MAX3243EUI+T - 3/5 RS-232 Transceiver, 250kbps | Maxim
料号: MAX3243EUI+T ✓ 量产中MAX3243EUI+T 概述
An RS-232 transceiver is an interface IC that translates between logic-level signals and the bipolar voltage levels used by RS-232 links. The MAX3243 belongs to the RS-232 transceiver class within interface ICs, where it combines drivers, receivers, an on-board charge pump, and low-power shutdown control. This integration reduces the number of external components required for portable equipment, industrial controllers, and computer peripherals.
Key features include three RS-232 drivers, five RS-232 receivers, full-duplex operation, a 3 V to 5.5 V supply range, operation at up to 250 kbps, and ±15 kV ESD protection. AutoShutdown is particularly useful in battery-powered equipment because the device can reduce supply consumption when no valid receiver signal is present. A complementary always-active receiver supports continuous monitoring in designs that cannot tolerate shutdown of every receiver path.
The MAX3243 family combines an on-board power supply with RS-232 line-driver and receiver functions. Maxim's AutoShutdown circuitry detects whether a valid signal is present on the receiver inputs and shuts down the onboard supply and drivers when appropriate. The MAX3243EUI+T therefore supports both energy-efficient intermittent communication and always-active monitoring within one interface device.
Typical uses include battery-powered instruments, point-of-sale equipment, industrial data-acquisition systems, printers, portable computers, and external communications equipment. Its 28-pin TSSOP package is appropriate for compact industrial and embedded assemblies where three RS-232 outputs and five inputs are required. The interface is especially useful when a system must monitor several incoming lines while retaining the option to place unused drivers into a low-power state.
When designing around the MAX3243EUI+T, place the charge-pump capacitor and receiver and driver interface components according to the manufacturer's recommended layout. Confirm that every connected RS-232 line is protected against electrostatic discharge and that the selected cable does not exceed the voltage and grounding requirements of the RS-232 interface. Firmware should also account for AutoShutdown behavior when a remote system may disconnect without first sending a valid signal.
This product record combines the manufacturer specifications with package, application, comparison, and design guidance. It also separates exact catalog facts from electrical details that still require confirmation in the current Analog Devices or Maxim Integrated datasheet, helping engineers evaluate the MAX3243EUI+T for new RS-232 designs without confusing it with the faster MAX3243E or lower-speed MAX3243C variants.
直接替换替代料: MAX3243EUI+T ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX3243EUI+T (相同外形与封装尺寸) ——差异在于 Driver Count, Package, Product Type, Receiver Count.
该产品暂无直接替换替代料。
请求替代料MAX3243EUI+T 规格参数
| Product Type | 3-driver/5-receiver full-duplex RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Driver Count | 3 drivers |
| Receiver Count | 5 receivers |
| ESD Protection | ±15 kV |
| AutoShutdown Supply Current | 1 µA |
| 封装 | 28-pin TSSOP |
| 安装类型 | Surface mount |
| Operating Voltage | 3 V to 5.5 V |
| Interface Standard | RS-232 |
| Duplex Mode | Full duplex |
| Low-Power Feature | AutoShutdown |
| Always-Active Monitoring | Complementary always-active receiver |
| 引脚数 | 28 pins |
| ESD Standard Qualification | ±15 kV IEC ESD protection |
| RoHS 状态 | unknown |
| REACH Status | unknown |
MAX3243EUI+T 28-pin tssop 引脚配置指南
MAX3243EUI+T(28-pin tssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX3243EUI+T.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX3243EUI+T 适用于 6 应用s: Battery-Powered Portable Instruments, Industrial Data-Acquisition Equipment, Point-of-Sale Terminal Peripherals, Printer and Legacy Peripheral Interfaces, Embedded Serial Communication Controllers, Telecommunications and Network Equipment.
Battery-Powered Portable Instruments
The MAX3243EUI+T fits portable instruments that exchange serial data through an RS-232 port while operating from a 3 V to 5.5 V battery-regulated rail. Its 250 kbps capability supports moderate-speed links, while AutoShutdown reduces supply current to 1 µA when the receiver inputs do not detect a valid signal. This is valuable for handheld test equipment and portable analyzers that spend substantial time idle. The design should account for wake-up timing and ensure that the system keeps enough state to recognize a returning remote device. The 28-pin TSSOP package also preserves board area compared with discrete driver, receiver, and charge-pump implementations.
推荐
Industrial Data-Acquisition Equipment
The MAX3243EUI+T is suitable for industrial data-acquisition units that need several incoming RS-232 signals but only three outgoing channels. Its five receivers allow controller status, alarm, and measurement-interface lines to be monitored simultaneously, while the complementary always-active receiver supports monitoring when the main AutoShutdown function is active. A maximum rate of 250 kbps is adequate for many legacy instrument-control protocols and short equipment links. Industrial implementations should still include robust grounding, cable transient protection, and verified logic thresholds because the ±15 kV ESD rating does not replace correct enclosure and cable design.
推荐
Point-of-Sale Terminal Peripherals
The MAX3243EUI+T can connect a point-of-sale controller or peripheral to legacy RS-232 equipment that requires multiple status inputs. Three driver outputs suit command or control channels, and five receivers can consolidate acknowledgement, readiness, and alarm signals into one interface IC. Operating from 3 V to 5.5 V supports modern mixed-voltage logic systems, and AutoShutdown reduces power when the peripheral is disconnected. For reliable deployment, the firmware should treat receiver state as potentially invalid during wake-up and should avoid assuming that a disconnected cable always presents a defined logic level.
推荐
Printer and Legacy Peripheral Interfaces
The MAX3243EUI+T is well suited to printer and legacy peripheral interfaces that combine bidirectional communication with additional status lines. The three-driver/5-receiver arrangement permits transmit, receive, paper-ready, fault, and busy signals to share one 28-pin TSSOP device. Its 250 kbps maximum rate is appropriate for many peripheral protocols that operate below that limit. The AutoShutdown function lowers consumption when a disconnected or inactive peripheral is detected, but the host software should include timeouts because line activity may not resume instantly. PCB layout should follow the manufacturer's recommended charge-pump and bypass-capacitor arrangement to minimize switching transients at the interface pins.
推荐
Embedded Serial Communication Controllers
The MAX3243EUI+T provides a practical RS-232 front end for embedded controllers whose UART operates at 3.3 V or 5 V. The interface accepts low-voltage logic and performs the level translation, charge-pump generation, and signal conditioning required by RS-232. With a 250 kbps ceiling and three drivers, it supports legacy control and diagnostic links without relying on an external RS-232 line-driver assembly. The always-active receiver path is valuable when an embedded system must detect an incoming condition even while other channels are shut down. Firmware should validate cable state and use deterministic timeouts around AutoShutdown wake-up behavior.
推荐
Telecommunications and Network Equipment
The MAX3243EUI+T can serve as a management or diagnostic interface in telecommunications and network equipment that retains RS-232 connectors for installation or service access. Three driver outputs and five receiver inputs support command, response, and hardware-status lines, while operation from 3 V to 5.5 V accommodates modern system rails. The 250 kbps limit is generally suitable for administrative terminal interfaces, whereas high-throughput traffic should use a faster standard. Equipment exposed to service ports should use controlled cable lengths, defined signal grounds, and appropriate surge protection in addition to the internal ±15 kV ESD capability.
推荐
推荐产品汇总
工程参考数据: MAX3243EUI+T ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 28-pin TSSOP |
| Brand | Maxim Integrated |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Driver Count | 3 drivers |
| Receiver Count | 5 receivers |
| ESD Protection | ±15 kV |
| AutoShutdown Supply Current | 1 µA |
| Duplex Mode | Full duplex |
| Low-Power Feature | AutoShutdown |
关键差异点
- Provides the required 250 kbps operating rate (对比 MAX3243CUI+T)
- Avoids the faster-family functional mismatch (对比 MAX3243EEUI+T)
- Combines three drivers, five receivers, and low-power shutdown (对比 MAX3232ECDR)
设计说明
Route the MAX3243EUI+T charge-pump capacitor and bypass capacitors exactly as shown in the manufacturer's recommended layout, keeping the charge-pump loop compact. Place input and output interface paths away from clocks, switching regulators, and fast digital edges. Because the device is a 28-pin TSSOP, inspect the pad geometry and exposed thermal behavior against the final board assembly rather than relying only on nominal package dimensions.
Decouple the 3 V to 5.5 V supply close to the device and account for the charge-pump current when sizing the regulator and trace widths. The AutoShutdown function can reduce the transceiver's inactive supply current to 1 µA, but wake-up behavior and external circuitry determine the complete system quiescent current. Measure both shutdown and active current in the finished design instead of estimating from the transceiver specification alone.
Treat the RS-232 signal ground as part of the interface and connect it according to the equipment architecture rather than through long chassis paths. Maintain the recommended transceiver supply and bypass arrangement to minimize charge-pump noise at logic pins. The ±15 kV ESD rating improves robustness, but it does not protect against every industrial surge condition; external protection may still be required based on the installation environment.
Do not substitute MAX3243EEUI+T or MAX3243CUI+T solely because they use the same 28-pin TSSOP family. MAX3243EEUI+T is associated with the 500 kbps MAX3243E family, and MAX3243CUI+T is listed at 120 kbps, while the target MAX3243EUI+T supports up to 250 kbps. Also account for AutoShutdown in software by using timeouts and explicit line-state checks rather than treating a disconnected receiver as a valid communication session.
合规信息
The MAX3243 product documentation identifies ±15 kV IEC ESD protection, but RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer product documentation or the project compliance system.