Texas Instruments

MSP430F5525IPN - 25MHz 16-Bit USB MCU | Texas Instruments

料号: MSP430F5525IPN ✓ 量产中
3.6 V Vdss 290 uA/MHz at 8 MHz and 3.0 V Id 80-pin LQFP (PN), 12 mm x 12 mm Package 25 MHz Speed 64 KB Memory
最小起订量: 1 |

MSP430F5525IPN 概述

Texas Instruments MSP430F5525IPN is a 25 MHz, 16-bit mixed-signal microcontroller with 64 KB of flash memory, 4 KB of SRAM, a 12-bit ADC, and USB connectivity in an 80-pin LQFP package. It integrates UART, SPI, I2C, DMA, a comparator, and a hardware multiplier, providing a capable platform for USB-connected control, measurement, and communications systems.

A mixed-signal microcontroller combines a digital processor, analog measurement circuitry, communication peripherals, and embedded memory in one device. The MSP430F5525 belongs to the MSP430 family of ultra-low-power 16-bit processors, which sits within the broader hierarchy of embedded controllers, microcontrollers, and semiconductors. Its integrated peripherals reduce external component count while supporting standalone sensing, control, data acquisition, and USB interface applications.

Core features include a 25 MHz maximum clock, 64 KB of flash program memory, 4 KB of SRAM, a 12-bit analog-to-digital converter, a comparator, direct-memory-access support, and a hardware multiplier. Serial connectivity includes UART, SPI, and I2C interfaces, while the integrated USB capability supports devices that exchange data with a host computer. The manufacturer identifies a low supply-voltage range of 3.6 V, making system-level power planning an important part of the design.

The mixed-signal architecture makes the device appropriate for measurements that must be digitized and then processed locally. Its 12-bit ADC supports analog front-end designs, while the comparator can assist with threshold detection, monitoring, or control functions. DMA can move data between peripherals and system memory with less processor intervention, and the hardware multiplier accelerates suitable arithmetic operations. These resources allow a compact design to combine analog measurement and multiple communication tasks without relying on a separate digital processor.

Typical uses include USB-connected instrumentation, industrial data-acquisition modules, environmental monitoring equipment, portable measurement devices, communication bridges, and embedded control panels. A USB device can use the integrated controller for enumeration and data transfer, while UART, SPI, and I2C provide expansion paths for sensors, displays, transceivers, and external data storage. The 80-pin LQFP also exposes a substantial I/O count for discrete inputs, outputs, and mixed-signal interfaces.

Designers should verify the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before assigning PCB tracks. Decoupling, USB routing, analog grounding, and exposed-pad or thermal requirements must be handled according to the package layout and application reference information. Firmware should also account for clock configuration, memory constraints, USB enumeration behavior, and peripheral-sharing rules when planning system timing.

This page combines manufacturer specifications, package information, application guidance, comparison parameters, and drop-in replacement analysis to support faster engineering review. The MSP430F5525IPN is particularly useful when a design needs 16-bit processing, local analog conversion, several serial interfaces, and USB in a single low-power microcontroller package.

直接替换替代料: MSP430F5525IPN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MSP430F5525UPN

✅ 直接替换 ⚠️ 规格未核验
📦 80-LQFP (PN)
Same 25 MHz, 64 KB flash, 4 KB SRAM, 12-bit ADC, USB, and serial-interface ratings; ordering code differs by 0% in those headline parameters.

📋 参考替代料(不在目录中)

MSP430F5525YPN

✅ 直接替换 ⚠️ 规格未核验
📦 80-LQFP (PN)
Same 25 MHz, 64 KB flash, 4 KB SRAM, 12-bit ADC, USB, and serial-interface ratings; ordering code differs by 0% in those headline parameters.

📋 参考替代料(不在目录中)

MSP430F5525IPN 最大额定值与电气特性

Product Type 16-bit mixed-signal microcontroller (1 count)
最大时钟频率 25 MHz
Flash Program Memory 64 KB
Static RAM 4 KB
ADC Resolution 12 bits
Analog Comparator 1 integrated comparator
DMA Support Yes (1 integrated DMA controller)
UART Interfaces 1 interface
SPI Interfaces 1 interface
I2C Interfaces 1 interface
USB Connectivity Integrated USB device interface (1 interface)
Hardware Multiplier 1 integrated hardware multiplier
Number of I/O Pins 63 pins
电源电压 3.6 V
Active Mode Current 290 uA/MHz at 8 MHz and 3.0 V
封装 80-pin LQFP (PN), 12 mm x 12 mm
安装类型 Surface mount
Processor Architecture MSP430 CPUXV2, 16-bit (1 core)
RoHS 状态 unknown
REACH Status unknown

MSP430F5525IPN 80-pin lqfp (pn), 12 mm x 12 mm 引脚配置指南

MSP430F5525IPN(80-pin lqfp (pn), 12 mm x 12 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

MSP430F5525IPN 的 80-pin lqfp (pn), 12 mm x 12 mm 封装引脚图

暂无详细引脚数据: MSP430F5525IPN.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MSP430F5525IPN 适用于 6 应用s: USB Data-Acquisition Module, Industrial Sensor Gateway, Portable Environmental Monitor, USB Communication Bridge, Precision Control Panel, Embedded Test and Measurement Instrument.

📡

USB Data-Acquisition Module

The MSP430F5525IPN fits USB data-acquisition modules because it combines a 12-bit ADC with a 25 MHz processor, 64 KB flash, 4 KB SRAM, and integrated USB connectivity. The MCU can digitize analog inputs, perform local filtering or scaling, and transfer records to a host without a separate USB interface IC. DMA can support efficient peripheral transfers, while the UART, SPI, and I2C interfaces allow external sensors, memory, or signal-conditioning stages to be added. The principal design constraint is SRAM capacity: applications requiring long capture buffers need external storage or a streaming architecture.

🏭

Industrial Sensor Gateway

The MSP430F5525IPN is appropriate for an industrial sensor gateway that combines local sensing with USB or serial communications. Its 63 I/O pins support discrete sensors and interface signals, while the 12-bit ADC can digitize analog sensor outputs. UART, SPI, and I2C provide flexible links to transceivers, display modules, and external sensors, and the 25 MHz processor can execute protocol and filtering functions. The 64 KB flash supports a substantial embedded application, although production equipment should be qualified against its required temperature, EMC, isolation, and safety conditions.

🧩

Portable Environmental Monitor

A portable environmental monitor can use the MSP430F5525IPN to acquire analog sensor data, apply calibration, and communicate results through USB or a serial link. The 12-bit ADC is suitable for many slow-changing temperature, humidity, gas, or air-quality signals, while the comparator can support threshold-based events. The MSP430 architecture supports low-power operation, and published active-mode consumption is 290 uA/MHz at 8 MHz and 3.0 V. Actual battery life must be calculated from the selected sampling interval, sensor duty cycle, USB attachment state, and sleep-mode configuration.

🌐

USB Communication Bridge

The MSP430F5525IPN can serve as a USB communication bridge between a host computer and external serial equipment. USB handles enumeration and host connectivity, while UART, SPI, and I2C support downstream sensors, transceivers, and memory devices. The 25 MHz 16-bit processor can perform protocol conversion and buffering, and the 64 KB flash provides room for firmware. Firmware development should include USB endpoint planning, baud-rate or peripheral compatibility checks, timeout handling, and a defined recovery path when the host disconnects.

🎛️

Precision Control Panel

The MSP430F5525IPN is well suited to a compact control panel that reads analog controls, drives discrete outputs, and reports status over USB or serial links. Its 63 I/O pins reduce the need for external I/O expanders, while the integrated 12-bit ADC provides a consistent measurement interface. UART, SPI, and I2C can connect a display, memory, or communications transceiver. The 80-pin LQFP provides a generous pin budget, although the PCB should isolate analog inputs appropriately and follow the manufacturer's grounding and decoupling recommendations.

🖥️

Embedded Test and Measurement Instrument

The MSP430F5525IPN can support a compact test and measurement instrument that acquires analog values, controls stimulus, and exports results. The 12-bit ADC handles measurements within its specified operating conditions, the comparator supports threshold or trigger functions, and the hardware multiplier assists suitable arithmetic. USB provides a direct connection to a host for configuration and result export, while SPI and I2C can connect precision converters or displays. Calibration constants and measurement uncertainty should be established using the electrical characteristics and application conditions defined in the manufacturer datasheet.

What is the MSP430F5525IPN?
The MSP430F5525IPN is a 25 MHz, 16-bit mixed-signal microcontroller with 64 KB of flash, 4 KB of SRAM, a 12-bit ADC, and integrated USB. According to the Texas Instruments MSP430F5525 product page and datasheet, the device also includes UART, SPI, I2C, DMA, a comparator, and a hardware multiplier in an 80-pin LQFP package.
What are the key specifications of MSP430F5525IPN that engineers should know?
The principal MSP430F5525IPN specifications are a 25 MHz clock, 64 KB flash memory, 4 KB SRAM, a 12-bit ADC, 63 I/O pins, and a 3.6 V supply-voltage specification. Texas Instruments also identifies integrated USB, UART, SPI, I2C, DMA, a comparator, and a hardware multiplier. The complete configuration is housed in an 80-pin, 12 mm by 12 mm LQFP package.
Where can I download the MSP430F5525IPN datasheet PDF?
The MSP430F5525IPN datasheet is accessible through the official Texas Instruments MSP430F5525 product page at https://www.ti.com/product/MSP430F5525. The page links to the manufacturer datasheet and ordering information. For PCB implementation, use the package drawing, pin table, electrical characteristics, and recommended application circuits from that document rather than relying on a distributor summary.
Where can I find the MSP430F5525IPN pinout and package drawing?
The MSP430F5525IPN pinout is published in the Texas Instruments MSP430F5525 datasheet under the pin attributes and package-information sections. The exact ordering option uses the PN package designation and contains 80 LQFP leads in a 12 mm by 12 mm body. Check the datasheet for alternate-function assignments, power pins, ground pins, analog inputs, and USB connections before laying out the PCB.
What is the MSP430F5525IPN power consumption?
The MSP430F5525IPN consumes 290 uA/MHz during Flash-program execution in active mode at 8 MHz and 3.0 V, according to the published MSP430F5525 data information. Actual system consumption also depends on enabled peripherals, USB activity, clock settings, analog circuitry, and GPIO loading, so the final power budget should be calculated from the operating mode and workload.
Can MSP430F5525IPN be used for USB data acquisition?
Yes, the MSP430F5525IPN is suitable for USB-connected data-acquisition designs because it combines a 12-bit ADC, 64 KB flash, 4 KB SRAM, and an integrated USB interface. It can sample analog inputs and transmit measured data to a host while using UART, SPI, or I2C for external sensors. Firmware must implement USB enumeration and configure the relevant analog and serial peripherals.
When should I choose MSP430F5525IPN for an embedded control design?
Choose the MSP430F5525IPN when a design needs local 16-bit processing, a 12-bit ADC, integrated USB, and multiple serial interfaces in one device. Its 25 MHz clock and 64 KB flash support moderate control and communication workloads, while 4 KB SRAM helps buffer sampled data. It is less suitable when the application requires substantially more flash, RAM, CPU performance, or a different peripheral set.
What is the difference between MSP430F5525IPN and other MSP430F5525 package options?
The MSP430F5525IPN specifically identifies the 80-pin LQFP PN package. Other MSP430F5525 ordering options can differ in package construction, pin count, temperature range, or reel presentation, so they must not be treated as drop-in replacements without checking the ordering table and pin diagrams. Firmware compatibility does not by itself establish PCB or qualification compatibility.
Is MSP430F5525IPN suitable for industrial measurement and control equipment?
The MSP430F5525IPN can support industrial measurement and control functions where its 12-bit ADC, comparator, DMA, serial interfaces, and USB connectivity align with the system requirements. Its MSP430 architecture is suitable for embedded control, but the completed equipment must be evaluated for the required ambient temperature, EMC, isolation, surge, and regulatory conditions.
What is the best drop-in replacement for MSP430F5525IPN?
The best drop-in replacement is the ordering option with the same 80-pin PN footprint, compatible power, clock, memory, and peripheral configuration. The MSP430F5525 family contains ordering variants that may differ in package or qualification, so compatibility must be confirmed against the Texas Instruments ordering information. A request for a validated replacement can be submitted through the Request a Quote form on this page.
Can MSP430F5525IPN replace an equivalent microcontroller from another manufacturer?
A cross-manufacturer MCU should not be assumed to be a drop-in MSP430F5525IPN replacement. Software toolchains, interrupt architecture, memory organization, USB implementation, peripheral multiplexing, and package details can differ even when headline clock and memory specifications look similar. The Request a Quote form on this page can be used to identify a candidate for a detailed pin, firmware, and qualification review.
MSP430F5525IPN versus MSP430F5525IPNR: which ordering option should I use?
MSP430F5525IPNR differs from MSP430F5525IPN primarily in ordering and reel presentation, while retaining the same electrical device and pin arrangement. For prototype work, the non-reel option may be easier to handle; for production assembly, the reel form can fit automated pick-and-place workflows. Confirm the current ordering table and package details before releasing the BOM.
What can replace MSP430F5525IPN?
A valid MSP430F5525IPN replacement must match the 80-pin PN land pattern and preserve the required 25 MHz operation, 3.6 V supply specification, 64 KB flash, 4 KB SRAM, USB, ADC, and serial peripheral functions. Family ordering variants are the first candidates to review, but package and qualification details must be checked. Use the Request a Quote form for availability and replacement review.
How do I get a quote and current lead time for MSP430F5525IPN?
Current commercial terms for MSP430F5525IPN should be requested through the Request a Quote form on this page. Enter the desired quantity, reel or tray packaging requirement, and destination or production schedule in the request. This avoids publishing transient pricing or lead-time information that may change independently of the component's technical specifications.
Is MSP430F5525IPN in stock?
Stock status for MSP430F5525IPN can change by region, quantity, and package form, so the current quantity should be confirmed through the Request a Quote form on this page. Provide the required order quantity and whether the part will be used in prototypes or production. The form returns a direct commercial response without embedding a potentially stale stock claim in the technical documentation.

工程参考数据: MSP430F5525IPN ——对比、设计指导和合规信息。

选型指南

Choose MSP430F5525IPN for a compact USB-enabled design that needs a 12-bit ADC, moderate 16-bit processing, and expandable serial communications. Its 25 MHz clock, 64 KB flash, 4 KB SRAM, DMA, comparator, hardware multiplier, and 63 I/O pins support instrumentation, sensor gateways, and compact control systems without requiring a separate USB controller. MSP430F5525UPN or MSP430F5525YPN may be considered when an ordering option offers the same 80-pin PN interface and matching headline specifications, but the current ordering table must be checked for temperature, qualification, and supply details. Do not select a cross-manufacturer MCU merely from matching clock and memory figures: verify USB behavior, analog characteristics, pin multiplexing, interrupts, memory layout, and firmware support. If the design needs more RAM, flash, CPU speed, or advanced analog performance, move beyond the MSP430F5525 family rather than forcing a footprint-compatible part with reduced functionality.

与替代料对比

参数 本产品 MSP430F5525UPN MSP430F5525YPN
Brand Texas Instruments Texas Instruments Texas Instruments
Package 80-LQFP (PN), 12 mm x 12 mm 80-LQFP (PN) 80-LQFP (PN)
Maximum Clock Frequency 25 MHz 25 MHz 25 MHz
Flash Program Memory 64 KB 64 KB 64 KB
Static RAM 4 KB 4 KB 4 KB
ADC Resolution 12 bits 12 bits 12 bits
Serial Interfaces UART, SPI, and I2C UART, SPI, and I2C UART, SPI, and I2C
USB Connectivity Integrated Integrated Integrated
Number of I/O Pins 63 pins 63 pins 63 pins
Supply Voltage 3.6 V 3.6 V 3.6 V
Analog Comparator Integrated Integrated Integrated
DMA Support Yes Yes Yes

关键差异点

  • Combines USB, mixed-signal conversion, and multiple serial interfaces (对比 MSP430F5525UPN)
  • Provides a complete embedded control and measurement peripheral set (对比 MSP430F5525YPN)
  • Supports USB-connected embedded designs without a separate USB interface controller (对比 Generic non-USB microcontrollers)

设计说明

Assign USB, power, ground, analog-input, and debug connections directly from the MSP430F5525 datasheet pin table and PN-package drawing. Preserve the recommended decoupling capacitors adjacent to their associated supply pins and route sensitive analog inputs away from USB and high-current switching paths. Because alternate functions are multiplexed among package pins, finalize peripheral assignments before committing to the 80-LQFP footprint.

Build the power budget from the operating mode, peripheral load, GPIO state, and USB state rather than using the headline clock rate alone. The published active-mode figure is 290 uA/MHz at 8 MHz and 3.0 V, while the ordering information identifies a 3.6 V supply specification. Confirm the exact recommended operating conditions, voltage tolerance, and current limits in the manufacturer electrical-characteristics table before selecting regulators and decoupling.

Do not assume that another MCU with similar clock and memory ratings is firmware- and pin-compatible. MSP430 interrupt handling, memory organization, USB implementation, peripheral multiplexing, and startup code are device-specific. For a replacement, compare every used pin, its alternate function, supply limits, ADC characteristics, USB routing requirements, and toolchain support before marking the substitute as drop-in.

Treat analog and digital return paths deliberately. Connect analog ground references according to the datasheet's power and layout guidance, keep the ADC input traces short, and minimize coupling from USB, digital clock lines, and switching nodes. The 12-bit converter can resolve small signal changes, but practical measurement accuracy will also depend on the reference design, source impedance, sampling strategy, and calibration procedure.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product and ordering pages are the authoritative sources for current qualification, environmental, and package compliance declarations. No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement appeared in the referenced information.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MSP430F5525IPN datasheet MSP430F5525IPN pinout MSP430F5525IPN datasheet pdf MSP430F5525IPN equivalent MSP430F5525IPN replacement MSP430F5525IPN cross reference MSP430F5525IPN footprint MSP430F5525IPN price MSP430F5525IPN stock Texas Instruments MSP430F5525IPN MSP430F5525IPN 25MHz 64KB flash MSP430F5525IPN LQFP-80 MSP430F5525IPN USB ADC application MSP430F5525IPN vs MSP430F5525UPN

相关元器件 & 术语

Texas Instruments MSP430F5525IPN MSP430F5525UPN MSP430F5525YPN MSP430 MSP430 CPUXV2 mixed-signal microcontroller 16-bit microcontroller embedded controller semiconductor USB device controller 12-bit ADC analog comparator DMA UART SPI I2C hardware multiplier LQFP-80 LQFP package family surface-mount package flash memory SRAM industrial data acquisition environmental monitoring
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情