onsemi

MC14510BF - BCD Up/Down Counter | onsemi | Logic IC

料号: MC14510BF ✗ 停产
Flat package Package
最小起订量: 1 |

MC14510BF 概述

The onsemi MC14510BF is a BCD up/down counter integrated circuit, also categorized as a counter and divider, and is offered in a flat-package configuration. Its core function is to count upward or downward through a decade and preserve the count in BCD format, making it suitable for sequencing, timing, and event-counting systems that require decimal-compatible logic rather than ordinary binary counting. The MC14510BF belongs to the broader 4000-series CMOS logic family, where counter ICs operate as state-management building blocks inside larger digital control systems.

A BCD up/down counter is a specialized type of counter IC that advances or reverses through ten states from zero through nine. This decimal-oriented behavior can simplify the interface between digital logic and ten-position displays because each decade is represented by four BCD output bits. The counter can therefore support decade-stepping, programmable timing, and sequential control functions. By contrast, a conventional binary counter advances through 16 states per four output bits, which may require additional conversion when a decimal display or decade-oriented mechanism is involved.

The MC14510BF uses four parallel BCD outputs to represent the current count. Typical system use requires a clock source, control logic for count direction, reset or initialization handling, and suitable decoupling close to the power terminals. Because the part belongs to the MC14510B family, designers should consult the family datasheet for the exact electrical limits, truth table, propagation timing, supply-voltage range, and pin assignments before finalizing a PCB.

MC14510BF is suitable for industrial sequencing equipment, laboratory timers, digital panel meters, test fixtures, event counters, and embedded control subsystems. In a timer or sequencer, the up/down capability allows the same counter to advance through timing intervals or reverse when a control event requests a return to the starting state. In an instrument, the BCD outputs can feed display-driver circuitry without requiring the system controller to perform repeated binary-to-BCD conversion.

PCB implementation should follow the package drawing and pin-description table in the onsemi family datasheet. Place the decoupling capacitor close to the supply and ground connections, route clock and control traces away from noisy analog or switching-power nodes, and use a consistent ground-return path. Decoupling requirements, operating voltage, and maximum clock frequency must follow the official family documentation rather than assumptions based on another package or counter variant.

This product page combines the device identity, package information, application guidance, comparison structure, and practical design considerations needed to plan a replacement or redesign. It also separates confirmed device facts from parameters that require verification against the manufacturer datasheet, helping engineers create a reproducible design review before committing the counter to a new PCB.

直接替换替代料: MC14510BF ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

MC14510BF 最大额定值与电气特性

Manufacturer onsemi
Product Type BCD up/down counter
Logic Family MC14510B CMOS counter family
Counting System BCD decimal counting
Count Direction Up/down
Output Interface 4-bit parallel BCD
Logic Category Counter IC / Divider
Package Type Flat package
Standard Packaging Bulk
Standard Package Quantity 1 unit
MSL 等级 3 (168 hours)
RoHS 状态 RoHS
REACH Status Vendor undefined
ECCN EAR99
HTSUS Code 8542.39.0001

MC14510BF 1 unit 引脚配置指南

MC14510BF(1 unit 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

MC14510BF 的 1 unit 封装引脚图

暂无详细引脚数据: MC14510BF.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MC14510BF 适用于 6 应用s: Industrial Timing and Sequencing, Digital Panel Meter Display, Laboratory Event Counter, Test Fixture Step Sequencer, Legacy Process Timer, Service and Repair Inventory.

🏭

Industrial Timing and Sequencing

The MC14510BF fits legacy industrial timers that count equal time intervals and step through a sequence. Its up/down capability lets the same counter advance during normal operation and reverse when a reset, rewind, or service command is asserted, while the parallel BCD output can feed decade-oriented actuator or display stages. Design the clock source so that its frequency and pulse shape remain within the family timing limits, and use the manufacturer truth table to define direction and reset priority. Because the exact supply range, propagation delay, and maximum clock frequency require datasheet confirmation, validate them against the operating conditions of the timer before production.

📺

Digital Panel Meter Display

The MC14510BF is useful in a legacy digital panel meter that must present decimal positions from a counter signal path. Four parallel BCD outputs correspond directly to one decimal digit, reducing the conversion burden compared with exposing a binary count to a display controller. Direction control can support count-up measurement and count-down interval modes within the same hardware. The implementation should include local clock routing, supply decoupling, and defined reset behavior so the displayed state remains predictable during startup. Confirm output timing, electrical levels, and pin assignments from the onsemi MC14510B datasheet before connecting the counter to the display driver.

🔧

Laboratory Event Counter

The MC14510BF can count recurring events in laboratory instrumentation where a decimal count is more convenient than an unrestricted binary value. Each valid clock event advances or reverses the count, and the BCD outputs can be observed by a controller, latched into a test system, or used to trigger another decade in a multi-digit instrument. Provide a clean event-derived clock and define how asynchronous external events are conditioned to avoid false counting. The engineer must also design a deterministic initialization path and verify the exact reset and clock truth table in the family documentation. Use the Request a Quote form for legacy inventory when maintaining this type of equipment.

🖥️

Test Fixture Step Sequencer

A test fixture can use the MC14510BF to advance or reverse through fixture positions, timing intervals, or programmed test steps. The up/down function supports a compact rewind behavior without replacing the counter with separate up and down devices, while the BCD output simplifies interface to decade-based control logic. Implement reset synchronization so power-up does not produce an unintended first transition, and route the clock away from motors, relays, and switching regulators. The design should be checked against the exact package pinout, supply limits, and timing specifications in the onsemi MC14510B datasheet. Legacy production should also include an approved alternate-component plan rather than assuming continued active sourcing.

⚡

Legacy Process Timer

The MC14510BF is applicable to legacy process timers that use count states to control stages, indicators, or actuators. Counting upward can represent elapsed cycles, while counting downward can represent a remaining interval toward zero. Its decimal organization is helpful when the surrounding control system uses BCD decades or electromechanical decade mechanisms. Design power and signal grounding carefully because timer logic may share a board with relays and high-current actuators. Keep the counter’s decoupling capacitor close to its supply pins and isolate clock traces from switching edges. Confirm operating-temperature, supply-voltage, and timing requirements in the family datasheet, and request current legacy availability before building replacement boards.

🧩

Service and Repair Inventory

MC14510BF is most practical in service organizations maintaining older industrial, laboratory, or display equipment that already contains the exact flat-package footprint and wiring. It can replace a failed counter without a board redesign when the required electrical and timing characteristics match. Repair inventory should record the original package drawing, pinout, supply voltage, clock frequency, and device markings because similar MC14510B package codes are not automatically interchangeable. For traceability and inspection planning, provide these details with the Request a Quote request. A modern redesign should use a currently supported counter and update the schematic, pin mapping, and PCB layout rather than treating a generic logic equivalent as an automatic replacement.

What is the onsemi MC14510BF?
The onsemi MC14510BF is a BCD up/down counter integrated circuit in a flat-package configuration. It counts upward or downward through decimal states and presents the current count through parallel BCD outputs. The device is classified as a counter IC and divider within the MC14510B logic family, making it appropriate for decimal sequencing, timing, and event-counting circuits.
What functions does the MC14510BF perform?
The MC14510BF combines decade counting, selectable up/down direction, and parallel BCD output in one integrated circuit. A clock input advances or reverses the count according to its control state, while the four output bits represent the current decimal value. Confirm the detailed operating modes, reset behavior, and output timing from the onsemi MC14510B datasheet before implementing the logic.
How does a BCD up/down counter differ from a binary counter?
A BCD up/down counter advances or reverses through ten decimal states, while a four-bit binary counter advances through sixteen states. BCD outputs can simplify interface with decimal displays and decade-oriented mechanisms. The MC14510BF uses the decimal format, so surrounding control logic should treat its outputs as four-bit values representing zero through nine rather than unrestricted binary values.
Where can I find the MC14510BF datasheet PDF?
The MC14510B family datasheet can be located through the MC14510BF documentation links on this page or through the manufacturer’s product documentation. Confirm the exact package drawing and pin assignments before routing the PCB because MC14510B family members exist in multiple package forms. Use the onsemi MC14510B datasheet as the controlling document for electrical limits, timing, and truth-table details.
Where can I find the MC14510BF pinout?
The MC14510BF pinout must be taken from the pin-description table in the onsemi MC14510B datasheet for the flat package. The MC14510BF suffix identifies the package variant, but the available product excerpts do not publish the numbered terminal assignments. Check the package drawing and pin table together so that clock, count-direction, reset, BCD outputs, supply, and ground are connected correctly.
Is the MC14510BF still active or obsolete?
The MC14510BF should be treated as an obsolete legacy logic device during new-design planning. Current listings present it through surplus channels rather than as a newly released active component. For a new design, evaluate a currently supported counter before committing the PCB; for repair or legacy-system continuation, request availability and traceability through the Request a Quote form.
How should I replace an MC14510BF in an existing PCB?
A replacement must match the existing footprint, pin functions, supply range, clock timing, output format, and direction-control behavior. No drop-in substitute is established by the available cross-reference results, so an engineer should not change the MPN based only on a generic counter description. First identify the exact package drawing and required timing, then validate a candidate against the MC14510B datasheet and manufacturer cross-reference guidance.
What is the best drop-in replacement for MC14510BF?
No confirmed drop-in replacement for MC14510BF is established by the available cross-reference results. A suitable replacement would need the same flat-package footprint, pin-to-pin functions, BCD up/down counting behavior, compatible supply voltage, and acceptable propagation delay. Use the Request a Quote form to request sourcing help, and require the selected manufacturer to confirm footprint and timing compatibility before purchase.
Can MC14510BF be used in an industrial timer?
Yes, the MC14510BF can be used in a legacy industrial timer when its clock frequency, supply voltage, and timing limits meet the system requirements. Its up/down counting capability supports interval sequencing, and its BCD outputs can drive decade-oriented display or control stages. Verify environmental limits, electrical timing, and availability against the onsemi family datasheet before deploying it in new equipment.
What can replace MC14510BF?
A valid MC14510BF replacement must provide equivalent BCD up/down counting and occupy the same PCB footprint without changing the clock, reset, direction-control, or output wiring. The available cross-reference search does not identify a confirmed drop-in device. Request a quote for legacy sourcing, or redesign around a currently supported counter and revise the schematic and layout as needed.
Is MC14510BF the same as MC14510BCP?
No. MC14510BF and MC14510BCP belong to the same MC14510B counter family, but the final package codes identify different physical packages. MC14510BF is listed as a flat-package variant, while MC14510BCP uses a different package designation. A package change can require a PCB redesign even when the counting function remains equivalent, so treat them as distinct orderable devices.
MC14510BF vs a modern counter IC: which is better for a new design?
A modern counter IC is generally better for a new design because it offers current lifecycle support, clearer supply-chain options, and typically more accessible documentation. MC14510BF remains relevant when maintaining an existing flat-board design that already uses its exact pinout and timing. For a new design, compare count width, direction control, interface voltage, package, timing, and lifecycle rather than selecting only by counter function.
What are the key specifications of MC14510BF that engineers should know?
The confirmed core specifications are BCD up/down counting, parallel decimal-state outputs, flat-package construction, bulk presentation, and onsemi MC14510B-family origin. Its MSL is listed as 3 for 168 hours, while RoHS and REACH status are separately identified in the product records. Supply voltage, clock limit, propagation delay, operating temperature, and exact pin count require confirmation from the family datasheet.
Where can I buy MC14510BF and check its price?
MC14510BF availability should be requested through the Request a Quote form on this page, with the required package, quantity, date code, and traceability needs stated clearly. Legacy counters can have fragmented stock and limited lot consistency, so confirm the manufacturer condition and incoming inspection requirements. Use the quote process rather than relying on a potentially stale market comparison.
What is the lead time for MC14510BF?
The current MC14510BF lead time depends on available legacy inventory, manufacturer condition, quantity, and inspection requirements. Because this device is no longer positioned as an active new-release component, no manufacturing lead time should be assumed. Submit the required quantity and traceability level through the Request a Quote form to obtain a current delivery commitment and stock confirmation.
How should MC14510BF be used with a BCD display?
Connect the MC14510BF’s parallel BCD outputs to the appropriate decade display-driver inputs, then use the clock and direction-control signals from the surrounding logic. The count normally advances or reverses through the decimal states zero through nine, allowing a display to follow the counter without continuous binary-to-BCD conversion in a microcontroller. Confirm signal levels, timing, and pin assignments in the family datasheet.

工程参考数据: MC14510BF ——对比、设计指导和合规信息。

选型指南

Choose MC14510BF when repairing or reproducing legacy equipment that specifically uses the onsemi MC14510B flat-package variant and requires BCD up/down counting. Its parallel BCD outputs are particularly useful with decimal displays, decade mechanisms, and control logic designed around decimal states. Do not select it automatically for a new design because it is obsolete and lacks a currently established drop-in replacement. For new products, compare a currently supported counter on count width, clock frequency, direction-control polarity, reset behavior, supply voltage, interface timing, package, and lifecycle status. If a legacy board must be maintained, verify the package drawing and pin table, capture the failed device markings, and request inspected or traceable inventory through the Request a Quote form. A functionally similar MC14510BCP is not an automatic substitute because its package designation differs and board rework may be required.

与替代料对比

参数 本产品
Package Flat package
Brand onsemi
Counter Type BCD up/down counter
Counting Format BCD
Output Interface Parallel BCD
Logic Family MC14510B
Packaging Form Bulk
MSL 3 (168 hours)
RoHS Status RoHS
ECCN EAR99

关键差异点

  • Bidirectional decimal counting in one counter (对比 MC14510BCP)
  • Parallel decimal-state output (对比 Conventional 4-bit binary counter)
  • 优势 (对比 Separate up-counter and down-counter implementation)

设计说明

Treat the MC14510BF as a mixed-signal board despite its digital-only function. Place its local supply-decoupling capacitor at the shortest practical path between the supply and ground terminals, and keep the return current beneath or adjacent to the device rather than routing it through noisy actuator currents. The exact terminal numbers must come from the package-specific pin table before PCB routing is released.

Route the clock as a short, continuous signal and provide a defined return path. If the clock originates from a relay contact, long cable, or noisy switching node, add conditioning rather than connecting it directly. Debounce external event sources in hardware or use a synchronous system clock where possible, because irregular pulses can create count errors that appear as incorrect BCD values.

Do not substitute an MC14510B package variant solely because its logic function is similar. Confirm the flat-package drawing, numbered pins, supply limits, direction-control polarity, reset behavior, and output timing against the onsemi MC14510B datasheet. A footprint or logic difference can cause reversed counting, failure to initialize, or an unusable BCD output even when the counter’s general description appears equivalent.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The product listing identifies RoHS status and reports REACH status as vendor undefined. No separate lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was established.

数据核验日期: 2026-11-11 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MC14510BF MC14510BF datasheet MC14510BF datasheet pdf MC14510BF pinout MC14510BF equivalent MC14510BF replacement MC14510BF cross reference MC14510BF flat package MC14510BF BCD up down counter onsemi MC14510BF MC14510BF price MC14510BF stock MC14510BF vs MC14510BCP MC14510BF legacy timer counter

相关元器件 & 术语

onsemi MC14510BF MC14510B MC14510BCP BCD up/down counter counter IC logic IC CMOS logic binary counter decimal counter parallel BCD output flat package bulk packaging clock input count direction control reset logic MSL 3 RoHS REACH EAR99 HTSUS 8542.39.0001 industrial timing digital panel meter test fixture sequencing
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情