the port connects to field-accessible cabling.
What are the key specifications of MAX3243EAI+TG1Z that engineers should know?
The key MAX3243EAI+TG1Z specifications are three RS-232 transmitters, five receivers, a +3 V to +5.5 V operating supply, a 1 A supply-current rating, and a 28-pin SSOP package. According to Analog Devices, the family also provides EIA/TIA-232 and V.28/V.24 support, automatic shutdown and wakeup, high-data-rate operation, and enhanced ESD protection. Exact speed and temperature limits remain tied to the datasheet and ordering suffix.
How does automatic shutdown and wakeup help MAX3243EAI+TG1Z designs?
Automatic shutdown and wakeup let the MAX3243EAI+TG1Z manage power when an attached RS-232 peer is inactive. The Analog Devices MAX3243E family supports these functions as a system-level power-control feature, which can reduce consumption during idle periods and simplify peripheral handling. The host should still account for startup timing and the external data-line behavior when designing firmware, because automatic wakeup does not replace correct serial framing or application-level handshaking.
What is the best Analog Devices equivalent for MAX3243EAI+TG1Z?
MAX3243EEAI+TG1Z is the closest identified Analog Devices ordering equivalent to MAX3243EAI+TG1Z because it uses the same 28-pin SSOP MAX3243E family format. MAX3243EAI+ and MAX3243EAI+G1Z are additional ordering candidates, while MAX3243EEUI+T is another family member. The suffix determines the final ordering configuration, so use the manufacturer’s package and temperature tables to confirm exact production suitability rather than relying only on the base family name.
Where can I buy MAX3243EAI+TG1Z and check its lead time?
Use the Request a Quote form on this XAIPART product page to ask for MAX3243EAI+TG1Z pricing, stock status, minimum order quantity, and current lead time. The exact suffix should be entered in the request so the orderable 28-pin SSOP configuration is clear. Avoid treating generic MAX3243 or MAX3243E family pricing as a substitute for a quote tied to the complete MAX3243EAI+TG1Z order code.
Does MAX3243EAI+TG1Z support 3.3 V systems?
MAX3243EAI+TG1Z supports a +3 V to +5.5 V operating range, so it is compatible with 3.3 V systems when the remaining interface conditions are met. The Analog Devices family page identifies the MAX3243E as a 3 V-powered RS-232 communications interface. Confirm the exact supply current, logic thresholds, data rate, and bypass requirements for the intended operating point in the manufacturer datasheet before finalizing the power architecture.

工程参考数据: MAX3243EAI+TG1Z ——对比、设计指导和合规信息。

选型指南

Choose MAX3243EAI+TG1Z when the design needs three RS-232 transmitters, five receivers, a 28-pin SSOP footprint, and operation from +3 V to +5.5 V. It is particularly useful in industrial controllers, data-acquisition systems, test equipment, and embedded service interfaces where several links are consolidated around one host. MAX3243EEAI+TG1Z is the closest ordering alternative and should be selected when its suffix-specific grade better matches production requirements. MAX3243EAI+ and MAX3243EAI+G1Z are also family candidates, but their order codes must be checked against the manufacturer ordering table. MAX3243EEUI+T can fit the same 28-pin SSOP family, although its suffix-specific environmental rating must be confirmed. Use MAX3221E or MAX3223E for genuinely lower-channel-count designs rather than forcing those different pinouts into a MAX3243E layout.

与替代料对比

参数 本产品 MAX3243EEAI+TG1Z MAX3243EAI+ MAX3243EAI+G1Z MAX3243EEUI+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Transmitter Count 3 3 3 3 3
Receiver Count 5 5 5 5 5
Supply Voltage Range +3 V to +5.5 V +3 V to +5.5 V +3 V to +5.5 V +3 V to +5.5 V +3 V to +5.5 V
Automatic Shutdown and Wakeup Supported Supported Supported Supported Supported
ESD Protection Enhanced Enhanced Enhanced Enhanced Enhanced

关键差异点

  • Three transmitters and five receivers in one interface (对比 MAX3221E)
  • Consolidates multiple monitoring inputs (对比 MAX3223E)
  • Automatic shutdown and wakeup support (对比 MAX3243EEAI+TG1Z)

设计说明

Place the interface-supply bypass capacitor immediately between the MAX3243EAI+TG1Z supply and ground pins. Keep the loop formed by the capacitor, device, and ground return as short as practical. Route RS-232 driver outputs directly toward the connector or protection network, and avoid sharing narrow high-current paths with sensitive analog or digital signals. This separation helps prevent supply transients and return currents from coupling into nearby logic.

Do not substitute a MAX3221E or MAX3223E pinout for the MAX3243EAI+TG1Z without a complete footprint and function review; those family members have different channel counts and may use different packages. Likewise, confirm that the exact TG1Z ordering variant satisfies the required temperature grade. After installation, verify transmitter polarity, receiver input assignments, shutdown behavior, and every supply pin against the manufacturer’s 28-pin SSOP pin-description table.

Keep the RS-232 connector, external protection components, and transceiver on a controlled signal path, with a low-impedance ground reference between the interface circuit and connector shell. Where the port connects to external cabling, use protection components selected for the required surge and ESD environment. Treat enhanced on-chip ESD protection as one layer of the solution rather than a substitute for correctly rated external protection, chassis grounding, and cable routing.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The MAX3243EAI+TG1Z is a commercial RS-232 interface IC, so AEC-Q100 qualification is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or the applicable compliance documentation.

数据核验日期: 2026-11-09 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MAX3243EAI+TG1Z datasheet MAX3243EAI+TG1Z pinout MAX3243EAI+TG1Z datasheet pdf MAX3243EAI+TG1Z specifications MAX3243EAI+TG1Z equivalent MAX3243EAI+TG1Z replacement MAX3243EAI+TG1Z cross reference MAX3243EAI+TG1Z footprint Analog Devices MAX3243EAI+TG1Z MAX3243EAI+TG1Z price MAX3243EAI+TG1Z stock MAX3243EAI+TG1Z vs MAX3243EEAI+TG1Z 28-pin SSOP RS-232 transceiver MAX3243EAI+TG1Z industrial controller

相关元器件 & 术语

Analog Devices MAX3243EAI+TG1Z MAX3243E MAX3243EEAI+TG1Z MAX3243EAI+ MAX3243EAI+G1Z MAX3243EEUI+T MAX3221E MAX3223E RS-232 transceiver interface IC RS-232 EIA/TIA-232 V.28 V.24 transmitter receiver automatic shutdown automatic wakeup enhanced ESD protection 28-pin SSOP surface-mount package industrial control data acquisition test and measurement
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情