Microchip Technology

MCP3422A4-E/SN - 18-Bit Dual-Channel ADC | Microchip

料号: MCP3422A4-E/SN ✓ 量产中
2.048 V Vdss 8-pin SOIC Package
最小起订量: 1 |

MCP3422A4-E/SN 概述

The Microchip Technology MCP3422A4-E/SN is an 18-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, a 3.75 SPS conversion rate, and an 8-pin SOIC package. Its integrated 2.048 V precision reference supports a differential input range of ±2.048 V, while its two-wire I2C-compatible interface connects efficiently to embedded processors and sensors.

An ADC converts an analog voltage into a digital code for measurement, control, logging, or signal processing. The MCP3422 belongs to the delta-sigma ADC, data converter IC, and analog-to-digital converter hierarchy. Delta-sigma architectures are especially useful when high resolution, low noise, and good rejection of slow analog disturbances are more important than very high conversion throughput.

The principal features of the MCP3422 include two differential analog input channels, resolution up to 18 bits, an on-board 2.048 V reference, and operation from a single 2.7 V to 5.5 V supply. The A4 grade is associated with a 3.75 SPS conversion rate, making it suitable for continuous monitoring of slowly changing quantities such as temperature, pressure, load-cell output, and process-control signals.

The MCP3422 family combines continuous or single-shot conversion operation with an I2C-compatible serial interface. Differential inputs help reject common-mode noise when the source is arranged around ground or another biased reference. Using the internal reference simplifies the external circuit, although the application must remain within the ±2.048 V differential input range unless suitable external circuitry limits the signal.

Typical uses include industrial sensor acquisition, battery-powered environmental monitors, pressure and temperature instrumentation, precision weighing systems, and low-speed laboratory measurement equipment. Two input channels allow the converter to monitor either two independent sensor outputs or paired differential signals without requiring two separate converter packages.

Design the input network so that source impedance, common-mode voltage, and ESD protection do not overload the analog inputs. Place input filtering and reference-decoupling components close to the device, maintain clean supply routing, and confirm the I2C pull-up voltage and bus capacitance against the selected operating supply.

This product page combines manufacturer specifications, application guidance, package information, and verified same-package alternatives to support component selection and PCB planning. It also highlights the trade-offs between conversion rate, noise performance, channel count, and interface requirements for embedded measurement designs.

直接替换替代料: MCP3422A4-E/SN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MCP3422A4-E/SN (相同外形与封装尺寸) ——差异在于 Operating Temperature Range.

Microchip Technology
Operating Temperature Range: -40°C to +125°C

MCP3422A1-E/SN

✅ 直接替换
Microchip Technology
📦 8-pin SOIC
Delta-sigma ADC · Up to 18 bits · 2 channels · Differential · 2.048 V · -2.048 V to +2.048 V · 3.75 samples/s · 3.3 V or 5 V

联系询价

查看数据手册 →

MCP3422A0-E/SN

✅ 直接替换
📦 8-pin SOIC
Same MCP3422 SOIC-8 architecture, but the A0 rate-grade code replaces A4, selecting the lowest-rate family timing option rather than 3.75 samples/s

📋 参考替代料(不在目录中)

MCP3422A6-E/SN

✅ 直接替换
📦 8-pin SOIC
Same MCP3422 SOIC-8 architecture, but the A6 rate-grade code replaces A4, reducing the conversion interval below the A4 value of 3.75 samples/s

📋 参考替代料(不在目录中)

MCP3422A2-E/SN

✅ 直接替换 ⚠️ 规格未核验
📦 8-pin SOIC
Same MCP3422 SOIC-8 family, but the A2 rate-grade code replaces A4, changing the conversion interval from 3.75 samples/s to a slower rate

📋 参考替代料(不在目录中)

MCP3422A3-E/SN

✅ 直接替换 ⚠️ 规格未核验
📦 8-pin SOIC
Same MCP3422 SOIC-8 family, but the A3 rate-grade code replaces A4, changing the conversion interval from 3.75 samples/s to a slower rate

📋 参考替代料(不在目录中)

MCP3422A4-E/SN 最大额定值与电气特性

ADC Resolution 18 bit
Number of Input Channels 2 channels
Input Architecture Differential input
Conversion Technology Delta-sigma
Conversion Rate 3.75 samples/s
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Supply Voltage Range 2.7 V to 5.5 V
Serial Interface Two-wire I2C-compatible
工作温度范围 -40 °C to +125 °C
封装 8-pin SOIC
安装类型 Surface mount
Analog Input Count 2 single-ended or 2 differential inputs
Supply Architecture Single supply
RoHS 状态 unknown
REACH Status unknown
AEC-Q100 Qualification unknown

MCP3422A4-E/SN 8-pin soic 引脚配置指南

MCP3422A4-E/SN(8-pin soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

MCP3422A4-E/SN 的 8-pin soic 封装引脚图

暂无详细引脚数据: MCP3422A4-E/SN.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MCP3422A4-E/SN 适用于 6 应用s: Industrial Temperature and Pressure Monitoring, Precision Load-Cell and Strain Measurement, Battery-Powered Environmental Sensors, Precision Analog Test and Measurement, Process Control and Data Logging, Automotive and Mobile Analog Sensing.

🏭

Industrial Temperature and Pressure Monitoring

The MCP3422A4-E/SN is suited to industrial monitoring because it combines two differential input channels, up to 18-bit resolution, and a 3.75 samples/s conversion rate. Place it at the inputs of a bridge or ratiometric sensor, using the two channels to measure a differential signal and a reference or second sensor. The slow conversion interval supports stable temperature or pressure readings without unnecessary sampling throughput. Its 2.048 V internal reference simplifies acquisition when the sensor output fits the ±2.048 V differential range, while the SOIC-8 package keeps the analog section compact. Input filtering and ESD protection should be designed around the actual sensor impedance and industrial noise environment.

⚡

Precision Load-Cell and Strain Measurement

The MCP3422A4-E/SN is a practical choice for load-cell bridges and strain-gauge front ends that require differential excitation, high nominal resolution, and stable slow measurements. Its two differential channels can monitor a bridge output and a second precision node, while the 2.048 V on-board reference supports controlled analog measurements in the ±2.048 V range. At 3.75 samples/s, the converter favors settled readings over waveform capture. The engineering trade-off is that long-term accuracy depends on reference behavior, excitation stability, input-common-mode limits, and PCB leakage; use short, shielded analog traces and verify that any added protection does not introduce excessive leakage or nonlinear loading.

🧩

Battery-Powered Environmental Sensors

The MCP3422A4-E/SN works well in battery-powered environmental monitoring because it offers high nominal resolution for slow measurements and operates from a single 2.7 V to 5.5 V supply. It can digitize resistive or ratiometric sensors used for humidity, gas, soil-moisture, or ambient-condition monitoring without requiring a separate reference supply. Differential inputs help reject common-mode disturbance in long sensor wiring, while the 3.75 samples/s rate aligns with periodic environmental updates. Power optimization still depends on the device's detailed operating-mode current, which should be confirmed in the manufacturer datasheet, and the system should disable or sleep the converter whenever the measurement interval permits.

🔧

Precision Analog Test and Measurement

The MCP3422A4-E/SN can serve as the measurement ADC in a compact laboratory instrument when the signal is slow and high resolution is more valuable than rapid sampling. It is appropriate for monitoring reference levels, slow ramps, sensor outputs, and calibration values through its two differential channels. The 18-bit nominal resolution and integrated 2.048 V reference provide a straightforward measurement core, while I2C connectivity allows results to be transferred to a controller or display subsystem. Its conversion rate will not support high-bandwidth signal capture, so the instrument architecture should separate fast acquisition from slow precision measurement when necessary. Input leakage, reference stability, calibration, and grounding become especially important when evaluating small differential signals.

🏭

Process Control and Data Logging

The MCP3422A4-E/SN is useful in process-control and data-logging equipment that must capture two low-speed analog process variables with high resolution. It can monitor a transducer and a feedback or reference channel, providing the controller with compensated measurements over I2C. The 3.75 samples/s rate is sufficient for thermal, flow, level, and pressure loops whose signals change gradually. Differential input architecture reduces sensitivity to shared ground and common-mode noise, provided the input common-mode voltage remains within the manufacturer limits. Designers should add suitable RC or differential filtering at the connector, isolate long sensor cables where appropriate, and confirm the conversion and digital-filter settling times before setting the control update rate.

🚗

Automotive and Mobile Analog Sensing

The MCP3422A4-E/SN can support low-speed analog sensing in mobile or automotive-style electronics when its exact environmental and quality-document requirements satisfy the end application. Its two differential channels, 2.048 V internal reference, and single 2.7 V to 5.5 V supply simplify measurement of slow resistive, resistive-divider, or low-voltage differential sensors. The 3.75 samples/s rate supports thermal and slow positional feedback rather than rapid vehicle dynamics. Before using the device in an automotive design, verify the exact suffix's AEC-Q100 status, operating temperature qualifications, and production-change documentation with Microchip. Robust implementation also requires transient protection, input common-mode analysis, and careful grounding so that conducted and radiated disturbances do not degrade sensor readings.

推荐产品汇总

MCP3422A1-E/SN Microchip Technology 用于: Industrial Temperature and Pressure Monitoring, Battery-Powered Environmental Sensors, Process Control and Data Logging MCP3422A0-E/SN Same-family ultra-slow sensor acquisition option 用于: Industrial Temperature and Pressure Monitoring, Battery-Powered Environmental Sensors, Automotive and Mobile Analog Sensing MCP3422A6-E/SN Same-family SOIC ADC for lower-rate precision measurements 用于: Precision Load-Cell and Strain Measurement, Precision Analog Test and Measurement, Automotive and Mobile Analog Sensing MCP3422A3-E/SN Same-family SOIC ADC with different acquisition timing 用于: Precision Load-Cell and Strain Measurement, Process Control and Data Logging MCP3422A2-E/SN Same-family SOIC ADC for slow precision measurements 用于: Precision Analog Test and Measurement
What are the key specifications of MCP3422A4-E/SN that engineers should know?
The MCP3422A4-E/SN is an 18-bit, two-channel delta-sigma ADC with differential inputs, a 3.75 samples/s conversion rate, an integrated 2.048 V reference, and a two-wire I2C-compatible interface. According to the Microchip manufacturer datasheet, it operates from a single 2.7 V to 5.5 V supply and is offered in an 8-pin SOIC package. The ±2.048 V differential input range makes it particularly appropriate for low-frequency precision measurements rather than high-speed waveform acquisition.
Where to download the MCP3422A4-E/SN datasheet PDF?
The official MCP3422A4-E/SN datasheet PDF is available from Microchip Technology at the manufacturer document URL listed on this page. It covers the MCP3422, MCP3423, and MCP3424 family and includes the electrical characteristics, pin descriptions, conversion sequence, interface details, and application information needed to design the circuit. Use the manufacturer PDF rather than a distributor summary when assigning pins, calculating accuracy, or determining operating limits.
Where can I find the MCP3422A4-E/SN pinout?
The MCP3422A4-E/SN uses an 8-pin SOIC package, and its complete numbered pin assignment is shown in the Microchip manufacturer datasheet. The pin-description table should be used directly when assigning the two analog input channels, supply pins, ground, and I2C interface signals. This page does not reproduce the pin table because connector assignment errors can reverse analog inputs or connect supply pins incorrectly; verify the physical orientation and exposed-pad status against the selected orderable part.
What is the operating voltage of MCP3422A4-E/SN?
The MCP3422A4-E/SN operates from 2.7 V to 5.5 V using a single supply, according to the Microchip manufacturer datasheet and official product description. The same supply range supports both 3.3 V and 5 V embedded systems. The I2C pull-up arrangement should reference a compatible logic level, and analog input voltages must remain inside the device's specified operating limits; the ±2.048 V differential range describes the input measurement range, not permission to exceed the supply rails.
How many bits and channels does MCP3422A4-E/SN have?
The MCP3422A4-E/SN provides up to 18 bits of resolution across two analog input channels. According to the Microchip manufacturer datasheet, both channels support differential measurement, and the integrated 2.048 V reference establishes a nominal differential input range of ±2.048 V. The A4 version operates at 3.75 samples/s, so it is optimized for slow, high-resolution measurements such as temperature, pressure, strain, and load-cell signals rather than high-speed sampling.
Is MCP3422A4-E/SN suitable for temperature and pressure sensing?
Yes, the MCP3422A4-E/SN is well suited to slow temperature, pressure, and other high-resolution sensor measurements. Its 18-bit resolution, 3.75 samples/s conversion rate, differential inputs, and integrated 2.048 V reference support precise acquisition of slowly changing sensor outputs. The principal trade-off is throughput: a slow conversion rate reduces power and filtering requirements but is inappropriate for waveforms, motor-current waveforms, or other rapidly varying signals that need sampling in the kilohertz range.
What can replace MCP3422A4-E/SN in an existing design?
The closest same-footprint choices identified for an existing MCP3422A4-E/SN design are the MCP3422 family rate-grade variants in the SOIC-8 format, including MCP3422A1-E/SN, MCP3422A0-E/SN, and MCP3422A6-E/SN. They retain the two-channel, differential-input and I2C architecture, but the conversion-rate code changes. Review the manufacturer family specifications for the exact replacement and update firmware if the new rate grade changes acquisition timing or digital filtering.
Is MCP3422A4-E/SN the same as MCP3422A1-E/SN?
The MCP3422A4-E/SN and MCP3422A1-E/SN share the SOIC-8 footprint and the MCP3422 two-channel differential ADC architecture, but they are different rate grades. The A4 part is identified as a 3.75 samples/s device, while the A1 part uses a different conversion-rate code. Because the suffix changes performance timing rather than merely changing tape orientation, confirm the new conversion time, acquisition timing, and any firmware-dependent sampling interval before treating one as a replacement.
MCP3422A4-E/SN vs MCP3422A0-E/SN: which is better for a slow sensor?
Choose MCP3422A4-E/SN when the design needs a faster acquisition interval within the same MCP3422 family, or choose MCP3422A0-E/SN when the application deliberately prioritizes the lowest-rate grade and longer conversion interval. Both parts are two-channel, differential-input, 18-bit-capable delta-sigma converters with an I2C-compatible interface and a 2.048 V reference. The decision should follow the required update rate, sensor settling behavior, noise filtering, and system power budget rather than only the package.
When should I choose MCP3422A4-E/SN over a faster ADC?
Choose MCP3422A4-E/SN when the measured signal changes slowly and the system values resolution, low-noise behavior, simple differential input handling, and a compact 8-pin footprint over high throughput. Its 3.75 samples/s rate is appropriate for thermal, pressure, strain, and electrochemical monitoring. Use a faster ADC when the application must capture changing waveforms, perform real-time control, or sample at kilohertz rates, because increasing conversion throughput will usually require a different converter architecture, interface, power budget, and PCB layout.
What is the best drop-in replacement for MCP3422A4-E/SN?
The MCP3422A1-E/SN is a same-package replacement candidate because it retains the MCP3422's 8-pin SOIC footprint, two differential input channels, 18-bit-capable delta-sigma architecture, 2.048 V reference, and I2C-compatible interface. It is not an identical performance replacement because its rate-grade code differs. Before substitution, compare conversion timing, digital-filter settling, acquisition cycle behavior, electrical limits, and firmware timing. A PCB change should never be required solely to move from the A4 grade to this same-family SOIC option.
Where can I buy MCP3422A4-E/SN and check current lead time?
Use the Request a Quote form on this page to request the current MCP3422A4-E/SN price, stock position, minimum order quantity, and production lead time. The form provides a direct quotation channel for the exact 8-pin SOIC orderable part and helps confirm current supply without presenting stale catalog pricing. Include the required quantity, date code preference, and shipment destination in the request so the quotation reflects the actual manufacturing commitment.
What is the lead time for MCP3422A4-E/SN?
The current lead time for MCP3422A4-E/SN should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, date-code requirements, and current factory workload, so a generic delivery interval may not represent an available production schedule. State the required quantity and target delivery date in the request, and specify whether a standard tube or cut-tape delivery arrangement is required for the manufacturing line.
Is MCP3422A4-E/SN in stock?
Current MCP3422A4-E/SN stock status should be confirmed through the Request a Quote form on this page. The exact stock position can change by quantity and packaging arrangement, and a catalog listing alone does not confirm an allocatable quantity for a production order. The quote request can establish available inventory, current lead time, and the number of units that can be scheduled for shipment to your facility.
How do I design the input and layout for MCP3422A4-E/SN?
Design each differential input to remain within the ±2.048 V range and obey the input common-mode limits in the manufacturer datasheet. Place input filtering, reference bypass, and supply-decoupling components close to their associated pins, keep the analog ground return compact, and route the I2C lines away from sensitive analog nodes. Use pull-ups to the correct logic voltage and confirm the final component values against the selected source impedance, conversion rate, and required noise filtering.
What is the best Microchip equivalent for MCP3422A4-E/SN?
The closest identified Microchip alternatives are MCP3422A1-E/SN, MCP3422A0-E/SN, and MCP3422A6-E/SN in the same SOIC-8 format. Each belongs to the MCP3422 two-channel differential delta-sigma family, so the I2C interface and pin arrangement remain aligned, while the A0, A1, A4, or A6 rate code changes the conversion timing. Choose the grade that matches the required sampling interval and then adjust firmware timing accordingly; none should be selected solely because its package is identical.
Does MCP3422A4-E/SN comply with RoHS and automotive qualification requirements?
The RoHS, REACH, and automotive-qualification status of the exact MCP3422A4-E/SN orderable part should be confirmed in the Microchip product documentation or the current declaration of compliance. The manufacturer product page identifies the MCP3422 family and its operating characteristics, while the supplied technical record does not state a formal RoHS declaration, REACH declaration, or AEC-Q100 qualification for this exact suffix. If automotive qualification is mandatory, obtain the relevant Microchip quality documentation before releasing the design.

工程参考数据: MCP3422A4-E/SN ——对比、设计指导和合规信息。

选型指南

Choose MCP3422A4-E/SN when the design needs two differential channels, up to 18-bit resolution, an integrated 2.048 V reference, and a 3.75 samples/s acquisition rate in an 8-pin SOIC package. It is well matched to temperature, pressure, load-cell, strain, and other slowly changing sensor measurements. Choose MCP3422A1-E/SN when a lower conversion rate is desirable, MCP3422A0-E/SN for the family's lowest-rate timing option, and MCP3422A6-E/SN when a slower update interval is preferred. MCP3422A2-E/SN and MCP3422A3-E/SN are additional same-family rate choices, but their exact operating details should be confirmed before release. None of these choices improves waveform sampling: use a faster ADC architecture when the signal changes rapidly. The SOIC alternatives avoid a footprint change, but firmware timing and acquisition scheduling must be revised because the rate-grade suffix changes conversion timing.

与替代料对比

参数 本产品 MCP3422A1-E/SN MCP3422A0-E/SN MCP3422A6-E/SN MCP3422A2-E/SN MCP3422A3-E/SN
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology

关键差异点

  • Provides a faster acquisition interval within the MCP3422 rate-grade family (对比 MCP3422A1-E/SN)
  • Combines dual differential channels with an integrated precision reference (对比 MCP3422A0-E/SN)
  • Maintains the same SOIC-8 footprint across MCP3422 rate-grade substitutions (对比 MCP3422A6-E/SN)

设计说明

Use a differential input layout with symmetrical routing for each channel and keep the analog traces short and away from switching nodes and the I2C clock line. The ±2.048 V range is a differential measurement range; each external pin must also satisfy the device's absolute-maximum and common-mode limits. Add series resistance or differential filtering where sensor wiring is long, and verify that protection-device leakage does not degrade accuracy at low input levels.

Place the reference bypass capacitor and supply-decoupling capacitor close to their associated pins, with a short ground return. Route analog and digital return currents carefully to prevent converter and interface currents from flowing beneath the input network. A solid analog ground plane is generally preferable to fragmented stitching, but high-current digital returns should not cross the sensitive input area. Follow the capacitor placement and grounding layout in the manufacturer datasheet when finalizing the PCB.

The MCP3422A4-E/SN supports a single 2.7 V to 5.5 V supply, allowing the converter to share a 3.3 V or 5 V system rail. Select pull-up resistors for the I2C bus based on the logic voltage, bus capacitance, sink-current limit, and rise-time requirement rather than using an arbitrary value. In battery-powered systems, check the manufacturer operating-mode current and use the conversion cycle timing to estimate duty-cycle consumption; do not assume that the nominal 3.75 samples/s rate alone determines average power.

The A4 suffix identifies a conversion-rate grade within the MCP3422 family, not a package option. When changing to A0, A1, A2, A3, or A6, update firmware timing, digital-filter settling assumptions, and acquisition scheduling. Also distinguish the MCP3422A4-E/MC DFN orderable part from the MCP3422A4-E/SN SOIC part: their suffixes identify different packages and the DFN variant cannot replace the SOIC without a PCB redesign.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The exact-suffix RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the product information. Obtain the current Microchip declaration of compliance or quality documentation for the exact orderable part before making a compliance claim.

相关搜索

MCP3422A4-E/SN MCP3422A4-E/SN datasheet MCP3422A4-E/SN datasheet pdf MCP3422A4-E/SN pinout MCP3422A4-E/SN equivalent MCP3422A4-E/SN replacement MCP3422A4-E/SN cross reference MCP3422A4-E/SN price MCP3422A4-E/SN stock Microchip MCP3422A4-E/SN MCP3422A4-E/SN vs MCP3422A1-E/SN MCP3422 18 bit SOIC-8 ADC MCP3422A4-E/SN application circuit MCP3422A4-E/SN footprint

相关元器件 & 术语

Microchip Technology MCP3422A4-E/SN MCP3422A1-E/SN MCP3422A0-E/SN MCP3422A6-E/SN MCP3422A2-E/SN MCP3422A3-E/SN MCP3422 ADC analog-to-digital converter delta-sigma ADC data converter IC semiconductor I2C differential input 2.048 V reference 18-bit resolution 3.75 samples/s SOIC-8 surface mount load cell pressure sensor temperature sensor
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情