MC9S08SH8MPJ - 8-Bit 40MHz S08 MCU | NXP | 20-DIP
부품 번호: MC9S08SH8MPJ ✗ 단종MC9S08SH8MPJ 개요
An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, Flash program memory, data memory, and peripherals into one device. The MC9S08SH8MPJ belongs to the S08SH family, a low-end branch of the S08 product family intended for applications in the 5 V range. NXP states that the S08SH family is pin, tool, and software compatible with S08SG, which can simplify migration and reuse of development environments.
Its principal specifications include an 8-bit CISC processor, 8 KB of Flash memory, and operation up to 40 MHz. The integrated peripherals include an SCI, SPI, I²C interface, ADC, analog comparator, and temperature sensor. These resources allow the device to service sensors, perform analog measurements, communicate with external transceivers, and manage basic embedded-control functions without requiring separate interface devices.
The S08SH architecture combines the HC08 instruction set with an added BGND instruction. According to the NXP product overview, the family supports up to 32 interrupt and reset sources, providing a structured mechanism for coordinating timed activity, peripheral events, faults, and external inputs. The 40 MHz clock rate provides additional execution headroom for compact control loops and protocol-handling tasks.
Typical uses include industrial control panels, low-cost sensor nodes, serial-interface equipment, simple motor and relay controllers, temperature-monitoring systems, and small 5 V embedded products. The MCU is particularly suitable when designers want communications and analog functions integrated into a single through-hole package while retaining the established S08 development toolchain.
Designers should account for the target's end-of-life status and confirm supply availability before starting a new production design. The 20-pin PDIP package also requires a through-hole footprint and adequate spacing between adjacent components. Existing S08SH software and S08SG-compatible hardware assumptions should be checked against the final device documentation before production release.
This page consolidates lifecycle, package, memory, clock, interface, and application information into a focused engineering reference. It also distinguishes the documented S08SH characteristics from unverified replacement options and highlights the decisions required when maintaining or redesigning a legacy embedded-control product.
드롭인 대체품: MC9S08SH8MPJ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청MC9S08SH8MPJ 최대 정격 & 전기적 특성
| Product Type | 8-bit S08 CISC microcontroller |
| Processor Core | S08 core |
| 최대 클록 주파수 | 40 MHz |
| Flash Memory | 8 KB |
| Flash Organization | 8K x 8 bits |
| 공급 전압 | 3.3 V or 5 V |
| 패키지 | 20-pin PDIP |
| 실장 유형 | Through-hole |
| Package Pitch | 7.62 mm |
| Series Compatibility | Pin, tool, and software compatible with S08SG |
| Serial Communications Interface | 1 SCI |
| Serial Peripheral Interface | 1 SPI |
| Inter-Integrated Circuit Interface | I²C |
| Analog-to-Digital Converter | Integrated ADC |
| Analog Comparator | Integrated analog comparator |
| Temperature Sensor | Integrated temperature sensor |
| Interrupt and Reset Sources | Up to 32 sources |
| Shipping Format | Tube |
| 수명 주기 상태 | End of Life |
MC9S08SH8MPJ 7.62 mm 핀 구성 가이드
MC9S08SH8MPJ(7.62 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S08SH8MPJ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S08SH8MPJ 적합 용도: 6 애플리케이션s: Industrial Control Panels, Serial Sensor Nodes, Temperature Monitoring Equipment, Motor and Relay Controllers, 5 V Embedded Products, Legacy Equipment Maintenance.
Industrial Control Panels
The MC9S08SH8MPJ is suitable for small industrial control panels that combine local sensing, operator interaction, and serial supervision. Its S08 core operates at up to 40 MHz and provides 8 KB of Flash for control code, while the integrated SCI can connect the controller to a host, display module, or service interface. The ADC and analog comparator support physical-input conditioning, and the temperature sensor can provide local thermal information. Because the device is supplied in a 20-pin PDIP package, it is particularly practical for through-hole control boards assembled in relatively modest volumes. Developers should reserve the available pins according to the manufacturer pin table and confirm whether the 8 KB memory limit accommodates the complete control application.
Serial Sensor Nodes
The MC9S08SH8MPJ can form the core of a compact serial sensor node that gathers analog measurements and forwards status through a wired communication link. The integrated ADC handles analog sensor inputs, the analog comparator supports threshold-based events, and the temperature sensor adds an internal measurement without requiring a separate sensor. SCI and SPI peripherals allow the node to support different external devices, while I²C is useful for lower-speed bus-connected components. Operating at up to 40 MHz gives the firmware headroom for filtering, calibration, and packet handling, although the 8 KB Flash capacity must be checked against the complete image. A 5 V supply domain also simplifies integration with legacy sensors and industrial wiring.
Temperature Monitoring Equipment
The integrated temperature sensor and analog measurement resources make the MC9S08SH8MPJ appropriate for temperature-monitoring equipment that combines local sensing with remote reporting. The MCU can sample its internal temperature sensor and external analog probes, apply filtering or thresholds in firmware, and use the SCI or I²C interface to relay measurements. The analog comparator provides a hardware threshold function for alarm or fan-control signals, while the 8-bit S08 core handles configuration, status logic, and communications. Its 40 MHz maximum clock frequency supports responsive control behavior without requiring a higher-power processor class. The 20-pin PDIP format is useful where through-hole assembly, serviceability, and larger temperature-dependent component spacing are priorities.
Motor and Relay Controllers
The MC9S08SH8MPJ can serve as the sequencing controller in compact motor, solenoid, or relay-control products. Its fast S08 core executes up to 40 MHz, allowing control tasks and communication handling to share one processor, while the SCI and SPI interfaces support external drivers or supervisory electronics. ADC inputs can monitor current or position-related analog signals, and the analog comparator can detect thresholds without continuous software polling. The MCU itself does not directly power high-energy loads, so transistor, MOSFET, flyback, and protection components must be selected separately. Because the target has 8 KB of Flash, confirm that the final timing, diagnostics, and communications firmware fit within the memory budget before layout release.
5 V Embedded Products
The MC9S08SH8MPJ targets compact embedded products operating in a 5 V range, combining an 8-bit S08 processor with Flash memory and mixed analog and serial peripherals. This integration can reduce the number of discrete components in products requiring local logic, sensor acquisition, and communication. The 40 MHz operating rate provides execution margin for control algorithms, while the 8 KB Flash capacity remains suitable for relatively compact firmware. Its support for both 3.3 V and 5 V operation can simplify mixed-voltage product architecture, but individual peripheral pins still require careful voltage-level review. The 20-pin PDIP package is advantageous for prototypes and through-hole production, while a redesign may favor a smaller surface-mount package if long-term availability is not a constraint.
Legacy Equipment Maintenance
The MC9S08SH8MPJ is especially relevant to maintenance and continuation programs for installed equipment built around the S08SH family. NXP identifies the S08SH family as pin, tool, and software compatible with S08SG, allowing a maintenance engineer to preserve software workflows and understand migration options when an exact same-MPN supply is constrained. The target retains the 8 KB Flash, 40 MHz S08 core, SCI, SPI, I²C, ADC, comparator, and temperature-sensor resources described for the family. Because the device is End of Life, engineers should preserve the original package footprint, verify all 20 pin assignments, and validate the replacement source before modifying qualified production equipment.
엔지니어링 참조 데이터: MC9S08SH8MPJ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | NXP Semiconductors |
| Package | 20-pin PDIP |
| Mounting Type | Through-hole |
| Processor Core | 8-bit S08 CISC |
| Maximum Clock Frequency | 40 MHz |
| Flash Memory | 8 KB (8K x 8) |
| Supply Voltage | 3.3 V or 5 V |
| Serial Interfaces | SCI, SPI, and I²C |
| Analog Resources | ADC, analog comparator, and temperature sensor |
| Lifecycle Status | End of Life |
주요 차별점
- Integrated mixed analog and serial peripherals (vs MC9S08SH4CPJ)
- 20-pin PDIP construction (vs MC9S08SH8MTG)
- S08 family compatibility path (vs MC9S08SH16MTJ)
설계 노트
Do not substitute the MCU based only on the S08 family name or an approximate frequency match. A valid replacement must preserve the 20-pin PDIP footprint, 8 KB Flash configuration, supply-voltage requirements, peripheral assignments, interrupt behavior, and programming model. Confirm the complete pin-description table and electrical limits in the manufacturer documentation before approving any substitution or cross-family migration.
The 20-pin PDIP package has a 7.62 mm lead pitch and requires a through-hole footprint. Preserve adequate spacing around the IC for soldering, inspection, and cleaning while keeping analog, serial, and power traces logically separated. Use a stable ground plane, route sensitive analog inputs away from switching nodes, and place input bypassing close to the supply pins according to the manufacturer layout guidance.
The MCU supports 3.3 V and 5 V operation, but the allowable voltage at every supply and signal pin must still be checked against the final operating condition. Do not assume that every peripheral can tolerate 5 V when the core or interface is operated from 3.3 V. Add appropriate level translation for mixed-voltage sensors and communication peripherals, and confirm decoupling values from the manufacturer datasheet.
Plan the PCB around the fact that the target is a legacy End-of-Life 20-pin through-hole MCU. Verify that the selected replacement has identical pin numbering, exposed functions, and board orientation before committing a new layout. If moving to a surface-mount package, treat it as a redesign rather than a drop-in change because footprint, assembly process, thermal performance, and possibly peripheral mapping will differ.
규정 준수 정보
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are present in the cited manufacturer information. A third-party comparison mentions RoHS and REACH for compared parts, but that result is not treated as an authoritative declaration for MC9S08SH8MPJ.