MC9S08DV60CLF - 8-Bit 40MHz 60KB MCU | NXP Semiconductors
料号： MC9S08DV60CLF ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MC9S08DV60CLF 概述
An HCS08 microcontroller is an 8-bit embedded-control semiconductor within the microcontroller, processor, and embedded-systems hierarchy. This device combines flash-resident firmware, RAM, interrupt handling, serial communication, analog conversion, timers, and general-purpose I/O in one package. The MC9S08DV60 family is appropriate when a product needs a compact controller for sensing, actuator control, display interaction, communication, or industrial automation rather than the processing power of a 32-bit MCU.
The verified feature set includes a 40MHz HCS08 CPU with a 20MHz bus, the HC08 instruction set with the added BGND instruction, 39 I/O according to one distributor specification source, and 53 general-purpose input/output pins plus one input-only pin in the manufacturer datasheet listing. The memory and timing characteristics make it suitable for firmware with moderate code size and responsive control-loop execution. The ADC and multiple interrupt sources support sensor acquisition and event-driven control.
Typical uses include industrial control panels, motor and actuator interfaces, instrumentation, keypad systems, communication equipment, sensor nodes, and compact embedded controllers. The device can be paired with external memory, sensors, transceivers, regulators, and display drivers when the application requires more connectivity than the integrated resources provide. The 48-LQFP package exposes more I/O than smaller packages and supports straightforward PCB routing when pin density is acceptable.
Designers should verify the clock source, memory map, ADC reference, pin multiplexing, and operating-voltage limits against the manufacturer datasheet before layout. Because the supplied data does not include complete electrical timing limits, pin names, pricing, or lifecycle declarations, those values must be confirmed from the official NXP documentation rather than inferred.
直接替换替代料： MC9S08DV60CLF ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MC9S08DV60CLF （相同外形与封装尺寸） ——差异在于 Package.
快速对比工具——选择替代料号进行并排对比：
MC9S08JM60CLD
✅ 直接替换✓ 有现货
$4.4 / 个
查看数据手册 →MC9S08FL8CLC
✅ 直接替换📋 参考替代料（不在目录中）
MC9S08DV60CLF 最大额定值与电气特性
| Product Type | 8-bit HCS08 embedded microcontroller |
| Program Memory Size | 60KB (60K x 8) Flash |
| RAM Size | 3K x 8 RAM |
| CPU Speed | 40MHz |
| Bus Speed | 20MHz |
| Instruction Set | HC08 instruction set with added BGND instruction |
| Number of I/O | 39 I/O according to the supplied distributor specification |
| General-Purpose I/O | 53 pins plus 1 input-only pin in the supplied manufacturer datasheet listing |
| ADC Channels | 16 channels |
| ADC Resolution | 12-bit |
| ADC Conversion Time | 2.5 s as stated in the supplied distributor specification |
| Interrupt and Reset Sources | Up to 32 interrupt/reset sources |
| Oscillator Type | External |
| Program Memory Type | Flash |
| 封装 | 48-LQFP (7x7 mm) |
| 安装类型 | Surface Mount |
| Packaging | Tray |
| Manufacturer | NXP Semiconductors |
MC9S08DV60CLF 48-lqfp (7x7 mm) 引脚配置指南
MC9S08DV60CLF（48-lqfp (7x7 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MC9S08DV60CLF.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC9S08DV60CLF 适用于 6 应用s: Industrial Sensor and Control Panel, Motor and Actuator Interface, Battery-Powered Sensor Node, Instrumentation and Data Acquisition, Communication Equipment Interface, Human Interface and Display Controller.
Industrial Sensor and Control Panel
The MC9S08DV60CLF fits compact industrial control panels that combine analog sensing with digital supervisory logic. Its 16-channel, 12-bit ADC provides a practical basis for monitoring temperature, pressure, level, or potentiometer inputs, while the 40MHz HCS08 CPU can handle event responses and control state machines. The supplied manufacturer datasheet listing identifies 53 general-purpose I/O pins plus one input-only pin, allowing the controller to connect switches, indicators, relays, and communication peripherals. Use a separate regulated supply and protection network where required, because the supplied data does not define the operating-voltage range or industrial temperature rating. Validate the ADC reference, sampling strategy, and isolation requirements against the official NXP datasheet before production release.
推荐
Motor and Actuator Interface
The MC9S08DV60CLF is suitable for basic motor, valve, relay, and actuator supervisory designs where an 8-bit controller is sufficient. Its 40MHz CPU supports responsive interrupt-driven sequencing, and its large I/O complement can expose digital enables, direction signals, status inputs, and fault outputs. A 48-LQFP package also provides more routing flexibility than a very small leaded package. The MCU should not directly drive high-current loads; use appropriately rated transistors, drivers, isolation, and flyback protection. The supplied data does not include motor-driver timing or absolute maximum ratings, so the design must verify startup, stall, surge, and thermal conditions independently.
推荐
Battery-Powered Sensor Node
The MC9S08DV60CLF can form the control core of a low-duty-cycle sensor node when firmware can fit within 60KB of Flash and 3K x 8 RAM. The ADC supports sensor conditioning, while the external oscillator requirement calls for a deliberate clock source and low-power design. Because the verified data does not specify standby current, active current, supply voltage, or wake-up time, battery life cannot be predicted from the supplied information. A production design should use the official datasheet to select the clock, measure sleep-mode behavior, and account for regulator quiescent current and sensor leakage. Secure OTA updates are not established by the available data and should be treated as a separate design requirement.
推荐
Instrumentation and Data Acquisition
The MC9S08DV60CLF is a reasonable candidate for compact instrumentation front ends that need local conversion, filtering, status reporting, and operator input. The 16-channel 12-bit ADC can capture multiple analog channels, while the CPU can perform calibration bookkeeping, averaging, thresholding, and data framing. Its 60KB Flash capacity is suitable for moderate embedded firmware and 3K x 8 RAM supports compact working buffers. The reported 2.5 s ADC conversion time is unusually high for a general-purpose instrumentation loop, so it must be checked against the official NXP datasheet before selecting the MCU for high-rate sampling. External buffering, protection, precision references, and communications may be required for laboratory-grade accuracy.
推荐
Communication Equipment Interface
The MC9S08DV60CLF can supervise communication equipment when the design needs a dedicated 8-bit controller for status, configuration, and peripheral coordination. Its broad I/O availability can support UART, SPI, control signals, indicators, and external transceiver interfaces, while the 40MHz CPU provides headroom for protocol handling beyond a simple polling loop. The exact integrated serial peripherals, baud-rate limits, and timing parameters are not included in the supplied data, so firmware engineers must verify them in the official datasheet. Use level translation and ESD protection where external connectors or longer cable runs are involved. Firmware should include watchdog recovery and communication timeout handling because the verified data does not establish those safety features.
推荐
Human Interface and Display Controller
The MC9S08DV60CLF can manage keypads, indicators, small displays, and menu-driven control panels because it combines moderate Flash, RAM, GPIO capacity, and event-handling capability. The 48-LQFP package offers a useful number of external connections for display lines, switches, LEDs, and interface transceivers. Firmware can implement debouncing, state machines, diagnostics, and power sequencing without relying on a high-level operating system. Display-specific timing, contrast, backlight current, and ESD requirements are not covered by the supplied data, so the designer should choose external drivers based on the actual panel. Keep high-current display and relay loads away from MCU traces where possible to reduce ground bounce and analog noise.
推荐
推荐产品汇总
工程参考数据： MC9S08DV60CLF ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC9S08JM60CLD | MC9S08FL8CLC |
|---|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP package class stated in comparison lead | 48-LQFP package class stated in comparison lead |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Architecture | 8-bit HCS08 | MC9S08JM60 family; detailed CPU data not supplied | MC9S08 family; detailed CPU data not supplied |
关键差异点
- Verified 60KB Flash and 3K x 8 RAM configuration （对比 MC9S08JM60CLD)
- 40MHz CPU with 20MHz bus （对比 MC9S08FL8CLC)
- 16-channel 12-bit ADC （对比 MC9S08JM60CLD)
设计说明
The supplied data does not include the MC9S08DV60CLF operating-voltage range, active current, or standby current. Before routing the power tree, verify those limits in the NXP datasheet and design the external clock, analog reference, and digital I/O supplies against the same limits. If the 16-channel ADC is used, provide a stable reference and separate noisy digital return paths to avoid measurement errors.
Keep the external oscillator and its associated grounding path compact and away from ADC input and other high-impedance nodes. Route the 48-LQFP leads according to the official pin table, and use a stable ground plane with short decoupling connections at the supply pins. The supplied data confirms 48-LQFP packaging but does not supply the numbered pinout, so do not finalize placement from distributor summaries.
Do not treat the 40MHz CPU rating as a 40MHz peripheral or ADC sampling rate. The bus is listed at 20MHz, and the ADC conversion-time statement in the supplied data is 2.5 s, which requires verification in the official datasheet. Confirm interrupt priorities, timer clocking, flash wait states, and watchdog behavior in firmware before assuming deterministic control timing.
合规信息
The supplied verified data does not state compliance or qualification information. Confirm current RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with NXP or an authorized supplier.