NXP Semiconductors

MC33394DH - 3A Multi-Output Power Supply | NXP Semiconductors

料号: MC33394DH ✓ 量产中
4 V to 26.5 V Vdss 3.0 A Id 44-HSOP with exposed pad Package
最小起订量: 1 |

MC33394DH 概述

The NXP Semiconductors MC33394DH is a multi-output switch-mode power supply IC with integrated linear regulators and a high-speed CAN transceiver, designed for Motorola MPC55x and MPC56x microprocessor systems. The device combines a switching regulator with an internal 3.0 A current limit, buck-mode or boost-mode operation, and a pre-regulated output for multiple automotive power rails. It is supplied in a 44-pin HSOP package with an exposed pad and is specified for a 4 V to 26.5 V supply range.

A multi-output power supply IC combines switching conversion, low-dropout regulation, supervisory functions, and communication circuitry into one device for embedded automotive electronics. The switching stage reduces the difference between the battery input and regulated rail, while the integrated LDO outputs provide lower-noise voltage rails for processors, sensors, memory, and communication interfaces. This integration reduces the number of discrete regulators and supports efficient power sequencing in vehicle electronic control units.

The MC33394DH provides VDDH at 5.0 V and 400 mA, VDD3_3 at 3.3 V and 120 mA, and VDDL at 2.6 V with user scaling between 3.3 V and 1.25 V at up to 400 mA typically. The VDDL output uses an external NPN pass transistor. A scalable keep-alive regulator, VKAM, supplies approximately 50 mA. The switching regulator operates in buck mode or boost mode and includes an internal 3.0 A current limit.

The integrated high-speed CAN transceiver makes the IC appropriate for automotive and industrial applications requiring both local power management and network connectivity. A typical architecture places the MC33394DH near the vehicle power connector, derives several regulated rails for an MCU and its peripherals, and uses the CAN interface to communicate with sensors, actuators, or diagnostic equipment. The external NPN pass transistor allows the VDDL regulator to scale its output while keeping the high-current switching path outside the IC.

Designers should pay close attention to the 4 V minimum operating input, the 26.5 V maximum operating input, regulator current ratings, external transistor selection, exposed-pad thermal management, and the required external compensation and storage components. The manufacturer datasheet should be used for the complete pin assignment, recommended application circuit, electrical limits, timing information, and PCB layout guidance.

This page combines the core electrical capabilities, application context, and design considerations for engineers evaluating the MC33394DH in an embedded automotive power architecture. It also identifies the exact package, supported power rails, and the design parameters that should be checked before PCB release.

直接替换替代料: MC33394DH ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

MC33394DH 最大额定值与电气特性

Product Type Multi-output switch-mode power supply with integrated linear regulators and CAN transceiver
Manufacturer NXP Semiconductors
Switching Regulator Current Limit 3.0 A
Switching Regulator Modes Buck mode or boost mode
输入电压范围 4 V to 26.5 V
VDDH Output Voltage 5.0 V
VDDH Output Current 400 mA
VDD3_3 Output Voltage 3.3 V
VDD3_3 Output Current 120 mA
VDDL Output Voltage 2.6 V, user scalable between 3.3 V and 1.25 V
VDDL Output Current 400 mA typically
VDDL Pass Device External NPN pass transistor
VKAM Output Current 50 mA
CAN Interface Integrated high-speed CAN transceiver
封装 44-HSOP with exposed pad
安装类型 Surface mount
Automotive Processor Support Motorola MPC55x and MPC56x microprocessors

MC33394DH 44-hsop with exposed pad 引脚配置指南

MC33394DH(44-hsop with exposed pad 封装)的引脚配置。 该功率器件具有栅极、漏极和源极端子。对于无极性封装,请参阅制造商数据手册以了解确切的引脚 1 方向和封装尺寸细节。常见应用包括电源设计、电机驱动和负载开关。

MC33394DH 的 44-hsop with exposed pad 封装引脚图

暂无详细引脚数据: MC33394DH.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MC33394DH 适用于 6 应用s: Automotive Electronic Control Unit Power, MPC55x Microprocessor Control Platform, MPC56x Automotive Processor Platform, CAN-Connected Industrial Sensor Node, Body and Chassis Control Module, Industrial Motor and Actuator Controller.

🚗

Automotive Electronic Control Unit Power

The MC33394DH fits automotive electronic control units that need several power rails and CAN connectivity from one device. Its switching regulator supports buck or boost operation with an internal 3.0 A current limit, while VDDH supplies 5.0 V at 400 mA and VDD3_3 supplies 3.3 V at 120 mA. The scalable VDDL rail supports MCU core and peripheral power from 1.25 V to 3.3 V, with an external NPN pass transistor providing the high-current path. In a vehicle network node, the integrated high-speed CAN transceiver can link the controller to sensors and actuators. Designers should follow the NXP application circuit for compensation, storage, pass-transistor selection, and exposed-pad thermal layout.

🔧

MPC55x Microprocessor Control Platform

The MC33394DH is suited to MPC55x-based control platforms requiring dedicated processor and peripheral rails. Its 5.0 V VDDH output supports up to 400 mA, the 3.3 V VDD3_3 rail supports up to 120 mA, and the scalable VDDL output can be adjusted between 1.25 V and 3.3 V for processor-related loads. This integration allows a compact ECU power architecture without implementing every regulator as a separate component. The external NPN pass transistor associated with VDDL must be sized for the intended output current and thermal conditions. PCB placement should minimize loop area in the switching stage and provide substantial copper beneath the 44-HSOP exposed pad.

🏭

MPC56x Automotive Processor Platform

The MC33394DH supports MPC56x embedded platforms by combining a wide 4 V to 26.5 V supply input with multiple regulated outputs. VDDH at 5.0 V and 400 mA can serve general 5 V circuitry, VDD3_3 at 3.3 V and 120 mA can support compatible peripherals, and VDDL can be scaled for lower-voltage processor requirements. The high-speed CAN transceiver provides a direct network interface alongside the power-management functions. This arrangement is useful when component count and ECU board area are important. The complete reference design should still be reviewed for startup behavior, current sharing, inductor selection, and thermal performance under worst-case vehicle conditions.

🌐

CAN-Connected Industrial Sensor Node

The MC33394DH can support industrial sensor nodes that require regulated logic power and a high-speed CAN connection. The buck-or-boost switching stage accommodates different source conditions, while the internal 3.0 A current limit protects the converter during overload conditions. VDDH at 5.0 V can power compatible sensors, VDD3_3 at 3.3 V can support digital interfaces, and the VKAM keep-alive rail at approximately 50 mA can support retention or low-power functions where applicable. The integrated CAN transceiver reduces the number of external interface components. Industrial implementations should verify the complete electrical limits, EMC requirements, and environmental qualification in the NXP datasheet before deployment.

🚙

Body and Chassis Control Module

The MC33394DH is appropriate for body and chassis modules that coordinate switches, lamps, sensors, and actuators through a CAN network. Its 4 V to 26.5 V input range accommodates automotive electrical environments, while VDDH, VDD3_3, and scalable VDDL outputs support mixed logic voltage domains. The integrated CAN transceiver enables network communication without requiring a separate physical-layer device. The 44-HSOP exposed pad and high-current switching section require careful layout to control thermal rise and electromagnetic interference. Use the NXP reference information to select the external NPN pass transistor, inductor, compensation network, and input and output capacitors around the device.

🏭

Industrial Motor and Actuator Controller

The MC33394DH can serve as the local power manager in an industrial motor or actuator controller that also uses CAN for command and diagnostic traffic. The switching regulator supplies pre-regulated energy for the VDDH, VDD3_3, and VDDL outputs, while its 3.0 A current limit provides a defined overload threshold. The VDDL rail supports user-scalable voltages down to 1.25 V, which is useful for programmable control logic and sensor interfaces. Because actuator systems may experience large transients and thermal variation, the input network, pass transistor, and exposed-pad copper must be validated for the actual load profile. The manufacturer application circuit remains the starting point for component selection and layout.

What is the MC33394DH?
The MC33394DH is a NXP Semiconductors multi-output switch-mode power supply IC with integrated linear regulators and a high-speed CAN transceiver. According to the NXP MC33394 datasheet, it is intended for Motorola MPC55x and MPC56x microprocessor systems and includes a switching regulator with an internal 3.0 A current limit. The device is packaged in a 44-HSOP with an exposed pad.
What is the operating voltage of MC33394DH?
The MC33394DH operates from 4 V to 26.5 V. The manufacturer product information identifies the device as a 4 V to 26.5 V power-management IC for automotive and industrial embedded systems. This voltage range allows the device to operate from regulated vehicle power systems while providing multiple lower-voltage rails for processors and peripherals.
What output voltages does the MC33394DH provide?
The MC33394DH provides VDDH at 5.0 V, VDD3_3 at 3.3 V, and VDDL at 2.6 V with user scaling between 3.3 V and 1.25 V. The manufacturer datasheet also identifies a scalable VKAM keep-alive regulator at approximately 50 mA. VDDL uses an external NPN pass transistor for the adjustable high-current output.
How much current can the MC33394DH switching regulator supply?
The MC33394DH switching regulator includes an internal 3.0 A current limit and can operate in either buck mode or boost mode. Its regulated outputs include VDDH at 400 mA, VDD3_3 at 120 mA, and VDDL at 400 mA typically. The external NPN pass transistor is used with the scalable VDDL rail.
Is the MC33394DH suitable for automotive applications?
The MC33394DH is designed for automotive and industrial power-management systems, including MPC55x and MPC56x microprocessor platforms. Its 4 V to 26.5 V operating range, integrated high-speed CAN transceiver, and multi-output regulator architecture support vehicle electronic control units. AEC-Q100 status and the complete environmental qualification details should be confirmed against the manufacturer datasheet before production release.
Where can I download the MC33394DH datasheet PDF?
The official MC33394 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/MC33394.pdf. It contains the authoritative pin descriptions, electrical characteristics, regulator limits, CAN interface information, recommended external components, and application guidance. Use the manufacturer document for the final schematic and PCB design.
Where can I find the MC33394DH pinout?
The MC33394DH pinout is identified in the NXP MC33394 datasheet, whose official PDF link is https://www.nxp.com/docs/en/data-sheet/MC33394.pdf. The device uses a 44-HSOP package with an exposed pad. Use the pin-description table and package drawing in that datasheet when assigning PCB nets and confirming exposed-pad connection.
What is the difference between the MC33394DH and MC33394?
MC33394DH is the orderable 44-HSOP package designation for the MC33394 family, while MC33394 denotes the underlying device family. The manufacturer datasheet covers the MC33394 specifications and the NXP ordering information identifies the DH package option. Before substitution, confirm the exact suffix, pin assignment, exposed-pad treatment, temperature range, and qualification status in the ordering information.
What is the best drop-in replacement for the MC33394DH?
The MC33394DH does not have a confirmed drop-in replacement in the available cross-reference records. A valid replacement must use the same 44-HSOP footprint, preserve the complete pin and exposed-pad arrangement, and match the 4 V to 26.5 V input range plus the regulator and CAN functions. Request a quote through the Request a Quote form on this page for sourcing and lifecycle assistance.
Can an equivalent NXP MC33394 device replace the MC33394DH?
A replacement should be selected only after the manufacturer ordering information confirms identical package dimensions, pin functions, exposed-pad requirements, and electrical limits. The available records identify MC33394DH as the 44-HSOP ordering option, but they do not establish another suffix as a qualified drop-in replacement. Use the Request a Quote form on this page to request current availability and engineering review.
When should I choose the MC33394DH over a discrete regulator design?
Choose the MC33394DH when an embedded automotive or industrial design needs several regulated rails together with a high-speed CAN interface in one 44-HSOP device. The integrated architecture can reduce regulator and communication component count compared with a discrete design. The trade-off is that the system must follow the manufacturer application circuit and account for the external NPN pass transistor, compensation, and exposed-pad thermal requirements.
What are the key specifications of MC33394DH that engineers should know?
The key MC33394DH specifications are a 4 V to 26.5 V input range, a 3.0 A switching-regulator current limit, 5.0 V VDDH at 400 mA, 3.3 V VDD3_3 at 120 mA, scalable VDDL from 1.25 V to 3.3 V at 400 mA typically, and an integrated high-speed CAN transceiver. The package is 44-HSOP with an exposed pad.
How is the MC33394DH used in an automotive ECU power supply?
The MC33394DH is typically placed at the input of an automotive electronic control unit, where it converts the vehicle supply into regulated processor and peripheral rails. Its switching regulator supports buck or boost operation, while the integrated LDO outputs provide dedicated voltages for the MCU, memory, sensors, and CAN circuitry. The VDDL rail uses an external NPN pass transistor, and the exposed pad requires the thermal layout specified by NXP.
How should the MC33394DH exposed pad be handled during PCB design?
The exposed pad is part of the 44-HSOP thermal and electrical design and should be connected according to the NXP datasheet land pattern. Provide the recommended copper area and thermal vias beneath the package, then verify the resulting junction temperature for the highest expected regulator and ambient conditions. Do not leave the pad floating without confirming the manufacturer pin-description table.
Where can I buy MC33394DH and check its current lead time?
Use the Request a Quote form on this page to request MC33394DH availability, current lead time, order quantity, and packaging details. Because the commercial record contains no confirmed current stock statement or exact quantity-break price table, the page does not publish a static price. A sourcing review can also confirm whether the requested suffix and 44-HSOP package are currently available.

工程参考数据: MC33394DH ——对比、设计指导和合规信息。

选型指南

Choose the MC33394DH when an embedded automotive or industrial design needs a 4 V to 26.5 V input, multiple regulated outputs, and an integrated high-speed CAN transceiver in a single 44-HSOP device. It is particularly useful for MPC55x and MPC56x controller platforms where VDDH, VDD3_3, scalable VDDL, and keep-alive power are required. Its switching stage offers buck or boost operation with a 3.0 A current limit, but the current rating applies to that stage rather than every regulator output. The design must also accommodate an external NPN pass transistor for VDDL and careful exposed-pad cooling. A discrete regulator architecture may provide more flexibility when only one rail is needed, lower switching complexity is preferred, or no CAN interface is required. Confirm the complete pinout, external component values, thermal limits, and qualification status in the NXP datasheet before schematic release.

设计说明

Route the switching-regulator current path and the MC33394DH exposed pad according to the NXP datasheet land pattern. Provide the recommended exposed-pad copper and thermal-via structure, then calculate worst-case junction temperature from regulator dissipation, ambient temperature, and the realized board thermal resistance. Do not estimate thermal performance from package area alone because the external NPN pass transistor and surrounding power components also dissipate energy.

Place the input capacitor, switching inductor, compensation elements, output capacitors, and external NPN pass transistor close to their associated IC pins. Keep the high-current switching loop compact to reduce EMI and voltage ringing. Connect the 44-HSOP exposed pad according to the manufacturer pin-description table and package drawing, and route sensitive CAN and low-current signal paths away from the switching node.

Validate each rail independently for startup sequencing, minimum load behavior, transient response, and the stated current limits: 400 mA for VDDH, 120 mA for VDD3_3, and 400 mA typically for VDDL. The internal 3.0 A current limit belongs to the switching regulator and should not be treated as a continuous-output rating for every downstream rail. Select the external NPN pass transistor using the VDDL requirements from the datasheet.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available product information identifies automotive and industrial applications but does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these declarations against the manufacturer product page and current quality documentation before procurement.

相关搜索

MC33394DH datasheet MC33394DH datasheet pdf MC33394DH pinout MC33394DH specifications MC33394DH equivalent MC33394DH replacement MC33394DH cross reference NXP MC33394DH MC33394DH 44-HSOP MC33394DH application circuit MC33394DH price MC33394DH stock

相关元器件 & 术语

NXP Semiconductors MC33394DH MC33394 Motorola MPC55x Motorola MPC56x multi-output power supply switch-mode power supply SMPS linear regulator LDO low-dropout regulator high-speed CAN transceiver CAN buck mode boost mode 3.0 A current limit VDDH VDD3_3 VDDL VKAM external NPN pass transistor 44-HSOP HSOP exposed pad surface mount automotive electronic control unit
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情