MC9S12XDP512VAL - 16-bit 80MHz HCS12X MCU 512KB Flash | NXP
料号： MC9S12XDP512VAL ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.2 | $162.00 |
| 100 | $13.95 | $1,395.00 |
| 500 | $12.4 | $6,200.00 |
| 1,000 | $11.1 | $11,100.00 |
MC9S12XDP512VAL 概述
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals such as timers, ADC, communication controllers, and GPIO. The HCS12X architecture extends the HCS12 core with an enhanced indexed addressing mode, a hardware instruction queue, and an extended instruction set while remaining object-code compatible with legacy HCS12 code, easing migration of existing automotive platforms.
Key features of the MC9S12XDP512VAL include 512 KB Flash organised as 512K x 8 with EEPROM emulation capability, an XGATE co-processor for offloading interrupt-driven peripheral servicing, multiple CAN 2.0A/B modules for in-vehicle networking, an 8/10/12-bit ATD (Analog-to-Digital) converter, and an enhanced capture timer. The wide 2.35 V to 2.75 V single-supply range (with 5 V-tolerant I/O on selected pins) simplifies integration with both 3.3 V and 5 V analog signal chains.
The HCS12X core delivers up to 80 MHz bus operation, instruction queueing, and a separate XGATE auxiliary core that handles interrupt-driven peripheral tasks with deterministic latency. The peripheral set includes multiple MSCAN modules, SPI, SCI/UART, IIC, PWM, timers and an 8-channel ATD, allowing designers to consolidate several discrete controllers into a single chip.
Typical applications include automotive body control modules, chassis controllers, gateway ECUs, CAN-based multiplexing networks, and industrial CAN-FD bridge nodes. Designers frequently choose this part for ECU upgrades where 16-bit code compatibility and large Flash headroom are both required.
When designing with this device, ensure the integrated voltage regulator and external decoupling match the 2.5 V core rail requirements and that unused CAN pins are tied to defined logic levels to avoid bus-dominant faults. The 112-pin LQFP also requires careful PCB layout for the exposed thermal pad to dissipate peak current bursts from CAN drivers.
This page synthesises distributor pricing, parametric drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers rapidly qualify the MC9S12XDP512VAL for both new designs and legacy platform refresh.
直接替换替代料： MC9S12XDP512VAL ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MC9S12XDP512VAL （相同外形与封装尺寸） ——差异在于 Package, Operating Temperature, Supply Voltage, ADC, Core Architecture.
快速对比工具——选择替代料号进行并排对比：
MC9S12XDT512MAL
✅ 直接替换✓ 有现货
$14.2 / 个
查看数据手册 →MC9S12XDT512CAL
✅ 直接替换📋 参考替代料（不在目录中）
MC9S12XDP512CAL
✅ 直接替换📋 参考替代料（不在目录中）
MC9S12XDP512MAL
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$16.4 / 个
查看数据手册 →MC9S12XEQ384CAG
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →S912XET512BMAGR
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$6.6 / 个
查看数据手册 →S912XET512J2VAGR
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$1 / 个
查看数据手册 →MC9S12XDP512VAL 最大额定值与电气特性
| Core Processor | HCS12X |
| Core Architecture | 16-bit CISC |
| Maximum CPU Frequency | 80 MHz |
| Program Memory Size | 512 KB (512K x 8) Flash |
| 电源电压 | 2.35 V to 2.75 V |
| I/O Pins | 119 |
| Package Type | 112-pin LQFP (20 x 20 mm) |
| 安装类型 | Surface Mount |
| CAN Modules | Multiple MSCAN (CAN 2.0A/B) |
| ADC | 8/10-bit ATD (S12ATD10B8CV3) |
| Co-processor | XGATE |
| Instruction Set Compatibility | Upward-compatible with HCS12 |
| ROM Type | Flash |
| 生命周期状态 | Active |
MC9S12XDP512VAL 引脚配置
| 引脚 1 | BKGD — Background/Mode pin for debug and flash programming |
| 引脚 2 | VDDR — Regulator power supply (external pass-device drive) |
| 引脚 3 | VDD — 2.5V core supply (output of internal regulator) |
| 引脚 4 | VSS — Digital ground |
| 引脚 5 | VDDA — Analog supply for ATD module |
| 引脚 6 | VSSA — Analog ground |
| 引脚 7 | ATD0 — Analog-to-Digital converter channel 0 |
| 引脚 8 | ATD1 — Analog-to-Digital converter channel 1 |
| 引脚 9 | ATD2 — Analog-to-Digital converter channel 2 |
| 引脚 10 | ATD3 — Analog-to-Digital converter channel 3 |
| 引脚 11 | ATD4 — Analog-to-Digital converter channel 4 |
| 引脚 12 | ATD5 — Analog-to-Digital converter channel 5 |
| 引脚 13 | ATD6 — Analog-to-Digital converter channel 6 |
| 引脚 14 | ATD7 — Analog-to-Digital converter channel 7 |
| 引脚 15 | VRH — ATD high reference voltage |
| 引脚 16 | VRL — ATD low reference voltage |
| 引脚 17 | XTAL — Crystal oscillator input |
| 引脚 18 | EXTAL — Crystal oscillator output / external clock input |
| 引脚 19 | RESET — Active-low external reset (bidirectional) |
| 引脚 20 | TEST — Test mode pin (tie to VSS in normal operation) |
| 引脚 21 | PAD0 — Port AD bit 0 / ETRIG0 / PWM |
| 引脚 22 | PAD1 — Port AD bit 1 |
| 引脚 23 | PAD2 — Port AD bit 2 |
| 引脚 24 | PAD3 — Port AD bit 3 |
| 引脚 25 | PAD4 — Port AD bit 4 |
| 引脚 26 | PAD5 — Port AD bit 5 |
| 引脚 27 | PAD6 — Port AD bit 6 |
| 引脚 28 | PAD7 — Port AD bit 7 |
| 引脚 29 | PA0 — Port A bit 0 / TIM channel |
| 引脚 30 | PA1 — Port A bit 1 / TIM channel |
| 引脚 31 | PA2 — Port A bit 2 / TIM channel |
| 引脚 32 | PA3 — Port A bit 3 / TIM channel |
| 引脚 33 | PA4 — Port A bit 4 / TIM channel |
| 引脚 34 | PA5 — Port A bit 5 / TIM channel |
| 引脚 35 | PA6 — Port A bit 6 / TIM channel |
| 引脚 36 | PA7 — Port A bit 7 / TIM channel |
| 引脚 37 | PB0 — Port B bit 0 / PWM |
| 引脚 38 | PB1 — Port B bit 1 / PWM |
| 引脚 39 | PB2 — Port B bit 2 / PWM |
| 引脚 40 | PB3 — Port B bit 3 / PWM |
| 引脚 41 | PB4 — Port B bit 4 / PWM |
| 引脚 42 | PB5 — Port B bit 5 / PWM |
| 引脚 43 | PB6 — Port B bit 6 / PWM |
| 引脚 44 | PB7 — Port B bit 7 / PWM |
| 引脚 45 | PE0 — Port E bit 0 / XIRQ |
| 引脚 46 | PE1 — Port E bit 1 / IRQ |
| 引脚 47 | PE2 — Port E bit 2 |
| 引脚 48 | PE3 — Port E bit 3 |
| 引脚 49 | PE4 — Port E bit 4 |
| 引脚 50 | PE5 — Port E bit 5 |
| 引脚 51 | PE6 — Port E bit 6 |
| 引脚 52 | PE7 — Port E bit 7 |
| 引脚 53 | PH0 — Port H bit 0 / CAN0 TX |
| 引脚 54 | PH1 — Port H bit 1 / CAN0 RX |
| 引脚 55 | PH2 — Port H bit 2 / CAN1 TX |
| 引脚 56 | PH3 — Port H bit 3 / CAN1 RX |
| 引脚 57 | PH4 — Port H bit 4 / CAN2 TX |
| 引脚 58 | PH5 — Port H bit 5 / CAN2 RX |
| 引脚 59 | PH6 — Port H bit 6 / CAN3 TX |
| 引脚 60 | PH7 — Port H bit 7 / CAN3 RX |
| 引脚 61 | PJ0 — Port J bit 0 / SCL |
| 引脚 62 | PJ1 — Port J bit 1 / SDA |
| 引脚 63 | PJ2 — Port J bit 2 |
| 引脚 64 | PJ3 — Port J bit 3 |
| 引脚 65 | PJ4 — Port J bit 4 |
| 引脚 66 | PJ5 — Port J bit 5 |
| 引脚 67 | PJ6 — Port J bit 6 |
| 引脚 68 | PJ7 — Port J bit 7 |
| 引脚 69 | PK0 — Port K bit 0 / SPI SCK |
| 引脚 70 | PK1 — Port K bit 1 / SPI MOSI |
| 引脚 71 | PK2 — Port K bit 2 / SPI MISO |
| 引脚 72 | PK3 — Port K bit 3 / SPI SS |
| 引脚 73 | PK4 — Port K bit 4 / SCI TX |
| 引脚 74 | PK5 — Port K bit 5 / SCI RX |
| 引脚 75 | PP0 — Port P bit 0 / PWM |
| 引脚 76 | PP1 — Port P bit 1 / PWM |
| 引脚 77 | PP2 — Port P bit 2 / PWM |
| 引脚 78 | PP3 — Port P bit 3 / PWM |
| 引脚 79 | PP4 — Port P bit 4 / PWM |
| 引脚 80 | PP5 — Port P bit 5 / PWM |
| 引脚 81 | PP6 — Port P bit 6 / PWM |
| 引脚 82 | PP7 — Port P bit 7 / PWM |
| 引脚 83 | PS0 — Port S bit 0 / SCI1 TX |
| 引脚 84 | PS1 — Port S bit 1 / SCI1 RX |
| 引脚 85 | PS2 — Port S bit 2 / SPI1 SCK |
| 引脚 86 | PS3 — Port S bit 3 / SPI1 MOSI |
| 引脚 87 | PS4 — Port S bit 4 / SPI1 MISO |
| 引脚 88 | PS5 — Port S bit 5 / SPI1 SS |
| 引脚 89 | PT0 — Port T bit 0 / IOC0 |
| 引脚 90 | PT1 — Port T bit 1 / IOC1 |
| 引脚 91 | PT2 — Port T bit 2 / IOC2 |
| 引脚 92 | PT3 — Port T bit 3 / IOC3 |
| 引脚 93 | PT4 — Port T bit 4 / IOC4 |
| 引脚 94 | PT5 — Port T bit 5 / IOC5 |
| 引脚 95 | PT6 — Port T bit 6 / IOC6 |
| 引脚 96 | PT7 — Port T bit 7 / IOC7 |
| 引脚 97 | PU0 — Port U bit 0 |
| 引脚 98 | PU1 — Port U bit 1 |
| 引脚 99 | PU2 — Port U bit 2 |
| 引脚 100 | PU3 — Port U bit 3 |
| 引脚 101 | PU4 — Port U bit 4 |
| 引脚 102 | PU5 — Port U bit 5 |
| 引脚 103 | PU6 — Port U bit 6 |
| 引脚 104 | PU7 — Port U bit 7 |
| 引脚 105 | VDDX0 — I/O supply segment 0 |
| 引脚 106 | VSSX0 — I/O ground segment 0 |
| 引脚 107 | VDDX1 — I/O supply segment 1 |
| 引脚 108 | VSSX1 — I/O ground segment 1 |
| 引脚 109 | VDDX2 — I/O supply segment 2 |
| 引脚 110 | VSSX2 — I/O ground segment 2 |
| 引脚 111 | VDDX3 — I/O supply segment 3 |
| 引脚 112 | VSSX3 — I/O ground segment 3 |
典型应用
MC9S12XDP512VAL 适用于 7 应用s: Automotive Body Control Module (BCM), CAN Gateway / Network Bridge ECU, Chassis and Powertrain Auxiliary Controller, Industrial CAN-Open Master Node, Automotive Instrument Cluster Auxiliary MCU, CAN-Based Diagnostic and Reprogramming Tool, Battery Management Slave Controller.
Automotive Body Control Module (BCM)
The MC9S12XDP512VAL is a natural fit for body control modules because it combines the 80 MHz HCS12X core with multiple MSCAN 2.0A/B controllers, 119 GPIO and 512 KB Flash - large enough to hold BCM application firmware plus diagnostics. Its XGATE co-processor offloads CAN message filtering and PWM timing, freeing the main CPU to run the body-control state machine. The 2.35 V to 2.75 V supply matches the typical 12 V battery rail after regulator down-conversion.
推荐
CAN Gateway / Network Bridge ECU
With dual MSCAN modules and 512 KB Flash, the MC9S12XDP512VAL serves as a CAN-to-CAN or CAN-to-LIN gateway in vehicle network architectures. The XGATE engine handles low-level CAN frame forwarding with deterministic latency while the HCS12X core runs routing tables, network management, and diagnostics (UDS/KWP2000). Its 112-pin LQFP package exposes enough GPIO to support status LEDs, wake inputs, and multiple bus enable signals without an external I/O expander.
推荐
Chassis and Powertrain Auxiliary Controller
The 80 MHz HCS12X core, XGATE data-movement engine, and 8/10-bit ATD converter make the MC9S12XDP512VAL suitable for chassis controllers such as electric power steering (EPS) auxiliaries, suspension modules, and transmission solenoids. The 119 GPIO can drive H-bridge pre-drivers, read wheel-speed sensors through the enhanced capture timer, and sample hydraulic pressure via the ATD - all on one chip. The 512 KB Flash allows in-field firmware updates over CAN calibration protocol (CCP).
推荐
Industrial CAN-Open Master Node
Industrial automation controllers based on CANopen (CiA 401/402/404) benefit from the MC9S12XDP512VAL's combination of 512 KB Flash for protocol stacks and the XGATE engine for deterministic PDO handling. The 112-pin LQFP, 80 MHz core, and 2.5 V supply allow compact DIN-rail modules that drive 24 V industrial bus nodes through external transceivers. The same HCS12 instruction set allows code reuse from existing S12 industrial platforms.
推荐
Automotive Instrument Cluster Auxiliary MCU
In distributed instrument clusters, the MC9S12XDP512VAL drives stepper-motor gauges, LED matrix backlights, and CAN diagnostics while the main HCS12X core animates tell-tales and processes vehicle bus messages. The 119 GPIO and multiple PWM channels are sufficient to drive multiple air-core gauges directly, while the 512 KB Flash supports full UDS bootloader and customer-specific graphics scripts.
推荐
CAN-Based Diagnostic and Reprogramming Tool
Automotive diagnostic tools (service bay programmers, end-of-line testers, fleet telematics) use the MC9S12XDP512VAL as a CAN-FD-ready MCU with 512 KB Flash to hold UDS/KWP2000 stacks, calibration routines, and pass-through bootloader logic. Its MSCAN controllers support OBD-II connectivity, while the 80 MHz HCS12X core runs USB-to-CAN protocol conversion with low latency. The XGATE engine handles CAN acknowledge timing deterministically during reflash sessions.
推荐
Battery Management Slave Controller
Within automotive 48 V mild-hybrid or 12 V battery management systems, the MC9S12XDP512VAL acts as a slave controller performing cell-voltage sampling via its ATD, cell-temperature scanning, and CAN reporting to a master BMS ECU. The 119 GPIO support ISO-SPI daisy chains to multiple cell-monitoring ASICs, while the 512 KB Flash holds calibration tables and safety diagnostics. The XGATE engine provides deterministic timing for cell-balancing PWM.
推荐
推荐产品汇总
工程参考数据： MC9S12XDP512VAL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC9S12XDT512MAL | MC9S12XDT512CAL | MC9S12XDP512CAL | MC9S12XEQ384CAG |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20 mm) | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same |
| Core | HCS12X (16-bit CISC) | HCS12X | HCS12X | HCS12X | HCS12X |
| Maximum Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Size | 512 KB | 512 KB | 512 KB | 512 KB | 384 KB |
| XGATE Co-processor | Yes | No | No | Yes | Yes |
| Supply Voltage | 2.35 V to 2.75 V | 2.35 V to 2.75 V | 2.35 V to 2.75 V | 2.35 V to 2.75 V | 2.35 V to 2.75 V |
| Automotive Grade (AEC-Q100) | No (industrial) | No (industrial) | Yes | Yes | Yes |
关键差异点
- XGATE co-processor for deterministic interrupt offload （对比 MC9S12XDT512MAL)
- Highest Flash density in the 112-LQFP S12X family （对比 MC9S12XEQ384CAG)
- Two automotive-grade variants in the same footprint （对比 MC9S12XDT512CAL)
设计说明
The MC9S12XDP512VAL integrates a 2.5 V voltage regulator that must be paired with a proper external ballast transistor and bulk capacitor on the VDDR pin per the reference manual. Place a 100 nF decoupling capacitor close to every VDD/VSS pair, plus a 10 uF bulk capacitor on the regulator output to suppress core-voltage sag during XGATE peripheral bursts and CAN driver events.
The 112-pin LQFP package exposes 119 GPIO and multiple supply/ground segments (VDDX0-3, VSSX0-3). On a 4-layer PCB, dedicate one solid inner plane to ground and route CAN differential pairs (CAN0_H/CAN0_L through CAN3_H/CAN3_L) as 100 ohm-impedance controlled pairs to avoid reflections on the bus. Keep the XTAL/EXTAL traces short and surrounded by ground pour to minimise oscillator jitter.
MSCAn TX/RX pins (PH0-PH7) drive external CAN transceivers such as the TJA1042 or TJA1050. Keep the MCU-to-transceiver traces under 50 mm and add a small series resistor or common-mode choke if the ECU is in a noisy power-train environment. Always place a 100 nF decoupling capacitor near the transceiver VCC pin and verify CAN bus termination (120 ohm) at each end of the bus segment.
Do not leave the TEST pin floating - it must be tied to VSS for normal operation or the device will enter factory test mode. The BKGD pin is shared with mode-entry functionality; ensure your debugger connector includes the standard NXP BDM pull-up arrangement so background debug mode (BDM) cannot be accidentally entered during power-on transients. When migrating from older S12XD masksets, verify that the new silicon revision matches the reference manual Rev. 2.21.
合规信息
Lead-free per NXP product page; RoHS/REACH/AEC-Q100 status not explicitly stated in the verified web data. The 'V' suffix in the part number indicates an industrial temperature grade (-40C to +105C); the 'C' suffix (e.g. MC9S12XDP512CAL) denotes the automotive grade.
