MC14510BF - BCD Up/Down Counter | onsemi | Logic IC
部品番号: MC14510BF ✗ 生産終了MC14510BF 概要
A BCD up/down counter is a specialized type of counter IC that advances or reverses through ten states from zero through nine. This decimal-oriented behavior can simplify the interface between digital logic and ten-position displays because each decade is represented by four BCD output bits. The counter can therefore support decade-stepping, programmable timing, and sequential control functions. By contrast, a conventional binary counter advances through 16 states per four output bits, which may require additional conversion when a decimal display or decade-oriented mechanism is involved.
The MC14510BF uses four parallel BCD outputs to represent the current count. Typical system use requires a clock source, control logic for count direction, reset or initialization handling, and suitable decoupling close to the power terminals. Because the part belongs to the MC14510B family, designers should consult the family datasheet for the exact electrical limits, truth table, propagation timing, supply-voltage range, and pin assignments before finalizing a PCB.
MC14510BF is suitable for industrial sequencing equipment, laboratory timers, digital panel meters, test fixtures, event counters, and embedded control subsystems. In a timer or sequencer, the up/down capability allows the same counter to advance through timing intervals or reverse when a control event requests a return to the starting state. In an instrument, the BCD outputs can feed display-driver circuitry without requiring the system controller to perform repeated binary-to-BCD conversion.
PCB implementation should follow the package drawing and pin-description table in the onsemi family datasheet. Place the decoupling capacitor close to the supply and ground connections, route clock and control traces away from noisy analog or switching-power nodes, and use a consistent ground-return path. Decoupling requirements, operating voltage, and maximum clock frequency must follow the official family documentation rather than assumptions based on another package or counter variant.
This product page combines the device identity, package information, application guidance, comparison structure, and practical design considerations needed to plan a replacement or redesign. It also separates confirmed device facts from parameters that require verification against the manufacturer datasheet, helping engineers create a reproducible design review before committing the counter to a new PCB.
ドロップイン代替品: MC14510BF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストMC14510BF 最大定格&電気的特性
| Manufacturer | onsemi |
| Product Type | BCD up/down counter |
| Logic Family | MC14510B CMOS counter family |
| Counting System | BCD decimal counting |
| Count Direction | Up/down |
| Output Interface | 4-bit parallel BCD |
| Logic Category | Counter IC / Divider |
| Package Type | Flat package |
| Standard Packaging | Bulk |
| Standard Package Quantity | 1 unit |
| MSLレベル | 3 (168 hours) |
| RoHS ステータス | RoHS |
| REACH Status | Vendor undefined |
| ECCN | EAR99 |
| HTSUS Code | 8542.39.0001 |
MC14510BF 1 unit ピン配置ガイド
MC14510BF (1 unit パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC14510BF.
詳細は データシート をご参照ください。
主な用途
MC14510BF の用途: 6 件s: Industrial Timing and Sequencing, Digital Panel Meter Display, Laboratory Event Counter, Test Fixture Step Sequencer, Legacy Process Timer, Service and Repair Inventory.
Industrial Timing and Sequencing
The MC14510BF fits legacy industrial timers that count equal time intervals and step through a sequence. Its up/down capability lets the same counter advance during normal operation and reverse when a reset, rewind, or service command is asserted, while the parallel BCD output can feed decade-oriented actuator or display stages. Design the clock source so that its frequency and pulse shape remain within the family timing limits, and use the manufacturer truth table to define direction and reset priority. Because the exact supply range, propagation delay, and maximum clock frequency require datasheet confirmation, validate them against the operating conditions of the timer before production.
おすすめ
Digital Panel Meter Display
The MC14510BF is useful in a legacy digital panel meter that must present decimal positions from a counter signal path. Four parallel BCD outputs correspond directly to one decimal digit, reducing the conversion burden compared with exposing a binary count to a display controller. Direction control can support count-up measurement and count-down interval modes within the same hardware. The implementation should include local clock routing, supply decoupling, and defined reset behavior so the displayed state remains predictable during startup. Confirm output timing, electrical levels, and pin assignments from the onsemi MC14510B datasheet before connecting the counter to the display driver.
おすすめ
Laboratory Event Counter
The MC14510BF can count recurring events in laboratory instrumentation where a decimal count is more convenient than an unrestricted binary value. Each valid clock event advances or reverses the count, and the BCD outputs can be observed by a controller, latched into a test system, or used to trigger another decade in a multi-digit instrument. Provide a clean event-derived clock and define how asynchronous external events are conditioned to avoid false counting. The engineer must also design a deterministic initialization path and verify the exact reset and clock truth table in the family documentation. Use the Request a Quote form for legacy inventory when maintaining this type of equipment.
おすすめ
Test Fixture Step Sequencer
A test fixture can use the MC14510BF to advance or reverse through fixture positions, timing intervals, or programmed test steps. The up/down function supports a compact rewind behavior without replacing the counter with separate up and down devices, while the BCD output simplifies interface to decade-based control logic. Implement reset synchronization so power-up does not produce an unintended first transition, and route the clock away from motors, relays, and switching regulators. The design should be checked against the exact package pinout, supply limits, and timing specifications in the onsemi MC14510B datasheet. Legacy production should also include an approved alternate-component plan rather than assuming continued active sourcing.
おすすめ
Legacy Process Timer
The MC14510BF is applicable to legacy process timers that use count states to control stages, indicators, or actuators. Counting upward can represent elapsed cycles, while counting downward can represent a remaining interval toward zero. Its decimal organization is helpful when the surrounding control system uses BCD decades or electromechanical decade mechanisms. Design power and signal grounding carefully because timer logic may share a board with relays and high-current actuators. Keep the counter’s decoupling capacitor close to its supply pins and isolate clock traces from switching edges. Confirm operating-temperature, supply-voltage, and timing requirements in the family datasheet, and request current legacy availability before building replacement boards.
おすすめ
Service and Repair Inventory
MC14510BF is most practical in service organizations maintaining older industrial, laboratory, or display equipment that already contains the exact flat-package footprint and wiring. It can replace a failed counter without a board redesign when the required electrical and timing characteristics match. Repair inventory should record the original package drawing, pinout, supply voltage, clock frequency, and device markings because similar MC14510B package codes are not automatically interchangeable. For traceability and inspection planning, provide these details with the Request a Quote request. A modern redesign should use a currently supported counter and update the schematic, pin mapping, and PCB layout rather than treating a generic logic equivalent as an automatic replacement.
おすすめ
エンジニアリング参考データ: MC14510BF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | Flat package |
| Brand | onsemi |
| Counter Type | BCD up/down counter |
| Counting Format | BCD |
| Output Interface | Parallel BCD |
| Logic Family | MC14510B |
| Packaging Form | Bulk |
| MSL | 3 (168 hours) |
| RoHS Status | RoHS |
| ECCN | EAR99 |
主な差別化要因
- Bidirectional decimal counting in one counter (vs MC14510BCP)
- Parallel decimal-state output (vs Conventional 4-bit binary counter)
- 特長 (vs Separate up-counter and down-counter implementation)
設計ノート
Treat the MC14510BF as a mixed-signal board despite its digital-only function. Place its local supply-decoupling capacitor at the shortest practical path between the supply and ground terminals, and keep the return current beneath or adjacent to the device rather than routing it through noisy actuator currents. The exact terminal numbers must come from the package-specific pin table before PCB routing is released.
Route the clock as a short, continuous signal and provide a defined return path. If the clock originates from a relay contact, long cable, or noisy switching node, add conditioning rather than connecting it directly. Debounce external event sources in hardware or use a synchronous system clock where possible, because irregular pulses can create count errors that appear as incorrect BCD values.
Do not substitute an MC14510B package variant solely because its logic function is similar. Confirm the flat-package drawing, numbered pins, supply limits, direction-control polarity, reset behavior, and output timing against the onsemi MC14510B datasheet. A footprint or logic difference can cause reversed counting, failure to initialize, or an unusable BCD output even when the counter’s general description appears equivalent.
コンプライアンス情報
The product listing identifies RoHS status and reports REACH status as vendor undefined. No separate lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was established.