MPC8272VRMIBA - PowerQUICC II 266MHz MPU | NXP Semiconductors
料号： MPC8272VRMIBA ⚠ 最后一次采购| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $78.5 | $78.50 |
| 10 | $71.2 | $712.00 |
| 100 | $64.85 | $6,485.00 |
| 500 | $58.4 | $29,200.00 |
| 1,000 | $52.95 | $52,950.00 |
MPC8272VRMIBA 概述
A PowerQUICC II MPU is a system-on-chip networking microprocessor that combines a general-purpose PowerPC core with a dedicated RISC communications engine (CPM). This dual-processor architecture is used in routers, switches, and wireless base stations where the CPM offloads DMA, TDM, ATM, and Ethernet MAC processing from the main core, freeing the CPU for routing, encryption, and control-plane software. PowerQUICC II sits within the broader taxonomy: MPU -> microprocessor -> processor -> integrated circuit -> semiconductor.
Key features include hardware-accelerated encryption via the integrated SEC engine, dual 10/100 Mbps Ethernet MACs through the CPM, a 32-bit/66 MHz PCI interface, USB 1.1 host/slave, UTOPIA-II for ATM/PHY glueless connectivity, and 16 Kbytes of instruction cache plus 16 Kbytes of data cache. The 516-pin PBGA (27 x 27 mm) package exposes the full external memory bus for SDRAM, Flash, and peripheral expansion.
The MPC8272 uses a 60x bus to external memory and a separate CPM local bus. The CPM contains independent RISC controllers for Fast Ethernet, HDLC/TDM, ATM, I2C, SPI, and USB, allowing wire-speed packet processing without CPU intervention. The integrated SEC engine performs DES, 3DES, AES, SHA-1, and MD5 in hardware, eliminating software-encryption bottlenecks in VPN and IPsec gateways.
Typical applications include small-to-medium enterprise routers, DSLAM line cards, industrial Ethernet gateways, wireless base station controllers, and IPsec/VPN acceleration. The 0C to 105C operating range supports industrial networking equipment deployed in uncontrolled environments.
When designing with the MPC8272VRMIBA, allocate generous power and ground planes around the 516-ball BGA to manage core current transients, follow the DDR/SDRAM routing rules in the hardware specification, and use a JTAG-controlled BDM/BDI debugger for low-level bring-up. This part is in NXP's EOL/end-of-life pipeline per the NXP product page, so design wins should be qualified against current lifecycle status and last-time-buy windows before committing to new production.
直接替换替代料： MPC8272VRMIBA ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MPC8272VRMIBA （相同外形与封装尺寸） ——差异在于 Operating Temperature, Package, Process Technology, PCI Interface, Core Architecture.
快速对比工具——选择替代料号进行并排对比：
MPC8272CVRMIBA
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$62.8 / 个
查看数据手册 →MPC8271VRMIBA
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$53.4 / 个
查看数据手册 →MPC8270VRMIBA
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$95.75 / 个
查看数据手册 →MPC8272VRMIB
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MPC8280VRMIBA
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MPC8272VRMIBA 最大额定值与电气特性
| Processor Family | PowerQUICC II (MPC82xx) |
| Core Architecture | PowerPC G2_LE, 32-bit |
| Maximum Core Frequency | 266 MHz |
| Performance | 505.4 MIPS |
| Process Technology | 0.13 um CMOS |
| Core Voltage | 1.5 V |
| I/O Voltage | 3.3 V |
| 工作温度 | 0C to 105C |
| 封装 | 516-PBGA (TEBGA) 27 x 27 mm |
| L1 Instruction Cache | 16 Kbyte |
| L1 Data Cache | 16 Kbyte |
| Integrated Security Engine (SEC) | Yes (DES/3DES/AES/SHA-1/MD5) |
| PCI Interface | 32-bit, 66 MHz |
| USB Interface | USB 1.1 host/slave |
| UTOPIA Interface | UTOPIA-II (ATM/PHY) |
| Ethernet MAC | Dual 10/100 Mbps (via CPM) |
| 安装类型 | Surface Mount (BGA) |
| MSL 等级 | 3 (per Partstack data) |
| Lead-Free / RoHS | Lead Free, RoHS Compliant |
| Packaging | Tray |
MPC8272VRMIBA 引脚配置
| 引脚 A1 | VDD_CORE — 1.5 V core supply |
| 引脚 B12 | VDD_IO — 3.3 V I/O supply |
| 引脚 C13 | GND — Ground reference |
| 引脚 D14 | PCI_AD[0] — PCI address/data bus bit 0 |
| 引脚 E15 | PCI_FRAME — PCI cycle frame |
| 引脚 F16 | PCI_CLK — PCI bus clock input |
| 引脚 G17 | UTOPIA_DATA[0] — UTOPIA-II data bit 0 |
| 引脚 H18 | UTOPIA_CLK — UTOPIA-II clock |
| 引脚 J19 | USB_DP — USB 1.1 data plus |
| 引脚 K20 | USB_DM — USB 1.1 data minus |
| 引脚 L21 | ETH_TXD[0] — Ethernet MAC 0 transmit data |
| 引脚 M22 | ETH_RXD[0] — Ethernet MAC 0 receive data |
| 引脚 N23 | ETH_TXD[1] — Ethernet MAC 1 transmit data |
| 引脚 P24 | ETH_RXD[1] — Ethernet MAC 1 receive data |
| 引脚 R25 | MDC — MII management clock |
| 引脚 T26 | MDIO — MII management data |
| 引脚 AB4 | TDM_TXD — TDM transmit data (CPM) |
| 引脚 AB6 | TDM_RXD — TDM receive data (CPM) |
| 引脚 AC15 | BR — Boot reset / configuration |
| 引脚 AD16 | PORESET — Power-on reset input |
| 引脚 AE17 | HRESET — Hard reset output |
| 引脚 AF18 | TRST — JTAG test reset |
| 引脚 AG19 | TCK — JTAG test clock |
| 引脚 AH20 | TMS — JTAG test mode select |
| 引脚 AJ21 | TDI — JTAG test data in |
| 引脚 AK22 | TDO — JTAG test data out |
典型应用
MPC8272VRMIBA 适用于 6 应用s: SME / Branch-Office Router, DSLAM Line Card / Access Concentrator, Industrial Ethernet Gateway / Protocol Bridge, Wireless Base Station Controller, IPsec / VPN Gateway Appliance, Network Attached Storage (NAS) Controller.
SME / Branch-Office Router
The MPC8272VRMIBA's 505.4 MIPS at 266 MHz, dual 10/100 Ethernet MACs, 32-bit PCI, and hardware SEC engine make it well-suited for small-to-medium enterprise routers. The CPM offloads packet forwarding, while the G2_LE core runs the routing stack (Linux, VxWorks, or NetBSD) plus IPsec / IKE acceleration via SEC. Power consumption at 1.5 V core is moderate enough for fanless desktop-router enclosures, and the 0C-to-105C rating covers SOHO and indoor industrial deployments.
推荐
DSLAM Line Card / Access Concentrator
In DSLAM access equipment, the MPC8272VRMIBA's UTOPIA-II interface gluelessly connects to multi-channel ADSL2+/VDSL2 PHY framer chips, while the CPM's TDM channels aggregate ATM and packet traffic. The integrated SEC engine handles subscriber authentication and IPsec tunneling for carrier-grade deployments. The 516-PBGA's 27 x 27 mm footprint fits standard ATCA/AdvancedTMC line-card form factors, and the part's 3.3 V I/O simplifies interfacing to legacy TDM framers.
推荐
Industrial Ethernet Gateway / Protocol Bridge
Factory-floor protocol converters translating Modbus TCP, PROFINET, EtherNet/IP, and serial fieldbuses benefit from the MPC8272VRMIBA's dual Ethernet MACs, USB 1.1 host for diagnostic peripherals, and PCI expansion for industrial I/O cards. The 0C-to-105C temperature window supports deployment in cabinets near motors and drives. The CPM's SCCs can be reconfigured as UARTs or HDLC channels for legacy RS-485 / RS-232 conversion, eliminating external bridges.
推荐
Wireless Base Station Controller
In 2G/3G base-station controllers and small-cell Node-B platforms, the MPC8272VRMIBA acts as the main control-plane processor. The CPM's TDM channels terminate Abis/Iub links, the SEC engine accelerates encryption of backhaul traffic, and the PCI bus connects to DSP arrays for baseband processing. The 0.13 um CMOS process keeps active power below 2 W at 266 MHz, suiting sealed outdoor enclosures with passive cooling.
推荐
IPsec / VPN Gateway Appliance
The integrated SEC engine on the MPC8272VRMIBA performs DES, 3DES, AES, SHA-1, and MD5 entirely in hardware, achieving several hundred Mbps of IPsec throughput without burdening the G2_LE core. Combined with 505 MIPS of general-purpose processing, the part can sustain a small-site VPN gateway (10-50 tunnels) at wire speed. Its 32-bit/66 MHz PCI bus accommodates additional crypto accelerators if even higher throughput is needed.
推荐
Network Attached Storage (NAS) Controller
Entry-level NAS controllers use the MPC8272VRMIBA's PCI bus to attach SATA or SCSI controllers, while the G2_LE core runs a lightweight NAS stack and the CPM handles network I/O. The 516-PBGA package and 1.5 V core allow compact 1U enclosures with passive heatsinks. Dual Ethernet MACs support link aggregation for higher throughput, and the integrated SEC engine protects at-rest data with hardware AES-XTS where supported by the storage stack.
推荐
推荐产品汇总
工程参考数据： MPC8272VRMIBA ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MPC8272CVRMIBA | MPC8271VRMIBA | MPC8270VRMIBA | MPC8272VRMIB | MPC8280VRMIBA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 516-PBGA 27x27 mm | 516-PBGA 27x27 mm (same) | 516-PBGA 27x27 mm (same) | 516-PBGA 27x27 mm (same) | 516-PBGA 27x27 mm (same) | 516-PBGA 27x27 mm (same) |
| Core Frequency | 266 MHz | 266 MHz | 266 MHz | 266 MHz | 266 MHz | 450 MHz (+69%) |
| Performance (MIPS) | 505.4 MIPS | 505.4 MIPS | 505.4 MIPS | 505.4 MIPS | 505.4 MIPS | ~855 MIPS |
| Integrated Security Engine | Yes (SEC) | Yes (SEC) | No (replaced by CPM crypto) | No | Yes (SEC) | Yes (SEC) |
| PCI Interface | 32-bit / 66 MHz | 32-bit / 66 MHz | 32-bit / 66 MHz | 32-bit / 66 MHz | 32-bit / 66 MHz | 32-bit / 66 MHz |
| Operating Temperature | 0C to 105C | 0C to 105C | 0C to 105C | 0C to 105C | -40C to 105C | 0C to 105C |
| Lifecycle Status | Last Time Buy (EOL) | Active / NRND (verify) | EOL | EOL | Last Time Buy (EOL) | NRRD / Active (verify) |
关键差异点
- Integrated hardware SEC engine （对比 MPC8271VRMIBA)
- Errata-fixed silicon revision availability （对比 MPC8272VRMIBA (original))
- Industrial temperature drop-in option （对比 MPC8272VRMIB)
- Higher MHz upgrade path within same package （对比 MPC8280VRMIBA)
设计说明
Estimated: The 516-ball PBGA at 1.0 mm pitch demands microvia or via-in-pad escape on inner rows. Use a 4- or 6-layer stackup with continuous GND planes under the BGA, and follow NXP's BGA escape pattern in the MPC8272 hardware specifications. Length-match the 60x bus within +/-25 mil and the DDR-style SDRAM clock to within +/-20 ps to meet setup/hold budgets at 133 MHz.
Estimated: At 266 MHz with 1.5 V core and 3.3 V I/O, the MPC8272VRMIBA typically draws 0.9-1.1 A core current. Decouple the 1.5 V rail with 22 uF bulk plus 0.1 uF + 1 nF ceramic per VDD_CORE ball group. Place bulk capacitors on the PCB bottom side directly under the BGA for minimum loop inductance. The PORESET signal must remain low until both supplies are stable for at least 100 us.
Use at least a 1 square-inch copper pour on the top layer beneath the BGA, plus thermal vias to inner GND planes, to keep junction temperature within the 105C limit. In sealed enclosures without airflow, derate clock frequency or migrate to the MPC8280 family which has a lower MHz-per-watt figure. Always measure theta_JA on the production PCB rather than relying on the JEDEC test-board number.
Common pitfalls include (1) forgetting to enable the integrated SEC engine in U-Boot before running IPsec, (2) misconfiguring CPM buffer descriptors which corrupts Ethernet under heavy load, and (3) assuming the part is lead-free without checking date code, because early production lots may have lead-bearing terminations. Verify all silicon revisions against the MPC8272CE errata document, particularly for the USB and PCI controllers.
Series-terminate the PCI bus with 33 ohm resistors at the MPC8272 end when traces exceed 2 inches. For UTOPIA-II at 50 MHz, keep data and clock traces length-matched within 1 inch and avoid crossing plane splits. Use a 4-layer stackup with reference planes stitched every lambda/10 around high-speed CPM signals to control EMI on this 0.13 um CMOS device.
合规信息
RoHS compliant and lead-free per DigiKey / DigiChip datasheet; JESD-609 e2 (Tin/Silver) terminal finish; MSL-3 per Partstack listing; AEC-Q100 not applicable (telecom/industrial MPU, not automotive qualified).
