MC9S08QA2CFQE - 8-Bit 20MHz 2KB MCU | NXP
料号: MC9S08QA2CFQE ✗ 停产MC9S08QA2CFQE 概述
An MCU is a microcontroller: a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The S08 architecture belongs to the embedded microcontroller hierarchy, where a central processing unit executes firmware and dedicated peripherals handle timers, serial communication, resets, and low-voltage detection. This integration reduces component count and board area compared with a processor and separate memory or interface devices.
The MC9S08QA2CFQE provides 2 KB of flash for firmware storage and 160 bytes of random-access memory for working data. Its listed operating supply spans 1.8 V to 3.6 V, making it suitable for low-voltage portable equipment, battery-powered controls, and compact industrial modules. The 20 MHz bus speed supports deterministic control tasks, while the S08 family also includes two very low-power stop modes for reducing current consumption when the application does not need continuous processing.
The 8-DFN exposed-pad package, identified in listings as 8-DFN-EP or VSON-8-EP at 4 x 4 mm, supports surface-mount assembly and provides a central thermal and electrical connection to the PCB. Because the exposed pad requires careful layout, its thermal pad should be connected according to the manufacturer's package guidance. The 4 x 4 mm land pattern is especially useful where board area is constrained, although exposed-pad soldering and inspection require process controls beyond a standard leaded package.
Typical uses include compact appliance controls, low-voltage sensor interfaces, battery-powered accessories, simple motor-control nodes, and small serial-interface products. A designer can connect digital sensors or actuators to the MCU's I/O, use its on-chip memory for a compact control program, and enter a low-power mode between events. Firmware and peripheral assignments must be checked against the complete manufacturer pin-description and memory tables before PCB release.
The principal design trade-off is lifecycle risk: NXP marks the MC9S08QA4 series as end of life, so inventory should not be treated as an indefinite production guarantee. Firmware development should minimize dependence on undocumented behaviors, and the PCB should be reviewed for exposed-pad soldering, thermal dissipation, and low-voltage brownout behavior. The component page also provides procurement options through its Request a Quote form.
This product summary combines the device's architecture, memory configuration, package details, lifecycle position, and engineering constraints with practical application guidance. It also identifies same-family alternatives and explains where a footprint-compatible substitution still requires firmware, memory-capacity, and peripheral verification before design approval.
直接替换替代料: MC9S08QA2CFQE ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MC9S08QA2CFQE (相同外形与封装尺寸) ——差异在于 Package, RAM.
MC9S08QA4CFQE
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MC9S08QA1CFQE
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MC9S08QA2CFQE 最大额定值与电气特性
| Microcontroller Type | 8-bit S08 microcontroller |
| Architecture | CISC |
| Maximum Listed Bus Speed | 20 MHz |
| S08 Core Speed for QA4 Series | 40 MHz |
| Flash Memory | 2 KB |
| Flash Organization | 2K x 8 |
| RAM | 160 bytes |
| 工作电源电压 | 1.8 V to 3.6 V |
| Nominal Supply Levels | 2.5 V and 3.3 V |
| Low-Power Modes | 2 stop modes |
| Low-Voltage Detection | Reset or interrupt |
| 封装 | 8-DFN exposed pad, 4 x 4 mm |
| Alternative Package Designation | 8-VDFN-EP or VSON-8-EP |
| 安装类型 | Surface mount |
| Shipping Configuration | Tray |
| 生命周期状态 | End of life |
| RoHS 状态 | Compliant |
MC9S08QA2CFQE 8-vdfn-ep or vson-8-ep 引脚配置指南
MC9S08QA2CFQE(8-vdfn-ep or vson-8-ep 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: MC9S08QA2CFQE.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC9S08QA2CFQE 适用于 6 应用s: Battery-Powered Sensor Interface, Compact Appliance Control, Simple Motor-Control Node, Low-Voltage Serial Interface Product, Portable Accessory Controller, Embedded Measurement and Control Module.
Battery-Powered Sensor Interface
The MC9S08QA2CFQE fits a compact, battery-powered sensor interface that uses an 8-bit control routine and a 20 MHz maximum bus speed. Its 1.8 V to 3.6 V operating range supports low-voltage supply designs, while the 2 KB flash stores a focused acquisition and thresholding program. The 160 bytes of RAM can hold samples and a small state machine. Its two low-power stop modes are valuable when the sensor is sampled intermittently. Firmware size must remain below the 2 KB limit, and the exposed pad must be connected according to the manufacturer layout guidance.
推荐
Compact Appliance Control
The MC9S08QA2CFQE can act as the primary controller in a small appliance or household device that needs local logic without a larger application processor. Its 8-bit S08 core and 20 MHz bus speed are appropriate for button handling, status LEDs, timing, and simple actuator control. The 2 KB flash capacity suits a focused product function, while the 4 x 4 mm exposed-pad package preserves board area. Design revisions should include firmware-size monitoring and a path to a 4 KB variant if future features expand the code image.
推荐
Simple Motor-Control Node
The MC9S08QA2CFQE is appropriate for a simple motor-control node when the system requires a compact MCU for sequencing, limit sensing, and protection logic rather than a complex real-time control algorithm. Its 20 MHz bus speed can support deterministic peripheral servicing, and the 2 KB flash can hold a concise motor-control state machine. The low-voltage operation suits battery or low-voltage industrial systems. Engineers must verify timer channels, pin assignment, reset behavior, and output timing for the selected pin variant before committing the PCB.
推荐
Low-Voltage Serial Interface Product
The MC9S08QA2CFQE works in small serial-interface products that need local command handling and protocol translation without a large memory footprint. Its 2 KB flash can store a compact firmware image and 160 bytes of RAM can support buffering for a short control protocol. Operation from 1.8 V to 3.6 V allows connection to low-voltage sensors and transceivers. The design should budget memory carefully, validate interrupt latency at the 20 MHz bus speed, and follow the exposed-pad soldering and thermal-layout requirements for reliable assembly.
推荐
Portable Accessory Controller
The MC9S08QA2CFQE is well matched to portable accessories that require a low-power controller for buttons, indicators, and a simple serial link. Its 1.8 V to 3.6 V supply range supports compact portable electronics, and the QA4 family's low-power stop modes can reduce consumption between user events. The 4 x 4 mm package helps meet accessory size constraints, while 2 KB of flash is sufficient for a narrowly defined accessory function. Validate wake sources, brownout settings, and current consumption using the final power architecture and accessory workload.
推荐
Embedded Measurement and Control Module
The MC9S08QA2CFQE can serve as the local controller in a compact measurement module that sequences sensors, applies thresholds, and reports results over a serial interface. Its 20 MHz bus speed and 8-bit architecture provide adequate control bandwidth for small, deterministic measurement sequences. The 2 KB flash and 160 bytes of RAM are best suited to limited datasets and compact algorithms. Thermal performance, exposed-pad connectivity, grounding, and low-voltage behavior should be evaluated together because these factors can affect measurement repeatability near switching or power-conversion circuitry.
推荐
推荐产品汇总
工程参考数据: MC9S08QA2CFQE ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC9S08QA4CFQE | MC9S08QA1CFQE |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 8-DFN exposed pad, 4 x 4 mm | 8-DFN exposed pad, 4 x 4 mm | 8-DFN exposed pad, 4 x 4 mm |
| Flash Memory | 2 KB | 4 KB | 1 KB |
| Maximum Listed Bus Speed | 20 MHz | 20 MHz | 20 MHz |
关键差异点
- Balanced 2 KB firmware capacity for compact control programs (对比 MC9S08QA1CFQE)
- Lower memory demand than the 4 KB family option (对比 MC9S08QA4CFQE)
- Compact exposed-pad surface-mount implementation (对比 MC9S08QA1CFQE)
设计说明
Treat the exposed pad as a required package feature rather than optional copper. Follow the manufacturer land pattern, stencil recommendation, and reflow profile for the 8-DFN exposed-pad package. Confirm whether the pad is connected to ground, voltage, or another network in the exact datasheet before release. Incorrect pad assignment can prevent proper operation even when the eight perimeter pins are soldered correctly.
Budget the firmware image against the 2 KB flash limit and include margin for a bootloader, configuration constants, calibration data, and revision changes. RAM usage must also be checked because only 160 bytes is available for runtime data. Use linker map output during firmware review rather than relying on source-code size alone, and reserve a migration path to a 4 KB device if planned features increase the image.
Do not select a replacement solely because it is an 8-bit microcontroller in a similar package. Verify power pins, I/O direction, reset, clock, programming, timer, and communication assignments for each candidate. Also check flash capacity, RAM, voltage limits, interrupt behavior, and exposed-pad connectivity. A same-family device with a compatible footprint can still require firmware changes if peripheral mapping differs.
Provide adequate copper around the exposed pad while following the recommended thermal and electrical land geometry. The package is small, so local copper and via strategy influence heat spreading and assembly behavior. Avoid placing thermally or electrically sensitive analog circuitry directly beneath the pad unless the datasheet explicitly permits that arrangement. Validate junction conditions across the highest expected ambient temperature and worst-case operating mode.
合规信息
RoHS compliance is identified in the product listing. Other environmental and material compliance attributes require confirmation from the manufacturer for the exact ordering code.