MCP3422A4-E/SN - 18-Bit Dual-Channel ADC | Microchip
部品番号: MCP3422A4-E/SN ✓ 生産中MCP3422A4-E/SN 概要
An ADC converts an analog voltage into a digital code for measurement, control, logging, or signal processing. The MCP3422 belongs to the delta-sigma ADC, data converter IC, and analog-to-digital converter hierarchy. Delta-sigma architectures are especially useful when high resolution, low noise, and good rejection of slow analog disturbances are more important than very high conversion throughput.
The principal features of the MCP3422 include two differential analog input channels, resolution up to 18 bits, an on-board 2.048 V reference, and operation from a single 2.7 V to 5.5 V supply. The A4 grade is associated with a 3.75 SPS conversion rate, making it suitable for continuous monitoring of slowly changing quantities such as temperature, pressure, load-cell output, and process-control signals.
The MCP3422 family combines continuous or single-shot conversion operation with an I2C-compatible serial interface. Differential inputs help reject common-mode noise when the source is arranged around ground or another biased reference. Using the internal reference simplifies the external circuit, although the application must remain within the ±2.048 V differential input range unless suitable external circuitry limits the signal.
Typical uses include industrial sensor acquisition, battery-powered environmental monitors, pressure and temperature instrumentation, precision weighing systems, and low-speed laboratory measurement equipment. Two input channels allow the converter to monitor either two independent sensor outputs or paired differential signals without requiring two separate converter packages.
Design the input network so that source impedance, common-mode voltage, and ESD protection do not overload the analog inputs. Place input filtering and reference-decoupling components close to the device, maintain clean supply routing, and confirm the I2C pull-up voltage and bus capacitance against the selected operating supply.
This product page combines manufacturer specifications, application guidance, package information, and verified same-package alternatives to support component selection and PCB planning. It also highlights the trade-offs between conversion rate, noise performance, channel count, and interface requirements for embedded measurement designs.
ドロップイン代替品: MCP3422A4-E/SN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MCP3422A4-E/SN (同一形状・フットプリント) — 相違点: Operating Temperature Range.
MCP3422A1-E/SN
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP3422A0-E/SN
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MCP3422A6-E/SN
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MCP3422A2-E/SN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MCP3422A3-E/SN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MCP3422A4-E/SN 最大定格&電気的特性
| ADC Resolution | 18 bit |
| Number of Input Channels | 2 channels |
| Input Architecture | Differential input |
| Conversion Technology | Delta-sigma |
| Conversion Rate | 3.75 samples/s |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Serial Interface | Two-wire I2C-compatible |
| 動作温度範囲 | -40 °C to +125 °C |
| パッケージ | 8-pin SOIC |
| 実装タイプ | Surface mount |
| Analog Input Count | 2 single-ended or 2 differential inputs |
| Supply Architecture | Single supply |
| RoHS ステータス | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
MCP3422A4-E/SN 8-pin soic ピン配置ガイド
MCP3422A4-E/SN (8-pin soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: MCP3422A4-E/SN.
詳細は データシート をご参照ください。
主な用途
MCP3422A4-E/SN の用途: 6 件s: Industrial Temperature and Pressure Monitoring, Precision Load-Cell and Strain Measurement, Battery-Powered Environmental Sensors, Precision Analog Test and Measurement, Process Control and Data Logging, Automotive and Mobile Analog Sensing.
Industrial Temperature and Pressure Monitoring
The MCP3422A4-E/SN is suited to industrial monitoring because it combines two differential input channels, up to 18-bit resolution, and a 3.75 samples/s conversion rate. Place it at the inputs of a bridge or ratiometric sensor, using the two channels to measure a differential signal and a reference or second sensor. The slow conversion interval supports stable temperature or pressure readings without unnecessary sampling throughput. Its 2.048 V internal reference simplifies acquisition when the sensor output fits the ±2.048 V differential range, while the SOIC-8 package keeps the analog section compact. Input filtering and ESD protection should be designed around the actual sensor impedance and industrial noise environment.
おすすめ
Precision Load-Cell and Strain Measurement
The MCP3422A4-E/SN is a practical choice for load-cell bridges and strain-gauge front ends that require differential excitation, high nominal resolution, and stable slow measurements. Its two differential channels can monitor a bridge output and a second precision node, while the 2.048 V on-board reference supports controlled analog measurements in the ±2.048 V range. At 3.75 samples/s, the converter favors settled readings over waveform capture. The engineering trade-off is that long-term accuracy depends on reference behavior, excitation stability, input-common-mode limits, and PCB leakage; use short, shielded analog traces and verify that any added protection does not introduce excessive leakage or nonlinear loading.
おすすめ
Battery-Powered Environmental Sensors
The MCP3422A4-E/SN works well in battery-powered environmental monitoring because it offers high nominal resolution for slow measurements and operates from a single 2.7 V to 5.5 V supply. It can digitize resistive or ratiometric sensors used for humidity, gas, soil-moisture, or ambient-condition monitoring without requiring a separate reference supply. Differential inputs help reject common-mode disturbance in long sensor wiring, while the 3.75 samples/s rate aligns with periodic environmental updates. Power optimization still depends on the device's detailed operating-mode current, which should be confirmed in the manufacturer datasheet, and the system should disable or sleep the converter whenever the measurement interval permits.
おすすめ
Precision Analog Test and Measurement
The MCP3422A4-E/SN can serve as the measurement ADC in a compact laboratory instrument when the signal is slow and high resolution is more valuable than rapid sampling. It is appropriate for monitoring reference levels, slow ramps, sensor outputs, and calibration values through its two differential channels. The 18-bit nominal resolution and integrated 2.048 V reference provide a straightforward measurement core, while I2C connectivity allows results to be transferred to a controller or display subsystem. Its conversion rate will not support high-bandwidth signal capture, so the instrument architecture should separate fast acquisition from slow precision measurement when necessary. Input leakage, reference stability, calibration, and grounding become especially important when evaluating small differential signals.
おすすめ
Process Control and Data Logging
The MCP3422A4-E/SN is useful in process-control and data-logging equipment that must capture two low-speed analog process variables with high resolution. It can monitor a transducer and a feedback or reference channel, providing the controller with compensated measurements over I2C. The 3.75 samples/s rate is sufficient for thermal, flow, level, and pressure loops whose signals change gradually. Differential input architecture reduces sensitivity to shared ground and common-mode noise, provided the input common-mode voltage remains within the manufacturer limits. Designers should add suitable RC or differential filtering at the connector, isolate long sensor cables where appropriate, and confirm the conversion and digital-filter settling times before setting the control update rate.
おすすめ
Automotive and Mobile Analog Sensing
The MCP3422A4-E/SN can support low-speed analog sensing in mobile or automotive-style electronics when its exact environmental and quality-document requirements satisfy the end application. Its two differential channels, 2.048 V internal reference, and single 2.7 V to 5.5 V supply simplify measurement of slow resistive, resistive-divider, or low-voltage differential sensors. The 3.75 samples/s rate supports thermal and slow positional feedback rather than rapid vehicle dynamics. Before using the device in an automotive design, verify the exact suffix's AEC-Q100 status, operating temperature qualifications, and production-change documentation with Microchip. Robust implementation also requires transient protection, input common-mode analysis, and careful grounding so that conducted and radiated disturbances do not degrade sensor readings.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCP3422A4-E/SN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCP3422A1-E/SN | MCP3422A0-E/SN | MCP3422A6-E/SN | MCP3422A2-E/SN | MCP3422A3-E/SN |
|---|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
主な差別化要因
- Provides a faster acquisition interval within the MCP3422 rate-grade family (vs MCP3422A1-E/SN)
- Combines dual differential channels with an integrated precision reference (vs MCP3422A0-E/SN)
- Maintains the same SOIC-8 footprint across MCP3422 rate-grade substitutions (vs MCP3422A6-E/SN)
設計ノート
Use a differential input layout with symmetrical routing for each channel and keep the analog traces short and away from switching nodes and the I2C clock line. The ±2.048 V range is a differential measurement range; each external pin must also satisfy the device's absolute-maximum and common-mode limits. Add series resistance or differential filtering where sensor wiring is long, and verify that protection-device leakage does not degrade accuracy at low input levels.
Place the reference bypass capacitor and supply-decoupling capacitor close to their associated pins, with a short ground return. Route analog and digital return currents carefully to prevent converter and interface currents from flowing beneath the input network. A solid analog ground plane is generally preferable to fragmented stitching, but high-current digital returns should not cross the sensitive input area. Follow the capacitor placement and grounding layout in the manufacturer datasheet when finalizing the PCB.
The MCP3422A4-E/SN supports a single 2.7 V to 5.5 V supply, allowing the converter to share a 3.3 V or 5 V system rail. Select pull-up resistors for the I2C bus based on the logic voltage, bus capacitance, sink-current limit, and rise-time requirement rather than using an arbitrary value. In battery-powered systems, check the manufacturer operating-mode current and use the conversion cycle timing to estimate duty-cycle consumption; do not assume that the nominal 3.75 samples/s rate alone determines average power.
The A4 suffix identifies a conversion-rate grade within the MCP3422 family, not a package option. When changing to A0, A1, A2, A3, or A6, update firmware timing, digital-filter settling assumptions, and acquisition scheduling. Also distinguish the MCP3422A4-E/MC DFN orderable part from the MCP3422A4-E/SN SOIC part: their suffixes identify different packages and the DFN variant cannot replace the SOIC without a PCB redesign.
コンプライアンス情報
The exact-suffix RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the product information. Obtain the current Microchip declaration of compliance or quality documentation for the exact orderable part before making a compliance claim.