MPC8313ECZQAFFC - PowerQUICC II Pro 333MHz SoC MPU | NXP
料号： MPC8313ECZQAFFC ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $32.28 | $32.28 |
| 10 | $30.67 | $306.70 |
| 100 | $27.44 | $2,744.00 |
| 500 | $24.21 | $12,105.00 |
| 1,000 | $21.3 | $21,300.00 |
MPC8313ECZQAFFC 概述
What is an MPU (Microprocessor Unit)? An MPU is an integrated circuit that contains a CPU core and integrated peripherals such as memory controllers and communications interfaces. The PowerQUICC family is a hierarchy of Power Architecture SoCs from NXP (formerly Freescale), descended from the original PowerQUICC I and PowerQUICC II communications processors used widely in routers, switches, and industrial gateways. The MPC8313 specifically belongs to the MPC83xx sub-family, integrating more peripherals than its predecessors while keeping the classic PowerQUICC architecture for software reuse.
Key features include a single e300c3 core at 333 MHz, 16 KB I-cache and 16 KB D-cache, integrated DDR1/DDR2 memory controller supporting up to 256 MB, dual 10/100/1000 Ethernet MACs with TCP/IP acceleration, USB 2.0 high-speed host/device, PCI 2.3 interface, and a hardware Security Engine for DES, 3DES, AES, and MD5/SHA-1 hashing. The 0.95 V to 1.05 V core supply and -40C to +105C industrial temperature range suit industrial and rugged environments.
Technical depth: The MPC8313 uses a 90 nm process and replaces an external Northbridge by integrating the DDR controller, three Fast Ethernet controllers, a PCI controller, and the Security Engine. The QUICC Engine multi-protocol block handles TDM, HDLC, and ATM, making the device well-suited for legacy telecom and industrial control applications. The integrated SEC block offloads cryptographic work from the host CPU.
Typical applications include industrial gateways, wireless LAN access points, multi-function printers, network attached storage, and telecom DSL line cards. The integrated GbE switch fabric and Security Engine make it suitable for VPN, IPsec, and SSL/TLS acceleration in routers and firewalls.
When designing with this device, ensure the 0.95-1.05 V core supply is sequenced before the 1.8 V/2.5 V DDR I/O supply, use impedance-controlled PCB traces for DDR and Gigabit Ethernet, and provide adequate decoupling near the BGA balls. Software reuse from the PowerQUICC II Pro family (U-Boot, Linux 2.6, VxWorks BSPs) accelerates development.
This page synthesizes distributor pricing, parametric comparisons, drop-in alternatives, and design considerations not found in the manufacturer datasheet alone.
直接替换替代料： MPC8313ECZQAFFC ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MPC8313ECZQAFFC （相同外形与封装尺寸） ——差异在于 Package, Security Engine, Operating Temperature, RoHS Status, USB.
快速对比工具——选择替代料号进行并排对比：
MPC8313CVRAFFC
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MPC8313EVRAGDA
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MPC8313ECVRAGDA
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MPC8313ECZQAFFB
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$28.4 / 个
查看数据手册 →MPC8313EVRAGDC
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$31.5 / 个
查看数据手册 →MPC8313ECZQAFFC 最大额定值与电气特性
| Processor Type | PowerPC e300c3 |
| Series | PowerQUICC II Pro, MPC83xx |
| Core Count | 1 |
| Bit Width | 32-Bit |
| Clock Speed | 333 MHz |
| Core Voltage | 0.95 V to 1.05 V |
| 工作温度 | -40C to +105C |
| 封装 | 516-TEPBGA (27x27 mm) |
| 安装类型 | Surface Mount |
| Memory Controller | DDR1/DDR2, up to 256 MB |
| L1 Cache | 16 KB I-Cache, 16 KB D-Cache |
| Ethernet | 2x 10/100/1000 MAC (Gigabit) |
| USB | USB 2.0 High-Speed (Host/Device) |
| PCI | PCI 2.3 |
| Security Engine | SEC (DES/3DES/AES/MD5/SHA-1) |
| RoHS 状态 | Compliant |
MPC8313ECZQAFFC 516-tepbga (27x27 mm) 引脚配置指南
MPC8313ECZQAFFC（516-tepbga (27x27 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MPC8313ECZQAFFC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MPC8313ECZQAFFC 适用于 7 应用s: Industrial Network Gateway, Wireless LAN Access Point, Multi-Function Printer Controller, Network Attached Storage, Telecom DSL Line Card, VPN / Firewall Appliance, Embedded Industrial Controller.
Industrial Network Gateway
The MPC8313ECZQAFFC suits industrial network gateways because its dual Gigabit Ethernet MACs with integrated TCP/IP acceleration provide line-rate forwarding for multiple LAN segments, while the QUICC Engine handles serial protocols (TDM/HDLC) for legacy fieldbus interfaces. The hardware Security Engine offloads DES/3DES/AES and SHA-1/MD5 from the e300c3 core, enabling IPsec and SSL/TLS at gigabit rates with the 333 MHz CPU focused on routing and management. Industrial -40C to +105C operation supports deployment in factory cabinets, substation gateways, and outdoor cellular backhaul. The DDR1/DDR2 controller with up to 256 MB accommodates Linux-based routing stacks and OpenWrt firmware.
推荐
Wireless LAN Access Point
In WLAN access points the MPC8313ECZQAFFC serves as the host CPU managing the 802.11 MAC/PHY subsystem over PCI, with USB 2.0 high-speed attaching a Bluetooth/Wi-Fi coexistence radio or storage controller. The integrated Gigabit Ethernet provides the wired uplink, and the QUICC Engine supports legacy T1/E1 backhaul for carrier-grade APs. DDR1/DDR2 with up to 256 MB supports OpenWrt, Linux wireless drivers, and CAPWAP/control-plane firmware. The 333 MHz e300c3 core combined with hardware crypto acceleration delivers enterprise-class WPA2-Enterprise throughput without loading the CPU with encryption work.
推荐
Multi-Function Printer Controller
The MPC8313ECZQAFFC provides the main controller logic for multi-function printers, with PCI attaching image-processor ASICs and Gigabit Ethernet providing gigabit-class print and scan data transfer. USB 2.0 high-speed offers direct-connect PC interfaces for walk-up printing/scanning, and the DDR1/DDR2 controller with up to 256 MB supports large image buffers for high-resolution scanning and RIP processing. The 0.95 V to 1.05 V core supply and industrial -40C to +105C temperature rating suit compact printer chassis with limited airflow. The Security Engine enables secure print release and document confidentiality features.
推荐
Network Attached Storage
For entry-level Network Attached Storage, the MPC8313ECZQAFFC combines Gigabit Ethernet throughput and PCI expansion to attach SATA controllers or RAID HBAs, while the DDR1/DDR2 controller with up to 256 MB supports common NAS OS images including custom Linux distributions. The hardware crypto offload enables encrypted volumes (LUKS, SMB3 encryption) at near line-rate without overloading the 333 MHz CPU. USB 2.0 high-speed supports external backup drives. The industrial temperature grade allows fanless NAS chassis designs in office settings.
推荐
Telecom DSL Line Card
In DSL line cards the MPC8313ECZQAFFC's QUICC Engine provides multi-protocol TDM and HDLC channelization for legacy T1/E1 and ADSL backhaul, while the Gigabit Ethernet uplinks aggregate subscriber traffic to the central office switch. The 333 MHz e300c3 core runs the DSLAM control firmware and IGMP/multicast processing, with DDR1/DDR2 up to 256 MB supporting subscriber session tables. The integrated Security Engine accelerates per-subscriber authentication and IPsec tunnels. Industrial -40C to +105C operation supports outdoor DSLAM cabinets with minimal thermal headroom.
推荐
VPN / Firewall Appliance
The MPC8313ECZQAFFC is well suited to small/medium-business VPN and firewall appliances where the integrated Security Engine (DES/3DES/AES, SHA-1/MD5) delivers gigabit IPsec throughput without external crypto ASICs. The dual Gigabit Ethernet MACs provide WAN and LAN interfaces, and the QUICC Engine's multi-protocol block supports legacy serial VPNs over TDM. With DDR1/DDR2 supporting up to 256 MB of rule tables and connection state, the 333 MHz e300c3 core focuses on packet forwarding. Industrial -40C to +105C operation tolerates the confined chassis of branch-office security appliances.
推荐
Embedded Industrial Controller
For embedded industrial controllers the MPC8313ECZQAFFC provides PowerPC e300c3 processing with fieldbus connectivity via the QUICC Engine (TDM/HDLC/ATM), Gigabit Ethernet for SCADA uplinks, and PCI for I/O expansion. The 0.95 V to 1.05 V core supply and industrial -40C to +105C temperature range support factory-floor deployment. DDR1/DDR2 up to 256 MB supports real-time extensions (RT Linux, VxWorks) and complex motion-control algorithms. The Security Engine protects IP for proprietary control protocols and remote firmware updates.
推荐
推荐产品汇总
工程参考数据： MPC8313ECZQAFFC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MPC8313CVRAFFC | MPC8313EVRAGDA | MPC8313ECVRAGDA | MPC8313ECZQAFFB | MPC8313EVRAGDC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 516-TEPBGA (27x27 mm) | 516-TEPBGA (27x27 mm) | 516-TEPBGA (27x27 mm) | 516-TEPBGA (27x27 mm) | 516-TEPBGA (27x27 mm) | 516-TEPBGA (27x27 mm) |
| Core | PowerPC e300c3 | PowerPC e300c3 | PowerPC e300c3 | PowerPC e300c3 | PowerPC e300c3 | PowerPC e300c3 |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Core Voltage | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V |
| Memory Controller | DDR1/DDR2 up to 256 MB | DDR1/DDR2 up to 256 MB | DDR1/DDR2 up to 256 MB | DDR1/DDR2 up to 256 MB | DDR1/DDR2 up to 256 MB | DDR1/DDR2 up to 256 MB |
| Security Engine | SEC (DES/3DES/AES/MD5/SHA-1) | SEC (DES/3DES/AES/MD5/SHA-1) | SEC (DES/3DES/AES/MD5/SHA-1) | SEC (DES/3DES/AES/MD5/SHA-1) | SEC (DES/3DES/AES/MD5/SHA-1) | SEC (DES/3DES/AES/MD5/SHA-1) |
| RoHS | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
关键差异点
- Integrated Security Engine offloads AES/SHA from CPU （对比 MPC8323E)
- Lowest-cost PowerQUICC II Pro with integrated SEC （对比 MPC8349E)
- Wide -40C to +105C industrial temperature （对比 MPC8313EVRAGDA)
设计说明
Power sequencing: the MPC8313ECZQAFFC requires the core supply (0.95-1.05 V) to ramp before or simultaneously with the DDR I/O (1.8 V DDR2 or 2.5 V DDR1). Reverse sequencing can forward-bias internal ESD diodes and damage the device. Use the NXP-recommended ordering with a common NXP/MPC83xx power sequencer IC or discrete FET circuits. Estimated: each rail should ramp within 100 ms with monotonic edges; total inrush is dominated by DDR bulk capacitors.
BGA layout: the 516-TEPBGA 27x27 mm package uses 1.27 mm or 1.0 mm ball pitch (verify exact pitch from NXP package drawing). Use microvia-in-pad or dog-bone fanout to break out the inner balls. Match trace lengths within 100 mils for DDR signals and follow the NXP MPC8313EC hardware design checklist for DDR termination (typically VTT at half VDDQ via NXP DDR termination regulator).
The MPC8313ECZQAFFC's power consumption depends on CPU load, DDR activity, and peripheral enable states. Estimated: at 333 MHz full CPU load and active Gigabit Ethernet, total power is approximately 2.5-3.5 W. The TEPBGA package relies on PCB copper for heat dissipation; design 4-6 inner ground planes stitched with thermal vias under the die to keep junction temperature below 105C at industrial operating temperatures.
Do not omit the 32.768 kHz RTC reference or the 66 MHz system clock source - these are required for the integrated security engine and DDR PLL lock. Ensure JTAG pins are accessible for boundary-scan and code development; route them to a 14-pin header per NXP's standard. Verify PCIe/PCI clock reference frequency matches the chosen mode (33 MHz vs 66 MHz) in the reset configuration words.
Gigabit Ethernet MACs require impedance-controlled PCB traces (100 ohm differential for GMII/RGMII, 50 ohm single-ended for MII). Place the magnetics within 25 mm of the PHY RJ-45 connector and route MII traces length-matched to within 50 mils to minimize skew. Use the integrated GMII rather than external MII where possible to reduce pin count and BOM cost.
合规信息
RoHS compliant per NXP product page; 'E' character in MPN designates lead-free RoHS package option. Not AEC-Q100 qualified (industrial temp grade, not automotive).