Microchip Technology

MCP6032-E/MS - Dual 10 kHz Precision Op Amp | Microchip

料号: MCP6032-E/MS ✓ 量产中
1.8 V Vdss 900 nA per amplifier Id 8-MSOP Package
最小起订量: 1 |

MCP6032-E/MS 概述

The Microchip Technology MCP6032-E/MS is a dual, rail-to-rail input and output operational amplifier with a gain-bandwidth product of 10 kHz, typical operating current of 900 nA per amplifier, and maximum input offset voltage of 150 uV, housed in an 8-MSOP package.

An operational amplifier, or op amp, is an analog integrated circuit that amplifies the voltage difference between its two inputs. The MCP6032 belongs to the precision amplifier hierarchy, combining low offset voltage, low bias current, low power consumption, and rail-to-rail signal handling. Its dual configuration places two amplifiers in one package, making it useful for compact sensor, measurement, and signal-conditioning systems.

The principal operating characteristics include operation from a single supply as low as 1.8 V, a typical quiescent current of 0.9 uA per amplifier, and input offset voltage below 150 uV. Rail-to-rail input and output operation allows the amplifier to use nearly the complete supply range for signal processing. The 10 kHz gain-bandwidth product supports low-frequency precision applications rather than high-speed waveform or communications workloads.

Microchip's advanced CMOS process provides low bias current, high open-loop gain, low operating current, and rail-to-rail input and output behavior. The dual circuit organization reduces package count when a board requires two similar analog channels, such as differential sensing, current monitoring, or amplification of two sensor outputs. Because the MCP6032 is optimized for precision and low power rather than speed, stable closed-loop gain and careful input common-mode and output-swing analysis remain important.

Typical applications include battery-powered current monitoring, portable sensor interfaces, low-frequency instrumentation, and condition-monitoring circuits. The 1.8 V minimum supply supports compact energy-harvesting and wearable systems, while the low operating current is valuable when the amplifier must remain active throughout long battery-powered operating periods. Its low offset voltage also helps reduce measurement error in Wheatstone-bridge and resistive-sensor front ends.

When designing the circuit, check output swing and common-mode range across the complete input range, not only at the nominal supply voltage. Decouple the power pin close to the package, keep feedback components adjacent to their associated amplifier, and account for bias-current error when driving high source impedances. Avoid designs that require substantially more than 10 kHz of closed-loop bandwidth.

This page combines manufacturer performance characteristics with application guidance, package information, selection criteria, and a strict same-footprint replacement assessment for engineers designing low-power precision analog circuits.

直接替换替代料: MCP6032-E/MS ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MCP6032T-E/MS

✅ 直接替换
📦 8-MSOP
Different temperature-grade ordering code; core 10 kHz gain-bandwidth product and dual-amplifier architecture remain the same

📋 参考替代料(不在目录中)

MCP6032-E/MS 最大额定值与电气特性

Operational Amplifier Type Dual precision CMOS operational amplifier
Number of Amplifier Circuits 2 circuits
Minimum Single-Supply Voltage 1.8 V
Typical Operating Current 900 nA per amplifier
Gain-Bandwidth Product 10 kHz
Input Offset Voltage 150 uV maximum
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Process Technology Advanced CMOS
封装 8-MSOP
安装类型 Surface mount

MCP6032-E/MS 8-msop 引脚配置指南

MCP6032-E/MS(8-msop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

MCP6032-E/MS 的 8-msop 封装引脚图

暂无详细引脚数据: MCP6032-E/MS.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MCP6032-E/MS 适用于 6 应用s: Battery Current Monitoring, Portable Sensor Conditioning, Low-Frequency Instrumentation, Wearable Health Monitoring, Industrial Condition Monitoring, Portable Process Measurement.

⚡

Battery Current Monitoring

The MCP6032-E/MS fits low-side or high-side current-monitoring designs that require low supply current and accurate amplification around a shunt. Its 900 nA typical operating current per amplifier helps limit standing load, while maximum input offset voltage of 150 uV reduces gain-stage error. Rail-to-rail input and output operation provides useful signal range in single-supply systems operating from 1.8 V. The 10 kHz gain-bandwidth product is appropriate for slow current changes rather than high-bandwidth pulse capture. Verify the shunt common-mode voltage, amplifier output swing, and required measurement bandwidth.

🧩

Portable Sensor Conditioning

The MCP6032-E/MS is suitable for conditioning resistive or bridge-based sensors in compact battery-powered equipment. Its low typical current of 900 nA per amplifier reduces energy use, and the 150 uV maximum offset specification limits input-referred error in precision gain stages. A single 1.8 V or higher supply supports the device, while rail-to-rail input and output operation improves usable signal span. The dual package allows two channels to share one component. Confirm sensor excitation requirements, common-mode limits, and output settling behavior against the 10 kHz gain-bandwidth product.

🔧

Low-Frequency Instrumentation

The MCP6032-E/MS can amplify slow instrumentation signals when bandwidth is less important than low offset and low supply consumption. Its 10 kHz gain-bandwidth product supports low-frequency gain stages, and maximum input offset voltage of 150 uV helps preserve measurement accuracy. Rail-to-rail input and output behavior is valuable around a low single-supply rail. Use each amplifier channel for independent gain or buffer functions, with nearby feedback components and solid grounding. Validate noise performance, output loading, and settling time against the measurement bandwidth before production release.

💊

Wearable Health Monitoring

The MCP6032-E/MS is appropriate for low-power biosignal front ends when the monitored bandwidth is modest. Its 900 nA typical current per amplifier supports longer battery life, while the 150 uV maximum input offset voltage helps reduce error in weak-signal amplification stages. Rail-to-rail input and output operation is useful in compact single-supply wearables powered at 1.8 V or above. The dual configuration can handle two sensing channels or one sensing channel plus a reference buffer. Input protection, electrode biasing, noise, safety isolation, and medical qualification remain system-level requirements.

🏭

Industrial Condition Monitoring

The MCP6032-E/MS can condition slow sensor outputs from industrial equipment such as temperature, pressure, or vibration status sensors. The 10 kHz gain-bandwidth product is suitable for low-frequency signals, and the low 900 nA typical current per amplifier reduces power demand in distributed monitoring nodes. Its precision-oriented offset specification supports gain stages where small signals matter. The 8-MSOP package helps limit board area, while dual amplification reduces component count. Engineers must still account for industrial noise, surge exposure, input protection, grounding, and the required operating-temperature range.

📱

Portable Process Measurement

The MCP6032-E/MS fits portable process-measurement instruments that amplify low-level analog signals from pressure, flow, or chemical sensors. Operation from a single supply as low as 1.8 V enables compact battery-powered instruments, and the dual amplifier provides two closely related channels. The 150 uV maximum input offset voltage supports precision gain stages, while rail-to-rail operation expands the usable signal range. Because the device has a 10 kHz gain-bandwidth product, it should be reserved for slow process variables rather than fast transient analysis. Validate sensor excitation, common-mode range, and output-headroom requirements.

推荐产品汇总

MCP6032T-E/MS Temperature-grade family variant for precision current-monitoring designs 用于: Battery Current Monitoring, Portable Sensor Conditioning, Wearable Health Monitoring, Industrial Condition Monitoring, Portable Process Measurement MCP6031-E/MS Microchip Technology 用于: Battery Current Monitoring, Low-Frequency Instrumentation, Wearable Health Monitoring, Industrial Condition Monitoring, Portable Process Measurement MCP6034-E/MS Quad family option for multi-channel measurement systems 用于: Battery Current Monitoring, Low-Frequency Instrumentation, Wearable Health Monitoring, Industrial Condition Monitoring, Portable Process Measurement MCP6007T-E/MS Microchip alternate dual amplifier family for comparison 用于: Portable Sensor Conditioning MCP6072T-E/SN Microchip Technology 用于: Portable Sensor Conditioning MCP6033-E/MS Microchip Technology 用于: Low-Frequency Instrumentation
What are the key specifications of MCP6032-E/MS that engineers should know?
The MCP6032-E/MS is a dual precision op amp with a 10 kHz gain-bandwidth product, 900 nA typical operating current per amplifier, maximum input offset voltage of 150 uV, and rail-to-rail input and output operation. According to the Microchip Technology MCP6032 product page, the device uses advanced CMOS technology and supports single-supply operation from 1.8 V. It is packaged in 8-MSOP, making it suitable for compact, low-frequency, low-power analog signal-conditioning circuits.
What is the supply voltage range of MCP6032-E/MS?
The MCP6032-E/MS operates from a single supply as low as 1.8 V, as described by the Microchip Technology MCP6032 family documentation. This makes the dual amplifier suitable for low-voltage battery systems and energy-harvesting equipment. The upper supply-voltage limit must be taken from the manufacturer datasheet before final circuit release, and the complete operating range should be checked against ambient temperature and output-load conditions.
What is the gain-bandwidth product of MCP6032-E/MS?
The MCP6032-E/MS has a gain-bandwidth product of 10 kHz according to the Microchip Technology MCP6032 product page. This parameter determines how much closed-loop bandwidth is available at a selected noise gain: higher closed-loop gain reduces usable bandwidth. The device is therefore best suited to low-frequency precision and sensor-conditioning applications rather than waveform, video, or high-speed communications circuits.
How much current does MCP6032-E/MS consume?
The MCP6032-E/MS draws a typical operating current of 900 nA per amplifier, or 0.9 uA, according to the Microchip Technology MCP6032 product page. With two amplifiers in the package, the typical aggregate current is 1.8 uA before considering output-load and leakage effects. This low current makes the part well suited to continuously powered battery monitoring, portable measurement, and low-duty-cycle sensor interfaces.
Where can I download the MCP6032-E/MS datasheet PDF?
The official MCP6032 datasheet can be downloaded from the Microchip Technology MCP6032 product page, which is linked in the datasheet link on this page. The document covers the MCP6031, MCP6032, MCP6033, and MCP6034 family, including electrical characteristics, rail-to-rail operation, offset voltage, supply-current behavior, package drawings, and typical application circuits. Use the manufacturer PDF for final design sign-off.
Where can I find the MCP6032-E/MS pinout?
The MCP6032-E/MS pin configuration and package drawing are shown in the pinout section of the Microchip Technology MCP6032 manufacturer datasheet. The device uses an 8-MSOP package with two operational amplifiers, power pins, and input and output connections for each channel. Assign PCB tracks only after checking the numbered package drawing and exposed thermal requirements in the datasheet.
What can replace MCP6032-E/MS on the same PCB?
The closest same-footprint option identified is MCP6032T-E/MS, a temperature-grade variant of the MCP6032 in the same 8-MSOP configuration. It can be considered pin-compatible when its specified temperature range covers the design requirement. No other manufacturer part was established as a verified drop-in replacement, so changing the amplifier should not be based only on a similar gain-bandwidth rating or matching pin count.
Is MCP6032-E/MS the same as MCP6032T-E/MS?
The MCP6032T-E/MS is a closely related Microchip variant with the same MCP6032 dual-amplifier architecture and 8-MSOP footprint, while its ordering code indicates a different temperature grade. It is a practical drop-in candidate only when the specified temperature range satisfies the equipment requirement. Confirm the full ordering code, temperature limits, electrical limits, and lifecycle status in the manufacturer documentation before substitution.
MCP6032-E/MS vs MCP6007T-E/MS: which is better for precision sensing?
The MCP6032-E/MS is better suited to precision, low-frequency sensing because its manufacturer-rated gain-bandwidth product is 10 kHz, typical operating current is 900 nA per amplifier, and maximum offset voltage is 150 uV. The MCP6007T-E/MS is a different Microchip family with different dynamic performance. Choice should follow the required signal bandwidth, noise, offset, supply voltage, and exact 8-MSOP pin assignment rather than package appearance alone.
When should I choose MCP6032-E/MS over a faster general-purpose op amp?
Choose the MCP6032-E/MS when the measurement path is low frequency, supply current is important, and offset accuracy is more valuable than wide bandwidth. Its 10 kHz gain-bandwidth product, 900 nA typical operating current per amplifier, and 150 uV maximum offset voltage align with battery current monitoring and precision sensor conditioning. A faster amplifier is preferable when the signal contains significant high-frequency content or requires higher closed-loop bandwidth.
Is MCP6032-E/MS suitable for battery current monitoring?
The MCP6032-E/MS is suitable for many battery current-monitoring circuits because it supports single-supply operation from 1.8 V, consumes 900 nA typical current per amplifier, and offers rail-to-rail input and output operation. Its 150 uV maximum input offset voltage supports precision gain stages. The amplifier should still be checked against shunt-common-mode range, output swing, noise requirements, and the monitoring bandwidth needed for the measurement.
How much power does MCP6032-E/MS use?
At the minimum 1.8 V supply, the typical unloaded power consumption for both amplifiers is approximately 3.24 uW, calculated from 1.8 V and the typical combined current of 1.8 uA. This is an estimate based on nominal unloaded operating current, not a maximum-power specification. Actual consumption rises with supply voltage, output current, switching activity, and leakage, so use the manufacturer maximum-current limits for worst-case battery-life analysis.
Where can I buy MCP6032-E/MS and check its lead time?
Use the Request a Quote form on this page to request MCP6032-E/MS availability, current lead time, minimum order quantity, and a formal quotation. The form is the appropriate route for a configuration-specific purchase because lifecycle, stock, and delivery status can change. Provide the required quantity, 8-MSOP package, and any date-code or traceability requirements with the request.
What is the price of MCP6032-E/MS?
Use the Request a Quote form on this page for the current MCP6032-E/MS quotation. The requested quantity, authorized-channel availability, and delivery requirements affect the final commercial response, so a static price is not appropriate for this listing. The form can provide current commercial terms without relying on an outdated distributor listing or an unverified historical price.
Is MCP6032-E/MS in stock?
Inventory status for MCP6032-E/MS should be confirmed through the Request a Quote form on this page. The manufacturer lists the MCP6032 family on its product page, while exact orderable stock can vary by package suffix, quantity, and fulfillment channel. Submit the required quantity and delivery schedule to obtain the most current availability response for this exact 8-MSOP orderable part.
What is the best Microchip equivalent for MCP6032-E/MS?
The best Microchip alternative identified for the same 8-MSOP footprint is MCP6032T-E/MS because it retains the dual MCP6032 family architecture and changes the ordering designation rather than the circuit function. It remains necessary to verify the temperature grade and lifecycle requirements. No cross-manufacturer equivalent was established as a verified pin-to-pin drop-in, so functional comparability should not be treated as proof of drop-in compatibility.

工程参考数据: MCP6032-E/MS ——对比、设计指导和合规信息。

选型指南

Choose MCP6032-E/MS for low-frequency precision signal conditioning where low supply current, rail-to-rail operation, and a maximum 150 uV offset specification are important. Its 10 kHz gain-bandwidth product and 1.8 V minimum supply suit battery current monitoring, portable sensing, and instrumentation, but it is not appropriate where high-speed signals require greater closed-loop bandwidth. Consider MCP6032T-E/MS when the same 8-MSOP MCP6032 architecture is desired and its temperature designation satisfies the product requirements. MCP6031-E/MS is useful for a single channel, while MCP6034-E/MS reduces package count in multichannel designs. Faster Microchip families may be preferable when signal bandwidth dominates, and any alternative must be checked for exact pin assignment, electrical limits, supply range, and environmental requirements before PCB reuse.

与替代料对比

参数 本产品 MCP6032T-E/MS
Brand Microchip Technology Microchip Technology
Package 8-MSOP 8-MSOP
Amplifier Configuration Dual Dual
Minimum Single-Supply Voltage 1.8 V 1.8 V
Typical Operating Current 900 nA per amplifier 900 nA per amplifier
Gain-Bandwidth Product 10 kHz 10 kHz
Input Offset Voltage 150 uV maximum 150 uV maximum
Input and Output Operation Rail-to-rail Rail-to-rail
Process Technology Advanced CMOS Advanced CMOS

关键差异点

  • Low operating current supports battery-powered precision circuits (对比 MCP6007T-E/MS)
  • Dual precision amplifier in a compact 8-MSOP (对比 MCP6031-E/MS)
  • Precision offset specification for low-level gain stages (对比 MCP6072T-E/SN)
  • Same-footprint temperature-grade family option (对比 MCP6032T-E/MS)

设计说明

Do not treat similar package dimensions as proof of drop-in compatibility. The MCP6032T-E/MS is the closest same-footprint option because it remains in the MCP6032 family and uses 8-MSOP. Before substituting it, compare temperature grade, electrical limits, supply range, offset limits, and pin functions in the manufacturer documentation. Other families may use the same mechanical outline while having different input, output, or enable assignments.

Place the supply-decoupling capacitor as close as practical to the power pins and connect it to a low-impedance ground plane. Keep each amplifier's feedback resistors and optional input or output capacitors adjacent to the corresponding pins to minimize parasitic feedback and coupling. The 10 kHz gain-bandwidth product generally allows conventional low-frequency layout practices, but sensitive sensor inputs should still use short traces and a grounded guard area where appropriate.

Check both input common-mode range and output swing throughout the intended signal and supply range. Rail-to-rail operation improves usable range, but load current, output configuration, and temperature affect the final limits. For high-impedance sensors, include input-bias-current error in the noise budget and guard against leakage across the board. Use a unity-gain or modest-gain configuration when output stability at high capacitive loads is uncertain.

Estimated dual-amplifier power at 1.8 V is 3.24 uW, using the typical combined operating current of 1.8 uA and the minimum specified supply voltage. This estimate excludes load power, leakage, and dynamic overhead, so battery-life calculations should use worst-case current limits from the datasheet. A higher supply voltage increases the voltage term in power dissipation even when the amplifier current remains constant.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The MCP6032 is an industrial and commercial precision operational amplifier; automotive qualification status and specific environmental declarations must be confirmed for the exact ordering code.

数据核验日期: 2026-11-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

mcp6032 datasheet MCP6032-E/MS datasheet MCP6032-E/MS pinout MCP6032-E/MS specifications MCP6032-E/MS equivalent MCP6032-E/MS replacement MCP6032-E/MS drop-in substitute MCP6032-E/MS price MCP6032-E/MS stock Microchip MCP6032-E/MS MCP6032 8-MSOP pinout MCP6032 battery current monitoring MCP6032 vs MCP6007 MCP6032 rail-to-rail op amp

相关元器件 & 术语

Microchip Technology MCP6032-E/MS MCP6032T-E/MS MCP6031 MCP6032 MCP6033 MCP6034 MCP6007T-E/MS MCP6072T-E/SN operational amplifier precision amplifier analog integrated circuit rail-to-rail input rail-to-rail output gain-bandwidth product input offset voltage quiescent current CMOS process technology 8-MSOP package MSOP family surface-mount package battery current monitoring sensor conditioning industrial instrumentation low-power analog circuit
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情