最后一次采购通知: MC9S08SH8MPJ 即将停产。最后下单日期: 联系我们. 查看可用的替代料号 →
NXP Semiconductors

MC9S08SH8MPJ - 8-Bit 40MHz S08 MCU | NXP | 20-DIP

料号: MC9S08SH8MPJ ✗ 停产
3.3 V or 5 V Vdss 20-pin PDIP Package 40 MHz Speed 8 KB Memory
最小起订量: 1 |

MC9S08SH8MPJ 概述

The NXP Semiconductors MC9S08SH8MPJ is an 8-bit S08 CISC microcontroller with 8 KB of Flash memory, a 40 MHz operating frequency, 3.3 V and 5 V operation, and a 20-pin PDIP package. The part combines a compact embedded-control architecture with serial communications, analog conversion, comparison, and temperature-sensing peripherals for cost-sensitive 5 V designs.

An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, Flash program memory, data memory, and peripherals into one device. The MC9S08SH8MPJ belongs to the S08SH family, a low-end branch of the S08 product family intended for applications in the 5 V range. NXP states that the S08SH family is pin, tool, and software compatible with S08SG, which can simplify migration and reuse of development environments.

Its principal specifications include an 8-bit CISC processor, 8 KB of Flash memory, and operation up to 40 MHz. The integrated peripherals include an SCI, SPI, I²C interface, ADC, analog comparator, and temperature sensor. These resources allow the device to service sensors, perform analog measurements, communicate with external transceivers, and manage basic embedded-control functions without requiring separate interface devices.

The S08SH architecture combines the HC08 instruction set with an added BGND instruction. According to the NXP product overview, the family supports up to 32 interrupt and reset sources, providing a structured mechanism for coordinating timed activity, peripheral events, faults, and external inputs. The 40 MHz clock rate provides additional execution headroom for compact control loops and protocol-handling tasks.

Typical uses include industrial control panels, low-cost sensor nodes, serial-interface equipment, simple motor and relay controllers, temperature-monitoring systems, and small 5 V embedded products. The MCU is particularly suitable when designers want communications and analog functions integrated into a single through-hole package while retaining the established S08 development toolchain.

Designers should account for the target's end-of-life status and confirm supply availability before starting a new production design. The 20-pin PDIP package also requires a through-hole footprint and adequate spacing between adjacent components. Existing S08SH software and S08SG-compatible hardware assumptions should be checked against the final device documentation before production release.

This page consolidates lifecycle, package, memory, clock, interface, and application information into a focused engineering reference. It also distinguishes the documented S08SH characteristics from unverified replacement options and highlights the decisions required when maintaining or redesigning a legacy embedded-control product.

直接替换替代料: MC9S08SH8MPJ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

MC9S08SH8MPJ 最大额定值与电气特性

Product Type 8-bit S08 CISC microcontroller
Processor Core S08 core
最大时钟频率 40 MHz
Flash Memory 8 KB
Flash Organization 8K x 8 bits
电源电压 3.3 V or 5 V
封装 20-pin PDIP
安装类型 Through-hole
Package Pitch 7.62 mm
Series Compatibility Pin, tool, and software compatible with S08SG
Serial Communications Interface 1 SCI
Serial Peripheral Interface 1 SPI
Inter-Integrated Circuit Interface I²C
Analog-to-Digital Converter Integrated ADC
Analog Comparator Integrated analog comparator
Temperature Sensor Integrated temperature sensor
Interrupt and Reset Sources Up to 32 sources
Shipping Format Tube
生命周期状态 End of Life

MC9S08SH8MPJ 7.62 mm 引脚配置指南

MC9S08SH8MPJ(7.62 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

MC9S08SH8MPJ 的 7.62 mm 封装引脚图

暂无详细引脚数据: MC9S08SH8MPJ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MC9S08SH8MPJ 适用于 6 应用s: Industrial Control Panels, Serial Sensor Nodes, Temperature Monitoring Equipment, Motor and Relay Controllers, 5 V Embedded Products, Legacy Equipment Maintenance.

🏭

Industrial Control Panels

The MC9S08SH8MPJ is suitable for small industrial control panels that combine local sensing, operator interaction, and serial supervision. Its S08 core operates at up to 40 MHz and provides 8 KB of Flash for control code, while the integrated SCI can connect the controller to a host, display module, or service interface. The ADC and analog comparator support physical-input conditioning, and the temperature sensor can provide local thermal information. Because the device is supplied in a 20-pin PDIP package, it is particularly practical for through-hole control boards assembled in relatively modest volumes. Developers should reserve the available pins according to the manufacturer pin table and confirm whether the 8 KB memory limit accommodates the complete control application.

🧩

Serial Sensor Nodes

The MC9S08SH8MPJ can form the core of a compact serial sensor node that gathers analog measurements and forwards status through a wired communication link. The integrated ADC handles analog sensor inputs, the analog comparator supports threshold-based events, and the temperature sensor adds an internal measurement without requiring a separate sensor. SCI and SPI peripherals allow the node to support different external devices, while I²C is useful for lower-speed bus-connected components. Operating at up to 40 MHz gives the firmware headroom for filtering, calibration, and packet handling, although the 8 KB Flash capacity must be checked against the complete image. A 5 V supply domain also simplifies integration with legacy sensors and industrial wiring.

🌡️

Temperature Monitoring Equipment

The integrated temperature sensor and analog measurement resources make the MC9S08SH8MPJ appropriate for temperature-monitoring equipment that combines local sensing with remote reporting. The MCU can sample its internal temperature sensor and external analog probes, apply filtering or thresholds in firmware, and use the SCI or I²C interface to relay measurements. The analog comparator provides a hardware threshold function for alarm or fan-control signals, while the 8-bit S08 core handles configuration, status logic, and communications. Its 40 MHz maximum clock frequency supports responsive control behavior without requiring a higher-power processor class. The 20-pin PDIP format is useful where through-hole assembly, serviceability, and larger temperature-dependent component spacing are priorities.

🔧

Motor and Relay Controllers

The MC9S08SH8MPJ can serve as the sequencing controller in compact motor, solenoid, or relay-control products. Its fast S08 core executes up to 40 MHz, allowing control tasks and communication handling to share one processor, while the SCI and SPI interfaces support external drivers or supervisory electronics. ADC inputs can monitor current or position-related analog signals, and the analog comparator can detect thresholds without continuous software polling. The MCU itself does not directly power high-energy loads, so transistor, MOSFET, flyback, and protection components must be selected separately. Because the target has 8 KB of Flash, confirm that the final timing, diagnostics, and communications firmware fit within the memory budget before layout release.

⚡

5 V Embedded Products

The MC9S08SH8MPJ targets compact embedded products operating in a 5 V range, combining an 8-bit S08 processor with Flash memory and mixed analog and serial peripherals. This integration can reduce the number of discrete components in products requiring local logic, sensor acquisition, and communication. The 40 MHz operating rate provides execution margin for control algorithms, while the 8 KB Flash capacity remains suitable for relatively compact firmware. Its support for both 3.3 V and 5 V operation can simplify mixed-voltage product architecture, but individual peripheral pins still require careful voltage-level review. The 20-pin PDIP package is advantageous for prototypes and through-hole production, while a redesign may favor a smaller surface-mount package if long-term availability is not a constraint.

🖥️

Legacy Equipment Maintenance

The MC9S08SH8MPJ is especially relevant to maintenance and continuation programs for installed equipment built around the S08SH family. NXP identifies the S08SH family as pin, tool, and software compatible with S08SG, allowing a maintenance engineer to preserve software workflows and understand migration options when an exact same-MPN supply is constrained. The target retains the 8 KB Flash, 40 MHz S08 core, SCI, SPI, I²C, ADC, comparator, and temperature-sensor resources described for the family. Because the device is End of Life, engineers should preserve the original package footprint, verify all 20 pin assignments, and validate the replacement source before modifying qualified production equipment.

What is the MC9S08SH8MPJ?
The MC9S08SH8MPJ is an 8-bit NXP S08 microcontroller operating at up to 40 MHz with 8 KB of Flash memory. According to the NXP product overview, it supports 3.3 V and 5 V operation and integrates SCI, SPI, I²C, an ADC, an analog comparator, and a temperature sensor. The device is packaged in a 20-pin PDIP and is identified by NXP as End of Life.
What are the key specifications of MC9S08SH8MPJ that engineers should know?
The key MC9S08SH8MPJ specifications are an 8-bit S08 CISC core, 40 MHz maximum clock frequency, 8 KB of 8K x 8 Flash memory, and a 20-pin PDIP package. NXP also identifies SCI, SPI, I²C, ADC, analog-comparator, and temperature-sensor functions. The S08SH family supports up to 32 interrupt and reset sources and is compatible with S08SG tools and software.
Where can I download the MC9S08SH8MPJ datasheet?
The official MC9S08SH8MPJ datasheet and product documents are linked from the NXP product page at https://www.nxp.com/part/MC9S08SH8MPJ. The page provides the authoritative Data Sheet, product status, shipping information, and discontinuance details. Use the manufacturer document for final pin assignments, electrical limits, memory maps, timing values, and programming information.
Where can I find the MC9S08SH8MPJ pinout?
The MC9S08SH8MPJ pinout is assigned across a 20-pin PDIP package, but a complete manufacturer pin table is not reproduced on this page. Use the pin-description table in the NXP datasheet linked from the official product page before assigning PCB tracks or connecting peripherals. The package drawing confirms a 20-pin through-hole format with 7.62 mm pitch.
Is the MC9S08SH8MPJ active or end of life?
The MC9S08SH8MPJ is marked End of Life by NXP on the official product page. Existing equipment can remain supported while suitable supply is available, but new designs should account for lifecycle risk and validate any proposed continuation before committing to production. Check the current manufacturer shipping and discontinuance information for the applicable date.
Where can I buy MC9S08SH8MPJ online?
MC9S08SH8MPJ sourcing should be handled through the Request a Quote form on this page, where the exact suffix, package, quantity, and current lead time can be requested together. The part is identified as a 20-pin PDIP device with an 8 KB Flash configuration. Confirm that the quoted material matches MC9S08SH8MPJ and includes the required tube packing format.
What is the price of MC9S08SH8MPJ?
The current MC9S08SH8MPJ price is not stated as a static figure on this page because commercial terms can change with quantity, lifecycle, and supply status. Use the Request a Quote form on this page for a current quotation. The request should identify the exact MC9S08SH8MPJ MPN, 20-pin PDIP package, and required quantity before an order is placed.
What is the lead time for MC9S08SH8MPJ?
MC9S08SH8MPJ lead time must be confirmed for the requested quantity because the manufacturer identifies the device as End of Life and market availability can vary. Submit the quantity and tube packing requirement through the Request a Quote form on this page. The resulting confirmation should also state any lifecycle, lot, or traceability conditions.
Is MC9S08SH8MPJ in stock?
MC9S08SH8MPJ availability should be confirmed through the Request a Quote form on this page rather than inferred from a listing. One market reference showed inventory of 15,810 pieces, but that observation does not guarantee current stock or a deliverable allocation. Provide the required quantity and packaging preference to obtain a current response.
What can replace MC9S08SH8MPJ?
No verified drop-in replacement for MC9S08SH8MPJ is identified by the available cross-reference results. The target uses an 8-bit S08 core, 8 KB Flash, a 40 MHz clock, mixed 3.3 V and 5 V operation, and a 20-pin PDIP package, so a compatible replacement must satisfy all of those constraints. Submit the required MPN for engineering review rather than treating a merely similar MCU as interchangeable.
Is MC9S08SH8MPJ the same as MC9S08SH4CPJ?
The MC9S08SH8MPJ should not be treated as interchangeable with MC9S08SH4CPJ without a full pin and memory comparison. The target has 8 KB of Flash, a 40 MHz maximum clock, and a 20-pin PDIP package, while the comparison result identifies MC9S08SH4CPJ as a different member of the family. Check package pins, Flash capacity, voltage, clock, and peripherals in the manufacturer datasheets.
When should I choose MC9S08SH8MPJ over an S08SG device?
Choose MC9S08SH8MPJ when maintaining an existing S08SH design requires its 20-pin PDIP footprint, 8 KB Flash configuration, and established S08 toolchain. Choose an S08SG device for a new design when its available package and resources offer a better fit. NXP states that the S08SH family is pin, tool, and software compatible with S08SG, but final device-level requirements still govern the choice.
Is MC9S08SH8MPJ suitable for 5 V embedded-control products?
The MC9S08SH8MPJ is suitable for compact 5 V embedded-control products because it supports 3.3 V and 5 V operation, runs the S08 core at up to 40 MHz, and integrates communications and analog peripherals. The 8 KB Flash capacity should be checked against application-code size. Its 20-pin PDIP package favors through-hole assemblies rather than compact surface-mount production.
How do I compare MC9S08SH8MPJ with a competitor equivalent?
A valid comparison of MC9S08SH8MPJ with a competitor must check package pins, supply voltage, Flash memory, clock rate, RAM, peripheral mapping, interrupt behavior, and programming compatibility. No cross-brand equivalent in the cross-reference results establishes all of those requirements. Treat generic cross-reference suggestions as candidates for evaluation, not as drop-in replacements.
What peripherals are integrated into the MC9S08SH8MPJ?
The MC9S08SH8MPJ integrates an SCI, SPI, I²C interface, ADC, analog comparator, and temperature sensor. According to the NXP product overview, the S08 family also supports up to 32 interrupt and reset sources and adds the BGND instruction to the HC08 instruction set. These resources support serial networking, analog measurement, and basic environmental sensing in a single 8-bit controller.

工程参考数据: MC9S08SH8MPJ ——对比、设计指导和合规信息。

选型指南

Choose MC9S08SH8MPJ when maintaining an established S08SH design that specifically requires the 20-pin PDIP footprint, 8 KB Flash, up to 40 MHz operation, and the integrated SCI, SPI, I²C, ADC, comparator, and temperature-sensor resources. Its End-of-Life status makes early sourcing and lifecycle planning essential, but it remains appropriate for qualified maintenance when supply and traceability can be confirmed. MC9S08SH4CPJ is a different family member with different capacity and package attributes, while MC9S08SH16MTJ provides a different Flash capacity and therefore is not a straightforward replacement. MC9S08SH8MTG is also a distinct package variant. For a new design, evaluate current S08SG options when their package, memory, voltage, peripherals, and software requirements satisfy the product specification. Do not use generic cross-reference results as proof of drop-in compatibility; verify the 20-pin assignment and operating limits directly.

与替代料对比

参数 本产品
Brand NXP Semiconductors
Package 20-pin PDIP
Mounting Type Through-hole
Processor Core 8-bit S08 CISC
Maximum Clock Frequency 40 MHz
Flash Memory 8 KB (8K x 8)
Supply Voltage 3.3 V or 5 V
Serial Interfaces SCI, SPI, and I²C
Analog Resources ADC, analog comparator, and temperature sensor
Lifecycle Status End of Life

关键差异点

  • Integrated mixed analog and serial peripherals (对比 MC9S08SH4CPJ)
  • 20-pin PDIP construction (对比 MC9S08SH8MTG)
  • S08 family compatibility path (对比 MC9S08SH16MTJ)

设计说明

Do not substitute the MCU based only on the S08 family name or an approximate frequency match. A valid replacement must preserve the 20-pin PDIP footprint, 8 KB Flash configuration, supply-voltage requirements, peripheral assignments, interrupt behavior, and programming model. Confirm the complete pin-description table and electrical limits in the manufacturer documentation before approving any substitution or cross-family migration.

The 20-pin PDIP package has a 7.62 mm lead pitch and requires a through-hole footprint. Preserve adequate spacing around the IC for soldering, inspection, and cleaning while keeping analog, serial, and power traces logically separated. Use a stable ground plane, route sensitive analog inputs away from switching nodes, and place input bypassing close to the supply pins according to the manufacturer layout guidance.

The MCU supports 3.3 V and 5 V operation, but the allowable voltage at every supply and signal pin must still be checked against the final operating condition. Do not assume that every peripheral can tolerate 5 V when the core or interface is operated from 3.3 V. Add appropriate level translation for mixed-voltage sensors and communication peripherals, and confirm decoupling values from the manufacturer datasheet.

Plan the PCB around the fact that the target is a legacy End-of-Life 20-pin through-hole MCU. Verify that the selected replacement has identical pin numbering, exposed functions, and board orientation before committing a new layout. If moving to a surface-mount package, treat it as a redesign rather than a drop-in change because footprint, assembly process, thermal performance, and possibly peripheral mapping will differ.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are present in the cited manufacturer information. A third-party comparison mentions RoHS and REACH for compared parts, but that result is not treated as an authoritative declaration for MC9S08SH8MPJ.

相关搜索

MC9S08SH8MPJ datasheet MC9S08SH8MPJ datasheet pdf MC9S08SH8MPJ pinout MC9S08SH8MPJ equivalent MC9S08SH8MPJ replacement MC9S08SH8MPJ cross reference NXP MC9S08SH8MPJ MC9S08SH8MPJ 40MHz 8KB MC9S08SH8MPJ 20-DIP pinout MC9S08SH8MPJ application circuit MC9S08SH8MPJ price MC9S08SH8MPJ stock MC9S08SH8MPJ vs MC9S08SH4CPJ MC9S08SH8MPJ vs MC9S08SH8MTG

相关元器件 & 术语

NXP Semiconductors MC9S08SH8MPJ MC9S08SH4CPJ MC9S08SH8MTG MC9S08SH16MTJ S08 S08SH S08SG HC08 instruction set BGND instruction 8-bit microcontroller CISC Flash memory Serial Communications Interface Serial Peripheral Interface I²C analog-to-digital converter analog comparator temperature sensor 20-pin PDIP through-hole package SCI SPI 40 MHz End of Life
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情