MCP607T-I/SN - Dual 155 kHz Micropower Op Amp | Microchip
料号: MCP607T-I/SN ✓ 量产中MCP607T-I/SN 概述
An operational amplifier, or op amp, is a high-gain differential amplifier used to amplify, buffer, filter, or compare low-level analog signals. The MCP607 belongs to the operational-amplifier hierarchy within analog ICs, where its CMOS implementation emphasizes low bias current, low power consumption, rail-to-rail output operation, and single-supply usability.
The MCP607 combines two amplifier channels in one package. Key characteristics include a 155 kHz gain-bandwidth product, 18.7 uA typical operating current, less than 250 uV offset voltage, low input bias current, and rail-to-rail output swing. Its micropower operation is particularly useful in portable instruments, battery-powered sensors, and low-voltage industrial measurement systems where continuous analog amplification must remain energy efficient.
Microchip's CMOS process technology supports the device's low-power and low-bias-current characteristics. The amplifiers are designed for single-supply operation, which simplifies signal-chain design when the input and output signals remain within the 2.5 V to 6.0 V supply range. Exact input common-mode range, noise density, slew rate, and open-loop gain values require confirmation in the manufacturer datasheet.
Typical uses include sensor-signal conditioning, low-voltage transducer amplification, audio preamplification, portable measurement equipment, and general-purpose analog buffering. The dual-channel configuration also supports independent signal paths, such as filtering two sensor outputs or implementing an instrumentation front end with matched amplifier stages.
Designers should verify the actual input common-mode range before accepting signals near the supply rails, even though the output can swing rail to rail. Stable operation also depends on the selected gain, capacitive loading, output isolation, and the bypass-capacitor configuration recommended by the manufacturer.
This product page consolidates the device's key operating characteristics, sourcing information, available drop-in alternatives, and application-focused design guidance. It is intended to help engineers identify the correct Microchip ordering code, assess the amplifier for a low-voltage analog design, and plan PCB implementation before completing detailed circuit validation.
直接替换替代料: MCP607T-I/SN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MCP607T-I/SN (相同外形与封装尺寸) ——差异在于 Amplifier Type, Package, Number of Channels.
MCP607-I/SN
✅ 直接替换联系询价
查看数据手册 →MCP607T-I/SN 最大额定值与电气特性
| Amplifier Type | Dual general-purpose operational amplifier |
| Channel Count | 2 channels |
| Supply Voltage Range | 2.5 V to 6.0 V |
| Typical Operating Current | 18.7 uA |
| Listed Operating Current | 25 uA |
| Gain-Bandwidth Product | 155 kHz |
| Offset Voltage | Less than 250 uV |
| Input Bias Current | 80 pA maximum at +85 C |
| Output Swing | Rail-to-rail |
| Technology | CMOS |
| Temperature Grade | Industrial |
| 封装 | 8-pin SOIC, 3.9 mm width |
| 安装类型 | Surface mount |
MCP607T-I/SN 引脚配置
| 引脚 1 | OUTA — Amplifier A output |
| 引脚 2 | IN A- — Amplifier A inverting input |
| 引脚 3 | IN A+ — Amplifier A non-inverting input |
| 引脚 4 | V- — Negative supply or ground connection |
| 引脚 5 | IN B+ — Amplifier B non-inverting input |
| 引脚 6 | IN B- — Amplifier B inverting input |
| 引脚 7 | OUTB — Amplifier B output |
| 引脚 8 | V+ — Positive supply connection |
典型应用
MCP607T-I/SN 适用于 6 应用s: Battery-Powered Sensor Signal Conditioning, Portable Medical Measurement Instruments, Low-Voltage Audio Preamplification, Industrial Data Acquisition, Portable Test and Measurement, Low-Power IoT Sensor Nodes.
Battery-Powered Sensor Signal Conditioning
The MCP607T-I/SN fits low-energy sensor front ends because its 18.7 uA typical operating current limits continuous amplifier bias consumption while each channel handles a separate signal. Place the dual amplifier around resistive sensors, bridge outputs, or low-level transducers operating from a 2.5 V to 6.0 V source. Its less-than-250-uV offset characteristic helps preserve small differential signals, while rail-to-rail output swing increases usable signal range. Confirm the input common-mode limits against the sensor output and use local bypass capacitance to maintain a low-impedance supply reference.
推荐
Portable Medical Measurement Instruments
The MCP607T-I/SN is appropriate for portable biomedical instrumentation where two low-level channels can be amplified from a compact, low-voltage supply. Its 155 kHz gain-bandwidth product is suitable for low-bandwidth pressure, temperature, or biochemical sensor signals rather than wideband waveform work, and its 18.7 uA typical operating current supports longer battery life. The dual SOIC package reduces board area, while less-than-250-uV offset supports precision-oriented signal paths. Validate patient-safety isolation, input protection, and applicable medical-device requirements separately from the op amp selection.
推荐
Low-Voltage Audio Preamplification
The MCP607T-I/SN can serve as a dual low-voltage audio preamplifier for microphone or line-level signals when bandwidth requirements remain modest. Its 155 kHz gain-bandwidth product provides more bandwidth than a strictly audio-focused low-power amplifier, while the 18.7 uA typical operating current limits power use in portable listening equipment. Rail-to-rail output swing allows the amplifier to approach the supply limits, although gain must be limited to prevent instability. Check input-noise and slew-rate figures in the manufacturer datasheet, and keep feedback routing short to avoid added oscillation margin problems.
推荐
Industrial Data Acquisition
The MCP607T-I/SN is useful in compact industrial data-acquisition modules that condition two low-level analog channels from sensors, resistive dividers, or external transducer modules. Its industrial ordering designation supports use in industrial environments, and the 155 kHz gain-bandwidth product is appropriate for slow process signals requiring moderate amplification. The 18.7 uA typical operating current is valuable when several amplifier channels share a limited power budget. Provide local supply decoupling, maintain common ground paths between the sensor and amplifier, and verify the input common-mode range across industrial supply tolerances.
推荐
Portable Test and Measurement
The MCP607T-I/SN supports compact handheld test equipment by amplifying two low-level inputs without the current draw of a higher-bandwidth dual op amp. Its 18.7 uA typical operating current complements a battery-powered architecture, and the 2.5 V minimum supply permits operation from appropriately regulated low-voltage sources. The less-than-250-uV offset characteristic is useful for excitation, sensing, and reference-related paths, while the 155 kHz gain-bandwidth product handles moderate-frequency instrumentation signals. Account for probe capacitance and sensor drive requirements when selecting the external feedback network.
推荐
Low-Power IoT Sensor Nodes
The MCP607T-I/SN fits IoT sensor nodes that require continuous analog amplification near a sensor rather than transmitting an unconditioned signal directly to a digital converter. Two channels can amplify separate environmental or motion-related inputs, while 18.7 uA typical operating current limits the amplifier contribution to node energy use. Its rail-to-rail output can improve utilization of a 2.5 V to 6.0 V rail, and the less-than-250-uV offset supports small-signal conditioning. Pair it with careful input protection and verify common-mode limits before the sensor output can approach either supply rail.
推荐
推荐产品汇总
工程参考数据: MCP607T-I/SN ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MCP607-I/SN |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 8-pin SOIC | 8-pin SOIC - same |
| Amplifier Configuration | Dual operational amplifier | Dual operational amplifier |
| Gain-Bandwidth Product | 155 kHz | 155 kHz |
| Typical Operating Current | 18.7 uA | 18.7 uA |
| Offset Voltage | Less than 250 uV | Less than 250 uV |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Technology | CMOS | CMOS |
| Temperature Grade | Industrial | Industrial |
关键差异点
- Low operating current for dual-channel amplification (对比 MCP607-I/SN)
- Two amplifiers in a compact 8-pin SOIC (对比 MCP607-I/SN)
- Rail-to-rail output operation from a single supply (对比 MCP607-I/SN)
设计说明
Place the supply bypass capacitor close to pins 8 and 4, with a short return path to the ground reference. Keep amplifier inputs, feedback resistors, and output routing compact to minimize parasitic capacitance and susceptibility to injected noise. For sensor inputs, use a grounded guard or shield where appropriate, and separate sensitive input traces from switching supplies and high-current return paths.
The MCP607T-I/SN operates from 2.5 V to 6.0 V, so ensure the source voltage remains within range during startup, transient, and shutdown. Use the 18.7 uA typical operating current as a baseline for the amplifier bias budget, then add the load-dependent current of the surrounding circuit. If the source is shared with digital circuitry, provide local filtering rather than relying on remote bulk capacitance alone.
Rail-to-rail output swing does not automatically mean the input common-mode range reaches both supply rails. Verify input-range limits for the selected operating conditions, especially when a sensor can swing to 0 V or near the positive rail. Avoid allowing output saturation to drive deep into the amplifier's linear region, and check capacitive loading before adding large capacitors directly to the output.
At low closed-loop gains, excessive output capacitance or excessive loop gain can affect stability. Keep feedback components close to the amplifier and compare the selected gain with the recommended application circuits in the manufacturer datasheet. For low-level instrumentation, use short differential traces, maintain a quiet reference return, and avoid sharing high-current return paths with the input reference.
合规信息
The manufacturer page identifies MCP607 as an industrial-temperature dual operational amplifier, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited product-page text.