MSP430F5525IPN - 25MHz 16-Bit USB MCU | Texas Instruments
Артикул: MSP430F5525IPN ✓ АктивенMSP430F5525IPN Обзор
A mixed-signal microcontroller combines a digital processor, analog measurement circuitry, communication peripherals, and embedded memory in one device. The MSP430F5525 belongs to the MSP430 family of ultra-low-power 16-bit processors, which sits within the broader hierarchy of embedded controllers, microcontrollers, and semiconductors. Its integrated peripherals reduce external component count while supporting standalone sensing, control, data acquisition, and USB interface applications.
Core features include a 25 MHz maximum clock, 64 KB of flash program memory, 4 KB of SRAM, a 12-bit analog-to-digital converter, a comparator, direct-memory-access support, and a hardware multiplier. Serial connectivity includes UART, SPI, and I2C interfaces, while the integrated USB capability supports devices that exchange data with a host computer. The manufacturer identifies a low supply-voltage range of 3.6 V, making system-level power planning an important part of the design.
The mixed-signal architecture makes the device appropriate for measurements that must be digitized and then processed locally. Its 12-bit ADC supports analog front-end designs, while the comparator can assist with threshold detection, monitoring, or control functions. DMA can move data between peripherals and system memory with less processor intervention, and the hardware multiplier accelerates suitable arithmetic operations. These resources allow a compact design to combine analog measurement and multiple communication tasks without relying on a separate digital processor.
Typical uses include USB-connected instrumentation, industrial data-acquisition modules, environmental monitoring equipment, portable measurement devices, communication bridges, and embedded control panels. A USB device can use the integrated controller for enumeration and data transfer, while UART, SPI, and I2C provide expansion paths for sensors, displays, transceivers, and external data storage. The 80-pin LQFP also exposes a substantial I/O count for discrete inputs, outputs, and mixed-signal interfaces.
Designers should verify the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before assigning PCB tracks. Decoupling, USB routing, analog grounding, and exposed-pad or thermal requirements must be handled according to the package layout and application reference information. Firmware should also account for clock configuration, memory constraints, USB enumeration behavior, and peripheral-sharing rules when planning system timing.
This page combines manufacturer specifications, package information, application guidance, comparison parameters, and drop-in replacement analysis to support faster engineering review. The MSP430F5525IPN is particularly useful when a design needs 16-bit processing, local analog conversion, several serial interfaces, and USB in a single low-power microcontroller package.
Аналоги без доработки для MSP430F5525IPN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
MSP430F5525UPN
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MSP430F5525YPN
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MSP430F5525IPN Максимальные параметры и электрические характеристики
| Product Type | 16-bit mixed-signal microcontroller (1 count) |
| Максимальная тактовая частота | 25 MHz |
| Flash Program Memory | 64 KB |
| Static RAM | 4 KB |
| ADC Resolution | 12 bits |
| Analog Comparator | 1 integrated comparator |
| DMA Support | Yes (1 integrated DMA controller) |
| UART Interfaces | 1 interface |
| SPI Interfaces | 1 interface |
| I2C Interfaces | 1 interface |
| USB Connectivity | Integrated USB device interface (1 interface) |
| Hardware Multiplier | 1 integrated hardware multiplier |
| Number of I/O Pins | 63 pins |
| Напряжение питания | 3.6 V |
| Active Mode Current | 290 uA/MHz at 8 MHz and 3.0 V |
| Корпус | 80-pin LQFP (PN), 12 mm x 12 mm |
| Тип монтажа | Surface mount |
| Processor Architecture | MSP430 CPUXV2, 16-bit (1 core) |
| Статус RoHS | unknown |
| REACH Status | unknown |
Руководство по цоколевке MSP430F5525IPN в корпусе 80-pin lqfp (pn), 12 mm x 12 mm
Цоколевка для MSP430F5525IPN (корпус 80-pin lqfp (pn), 12 mm x 12 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MSP430F5525IPN.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MSP430F5525IPN подходит для 6 применениеs: USB Data-Acquisition Module, Industrial Sensor Gateway, Portable Environmental Monitor, USB Communication Bridge, Precision Control Panel, Embedded Test and Measurement Instrument.
USB Data-Acquisition Module
The MSP430F5525IPN fits USB data-acquisition modules because it combines a 12-bit ADC with a 25 MHz processor, 64 KB flash, 4 KB SRAM, and integrated USB connectivity. The MCU can digitize analog inputs, perform local filtering or scaling, and transfer records to a host without a separate USB interface IC. DMA can support efficient peripheral transfers, while the UART, SPI, and I2C interfaces allow external sensors, memory, or signal-conditioning stages to be added. The principal design constraint is SRAM capacity: applications requiring long capture buffers need external storage or a streaming architecture.
Industrial Sensor Gateway
The MSP430F5525IPN is appropriate for an industrial sensor gateway that combines local sensing with USB or serial communications. Its 63 I/O pins support discrete sensors and interface signals, while the 12-bit ADC can digitize analog sensor outputs. UART, SPI, and I2C provide flexible links to transceivers, display modules, and external sensors, and the 25 MHz processor can execute protocol and filtering functions. The 64 KB flash supports a substantial embedded application, although production equipment should be qualified against its required temperature, EMC, isolation, and safety conditions.
Portable Environmental Monitor
A portable environmental monitor can use the MSP430F5525IPN to acquire analog sensor data, apply calibration, and communicate results through USB or a serial link. The 12-bit ADC is suitable for many slow-changing temperature, humidity, gas, or air-quality signals, while the comparator can support threshold-based events. The MSP430 architecture supports low-power operation, and published active-mode consumption is 290 uA/MHz at 8 MHz and 3.0 V. Actual battery life must be calculated from the selected sampling interval, sensor duty cycle, USB attachment state, and sleep-mode configuration.
USB Communication Bridge
The MSP430F5525IPN can serve as a USB communication bridge between a host computer and external serial equipment. USB handles enumeration and host connectivity, while UART, SPI, and I2C support downstream sensors, transceivers, and memory devices. The 25 MHz 16-bit processor can perform protocol conversion and buffering, and the 64 KB flash provides room for firmware. Firmware development should include USB endpoint planning, baud-rate or peripheral compatibility checks, timeout handling, and a defined recovery path when the host disconnects.
Precision Control Panel
The MSP430F5525IPN is well suited to a compact control panel that reads analog controls, drives discrete outputs, and reports status over USB or serial links. Its 63 I/O pins reduce the need for external I/O expanders, while the integrated 12-bit ADC provides a consistent measurement interface. UART, SPI, and I2C can connect a display, memory, or communications transceiver. The 80-pin LQFP provides a generous pin budget, although the PCB should isolate analog inputs appropriately and follow the manufacturer's grounding and decoupling recommendations.
Embedded Test and Measurement Instrument
The MSP430F5525IPN can support a compact test and measurement instrument that acquires analog values, controls stimulus, and exports results. The 12-bit ADC handles measurements within its specified operating conditions, the comparator supports threshold or trigger functions, and the hardware multiplier assists suitable arithmetic. USB provides a direct connection to a host for configuration and result export, while SPI and I2C can connect precision converters or displays. Calibration constants and measurement uncertainty should be established using the electrical characteristics and application conditions defined in the manufacturer datasheet.
Справочные инженерные данные для MSP430F5525IPN — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MSP430F5525UPN | MSP430F5525YPN |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 80-LQFP (PN), 12 mm x 12 mm | 80-LQFP (PN) | 80-LQFP (PN) |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz |
| Flash Program Memory | 64 KB | 64 KB | 64 KB |
| Static RAM | 4 KB | 4 KB | 4 KB |
| ADC Resolution | 12 bits | 12 bits | 12 bits |
| Serial Interfaces | UART, SPI, and I2C | UART, SPI, and I2C | UART, SPI, and I2C |
| USB Connectivity | Integrated | Integrated | Integrated |
| Number of I/O Pins | 63 pins | 63 pins | 63 pins |
| Supply Voltage | 3.6 V | 3.6 V | 3.6 V |
| Analog Comparator | Integrated | Integrated | Integrated |
| DMA Support | Yes | Yes | Yes |
Ключевые отличия
- Combines USB, mixed-signal conversion, and multiple serial interfaces (против MSP430F5525UPN)
- Provides a complete embedded control and measurement peripheral set (против MSP430F5525YPN)
- Supports USB-connected embedded designs without a separate USB interface controller (против Generic non-USB microcontrollers)
Заметки по проектированию
Assign USB, power, ground, analog-input, and debug connections directly from the MSP430F5525 datasheet pin table and PN-package drawing. Preserve the recommended decoupling capacitors adjacent to their associated supply pins and route sensitive analog inputs away from USB and high-current switching paths. Because alternate functions are multiplexed among package pins, finalize peripheral assignments before committing to the 80-LQFP footprint.
Build the power budget from the operating mode, peripheral load, GPIO state, and USB state rather than using the headline clock rate alone. The published active-mode figure is 290 uA/MHz at 8 MHz and 3.0 V, while the ordering information identifies a 3.6 V supply specification. Confirm the exact recommended operating conditions, voltage tolerance, and current limits in the manufacturer electrical-characteristics table before selecting regulators and decoupling.
Do not assume that another MCU with similar clock and memory ratings is firmware- and pin-compatible. MSP430 interrupt handling, memory organization, USB implementation, peripheral multiplexing, and startup code are device-specific. For a replacement, compare every used pin, its alternate function, supply limits, ADC characteristics, USB routing requirements, and toolchain support before marking the substitute as drop-in.
Treat analog and digital return paths deliberately. Connect analog ground references according to the datasheet's power and layout guidance, keep the ADC input traces short, and minimize coupling from USB, digital clock lines, and switching nodes. The 12-bit converter can resolve small signal changes, but practical measurement accuracy will also depend on the reference design, source impedance, sampling strategy, and calibration procedure.
Информация о соответствии
The manufacturer product and ordering pages are the authoritative sources for current qualification, environmental, and package compliance declarations. No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement appeared in the referenced information.