Texas Instruments

MSP430F5358IPZ - 20MHz 384KB Mixed-Signal MCU | Texas Instruments

MPN: MSP430F5358IPZ ✓ সক্রিয়
100-LQFP (14 x 14 mm) Package 20 MHz Speed 384 KB (384K x 8) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MSP430F5358IPZ সারাংশ

The Texas Instruments MSP430F5358IPZ is a 20 MHz mixed-signal microcontroller with 384 KB of Flash memory, 34 KB of SRAM, a 12-bit ADC, a 12-bit DAC, and 74 I/Os in a 100-pin LQFP package. It operates across the industrial temperature range of -40°C to +85°C and combines an MSP430 16-bit CPU with analog conversion, comparison, and direct-memory-access functions.

A mixed-signal microcontroller is a semiconductor that integrates digital processing with analog input or output functions. Within the hierarchy of embedded systems, the MSP430F5358 belongs to the microcontroller family of processors and sits below the broader category of embedded semiconductors. Its combination of a 16-bit RISC core, on-chip converters, DMA, and serial interfaces allows one device to control digital logic while acquiring and producing analog signals without requiring several separate interface components.

The principal features include a maximum clock frequency of 20 MHz, 384 KB of programmable Flash, 34 KB of data SRAM, and 12-bit resolution for both the ADC and DAC. The device also provides UART, SPI, and I²C interfaces, plus a comparator and DMA. These resources make the MCU suitable for industrial instrumentation, sensor acquisition, motor and power-system control, communications equipment, and embedded data-acquisition systems where a 100-pin package provides substantial I/O capacity.

The MSP430 CPU architecture uses a 16-bit RISC design with a reduced instruction set tailored to embedded control. The mixed-signal resources allow sampled analog data to be processed locally, while DMA can move data between peripherals and SRAM without involving the central processing unit on every transfer. This architecture is useful in systems that need deterministic peripheral interaction, low-latency control, and a compact combination of analog and digital functions on a single board.

The 100-LQFP package exposes 74 I/Os, making the MSP430F5358 suitable for systems that need numerous external connections, such as display interfaces, control signals, communications ports, and analog front ends. Its -40°C to +85°C industrial-temperature rating also supports use across industrial equipment, although final product qualification must consider the complete system enclosure, power behavior, and environmental stress.

PCB implementation should preserve the analog and digital return paths specified in the manufacturer layout guidance. Place the MCU decoupling capacitors close to the supply pins, keep sensitive analog inputs away from fast-switching nodes, and use continuous ground planes where practical. The 100-pin package also requires careful fanout because its high pin count and fine pitch can complicate assembly, rework, and high-speed signal routing.

This page combines manufacturer specifications, package and lifecycle information, interface-focused application guidance, and same-family replacement analysis. It also identifies practical selection constraints involving Flash memory, SRAM, analog converter resolution, pin count, and package compatibility so engineers can determine whether a board redesign is required before changing device type.

এর জন্য ড্রপ-ইন বিকল্প MSP430F5358IPZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

MSP430F5356IPZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 100-LQFP (PZ)
Uses less Flash memory than MSP430F5358IPZ while retaining the 20 MHz MSP430F535x architecture and 100-LQFP footprint

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MSP430F5357IPZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 100-LQFP (PZ)
Uses less Flash memory than MSP430F5358IPZ while retaining the 20 MHz MSP430F535x architecture and 100-LQFP footprint

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MSP430F5359IPZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 100-LQFP (PZ)
Uses more Flash memory than MSP430F5358IPZ while retaining the 20 MHz MSP430F535x architecture and 100-LQFP footprint

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MSP430F5358IPZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 16-bit mixed-signal microcontroller
Manufacturer Texas Instruments
CPU Architecture MSP430 CPUXV2, 16-bit RISC
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 20 MHz
Flash Memory 384 KB (384K x 8)
SRAM 34 KB
ডেটা বাস প্রস্থ 16 bit
ADC Resolution 12 bit
DAC Resolution 12 bit
Comparator Integrated
Direct Memory Access DMA
Serial Interfaces UART, SPI, and I²C
Number of I/Os 74 I/O
প্যাকেজ 100-LQFP (14 x 14 mm)
Terminal Count 100 pins
মাউন্টিং টাইপ Surface Mount
অপারেটিং তাপমাত্রা -40°C to +85°C

MSP430F5358IPZ 100-lqfp (14 x 14 mm) পিন কনফিগারেশন গাইড

MSP430F5358IPZ (100-lqfp (14 x 14 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

MSP430F5358IPZ-এর জন্য 100-lqfp (14 x 14 mm) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MSP430F5358IPZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MSP430F5358IPZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Acquisition, Precision Data Acquisition, Motor and Power-System Control, Communication Equipment, Test and Measurement Instruments, LED and Lighting Control.

🏭

Industrial Sensor Acquisition

The MSP430F5358IPZ fits industrial sensor acquisition because its 12-bit ADC, 34 KB of SRAM, and 20 MHz MSP430 CPUXV2 core can sample and process multiple analog channels locally. The 74 available I/Os provide connections for sensors, conditioning stages, and digital control signals, while DMA reduces CPU intervention during transfers. Its -40°C to +85°C operating range suits industrial equipment. Designers should verify source impedance, acquisition time, reference accuracy, and analog-layout isolation for the selected sensor network.

📟

Precision Data Acquisition

The MSP430F5358IPZ supports compact precision data-acquisition systems by combining a 12-bit ADC and 12-bit DAC with 384 KB of Flash and 34 KB of SRAM. Firmware can maintain calibration tables, filter sampled data, and expose results through UART, SPI, or I²C without a separate host processor. The 100-LQFP package leaves 74 I/Os for external references, multiplexers, and control signals. For laboratory or industrial instrumentation, evaluate input bandwidth and reference stability before fixing the measurement front end.

⚡

Motor and Power-System Control

The MSP430F5358IPZ is suitable for embedded motor and power-system control because the 20 MHz CPU, DMA, comparator, and 12-bit ADC can supervise analog feedback while coordinating real-time control outputs. Its 74 I/Os can support pulse-width-modulated actuators, gate-driver enables, fault inputs, and communications links. The industrial temperature range supports equipment outside room-temperature conditions. Designers should calculate control-loop timing, use the ADC and comparator with suitable isolation, and verify that switching-node layout does not corrupt current or voltage measurements.

🌐

Communication Equipment

MSP430F5358IPZ can serve as the supervisory controller in communication equipment where local configuration, monitoring, and serial connectivity must coexist with analog measurement. UART, SPI, and I²C permit connection to transceivers, memory, sensors, and service interfaces, while 384 KB of Flash provides room for protocol handlers and configuration data. The 100-pin package offers substantial control connectivity. Firmware should use DMA where appropriate and apply the manufacturer's recommended clock, reset, and decoupling layout.

🧰

Test and Measurement Instruments

The MSP430F5358IPF fits compact test and measurement instruments that combine signal generation, acquisition, calibration, and a local communications interface. Its 12-bit DAC can generate controllable analog test signals, the 12-bit ADC can acquire the response, and DMA supports efficient data movement. The 20 MHz CPU and 34 KB of SRAM are useful for filtering and control firmware, while 74 I/Os support front-panel controls and status indicators. Reference accuracy and DAC settling must be included in the instrument error budget.

💡

LED and Lighting Control

MSP430F5358IPZ can control intelligent LED lighting systems by combining digital timing and communication functions with analog monitoring. The 20 MHz core handles dimming sequences, fault management, and serial configuration, while the ADC and comparator can monitor current or supply conditions. The 74 I/Os provide enough connections for multiple channels, sensors, and communication transceivers. Layout must keep high-current LED paths separate from analog sensing, and firmware should include open-load, overcurrent, and thermal recovery behavior.

What are the key specifications of MSP430F5358IPZ that engineers should know?
The MSP430F5358IPZ is a 20 MHz, 16-bit mixed-signal microcontroller with 384 KB of Flash, 34 KB of SRAM, 12-bit ADC and DAC converters, 74 I/Os, and a 100-pin LQFP package. According to the Texas Instruments MSP430F535x mixed-signal microcontroller datasheet, it also includes a comparator, DMA, UART, SPI, and I²C. These resources support local analog acquisition, deterministic peripheral transfers, and communication-heavy embedded control designs.
What is the operating voltage range of MSP430F5358IPZ?
The MSP430F5358IPZ supports a supply beginning at 1.8 V, while its complete maximum operating voltage must be confirmed in the Texas Instruments datasheet before final circuit design. The manufacturer device page identifies a mixed-signal MSP430F5358 configuration with 20 MHz operation, 384 KB Flash, and 34 KB SRAM. Check the complete power-supply limits and I/O voltage constraints against the chosen regulator and external peripherals.
Where can I download the MSP430F5358IPZ datasheet PDF?
The MSP430F5358IPZ datasheet is available from the official Texas Instruments product page and part-details page for MSP430F5358. The manufacturer identifies the document as the MSP430F665x, MSP430F645x, MSP430F565x, and MSP430F535x mixed-signal microcontrollers datasheet, revision E. Use the manufacturer copy for pin assignments, electrical limits, timing, memory maps, and application guidance.
Where can I find the MSP430F5358IPZ pinout and LQFP-100 assignment?
The MSP430F5358IPZ pin assignment is published in the pin-configuration section of the Texas Instruments mixed-signal microcontroller datasheet. The device uses a 100-LQFP package with 74 I/Os, and the manufacturer identifies package code PZ. Before assigning PCB nets, verify every power, ground, reset, analog, and multiplexed peripheral signal against the current datasheet pin table.
Is MSP430F5358IPZ suitable for analog sensor acquisition?
The MSP430F5358IPZ is suitable for sensor acquisition because it integrates a 12-bit ADC, 12-bit DAC, comparator, DMA, and 34 KB of SRAM. According to the Texas Instruments product description, the 20 MHz mixed-signal architecture can acquire and process data locally. Input bandwidth, acquisition time, reference quality, and source impedance must still be checked against the sensor output and required measurement accuracy.
What communications interfaces does MSP430F5358IPZ provide?
The MSP430F5358IPZ provides UART, SPI, and I²C interfaces according to the Texas Instruments product page. These interfaces support sensor buses, external converters, display controllers, transceivers, and embedded service ports. The 20 MHz CPU and DMA can reduce peripheral-service overhead, while the 100-pin package provides up to 74 I/Os for concurrent control and communication functions.
MSP430F5358IPZ vs MSP430F5357IPZ - which is better for a new design?
Choose the MSP430F5358IPZ when the design benefits from its 384 KB of Flash and the larger memory configuration; choose the MSP430F5357IPZ when its lower-memory configuration is sufficient and more Flash is unnecessary. Both belong to the MSP430F535x family and can share the 100-LQFP footprint, but software memory planning, firmware size, and the exact peripheral configuration must be verified before substitution.
When should I choose MSP430F5358IPZ over MSP430F5356IPZ?
Choose the MSP430F5358IPZ when firmware size, data buffers, or planned code growth make 384 KB of Flash preferable to the lower-memory MSP430F5356IPZ configuration. Both devices are intended for the same mixed-signal MSP430F535x product family, but the memory difference can affect application complexity. Confirm code footprint, startup code, linker placement, and peripheral requirements before making the final choice.
What can replace MSP430F5358IPZ on the same PCB?
MSP430F5356IPZ and MSP430F5357IPZ are the most credible same-family replacements to evaluate because they use the 100-LQFP package and belong to the MSP430F535x mixed-signal family. They are not guaranteed substitutes for firmware already targeting MSP430F5358IPZ. Review memory capacity, peripheral availability, pin multiplexing, clock settings, electrical limits, and board-level timing before approving a replacement.
Is MSP430F5358IPZ the same as MSP430F5358IPZR?
The MSP430F5358IPZ and MSP430F5358IPZR represent the same electrical device configuration in different orderable packaging forms, with IPZR using a reel-oriented shipping format. The suffix must be matched to the assembly method and purchase quantity. For PCB compatibility, the important checks are the 100-LQFP PZ footprint and pinout rather than the orderable shipping suffix.
Where can I buy MSP430F5358IPZ and check its lead time?
Use the Request a Quote form on this page to request MSP430F5358IPZ pricing, stock confirmation, current lead time, and minimum order quantity. Quote confirmation should include the exact MSP430F5358IPZ suffix and the required 100-LQFP package. For production planning, request the manufacturer lifecycle and supply status at the time of the order rather than relying on historical catalog information.
What is the price of MSP430F5358IPZ?
The current MSP430F5358IPZ price and available volume breaks are shown through the Request a Quote form on this page. Quote requests should state the required quantity, package suffix, and destination to obtain an actionable commercial response. Prices and availability can change, so use the quotation associated with the exact MSP430F5358IPZ orderable part number.
Is MSP430F5358IPZ in stock and what is its lead time?
Current MSP430F5358IPZ inventory and lead time should be confirmed through the Request a Quote form on this page. Include the required quantity and whether reels, trays, or another permitted packing method are needed. The manufacturer product page lists the device as MSP430F5358IPZ in the PZ 100-pin LQFP configuration, but real-time availability requires a current supply quotation.
Does MSP430F5358IPZ meet automotive or industrial qualification requirements?
MSP430F5358IPZ is specified for an industrial operating temperature range of -40°C to +85°C, but that rating alone does not establish AEC-Q100 qualification. According to the Texas Instruments part-details information, the specified device is an industrial-temperature 100-pin LQFP part. Automotive production use requires an explicitly automotive-qualified orderable part and the associated quality documentation.
What PCB layout practices are important for MSP430F5358IPZ?
Place supply decoupling close to the MCU power pins, provide a low-impedance ground return, and separate sensitive analog inputs from switching nodes and high-current digital paths. The Texas Instruments mixed-signal MCU datasheet provides the device pin configuration and application guidance. Because MSP430F5358IPZ combines a 20 MHz CPU with a 12-bit ADC, DAC, and comparator, review analog grounding, reference routing, and trace coupling as part of the complete layout.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MSP430F5358IPZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MSP430F5358IPZ when an industrial embedded system needs the 20 MHz MSP430 CPUXV2 core, 384 KB of Flash, 34 KB of SRAM, 12-bit ADC and DAC resolution, 74 I/Os, and UART, SPI, and I²C interfaces in one 100-LQFP device. MSP430F5356IPZ may be preferable when its lower memory capacity is sufficient, while MSP430F5357IPZ can suit designs that do not need the larger Flash configuration. Consider MSP430F5359IPZ when additional Flash is valuable, but verify the exact memory and peripheral configuration. For any substitution, compare pin multiplexing, memory, clock settings, electrical limits, firmware assumptions, and package geometry rather than relying only on the family name.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MSP430F5356IPZ MSP430F5357IPZ MSP430F5359IPZ
Package 100-LQFP (PZ) 100-LQFP (PZ) 100-LQFP (PZ) 100-LQFP (PZ)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
CPU Architecture MSP430 CPUXV2, 16-bit RISC MSP430 CPUXV2, 16-bit RISC MSP430 CPUXV2, 16-bit RISC MSP430 CPUXV2, 16-bit RISC
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz
ADC Resolution 12 bit 12 bit 12 bit 12 bit
DAC Resolution 12 bit 12 bit 12 bit 12 bit
Number of I/Os 74 I/O 74 I/O 74 I/O 74 I/O
Direct Memory Access DMA DMA DMA DMA
Serial Interfaces UART, SPI, and I²C UART, SPI, and I²C UART, SPI, and I²C UART, SPI, and I²C

মূল পার্থক্যসমূহ

  • Largest Flash configuration in the proposed same-family comparison (বনামMSP430F5357IPZ)
  • Higher memory headroom for mixed-signal firmware (বনামMSP430F5356IPZ)
  • Substantial parallel I/O capacity in a single mixed-signal device (বনামMSP430F5359IPZ)

ডিজাইন নোট

Route the 100-pin LQFP footprint and power architecture to the manufacturer's package drawing and pin-description tables. Place every required bypass capacitor at the associated supply pins with short ground returns, and provide a continuous ground reference beneath the device where the layout pattern permits. With 74 I/Os, maintain consistent escape routing and avoid long parallel segments that can increase coupling into adjacent analog or control signals.

Preserve the separation between sensitive analog inputs and digital switching activity. Keep the ADC and comparator paths short, use a quiet analog reference region, and avoid routing analog inputs beneath high-current outputs or clock-dense logic. Validate the final board with an oscilloscope because the 12-bit converter does not by itself prevent interference caused by poor grounding, reference impedance, or source-impedance mismatch.

Confirm the complete input-voltage range, I/O voltage limits, and internal supply requirements from the Texas Instruments datasheet before selecting regulators or external pull-ups. The lower supply limit is identified as 1.8 V, but the complete operating range must be verified for the selected clock and temperature conditions. Sequence sensitive rails if the system uses multiple supplies and prevent powered peripherals from back-feeding an unpowered MCU.

Do not treat the MSP430F5356IPZ or MSP430F5357IPZ as automatic software-compatible replacements for MSP430F5358IPZ. Their Flash capacities differ, and device selection can also affect linker placement, peripheral availability, interrupt behavior, and board configuration. Rebuild or validate the firmware for the exact replacement and compare every pin, supply, clock, reset, and bootloader requirement before production use.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer identifies MSP430F5358IPZ as an industrial-temperature part rated from -40°C to +85°C. No RoHS, REACH, halogen-free, lead-free, conflict-minerals, or AEC-Q100 statement was identified, so these attributes remain unknown or unqualified. The -40°C to +85°C industrial rating does not establish automotive qualification.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MSP430F5358IPZ datasheet MSP430F5358IPZ specifications MSP430F5358IPZ pinout MSP430F5358IPZ datasheet pdf MSP430F5358IPZ replacement MSP430F5358IPZ equivalent MSP430F5358IPZ vs MSP430F5357IPZ MSP430F5358IPZ vs MSP430F5356IPZ Texas Instruments MSP430F5358IPZ MSP430F5358IPZ LQFP-100 pinout MSP430F5358IPZ 12-bit ADC DAC MSP430F5358IPZ sensor acquisition MSP430F5358IPZ price MSP430F5358IPZ stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MSP430F5358IPZ MSP430F5358 MSP430F5356IPZ MSP430F5357IPZ MSP430F5359IPZ MSP430 CPUXV2 16-bit RISC mixed-signal microcontroller microcontroller embedded processor semiconductor 12-bit ADC 12-bit DAC comparator direct memory access DMA UART SPI I²C 384 KB Flash 34 KB SRAM 100-LQFP PZ package 74 I/Os
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন