Analog Devices

MAX378CWG+ - 8:1 High-Voltage Fault-Protected MUX | Analog Devices

料号: MAX378CWG+ ✓ 量产中
5 V to 36 V Vdss A few nanoamperes per manufacturer product description Id 3.5 kOhm Rds(on) 24-pin SOIC Package
最小起订量: 1 |

MAX378CWG+ 概述

Analog Devices MAX378CWG+ is a single-ended, 8-channel, 1-of-8 analog multiplexer with a maximum on-resistance of 3.5 kOhm, switching times of 1 us on and 300 ns off, and operation from a single 5 V to 36 V supply or dual ±18 V supplies. It is packaged in a 24-pin SOIC. The device uses a series N-channel/P-channel/N-channel structure to provide fault protection when input voltages remain applied after the supplies are removed.

An analog multiplexer is an analog switch that connects one of several inputs to a common output or selects one signal path from multiple candidates. The MAX378 belongs to the analog switch and multiplexer hierarchy, where the 8:1 configuration provides eight single-ended inputs and one output. This makes the device useful for compact signal-routing systems in test equipment, industrial control, instrumentation, and data-acquisition equipment where one source must be selected from several measured or sensed signals.

Key features include a maximum on-resistance of 3.5 kOhm, 1 us maximum turn-on time, and 300 ns maximum turn-off time. The fault-protected architecture is especially important in high-voltage systems because the internal transistor arrangement turns the channels off if the supply rails collapse while external input signals are still present. The single 5 V to 36 V or dual ±18 V supply choices support both conventional and bipolar analog systems. The 24-pin SOIC package also provides a surface-mount implementation for industrial and instrumentation equipment.

The MAX378 uses a series N-channel, P-channel, and N-channel switch structure. Its digital address and enable controls route the selected analog input to the common output while isolating other channels. The 3.5 kOhm maximum on-resistance is appropriate for medium-impedance measurement paths, control signals, and test points where lower resistance is not essential. Designers should account for this resistance in the source impedance, settling time, and signal-accuracy calculations of the complete measurement chain.

Typical applications include automated test systems, battery and power-system monitoring, industrial process control, programmable instrumentation, and multichannel sensor acquisition. In each case, the multiplexer reduces the number of input channels required by the host analog-to-digital converter or measurement circuit. The common MAX378 family also includes the MAX379 differential multiplexer for applications requiring paired signal selection rather than a single-ended 8:1 arrangement.

For reliable operation, treat the maximum 36 V single-supply or ±18 V dual-supply limits as absolute constraints. Keep signal paths short, provide a stable low-impedance supply reference, and use suitable protection networks when external inputs can exceed the selected supply range. Verify address transitions, disable timing, settling behavior, and channel isolation in the final analog signal path.

This page combines the manufacturer product information with practical routing, protection, timing, and layout considerations. It also organizes the available drop-in information by package and electrical match so engineers can assess replacement decisions without confusing a pin-compatible part with merely similar multiplexer functionality.

直接替换替代料: MAX378CWG+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MAX378CWG

✅ 直接替换
📦 24-pin SOIC
Maximum on-resistance is 3.5 kOhm on both parts, while turn-on and turn-off times are 1 us and 300 ns respectively; verify suffix-specific ordering and temperature details

📋 参考替代料(不在目录中)

MAX378CWG+T

✅ 直接替换
📦 24-pin SOIC
Electrical timing and 3.5 kOhm maximum on-resistance match, while the +T designation identifies the manufacturer tape-and-reel shipping form

📋 参考替代料(不在目录中)

MAX378CWG+ 规格参数

Multiplexer Configuration 8:1 single-ended, 1-of-8
Number of Channels 8 channels
Maximum On-Resistance 3.5 kOhm
Maximum Turn-On Time 1 us
Maximum Turn-Off Time 300 ns
Single-Supply Voltage Range 5 V to 36 V
Dual-Supply Voltage Range +/-18 V
Fault Protection Series N-channel/P-channel/N-channel structure
Powered-Off Fault Current A few nanoamperes per manufacturer product description
封装 24-pin SOIC
安装类型 Surface Mount
工作温度范围 0 C to +70 C
Production Status Production

MAX378CWG+ 24-pin soic 引脚配置指南

MAX378CWG+(24-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MAX378CWG+ 的 24-pin soic 封装引脚图

暂无详细引脚数据: MAX378CWG+.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MAX378CWG+ 适用于 6 应用s: Battery Cell Monitoring, Automated Test Equipment, Industrial Process Control, Programmable Instrumentation, Data Acquisition Systems, High-Voltage Signal Routing.

⚡

Battery Cell Monitoring

The MAX378CWG+ is appropriate for multi-cell battery monitoring because one 8:1 multiplexer can connect eight single-ended cell-sense inputs to a common measurement channel. Its maximum on-resistance of 3.5 kOhm is suitable when the ADC input presents a sufficiently high impedance and the cell-sensing network has a much lower source impedance. The manufacturer’s fault-protected N-channel/P-channel/N-channel structure is valuable if a measurement rail is disabled while external cell voltages remain present. Designers must add cell-level filtering, input protection, and balancing functions outside the multiplexer and confirm that every selected voltage remains within the device’s absolute-maximum limits.

🔧

Automated Test Equipment

The MAX378CWG+ can route eight single-ended test points to a shared measurement front end in automated test equipment. Its 1 us maximum turn-on time and 300 ns maximum turn-off time support controlled address selection, while the 3.5 kOhm maximum on-resistance should be included in test-path error budgets. The 24-pin SOIC package supports compact surface-mount instrument boards. For high-accuracy measurements, use low-capacitance routing, a suitable settling period after switching, and an ADC whose input impedance does not create unacceptable divider error with the switch resistance.

🏭

Industrial Process Control

The MAX378CWG+ fits industrial process-control boards that must sample several analog sensor outputs or control voltages through one shared controller input. Eight single-ended channels reduce front-end wiring and converter count, while fault protection helps manage accidental supply-sequence conditions. The 0 C to +70 C operating range identified in the MAX378 family comparison should be checked against the enclosure’s temperature range. For noisy factory environments, place filtering close to the source, maintain a low-impedance ground reference, and keep the multiplexed trace away from switching power nodes and motor-control traces.

🖥️

Programmable Instrumentation

The MAX378CWG+ enables a programmable instrument to select among eight external analog inputs without allocating a separate front-end channel to each source. Its 8:1 configuration is useful for source selection, calibration-node routing, and programmable divider networks. With a maximum on-resistance of 3.5 kOhm, the device is most appropriate for medium-impedance sources rather than precision low-level bridges. Account for resistance-induced gain error, input leakage, and finite settling time when calculating measurement uncertainty. Follow the manufacturer pin table closely because control inputs, supplies, and analog paths must match the selected board revision.

📡

Data Acquisition Systems

The MAX378CWG+ can expand a compact data-acquisition system by routing eight single-ended sensor outputs into one common analog input. This architecture lowers the number of ADC channels required when samples can be selected sequentially. The manufacturer’s 5 V to 36 V single-supply or ±18 V dual-supply flexibility allows integration into different analog power architectures. Engineering trade-offs include the 3.5 kOhm maximum on-resistance, 1 us turn-on time, and 300 ns turn-off time. Use matched acquisition timing, calibrated channel offsets, and software that discards samples until the complete mux and ADC settling interval has elapsed.

🔋

High-Voltage Signal Routing

The MAX378CWG+ is suited to high-voltage signal-routing stages where input signals may remain present while the multiplexer supply is off. Its series N-channel/P-channel/N-channel structure turns the channels off under that condition and limits residual current to a few nanoamperes according to the manufacturer description. The 36 V maximum single supply supports higher-voltage instrumentation than conventional low-voltage analog switches. Protection above the device ratings is still required, including clamps, series impedance, and energy limiting, because internal fault protection does not authorize signals beyond the published absolute-maximum ratings.

What is the MAX378CWG+?
The MAX378CWG+ is an 8-channel, single-ended 1-of-8 analog multiplexer with fault protection. According to the Analog Devices MAX378 product page, it uses a series N-channel/P-channel/N-channel structure, has a maximum on-resistance of 3.5 kOhm, and comes in a 24-pin SOIC package. It selects one of eight analog inputs for connection to a common output.
What is the operating voltage of MAX378CWG+?
The MAX378CWG+ supports either a single 5 V to 36 V supply or dual supplies of ±18 V. The MAX378 comparison information identifies a maximum dual-supply magnitude of 18 V per rail. Use the single-supply arrangement when the signal path is referenced to ground, and use dual supplies when bipolar signals must be routed.
How fast is the MAX378CWG+ analog switch?
The MAX378CWG+ has a maximum turn-on time of 1 us and a maximum turn-off time of 300 ns. These switching specifications describe the device-level timing shown in the MAX378 family comparison. Actual measurement settling can be longer because it also depends on the source impedance, capacitance at the mux output, address timing, and the acquisition system connected to the common output.
What fault protection does the MAX378CWG+ provide?
The MAX378CWG+ uses a series N-channel/P-channel/N-channel structure to limit unintended current when external input voltages remain applied after the device supplies turn off. According to the Analog Devices MAX378 product description, all channels are turned off in that condition and only a few nanoamperes of leakage remain. This protection is valuable in high-voltage instrumentation systems.
Where can I download the MAX378CWG+ datasheet?
The MAX378CWG+ datasheet and product resources are available from the official Analog Devices MAX378 product page at https://www.analog.com/en/products/max378.html. The page provides the MAX378 data sheet and product-selection information. Use the manufacturer document to verify pin assignments, absolute maximum ratings, recommended operating conditions, and timing values before layout release.
Where can I find the MAX378CWG+ pinout?
The MAX378CWG+ pinout is shown in the manufacturer MAX378 data sheet linked from the official Analog Devices product page. The component uses a 24-pin SOIC package. Assign PCB tracks from the datasheet pin-description and package-drawing tables, including the address inputs, enable control, supply pins, analog input pins, and common output.
Is MAX378CWG+ suitable for battery testing?
Yes, the MAX378CWG+ is suitable for multi-cell battery monitoring when individual cell voltages remain within the permitted input and supply limits. Its 8:1 configuration reduces the number of measurement inputs required by the host ADC, while the fault-protected structure helps isolate the mux when a supply rail is absent. Cell balancing and high-current protection circuitry must be designed separately.
Can MAX378CWG+ replace MAX378CWG?
The MAX378CWG and MAX378CWG+ denote closely related ordering variants of the MAX378 family in the 24-pin SOIC configuration, but engineers should verify the exact suffix, temperature grade, and shipping form in the manufacturer ordering information. The MAX378CWG+ is the production part identified by the official MAX378 product page. Confirm the completed part number before substituting inventory.
What is the best drop-in replacement for MAX378CWG+?
The closest documented same-brand replacement is MAX378CWG in the same 24-pin SOIC family, with the same 3.5 kOhm maximum on-resistance and 1 us/300 ns switching timing shown in the comparison information. A broader five-part drop-in set could not be verified from the available cross-reference information. Validate the complete ordering code, control logic, and absolute-maximum ratings before substitution.
Is MAX378CWG+ the same as MAX379?
No. The MAX378CWG+ is an 8-channel single-ended 1-of-8 multiplexer, while the MAX379 is a 4-channel differential 2-of-8 multiplexer. According to the Analog Devices MAX378 product description, the devices serve different signal architectures even though both provide high-voltage, fault-protected multiplexing. The MAX379 also uses a different package and cannot be assumed to be pin-compatible.
When should I choose MAX378CWG+ over a lower-resistance analog switch?
Choose the MAX378CWG+ when eight high-voltage, single-ended inputs must be routed through one common path and its 3.5 kOhm maximum on-resistance is acceptable. Use a lower-resistance switch when driving a high-impedance amplifier, sampling very small sensor voltages, or minimizing gain error is more important than high-voltage fault tolerance and input count.
What should I check before replacing MAX378CWG+ with another mux?
Check the footprint, pin assignments, supply range, analog input range, control thresholds, on-resistance, switching times, leakage, and fault behavior before selecting a replacement. A 24-pin SOIC body alone does not establish drop-in compatibility. Compare the candidate against the MAX378 manufacturer datasheet and verify it with the source impedance, load capacitance, and supply sequencing of the target circuit.
Is MAX378CWG+ in stock and what is its lead time?
Current stock and lead time for MAX378CWG+ change with inventory and should be confirmed through the Request a Quote form on this page. The manufacturer identifies the MAX378 family as production, while distributor inventory can vary by exact suffix and shipping form. Submit the required quantity, target package, and delivery location with the quote request.
What is the price of MAX378CWG+?
Use the Request a Quote form on this page for a current price and quantity availability for MAX378CWG+. Pricing depends on order quantity, exact suffix, shipping form, and current inventory. The page separates structured price evidence from the active quotation workflow so that a historical unit price is not mistaken for a current offer.
Where can I buy MAX378CWG+ online?
Submit a Request a Quote through the form on this page to source MAX378CWG+ and confirm current availability, lead time, and order quantity. The exact MAX378CWG+ ordering code must be stated on the request. This avoids accidentally quoting MAX378CWG, MAX378CWG+T, MAX378CPE+, or the electrically different MAX379 family.
What are the key specifications engineers should know about MAX378CWG+?
The MAX378CWG+ is an 8:1 single-ended multiplexer with a 3.5 kOhm maximum on-resistance, 1 us maximum turn-on time, 300 ns maximum turn-off time, and 24-pin SOIC package. It supports a 5 V to 36 V single supply or ±18 V dual supplies. Its defining feature is series N-channel/P-channel/N-channel fault protection for systems where inputs can remain energized after supply shutdown.

工程参考数据: MAX378CWG+ ——对比、设计指导和合规信息。

选型指南

Choose the MAX378CWG+ when the design must select one of eight single-ended analog signals, the source impedance tolerates a maximum 3.5 kOhm on-resistance, and fault isolation is important when external signals can remain energized during supply shutdown. MAX378CWG is the close non-plus ordering variant for the same 24-pin SOIC electrical family, while MAX378CWG+T is the documented tape-and-reel shipping form. Neither should replace the target without checking the exact ordering suffix and production status. Do not choose the MAX379 as a drop-in substitute: it is a differential 4-channel multiplexer in a different package. Consider a lower-resistance, faster switch instead when precision low-level measurement dominates and the MAX378CWG+ voltage range or fault behavior is unnecessary.

与替代料对比

参数 本产品 MAX378CWG MAX378CWG+T
Package 24-pin SOIC 24-pin SOIC 24-pin SOIC
Brand Analog Devices Analog Devices Analog Devices
Multiplexer Configuration 8:1 single-ended, 1-of-8 8:1 single-ended, 1-of-8 8:1 single-ended, 1-of-8
Maximum On-Resistance 3.5 kOhm 3.5 kOhm 3.5 kOhm
Maximum Turn-On Time 1 us 1 us 1 us
Maximum Turn-Off Time 300 ns 300 ns 300 ns
Maximum Dual-Supply Voltage +/-18 V +/-18 V +/-18 V
Operating Temperature Range 0 C to +70 C 0 C to +70 C 0 C to +70 C
Fault Protection Series N-channel/P-channel/N-channel structure Series N-channel/P-channel/N-channel structure Series N-channel/P-channel/N-channel structure

关键差异点

  • Provides eight single-ended inputs in one 24-pin SOIC multiplexer (对比 MAX379)
  • Maintains fault isolation in powered-down signal paths (对比 Conventional low-voltage analog switches)
  • Supports broad single-supply operation (对比 5 V-only analog switches)

设计说明

Include the 3.5 kOhm maximum on-resistance when calculating channel gain error. With a source impedance of Rs, the switch creates a divider; for example, a 10 kOhm source and an ADC input much greater than 3.5 kOhm would produce approximately 9.2% gain loss before accounting for ADC loading. Use a lower source impedance or correct the gain in calibration when the measurement accuracy cannot tolerate that error.

Design the supply rails so normal input voltages never exceed the MAX378CWG+ absolute-maximum limits. The device can be operated from 5 V to 36 V or from ±18 V dual supplies, but fault protection is not permission to apply arbitrary overvoltage. Add external clamps, current limiting, and controlled source impedance for external nodes that can be driven above or below the local rails.

Route the eight analog inputs and the common output as short, guarded traces, and connect the device ground pins using a low-impedance plane. Keep mux output routing away from switching power converters, relays, and high-current motor nodes. If the source impedance is high, add guarded input traces or differential pairings where the circuit topology allows, because leakage and capacitive coupling can undermine the benefit of eight-channel multiplexing.

Do not assume the 1 us turn-on time is the complete acquisition settling time. The total interval also includes address-control propagation, switch settling, output RC charging, and ADC acquisition and conversion. In firmware, select the channel, wait through the complete worst-case settling interval, and then sample. This prevents transient charge from a previous channel from appearing as a measurement error.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The product-comparison material lists RoHS details, but the compliance result is not stated. Verify all declarations against the current manufacturer product page or declaration documents before release.

相关搜索

MAX378CWG+ datasheet MAX378CWG+ datasheet pdf MAX378CWG+ pinout MAX378CWG+ equivalent MAX378CWG+ replacement MAX378CWG+ cross reference MAX378CWG+ 24-SOIC MAX378CWG+ price MAX378CWG+ stock Analog Devices MAX378CWG+ MAX378CWG+ 8:1 multiplexer MAX378CWG+ 36V switch MAX378CWG+ high voltage application MAX378CWG+ vs MAX379

相关元器件 & 术语

Analog Devices MAX378CWG+ MAX378CWG MAX378CWG+T MAX379 MAX378 analog multiplexer analog switch multiplexer switch IC 1-of-8 multiplexer single-ended multiplexer differential multiplexer fault-protected multiplexer N-channel/P-channel/N-channel structure on-resistance turn-on time turn-off time common output 24-pin SOIC SOIC package family surface mount industrial instrumentation battery cell monitoring data acquisition high-voltage signal routing
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情