MCIMX257DJM4 - i.MX25 ARM9 400MHz MPU 400-LFBGA | NXP
料号： MCIMX257DJM4 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $32.5 | $32.50 |
| 10 | $28.95 | $289.50 |
| 100 | $25.4 | $2,540.00 |
| 500 | $22.1 | $11,050.00 |
| 1,000 | $19.85 | $19,850.00 |
MCIMX257DJM4 概述
Key specifications include a 400 MHz ARM926EJ-S core, 400-LFBGA (17x17) package, 128 I/O lines, and external program memory support with on-chip RAM. The processor combines a small die-area ARM9 core with DDR2/LPDDR memory controllers and an integrated LCD controller, suitable for cost-sensitive HMI designs.
The MCIMX257DJM4 belongs to the i.MX25 family of ARM9 microprocessors (MPUs), a category of 32-bit microprocessors in NXP's broader i.MX applications processor portfolio. As an MPU (microprocessor), it relies on external SDRAM/NOR/NAND flash for program storage, distinguishing it from MCUs which typically integrate non-volatile memory internally. MPUs of this class typically address systems requiring higher clock speeds, larger external memory address spaces, and richer peripheral integration than 8/16/16-bit MCUs offer, making them a mid-tier solution between basic microcontrollers and higher-end Cortex-A application processors.
Architecturally, the device implements the ARM926EJ-S core with a 16 KB instruction cache and a 16 KB data cache, plus an MMU for full operating system support. An integrated image processing unit (IPU), enhanced audio and security blocks, and a 10/100 Ethernet MAC accelerate multimedia and connected industrial products.
Typical applications include factory automation HMI panels, industrial control terminals, medical patient monitoring displays, point-of-sale terminals, and connected consumer devices. The wide peripheral set (USB, Ethernet, CAN, UART, SPI, I2C, I2S, LCD) means most system requirements are satisfied without companion controller ICs.
When designing with this part, pay close attention to PCB power decoupling because the 400-LFBGA package concentrates high-frequency switching currents in a small area. Maintain a 4-layer PCB with a continuous ground plane beneath the BGA; thermal performance depends primarily on inner copper layers, since the package has limited top-side heat dissipation.
直接替换替代料： MCIMX257DJM4 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MCIMX257DJM4 （相同外形与封装尺寸） ——差异在于 Operating Temperature, Core Architecture, Package, Program Memory Type.
快速对比工具——选择替代料号进行并排对比：
MCIMX257DJM4A
✅ 直接替换✓ 有现货
$16.54 / 个
查看数据手册 →MCIMX253DJM4A
✅ 直接替换📋 参考替代料（不在目录中）
MCIMX253CJM4A
✅ 直接替换✓ 有现货
$22.8 / 个
查看数据手册 →MCIMX255DJM4A
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MCIMX257DJM4 最大额定值与电气特性
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | i.MX25 |
| Core Processor | ARM926EJ-S |
| Core Count | 1 |
| 数据总线宽度 | 32-bit |
| 最大时钟频率 | 400 MHz |
| Program Memory Type | External (NOR/NAND) |
| RAM Size | 144 KB on-chip |
| Number of I/O | 128 |
| 封装 | 400-LFBGA (17x17 mm) |
| 工作温度 | -40C to +85C (industrial) |
| 安装类型 | Surface Mount |
| Packaging | Tray |
| RoHS 状态 | Compliant |
| Silicon Version | 1.2 |
MCIMX257DJM4 400-lfbga (17x17 mm) 引脚配置指南
MCIMX257DJM4（400-lfbga (17x17 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MCIMX257DJM4.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MCIMX257DJM4 适用于 6 应用s: Industrial Human-Machine Interface (HMI) Panels, Patient Monitoring and Medical Displays, Point-of-Sale (POS) Terminals, Connected Industrial Gateways, Building Automation and Energy Controllers, Industrial Printer and Label Controllers.
Industrial Human-Machine Interface (HMI) Panels
The MCIMX257DJM4 is well-suited to industrial HMI terminals because its integrated IPU (Image Processing Unit) drives TFT panels up to SVGA without an external graphics controller. Combined with the 10/100 Ethernet MAC, CAN bus, and up to 128 user I/Os, it provides everything needed for a connected factory-floor operator panel in a single 400-LFBGA device. The 400 MHz ARM926EJ-S core runs typical HMI applications (Qt/Embedded, lvgl, or WinCE) with margin for protocol stacks such as Modbus TCP and EtherNet/IP, while the -40C to +85C industrial temperature range meets IEC 61131-2 environments.
推荐
Patient Monitoring and Medical Displays
The MCIMX257DJM4 fits medical bedside monitors and clinical displays because its long-life ARM926EJ-S core gives a proven 32-bit platform with deterministic interrupt latency for data acquisition. The integrated IPU interfaces directly to medical-grade TFT displays, while the on-chip 144 KB SRAM keeps time-critical waveform buffers local to the CPU, avoiding DDR access during sampling. Industrial temperature grade and NXP's controlled-bill-of-materials support the long product lifetimes IEC 60601-1 medical device designs require.
推荐
Point-of-Sale (POS) Terminals
Point-of-sale terminals rely on the MCIMX257DJM4's combination of LCD controller, USB host/device ports, Ethernet MAC, and secure boot. The 32-bit ARM9 core runs Linux or Windows Embedded CE POS application stacks including payment terminal libraries and encryption middleware, while external NOR/NAND flash boots trusted firmware from authenticated ROM. The 400-LFBGA package keeps the overall POS motherboard compact yet provides sufficient I/O for mag-stripe readers, thermal printers, and customer-facing displays.
推荐
Connected Industrial Gateways
Industrial IoT gateways use the MCIMX257DJM4 because it integrates Ethernet MAC, USB, multiple UARTs, and CAN interfaces needed for protocol conversion between fieldbuses and Ethernet. The 400 MHz ARM9 runs Linux with full networking stack plus MQTT or OPC-UA clients, while the external memory interface supports DDR2 for buffering aggregated sensor data. Industrial temperature rating plus NXP's extended-product longevity program target factory gateways with 10+ year operational lifetimes.
推荐
Building Automation and Energy Controllers
Building automation controllers use the MCIMX257DJM4 to drive touch-screen thermostats, lighting controllers, and BACnet/Modbus supervisory nodes. The integrated LCD controller, capacitive touch I/O via I2C, and Ethernet connectivity satisfy modern touchscreen building controls without companion ICs, while the -40C to +85C range covers outdoor electrical enclosures and rooftop HVAC controls. The IPU handles text-and-icon HVAC graphics directly, freeing the ARM9 core for control loop code.
推荐
Industrial Printer and Label Controllers
Label and industrial printers benefit from the MCIMX257DJM4's combination of high-speed USB 2.0 device port for PC host connection, Ethernet for network printing, and the IPU driving operator displays and status panels. The 400 MHz ARM9 core runs PostScript/PDF interpreters and ARM9-optimized raster image processors (RIPs) for thermal-transfer printers, while the DDR2 controller handles large print-buffer memories required for 300/600 dpi output. The mature ARM9 toolchain supports long-life embedded printer code bases.
推荐
推荐产品汇总
工程参考数据： MCIMX257DJM4 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MCIMX257DJM4A | MCIMX253DJM4A | MCIMX253CJM4A | MCIMX255DJM4A |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 400-LFBGA (17x17) | 400-LFBGA (17x17) | 400-LFBGA (17x17) | 400-LFBGA (17x17) | 400-LFBGA (17x17) |
| Core | ARM926EJ-S | ARM926EJ-S | ARM926EJ-S | ARM926EJ-S | ARM926EJ-S |
| Max Clock Frequency | 400 MHz | 400 MHz | 400 MHz | 400 MHz | 400 MHz |
| Program Memory | External (NOR/NAND) | External (NOR/NAND) | External (NOR/NAND) | External (NOR/NAND) | External (NOR/NAND) |
| Silicon Version | 1.2 (legacy) | 1.2 (updated) | 1.2 | 1.2 industrial | 1.2 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C (industrial optimized) | -40C to +85C |
关键差异点
- ARM926EJ-S core with 144 KB on-chip SRAM （对比 Lower-tier Cortex-M microcontrollers)
- Integrated Image Processing Unit (IPU) with LCD controller （对比 External LCD controller companions)
- Mature ARM9 ecosystem with long-life production （对比 Newer Cortex-A application processors)
设计说明
The 400-LFBGA package with 0.8 mm ball pitch requires a 4-layer (or more) PCB with laser-drilled or 0.2 mm micro-vias to fan out signals. Use a continuous ground plane on layer 2 and a power plane on layer 3 to deliver low-impedance returns for DDR2 clocks operating at 133 MHz, and follow NXP's reference escape pattern for the LFBGA-400 array to avoid signal integrity issues.
The LFBGA-400 package dissipates heat primarily through inner PCB copper layers rather than top-side convection; design at least 4 thermal vias-in-pad under the center power balls, each plated with 1 oz copper. For continuous operating junction temperatures above 95C, add thermal copper pours on outer layers directly under the BGA exposed paddle area to keep Tj below the 105C industrial limit.
Do not assume MCIMX257DJM4 alternatives with the same 400-LFBGA footprint are drop-in. i.MX25 variants differ in pin multiplexing for USB, Ethernet, and display interfaces - always re-validate the BSDL/IBAT file and Pin-Mux tool configuration when substituting even between same-package parts. Also confirm boot mode strapping because i.MX25 variants sample boot pins on different balls.
合规信息
RoHS compliant per NXP/Freescale product page. AEC-Q100 not applicable - industrial temperature grade only. Halogen-free status not explicitly stated in fetched web data; request NXP environmental certification letter if needed.
