MSP430F5358IPZ - 20MHz 384KB Mixed-Signal MCU | Texas Instruments
料号: MSP430F5358IPZ ✓ 量产中MSP430F5358IPZ 概述
A mixed-signal microcontroller is a semiconductor that integrates digital processing with analog input or output functions. Within the hierarchy of embedded systems, the MSP430F5358 belongs to the microcontroller family of processors and sits below the broader category of embedded semiconductors. Its combination of a 16-bit RISC core, on-chip converters, DMA, and serial interfaces allows one device to control digital logic while acquiring and producing analog signals without requiring several separate interface components.
The principal features include a maximum clock frequency of 20 MHz, 384 KB of programmable Flash, 34 KB of data SRAM, and 12-bit resolution for both the ADC and DAC. The device also provides UART, SPI, and I²C interfaces, plus a comparator and DMA. These resources make the MCU suitable for industrial instrumentation, sensor acquisition, motor and power-system control, communications equipment, and embedded data-acquisition systems where a 100-pin package provides substantial I/O capacity.
The MSP430 CPU architecture uses a 16-bit RISC design with a reduced instruction set tailored to embedded control. The mixed-signal resources allow sampled analog data to be processed locally, while DMA can move data between peripherals and SRAM without involving the central processing unit on every transfer. This architecture is useful in systems that need deterministic peripheral interaction, low-latency control, and a compact combination of analog and digital functions on a single board.
The 100-LQFP package exposes 74 I/Os, making the MSP430F5358 suitable for systems that need numerous external connections, such as display interfaces, control signals, communications ports, and analog front ends. Its -40°C to +85°C industrial-temperature rating also supports use across industrial equipment, although final product qualification must consider the complete system enclosure, power behavior, and environmental stress.
PCB implementation should preserve the analog and digital return paths specified in the manufacturer layout guidance. Place the MCU decoupling capacitors close to the supply pins, keep sensitive analog inputs away from fast-switching nodes, and use continuous ground planes where practical. The 100-pin package also requires careful fanout because its high pin count and fine pitch can complicate assembly, rework, and high-speed signal routing.
This page combines manufacturer specifications, package and lifecycle information, interface-focused application guidance, and same-family replacement analysis. It also identifies practical selection constraints involving Flash memory, SRAM, analog converter resolution, pin count, and package compatibility so engineers can determine whether a board redesign is required before changing device type.
直接替换替代料: MSP430F5358IPZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
MSP430F5356IPZ
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MSP430F5357IPZ
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MSP430F5359IPZ
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MSP430F5358IPZ 最大额定值与电气特性
| Product Type | 16-bit mixed-signal microcontroller |
| Manufacturer | Texas Instruments |
| CPU Architecture | MSP430 CPUXV2, 16-bit RISC |
| 最大时钟频率 | 20 MHz |
| Flash Memory | 384 KB (384K x 8) |
| SRAM | 34 KB |
| 数据总线宽度 | 16 bit |
| ADC Resolution | 12 bit |
| DAC Resolution | 12 bit |
| Comparator | Integrated |
| Direct Memory Access | DMA |
| Serial Interfaces | UART, SPI, and I²C |
| Number of I/Os | 74 I/O |
| 封装 | 100-LQFP (14 x 14 mm) |
| Terminal Count | 100 pins |
| 安装类型 | Surface Mount |
| 工作温度 | -40°C to +85°C |
MSP430F5358IPZ 100-lqfp (14 x 14 mm) 引脚配置指南
MSP430F5358IPZ(100-lqfp (14 x 14 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: MSP430F5358IPZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MSP430F5358IPZ 适用于 6 应用s: Industrial Sensor Acquisition, Precision Data Acquisition, Motor and Power-System Control, Communication Equipment, Test and Measurement Instruments, LED and Lighting Control.
Industrial Sensor Acquisition
The MSP430F5358IPZ fits industrial sensor acquisition because its 12-bit ADC, 34 KB of SRAM, and 20 MHz MSP430 CPUXV2 core can sample and process multiple analog channels locally. The 74 available I/Os provide connections for sensors, conditioning stages, and digital control signals, while DMA reduces CPU intervention during transfers. Its -40°C to +85°C operating range suits industrial equipment. Designers should verify source impedance, acquisition time, reference accuracy, and analog-layout isolation for the selected sensor network.
推荐
Precision Data Acquisition
The MSP430F5358IPZ supports compact precision data-acquisition systems by combining a 12-bit ADC and 12-bit DAC with 384 KB of Flash and 34 KB of SRAM. Firmware can maintain calibration tables, filter sampled data, and expose results through UART, SPI, or I²C without a separate host processor. The 100-LQFP package leaves 74 I/Os for external references, multiplexers, and control signals. For laboratory or industrial instrumentation, evaluate input bandwidth and reference stability before fixing the measurement front end.
推荐
Motor and Power-System Control
The MSP430F5358IPZ is suitable for embedded motor and power-system control because the 20 MHz CPU, DMA, comparator, and 12-bit ADC can supervise analog feedback while coordinating real-time control outputs. Its 74 I/Os can support pulse-width-modulated actuators, gate-driver enables, fault inputs, and communications links. The industrial temperature range supports equipment outside room-temperature conditions. Designers should calculate control-loop timing, use the ADC and comparator with suitable isolation, and verify that switching-node layout does not corrupt current or voltage measurements.
推荐
Communication Equipment
MSP430F5358IPZ can serve as the supervisory controller in communication equipment where local configuration, monitoring, and serial connectivity must coexist with analog measurement. UART, SPI, and I²C permit connection to transceivers, memory, sensors, and service interfaces, while 384 KB of Flash provides room for protocol handlers and configuration data. The 100-pin package offers substantial control connectivity. Firmware should use DMA where appropriate and apply the manufacturer's recommended clock, reset, and decoupling layout.
推荐
Test and Measurement Instruments
The MSP430F5358IPF fits compact test and measurement instruments that combine signal generation, acquisition, calibration, and a local communications interface. Its 12-bit DAC can generate controllable analog test signals, the 12-bit ADC can acquire the response, and DMA supports efficient data movement. The 20 MHz CPU and 34 KB of SRAM are useful for filtering and control firmware, while 74 I/Os support front-panel controls and status indicators. Reference accuracy and DAC settling must be included in the instrument error budget.
推荐
LED and Lighting Control
MSP430F5358IPZ can control intelligent LED lighting systems by combining digital timing and communication functions with analog monitoring. The 20 MHz core handles dimming sequences, fault management, and serial configuration, while the ADC and comparator can monitor current or supply conditions. The 74 I/Os provide enough connections for multiple channels, sensors, and communication transceivers. Layout must keep high-current LED paths separate from analog sensing, and firmware should include open-load, overcurrent, and thermal recovery behavior.
推荐
推荐产品汇总
工程参考数据: MSP430F5358IPZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MSP430F5356IPZ | MSP430F5357IPZ | MSP430F5359IPZ |
|---|---|---|---|---|
| Package | 100-LQFP (PZ) | 100-LQFP (PZ) | 100-LQFP (PZ) | 100-LQFP (PZ) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| CPU Architecture | MSP430 CPUXV2, 16-bit RISC | MSP430 CPUXV2, 16-bit RISC | MSP430 CPUXV2, 16-bit RISC | MSP430 CPUXV2, 16-bit RISC |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| ADC Resolution | 12 bit | 12 bit | 12 bit | 12 bit |
| DAC Resolution | 12 bit | 12 bit | 12 bit | 12 bit |
| Number of I/Os | 74 I/O | 74 I/O | 74 I/O | 74 I/O |
| Direct Memory Access | DMA | DMA | DMA | DMA |
| Serial Interfaces | UART, SPI, and I²C | UART, SPI, and I²C | UART, SPI, and I²C | UART, SPI, and I²C |
关键差异点
- Largest Flash configuration in the proposed same-family comparison (对比 MSP430F5357IPZ)
- Higher memory headroom for mixed-signal firmware (对比 MSP430F5356IPZ)
- Substantial parallel I/O capacity in a single mixed-signal device (对比 MSP430F5359IPZ)
设计说明
Route the 100-pin LQFP footprint and power architecture to the manufacturer's package drawing and pin-description tables. Place every required bypass capacitor at the associated supply pins with short ground returns, and provide a continuous ground reference beneath the device where the layout pattern permits. With 74 I/Os, maintain consistent escape routing and avoid long parallel segments that can increase coupling into adjacent analog or control signals.
Preserve the separation between sensitive analog inputs and digital switching activity. Keep the ADC and comparator paths short, use a quiet analog reference region, and avoid routing analog inputs beneath high-current outputs or clock-dense logic. Validate the final board with an oscilloscope because the 12-bit converter does not by itself prevent interference caused by poor grounding, reference impedance, or source-impedance mismatch.
Confirm the complete input-voltage range, I/O voltage limits, and internal supply requirements from the Texas Instruments datasheet before selecting regulators or external pull-ups. The lower supply limit is identified as 1.8 V, but the complete operating range must be verified for the selected clock and temperature conditions. Sequence sensitive rails if the system uses multiple supplies and prevent powered peripherals from back-feeding an unpowered MCU.
Do not treat the MSP430F5356IPZ or MSP430F5357IPZ as automatic software-compatible replacements for MSP430F5358IPZ. Their Flash capacities differ, and device selection can also affect linker placement, peripheral availability, interrupt behavior, and board configuration. Rebuild or validate the firmware for the exact replacement and compare every pin, supply, clock, reset, and bootloader requirement before production use.
合规信息
The manufacturer identifies MSP430F5358IPZ as an industrial-temperature part rated from -40°C to +85°C. No RoHS, REACH, halogen-free, lead-free, conflict-minerals, or AEC-Q100 statement was identified, so these attributes remain unknown or unqualified. The -40°C to +85°C industrial rating does not establish automotive qualification.